Phone Car Kits

1. Material: environmentally friendly soft TPU2. Gross weight: 133g3. Size: 11x6.5x4cm4. Easy to operate, can be installed at will5. Applicable models: universal for mobile phones with large and small screens

Read more less

1. Material: aluminum alloy2. Applicable mobile phone size: 4-6.5 inch mobile phone3. Dimensions: 10.4 x 3.57 x 1.29 cm4. Alloy metal material, sturdy and durable5. Upgrade silicone plug, easy to install6. Anti-vibration foam design to prevent noise7. Small size, does not take up space

Read more less

1. Material: aluminum alloy2. Applicable mobile phone size: 4-6.5 inch mobile phone3. Dimensions: 10.4 x 3.57 x 1.29 cm4. Alloy metal material, sturdy and durable5. Upgrade silicone plug, easy to install6. Anti-vibration foam design to prevent noise7. Small size, does not take up space

Read more less

1. Components: a large non-slip mat + two bracket buckles2. Size: large non-slip mat (11CM x 9CM)3. Frame buckle: 5CM x 4CM4. Single weight: 50 grams5. Material: Food grade silicone6. Convenience: dismantle at will, carry at will, use at will.7. Safety: It is safe to use and prevent the load from being broken.8. Environmental protection: This product is non-toxic, non-polluting, and non-benzene release.9. Non-staining: no glue will fall off, will not stain your hands, and will not stain the surface of the article.10. Temperature resistance: high temperature resistance, low temperature resistance, through the heat-proof, anti-freeze and sunscreen test, its use properties remain unchanged at 200 degrees Celsius and minus 40 degrees.11. Durability: It is durable and can be used repeatedly for more than 5 years without aging. Its fixing force and elasticity will not decrease, and the effect will not change.12. Easy to clean: non-sticky oil stains. When oil stains or dust stains, it will affect the anti-slip performance. When cleaning, you don't need any detergent, just rinse with water, don't need to wipe it with a cloth, and then return to the original use after gently drying with your hands. effect.

Read more less

Features:1. One-handed pick-and-place, charge at once2. Multi-level strong magnetic arrangement, stable adsorption3. FOD induction charging, use more at ease4. 360 degree rotation, angle of view can be adjusted arbitrarily5. Rubber pad, non-slip and scratch-resistant6. Multiple protection, smart chip protection7. Two installation bases are delivered, back clamp type/suction cup typeParameter:1 Output: 12V2. Power: 10W, 7.5W, 5W3. Charging distance: less than or equal to 8mm4. Dimensions: 59 x 95 x 29mm5. Interface: USB6. Material: ABS+silicone7. Function: The built-in magnet attracts the mobile phone and does not fall off, while navigating while charging8. Weight: 45g9. Charging current: 1500mA10. Input voltage: 5V/2A, 9V/1.3A

Read more less

Features:1. One-handed pick-and-place, charge at once2. Multi-level strong magnetic arrangement, stable adsorption3. FOD induction charging, use more at ease4. 360 degree rotation, angle of view can be adjusted arbitrarily5. Rubber pad, non-slip and scratch-resistant6. Multiple protection, smart chip protection7. Two installation bases are delivered, back clamp type/suction cup typeParameter:1 Output: 12V2. Power: 10W, 7.5W, 5W3. Charging distance: less than or equal to 8mm4. Dimensions: 59 x 95 x 29mm5. Interface: USB6. Material: ABS+silicone7. Function: The built-in magnet attracts the mobile phone and does not fall off, while navigating while charging8. Weight: 45g9. Charging current: 1500mA10. Input voltage: 5V/2A, 9V/1.3A

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 380 grams3. Dimensions: Small four-claw approximately 5.5x9.7 cm, large four-claw approximately 7.5x13.5 cm, six-claw approximately 5.5x9.7 cm, flat clamp approximately 14-28x7.7 cm, connecting rod approximately 6.5/9.5 cm4. Application: cars, motorcycles, etc.5. Installation parts: car headrest, motorcycle rearview mirror, etc.6. Features: thickened rubber cushion to protect the phone from hurting the car, high-hardness rubber universal ball, stable clamping, no noise, 360-degree rotatable, easy to install

Read more less

Features:1. One-handed pick-and-place, charge at once2. Multi-level strong magnetic arrangement, stable adsorption3. FOD induction charging, use more at ease4. 360 degree rotation, angle of view can be adjusted arbitrarily5. Rubber pad, non-slip and scratch-resistant6. Multiple protection, smart chip protection7. Two installation bases are delivered, back clamp type/suction cup typeParameter:1 Output: 12V2. Power: 10W, 7.5W, 5W3. Charging distance: less than or equal to 8mm4. Dimensions: 59 x 95 x 29mm5. Interface: USB6. Material: ABS+silicone7. Function: The built-in magnet attracts the mobile phone and does not fall off, while navigating while charging8. Weight: 45g9. Charging current: 1500mA10. Input voltage: 5V/2A, 9V/1.3A

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 380 grams3. Dimensions: Small four-claw approximately 5.5x9.7 cm, large four-claw approximately 7.5x13.5 cm, six-claw approximately 5.5x9.7 cm, flat clamp approximately 14-28x7.7 cm, connecting rod approximately 6.5/9.5 cm4. Application: cars, motorcycles, etc.5. Installation parts: car headrest, motorcycle rearview mirror, etc.6. Features: thickened rubber cushion to protect the phone from hurting the car, high-hardness rubber universal ball, stable clamping, no noise, 360-degree rotatable, easy to install

Read more less

1. Material: plastic, aluminum alloy2. Weight: about 272 grams3. Dimensions: 140-280mm about 16x7.7 cm, 113-145mm about 12.5x11.4 cm4. Clamping size: 140-280/113-145mm mobile phone or tablet5. Fixed part: car headrest6. Features: simple and convenient installation, no damage to the body, stable and not easy to shake, wear-resistant and fall-resistant, durable

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 380 grams3. Dimensions: Small four-claw approximately 5.5x9.7 cm, large four-claw approximately 7.5x13.5 cm, six-claw approximately 5.5x9.7 cm, flat clamp approximately 14-28x7.7 cm, connecting rod approximately 6.5/9.5 cm4. Application: cars, motorcycles, etc.5. Installation parts: car headrest, motorcycle rearview mirror, etc.6. Features: thickened rubber cushion to protect the phone from hurting the car, high-hardness rubber universal ball, stable clamping, no noise, 360-degree rotatable, easy to install

Read more less

Features:1. One-handed pick-and-place, charge at once2. Multi-level strong magnetic arrangement, stable adsorption3. FOD induction charging, use more at ease4. 360 degree rotation, angle of view can be adjusted arbitrarily5. Rubber pad, non-slip and scratch-resistant6. Multiple protection, smart chip protection7. Two installation bases are delivered, back clamp type/suction cup typeParameter:1 Output: 12V2. Power: 10W, 7.5W, 5W3. Charging distance: less than or equal to 8mm4. Dimensions: 59 x 95 x 29mm5. Interface: USB6. Material: ABS+silicone7. Function: The built-in magnet attracts the mobile phone and does not fall off, while navigating while charging8. Weight: 45g9. Charging current: 1500mA10. Input voltage: 5V/2A, 9V/1.3A

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 334 grams3. Size: the four-jaw back clip is about 5.5x9.5 cm, and the clamping range of the folding flat buckle back clip is about 12.8-14 cm.4. Application: the four-jaw back clip is suitable for 3.5-7 inch mobile phones, and the folding flat buckle back clip is suitable for 10.5-12.3 inch tablets5. Applicable models: cars, trucks, buses, etc.6. Scope of application: back clip transfer / compatible RAM7. Features: thick rubber cushion to protect the mobile phone from hurting the car, high-hardness rubber universal ball, stable clamping, no sound, 360-degree rotatable, suction cup switch paddle, easy to disassemble

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 380 grams3. Dimensions: Small four-claw approximately 5.5x9.7 cm, large four-claw approximately 7.5x13.5 cm, six-claw approximately 5.5x9.7 cm, flat clamp approximately 14-28x7.7 cm, connecting rod approximately 6.5/9.5 cm4. Application: cars, motorcycles, etc.5. Installation parts: car headrest, motorcycle rearview mirror, etc.6. Features: thickened rubber cushion to protect the phone from hurting the car, high-hardness rubber universal ball, stable clamping, no noise, 360-degree rotatable, easy to install

Read more less

1. Material: plastic, aluminum alloy2. Weight: about 272 grams3. Dimensions: 140-280mm about 16x7.7 cm, 113-145mm about 12.5x11.4 cm4. Clamping size: 140-280/113-145mm mobile phone or tablet5. Fixed part: car headrest6. Features: simple and convenient installation, no damage to the body, stable and not easy to shake, wear-resistant and fall-resistant, durable

Read more less

1. Support 4-6.2 inch mobile phone2. The three sides are locked tightly to prevent falling3. The silicone clip rotates 360 degrees and supports horizontal and vertical design of the air outlet4. The air outlet is reserved at the bottom, which does not block the charging/listening function5. Non-slip silicone pad to prevent scratching the phone6. Hook and grab design to prevent falling off7. Dimensions: 92x89x88 mm8. Weight: 95 grams

Read more less

1. Support 4-6.2 inch mobile phone2. The three sides are locked tightly to prevent falling3. The silicone clip rotates 360 degrees and supports horizontal and vertical design of the air outlet4. The air outlet is reserved at the bottom, which does not block the charging/listening function5. Non-slip silicone pad to prevent scratching the phone6. Hook and grab design to prevent falling off7. Dimensions: 92x89x88 mm8. Weight: 95 grams

Read more less

1. Material: ABS, acrylic glass2. Applicable mobile phones: 4.0-6.5 inch models universal3. Installation position: both horizontal and vertical air outlets of the car4. Size: about 13.94x9.1x8 cm5. Weight: about 80 gramsFeatures:1. The extended stand base design does not block the air outlet of the air conditioner and protects the phone2. Use glass mirror back, smooth and round, not hurting the phone3. Three-point support, stable and safe, not easy to shake4. The reserved interface is convenient for charging and does not affect normal operation5. Universal ball design on the back, easy to adjust the angle at any time6. Soft silicone, shockproof and protect the phone7. Double-joint rotation design, more flexible angle adjustment

Read more less

1. Support 4-6.2 inch mobile phone2. The three sides are locked tightly to prevent falling3. The silicone clip rotates 360 degrees and supports horizontal and vertical design of the air outlet4. The air outlet is reserved at the bottom, which does not block the charging/listening function5. Non-slip silicone pad to prevent scratching the phone6. Hook and grab design to prevent falling off7. Dimensions: 92x89x88 mm8. Weight: 95 grams

Read more less

1. Support 4-6.2 inch mobile phone2. The three sides are locked tightly to prevent falling3. The silicone clip rotates 360 degrees and supports horizontal and vertical design of the air outlet4. The air outlet is reserved at the bottom, which does not block the charging/listening function5. Non-slip silicone pad to prevent scratching the phone6. Hook and grab design to prevent falling off7. Dimensions: 92x89x88 mm8. Weight: 95 grams

Read more less

1. Material: ABS, silicone2. Purpose: car air outlet bracket3. Features: one-handed operation, convenient and fast, accurate in place, triangular fixed, stable and not easy to shake, miniature, small and compact, wear-resistant and durable4. Size: about 9.2x5.6x6.9 cm/piece5. Weight: about 25g/piece

Read more less

1. Clever use of mobile phone gravity free linkage, more stable and reliable 2. Triangular characteristics, stable as Mount Tai, without fear of speed bumps, sudden braking, etc. 3. Upgrade the silicone cushion to strengthen the buffer protection and protect the phone 4. Built-in universal ball, 360 degree rotation to meet the needs of viewing angle 5. Reserve a charging hole for more convenient charging

Read more less

1. The double triangle law firmly supports 2. Intelligent gravity sensor, one-handed operation 3. 360-degree three-dimensional rotation, comfortable vision 4. Aviation metal alloy, durable 5. Do not block the sight of driving and operate without hindrance

Read more less

1. Material: ABS2. Applicable size: 4.7-12.3 inches3. Reserve a charging hole for easy use4. The shaft can be rotated 360 degrees, and the angle direction can be adjusted freely5. Anti-slip silicone pad design of the chuck, anti-slip, prevent scratching the plate6. The installation is quick and simple, and easy to operate7. Weight: 320g

Read more less

1. Material: Plastic2. Weight: About 133 grams3. Dimensions: The paste type and magnetic + paste type are about 5.5x7.1 cm, the diameter of the ball-head is about 1.7 cm, the screw joint type is about 5.5x5.1 cm, the thread is 6mm4. Application: Universal for mobile phones, cameras and recorders5. Features: Simple and convenient installation, no damage to the body, stable and not easy to shake, wear-resistant and fall-resistant, durable

Read more less

1. Ten times the suction power, stable and reliable2. Close the magnetic field, the signal is unimpeded3. 360 degree multi-angle arbitrary adjustment4. Features: strong suction, safe and stable, one-handed operation, easy to use, cute appearance5. Material: PC6. Weight: about 60g

Read more less

1. Material: silicone, aluminum alloy2. Use scene: rear pillow bracket3. Adjust the angle: 360 degree rotation4. Installation method: extension button5. Multiple silicone design, non-slip, protect equipment, safer to use6. Adopting a three-stage design, each part is closely connected, with good stability and no fear of bumps7. Can be clamped range: ordinary models: 11-20.5 cm, upgrade models: 14-26 cm8. Snap-in design, strong grip, stable and not shaking

Read more less

1. Easy to use, reserved charging hole2. Do not block the phone buttons, while navigating and charging3. Imitate the side structure of the mobile phone, non-slip silicone pad4. Doubly stable, double triangle fixed5. Easy installation, firm clamping, stable and not falling off6. Automatic telescopic, one-handed operation7. Material: aluminum alloy8. Features: hard and scratch-resistant, free rotation, gravity linkage9. Applicable mobile phone size: 4.7-6.5 inches

Read more less

1. Easy to use, reserved charging hole2. Do not block the phone buttons, while navigating and charging3. Imitate the side structure of the mobile phone, non-slip silicone pad4. Doubly stable, double triangle fixed5. Easy installation, firm clamping, stable and not falling off6. Automatic telescopic, one-handed operation7. Material: aluminum alloy8. Features: hard and scratch-resistant, free rotation, gravity linkage9. Applicable mobile phone size: 4.7-6.5 inches

Read more less

1. Material: PC + silica gel + rare earth neodymium magnet2. Suitable for mobile phones: 3-7 inch mobile phones3. Suitable installation position: car dashboard/rearview mirror/sun visor4. 1.5mm thick silicone to protect cars and mobile phones5. Stainless steel spring fixed, stable support, not easy to fall6. Strong neodymium magnet, strong adsorption, not afraid of various bumpy road conditions7. Can be rotated 360 degrees, folded 90 degrees8. Small size, not blocking the line of sight, can be operated with one hand9. Dimensions: 7 x 8 cm

Read more less

1. Material: silicone, aluminum alloy2. Use scene: rear pillow bracket3. Adjust the angle: 360 degree rotation4. Installation method: extension button5. Multiple silicone design, non-slip, protect equipment, safer to use6. Adopting a three-stage design, each part is closely connected, with good stability and no fear of bumps7. Can be clamped range: ordinary models: 11-20.5 cm, upgrade models: 14-26 cm8. Snap-in design, strong grip, stable and not shaking

Read more less

1. Material: PC + silica gel + rare earth neodymium magnet2. Suitable for mobile phones: 3-7 inch mobile phones3. Suitable installation position: car dashboard/rearview mirror/sun visor4. 1.5mm thick silicone to protect cars and mobile phones5. Stainless steel spring fixed, stable support, not easy to fall6. Strong neodymium magnet, strong adsorption, not afraid of various bumpy road conditions7. Can be rotated 360 degrees, folded 90 degrees8. Small size, not blocking the line of sight, can be operated with one hand9. Dimensions: 7 x 8 cm

Read more less

1. Easy to use, reserved charging hole2. Do not block the phone buttons, while navigating and charging3. Imitate the side structure of the mobile phone, non-slip silicone pad4. Doubly stable, double triangle fixed5. Easy installation, firm clamping, stable and not falling off6. Automatic telescopic, one-handed operation7. Material: aluminum alloy8. Features: hard and scratch-resistant, free rotation, gravity linkage9. Applicable mobile phone size: 4.7-6.5 inches

Read more less

1. Ten times the suction power, stable and reliable2. Close the magnetic field, the signal is unimpeded3. 360 degree multi-angle arbitrary adjustment4. Features: strong suction, safe and stable, one-handed operation, easy to use, cute appearance5. Material: PC6. Weight: about 60g

Read more less

1. Material: PC + silica gel + rare earth neodymium magnet2. Suitable for mobile phones: 3-7 inch mobile phones3. Suitable installation position: car dashboard/rearview mirror/sun visor4. 1.5mm thick silicone to protect cars and mobile phones5. Stainless steel spring fixed, stable support, not easy to fall6. Strong neodymium magnet, strong adsorption, not afraid of various bumpy road conditions7. Can be rotated 360 degrees, folded 90 degrees8. Small size, not blocking the line of sight, can be operated with one hand9. Dimensions: 7 x 8 cm

Read more less

1. Stable adsorption, one-time clamping2. Telescopic design, simpler operation, mobile phone within reach, safe driving without blocking the field of vision3. Nano silicone sticky suction cup, the suction is still strong after cleaning4. 15.5cm telescopic pole, humanized design5. Precise gears, gravity linkage, durable, no deformation, no abnormal noise, stronger and quieter6. High-gloss mirror, stable and not loose, with extraordinary texture7. Anti-slip mat design improves the stability of the phone and protects the frame of the phone8. Thickened lower arm design, silicone cushioning and non-slip9. One-handed pick-and-place, stable when placed10. Features: telescopic design, powerful suction cup, no abnormal noise, stable triangle, gravity linkage11. Applicable mobile phone size: 4-7.2 inches12. Material: ABS+Aluminum Alloy+Nano PU Adhesive13. Size: about 11x19cm

Read more less

1. compact and safe (do not block the view, do not damage the phone, do not block the signal)2.Pick with one hand and place (one hand operable, safe driving)3. Support for your mobile phone4.Car / car phone holder5.Magnetic mobile phone holder is suitable for many occasions such as car, office and home.

Read more less

1.Works with all smartphones and GPS devices, can contain devices included in cases and housings2.Avoid scratches and device drops3.Provides easy access to the mounted device4.Rubber grip on magnetic surface offers additional protection5.Easy to assemble

Read more less

1.Pick up and drop off, easy to use in the car2.Tougher arm with adjustable steering.3.The suction cups are powerful and adjustable.4.The support frame is strong and difficult to shake.5.Can be placed on the front gear, with strong adhesion, does not shake, falls off, and the angle can be adjusted.6.By using the Adhesive Closure, it will not obstruct the front view.

Read more less

1.Position in any orientation, horizontal or vertical.2.Strong sticky suction cup can be cleaned with warm water and air dried.3.The strong material holds the phone firmly, put it on with one hand and remove it quickly and easily.4.Flexible and high quality, easy to install5.Secure hold power on the dashboards, windshields, countertops, desks, tables and other surfaces.

Read more less

1.Modern and unique design, lightweight and portable, Just put the phone on the magnetic card to hold the phone firmly.2.Comfortable to use; No blocking for driving view and save space in the car.3.You can position any angle as your wishes.4.It can be adjusted up and down, compatible with all phones.5.Compatible with smartphones

Read more less

1.Easy to install,no tools required.eliminates the unsightly features of most car mounts,direct to install on car air vent or dashboard or windshield.2.suction cup attach to windshield, dashboard or most smooth flat surfaces. They will not fall off even in turns, bumps or when the speed too fast.3.Easy to install one-hand operation, no tools required.4.Make sure the bracket is glued firmly to ensure that the bracket will not fall off while driving.5.It will not harm any smart phone.

Read more less

1. compact and safe (do not block the view, do not damage the phone, do not block the signal)2.Pick with one hand and place (one hand operable, safe driving)3. Support for your mobile phone4.Car / car phone holder5.Magnetic mobile phone holder is suitable for many occasions such as car, office and home.

Read more less

1.Magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction.2.Which can stick firmly to any plane of the car, fix your device,. It adapts to a variety of road conditions, such as sudden braking, speed bump, and rough mountain road.3.Mini size, does not take up space, it is placed on the dash without blocking the view, and you do not need to look down the device to ensure safe driving.4. You can rotate your smartphone in any orientation (horizontal or vertical) and at any angle of flexibility, giving you the best viewing experience. 5.This magnetic car mount does not block the view of the windshield or the air outlet, it is safer when driving.

Read more less

1.compact and safe (do not block the view, do not damage the phone, do not block the signal)2. Pick with one hand and place (one hand operable, safe driving)3. Mobile phone accessories holder4.Magnetic mobile phone holder is suitable for many occasions such as car, office and home.5.Elegant, exquisite and simple design, suitable for various places and cars.

Read more less

1.Magnetic car mount has enhanced magnetic force, firmly holds any smartphone, GPS ,this car phone mount will firmly hold your cell phone in place whether driving on a bumpy road or brake suddenly. 2.And you can just take your smartphone with one hand within a split second. Let you drive safer and more comfortable.3.Operate your phone with one hand, rotate your device and swivel your display as your wish Infinite Viewing Angles.4.This universal car phone holder comes with 360 adjustable degree joint. Easily adjust position of your phone, so that you can get perfect sight. Open your sight and no block in sight to ensure safe driving. Even without phone on, this car mount can merge into the interior of your car perfectly.5. magnetic car mount is compatible with all cellphones

Read more less

1.Pick up and drop off, easy to use in the car2.Tougher arm with adjustable steering.3.The suction cups are powerful and adjustable.4.The support frame is strong and difficult to shake.5.Can be placed on the front gear, with strong adhesion, does not shake, falls off, and the angle can be adjusted.6.By using the Adhesive Closure, it will not obstruct the front view.

Read more less

1.Large square magnetic surface, with more firm attraction2.Applicable to the console, compact, does not take up much space3.Magnetic mobile phone holder is suitable for many occasions such as car, office and home.4.Elegant, exquisite and simple design, suitable for various places and cars.5.Magnetic Bracket 360 Degree Rotating Bracket Holder Car Mobile Phone Holder

Read more less