Consumer Electronics

Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mmSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs 40HQ: 919 cartons * 100 pcs = 91900 pcs

Read more less

1. Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack (extended from USB) 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive 6. Onboard PoE header, for connecting PoE HATsSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

1. Zero can be easily attached via specially designed connectors 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. The same GPIO header height as 3B, easily connecting with 3B series HATs or development projects 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptiveSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

1. Universal: Low Profile, PWM Speed Adjustment 2. Interface: 4-wire PWM speed control fan connector 3. Rated speed: 8000+/-10%RPM 4. Rated power: 1.62W (12V, 0.135+/-0.02A) 5. Cable length: 125+/-10mm Package list: 1. CM4-FAN-3007-B x 1 2. Screws and thermal tapes x 1Specification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 12.00kgs / 26.46lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

1. 172 x 320 resolution, 262K RGB colors, clear and colorful displaying effect 2. SPI interface, mini mizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32 3. Come with development resources (examples for Raspberry Pi/Arduino/STM32) 4. Working voltage: 3.3V/5V 5. Resolution: 172 x 320 pixels 6. Communication interface: 4-wire SPI 7. Display size: 17.39 x 32.35mm 8. Display panel: IPS 9. Pixel pitch: 0.0337 x 0.1011mm 10. Driver: ST7789V3 11. Dimensions: 22.0 x 38.5mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 300 pcs = 222000 pcs 40HQ: 1717 cartons * 300 pcs = 515100 pcs

Read more less

Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use 3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 4. Adjustable motor drive current via potentiometer, maximum 2.5A current output 5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) 6. Integrates 5V regulator, allows providing power to Raspberry Pi 7. Onboard multi connector options for stepper motors in different specifications 8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)Specifications1. Motor controller: HR8825 2. Motor drive voltage: 8.2V~28V 3. Motor drive current: 2.5A 4. Logic voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Size: 65 x 56mmPackage List1. Stepper Motor HAT (B) x 1 2. RPi screws pack (2pcs) x 1 3. Aluminum heatsink x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Features1. 2.8-inch IPS capacitive touch screen with a hardware resolution of 480 x 640. 2. Capacitive 5-point touch control. 3. Tempered glass capacitive touch panel, hardness up to 6H. 4. Drive LCD directly through Raspberry Pi DSI interface with a refresh rate of up to 60Hz. 5. Working with Raspberry Pi, supports Raspberry Pi OS system. 6. Support Pi 4B/3B+/3A+, CM3+/4 must be used with an adapter board. 7. Backlight brightness control by the software.Package List1. 2.8 inch DSI LCD x1 2. FPC 15PIN 1.0 pitch 50mm (opposite sides) x2Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 33cm * 32cm / 20.47inch * 12.99inch * 12.6inch Loading Container 20GP: 485 cartons * 200 pcs = 97000 pcs 40HQ: 1127 cartons * 200 pcs = 225400 pcs

Read more less

1. Product name: USB video capture card 2. Input: HDMI, 4K (3840 x 2160 30Hz) 3. HDMI: 1.4B Compatible 4. Output: - USB2.0, 1080P (1920 x 1080 30Hz) - Support custom resolution - Supports YUV and JPEG modes - USB1.1 compatible, UVC1.0 protocol compatible 5. Audio: Synchronize audio and video 6. System support: Windows, Linux, macOS, Android 7. Software support: OBS, Potplayer, QuickTime, XSplit, etc.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 1cm / 3.94inch * 3.15inch * 0.39inch Qty per Carton 600 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 600 pcs = 339600 pcs 40HQ: 1314 cartons * 600 pcs = 788400 pcs

Read more less

1. 3.5 inch IPS screen, hardware resolution is 640 ?? 480. 2. 5-point capacitive touch, tempered glass panel, hardness up to 6H. 3. When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie. 4. When used with Tinker Board 2, it supports Android / Debian. 5. Ubuntu is supported when used with Jetson Nano. 6. When used as a computer monitor, supports Windows 11/10/8.1/8/7. 7. Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios. 8. With 3.5mm audio and speaker interface, support HDMI audio output.Specification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 16cm * 15cm * 5cm / 6.3inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 33cm * 32cm / 20.47inch * 12.99inch * 12.6inch Loading Container 20GP: 485 cartons * 40 pcs = 19400 pcs 40HQ: 1127 cartons * 40 pcs = 45080 pcs

Read more less

Features1. Onboard switch chip, 5x ports 10/100/1000M non-blocking switch architecture 2. Full-duplex 10/100/1000M support for each port (the half-duplex 100M connection is only supported on 10/100M mode) 3. Full/Half-duplex operations with IEEE 802.3x flow control and back pressure support 4. Allow forwarding 9216 bytes huge data packet on linear speed 5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply 6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing 7. 5~36V wide voltage power supply, dual power interface (DC interface and terminal block) onboard overvoltage protection, reverse connection protection. 8. Support 25mm standard rail.Package List1. Gigabit-Switch-5P x 1 2. Power supply screw terminal x 1 3. 12V 1A power adapter x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 80 Carton Weight 18.50kgs / 40.79lb Carton Size 50cm * 52cm * 32cm / 19.69inch * 20.47inch * 12.6inch Loading Container 20GP: 320 cartons * 80 pcs = 25600 pcs 40HQ: 744 cartons * 80 pcs = 59520 pcs

Read more less

Features1. I2C bus, allows expanding 16 I/O ports by just using two wires 2. Support driving 16-ch common anode constant current LED, 256-step linear dimming, current controllable 3. Output interrupt (INT) signal when changing the state of an input port 4. I2C address configurable by shorting the A0/A1 jumpers 5. Provide two connector options: PH2.0 header and/or solder pads, allows multi I2C modules to be stacked 6. Onboard voltage translator, compatible with 3.3V/5V level 7. Come with development resources and manual (examples for Raspberry Pi / micro:bit / Arduino / STM32)Specifications1. Working voltage: 2.4-5.5V 2. Working temperature: -40-85 degree c 3. Low Standby Current: Less than 0.1uA 4. Control interface: I2C 5. Expansion I/O pins: 16 6. Size: 38x23mmPackage List1. AW9523B IO Expansion Board x 1 2. PH2.0 6PIN wire x 1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 500 pcs = 250000 pcs 40HQ: 1162 cartons * 500 pcs = 581000 pcs

Read more less

1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver 3. Features RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ningproof & anti-electrostatic 5. Onboard digital isolation chip, safer signal isolation communication and better stability and anti-interference 6. Reserved control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python)Specifications1. CAN Controller: MCP2515 2. CAN transceiver: SIT65HVD230DR 3. RS485 transceiver: SP3485 4. Working voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Dimensions: 100 x 79 mmPackage List1. RS485 CAN for Jetson Nano x1 2. Screws pack x1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 7cm * 2cm / 4.72inch * 2.76inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs 40HQ: 1162 cartons * 200 pcs = 232400 pcs

Read more less

About The ProtuctThe PI4-CASE-ARGON-ONE-M.2 metal case can greatly speed up the boot and storage speed of the Raspberry Pi, which is to extend the M.2 interface through the USB interface and use an external SSD as the main storage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot speed much faster than using the SD card.Features1. Aluminum alloy material, modern space grey finish, robust and nice looking 2. Magnetic Design: Magnetic removable top and well designed GPIO header 3. M.2 Expansion Slot: Support M.2 modules like M.2 SSD, which is then connected to the Pi by USB adapter 4. Active + Passive Cooling: The whole case top acts as a Passive cooling for the Raspberry Pi, combined With the Included cooling fan and multiple airflow vents, brings excellent cooling effect 5. Neat Cable Management: All of the ports are accessed at the back, minimal cable clutter 6. Proper Bottom Design: Two airflow vents and four nonskid feet, simple but useful 7. Easy Assembly: Just a few steps to go, no messy wiring, no wrong connection, more stable, more safeSpecification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 25cm * 15cm * 5cm / 9.84inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 11.50kgs / 25.35lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 40 pcs = 15840 pcs 40HQ: 919 cartons * 40 pcs = 36760 pcs

Read more less

1. ABS protection case For Raspberry Pi Zero Series, Fits Zero / Zero 2 W 2. Protective cover is sturdy and long-lasting, designed with compact size and light weight. 3. Precise Opening Design: Reversed GPIO slot and openings for sorts of connectors 4. Easy to install 5. Package Content: - Raspberry Pi Zero case x 1 - Screwdriver x 1 - Screws pack x 1Specification: Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs 40HQ: 1439 cartons * 200 pcs = 287800 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller 3. One-way mirror, can display news, weather and time. 4. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 5. Embedded ferrite Hi-Fi speaker. 6. Embedded Microphone And Speaker, Adopts Snowboy Hotword Detection Engine. 7. 75 x 75mm spacing mounting holes (M4 screw hole) for a general wall mount. 8. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch Magic Mirror x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 2.50kgs / 5.51lb One Package Size 45cm * 27cm * 9cm / 17.72inch * 10.63inch * 3.54inch Qty per Carton 10 Carton Weight 18.50kgs / 40.79lb Carton Size 47cm * 55cm * 45cm / 18.5inch * 21.65inch * 17.72inch Loading Container 20GP: 229 cartons * 10 pcs = 2290 pcs 40HQ: 532 cartons * 10 pcs = 5320 pcs

Read more less

Features1. Mini computer chassis, robust and dust-proof, nice looking 2. Tailored For Compute Module 4 IO Board: Make it easy to build your own Raspberry Pi CM4 mini PC 3. Break-out 40PIN GPIO Header: The standard 40 PIN GPIO header is still available, make it easy to connect sorts of HATs 4. Precise cut-out with clear label: Each cut-out Is completely aligned with the connector 5. Come with cooling fan, combined with airflow vent, better heat dissipation 6. Application: Binocular vision, PoE powered Raspberry Pi Projects, or other industrial contextPackage List1. Metal case (top and bottom) x 1 2. 40PIN GPIO adapter x 1 3. Fan-4010-PWM-12V x 1 4. Screwdriver x 1 5. Screws pack x 1Specification: Package Weight One Package Weight 0.54kgs / 1.19lb One Package Size 25cm * 15cm * 5cm / 9.84inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 19.50kgs / 42.99lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 40 pcs = 15840 pcs 40HQ: 919 cartons * 40 pcs = 36760 pcs

Read more less

Features1. Build a shiny mini computer with this decent aluminum case custom made for the Raspberry Pi 4 2. Stylish Aluminum Alloy Housing: Aluminum housing with modern space grey finish, sturdy and beautiful 3. Removable Top and GPIO Recess: The neat GPIO recess and magnetic removable top are both beautiful and protective, and there are even clear pin labels and color-coded headers to make it easier to use 4. "Always on" feature: automatically starts the Pi and runs the fan on power up, enabled via jumper 5. Amazing temperature management: The extended post makes the aluminum case a large heat sink to transfer heat from the board, combined with a cooling fan and multiple vents, the cooling canot be better 6. Neat cable management: All ports are accessed at the back, minimizing cable clutter 7. Safe and convenient power button: Dedicated power button, combined with a one-line script, turns the computer on/off while keeping the stored files safe, and also supports custom functions 8. Easy to assemble, no messy lines: comes with two PCB boards, easy to build, no messy lines, no wrong connections, more stable and safer 9. Proper bottom design: TF card slot on bottom, as well as two vents and four rubber feetSpecification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 25cm * 15cm * 5cm / 9.84inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 9.50kgs / 20.94lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 40 pcs = 15840 pcs 40HQ: 919 cartons * 40 pcs = 36760 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller. 3. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 4. Embedded ferrite Hi-Fi speaker. 5. Embedded microphone and speaker, adopts snowboy hotword detection engine. 6. 75x75mm spacing mounting holes (M4 screw hole). 7. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch PiPad x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 1.17kgs / 2.58lb One Package Size 36cm * 26cm * 6cm / 14.17inch * 10.24inch * 2.36inch Qty per Carton 10 Carton Weight 13.00kgs / 28.66lb Carton Size 53cm * 32cm * 37cm / 20.87inch * 12.6inch * 14.57inch Loading Container 20GP: 424 cartons * 10 pcs = 4240 pcs 40HQ: 986 cartons * 10 pcs = 9860 pcs

Read more less

1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. Come with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32) Specifications: 1. Operating voltage: 3.3V 2. Interface: 3-wire SPI, 4-wire SPI 3. Outline dimension: 68.1 x 37.9 x 0.85mm 4. Display size: 52.096 x 29.568mm 5. Dot pitch: 0.176 x 0.176mm 6. Resolution: 296 x 168 pixels 7. Display color: Red/Yellow/Black/White 8. Grey level: 2 9. Full refresh time: 12s 10. Refresh power: Less than 57mW (typ.) 11. Standby power: Less than 0.01uA (almost none) 12. Viewing angle: Greater than 170 degreeSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 6cm * 1cm / 3.15inch * 2.36inch * 0.39inch Qty per Carton 400 Carton Weight 5.00kgs / 11.02lb Carton Size 42cm * 32cm * 18cm / 16.54inch * 12.6inch * 7.09inch Loading Container 20GP: 1102 cartons * 400 pcs = 440800 pcs 40HQ: 2558 cartons * 400 pcs = 1023200 pcs

Read more less

The STLINK-V3MINIE is a stand-alone debugging and programming tiny probe for STM32 microcontrollers, portable and easy-to-use. Onboard JTAG/SWD interfaces for communicating with STM32 microcontroller, also provides a virtual COM port for the host PC to communicate with the target microcontroller through one UART. Features: 1. Tiny 15 mm x 42 mm stand-alone debugging and programming probe for STM32 microcontrollers 2. Self-powered through a USB Type-C connector 3. USB 2.0 high-speed interface 4. Probe firmware is updatable through USB 5. Support drag-and-drop Flash programming of binary files 6. Two color LEDs: communication, power 7. JTAG communication support up to 21 MHz 8. SWD (Serial Wire Debug) and SWV (Serial Wire Viewer) communication support up to 24 MHz 9. Virtual COM port (VCP) up to 15 Mbps 10. 1.65 to 3.60 V application voltage supportSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

Features1. 5.5-inch IPS display with a hardware resolution of 1440 ?? 2560 2. 10-point capacitive touch control with toughened glass panel, hardness up to 6H 3. Adopt the optical bonding touch technique for better use 4. Support Raspberry Pi OS / Ubuntu / Kali and Retropie when working with Raspberry Pi 4B 5. Support Windows 11/10/8.1/8/7 when working as a computer monitor 6. Support HDMI audio output with 3.5mm Jack and 4PIN headerDevice & System Support1. For the moment, only the Raspberry Pi 4B and CM4 have adequate CPU performance to drive this 2K display completely. 2. Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B. 3. Limited by the hardware, when working with Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only supports default portrait display and cannot be rotated. 4. The case only supports Raspberry Pi 4B.Package List1. 5.5 inch 1440x2560 LCD x1 2. HDMI cable x1 3. USB type A plug to micro B plug cable x1 4. USB adapter (B) x1 5. HDMI adapter (B) x1 6. HDMI to Micro HDMI adapter (C) x1 7. USB adapter (D) x1 8. Screws pack x1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 18cm * 10cm * 4cm / 7.09inch * 3.94inch * 1.57inch Qty per Carton 80 Carton Weight 24.00kgs / 52.91lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 80 pcs = 26400 pcs 40HQ: 766 cartons * 80 pcs = 61280 pcs

Read more less

This is a MIPI_CSI camera with 5MP and 70 degree FOV. The onboard optical image stabilization camera module supports dual-axis image stabilization+/-5 degree compensation angle. Suitable for motion cameras, robots, wearables, and so on. Support Raspberry Pi, and Sunrise X3 Pi. Specifications: 1.Sensor :OV5647 2. CMOS Size: 1/4 inch 3. Pixel: 5MP 4. Aperture: F 2.8 5. Focal Length: 3.2mm 6. Angle of View: 70 degrees 7. Stabilization Type: OIS (Optical Image Stabilization) Stabilization 8. Focusing: Fixed focus 9. Distortion: Less than 1.0% 10. Range: XY axis +/- 5 derees 11. Image: 2592 x 1944 still image resolution 12. Video recording: 1920 x 1080p 30fps, 1280 x 720p 60fps, 640 ?? 480p 60fps, 640 x 480p 90fpsSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 4cm * 1cm / 3.15inch * 1.57inch * 0.39inch Qty per Carton 600 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 22cm * 32cm / 16.54inch * 8.66inch * 12.6inch Loading Container 20GP: 901 cartons * 600 pcs = 540600 pcs 40HQ: 2093 cartons * 600 pcs = 1255800 pcs

Read more less

Features1. Allows controlling up to 253 SC, ST series serial bus servos at the same time (adequate power supply required) 2. Wide range voltage input 6-12V (the input voltage and the servo voltage must be matched) 3. Built-in WiFi and Bluetooth, as well as ESP-NOW support, for remote control and servo debugging 4. Automatic download circuit for easy uploading programs 5. Open source web application and various robot structures 6. Compact size and space saving, suitable for integration into sorts of space-limited projectsSpecifications1. Power supply voltage: DC 6-12V 2. Power Connector: 5.5 x 2.1mm DC 3. Download interface: Type-C 4. Controller: ESP32 5. Control interface: UART 6. Dimensions: 30 x 65mm 7. Mounting hole size: 2.75mm 8. Mounting hole spacing: 23 x 58mmPackage List1. Servo Driver with ESP32 x 1 2. Screws pack x 1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 400 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 35cm * 35cm / 20.47inch * 13.78inch * 13.78inch Loading Container 20GP: 418 cartons * 400 pcs = 167200 pcs 40HQ: 971 cartons * 400 pcs = 388400 pcs

Read more less

1. Suitable for Raspberry Pi M12 camera module2. Resolution: 12 million pixels3. Focal length: 2.7mm4. Aperture (F/NO): 2.85. Back focal length: 4.97mm6. Distortion: less than -1.5%7. Working temperature: -30-70 degrees Celsius8. Mount: M12 x P0.59. Construction: 5G2P+IR10. Weight: 6 gramsNote: To use with Raspberry Pi Zero or Zero 2W, you need to buy an additional Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 30cm * 30cm * 50cm / 11.81inch * 11.81inch * 19.69inch Loading Container 20GP: 592 cartons * 500 pcs = 296000 pcs 40HQ: 1375 cartons * 500 pcs = 687500 pcs

Read more less

1. Barcode scanning module (B) is a barcode / 2D code scanning module, which can quickly and accurately decode 1D or 2D codes on paper or screen through intelligent image recognition algorithm.2. Support multiple barcode formats and 4mil high density barcode scanning. 3. On-board USB and UART interface, which can be directly plugged into a computer or easily integrated into various embedded devices.4. Resolution: 640 x 4805. Scanning angle: pitch +/-65 degrees, skew +/-65 degrees, roll 360 degrees6. Scanning mode: sensing, continuous, manual (default)7. Precision: greater than or equal to 4 million8. Communication interface: USB keyboard mode (default), USB virtual port, UART port9. Light source: white (Lighting) + red (Aiming), both visible light10. Power supply: 5V/3.3V11. Current: 262mA at work, 75mA at standby, 108mA at boot12. Temperature: working temperature -20-60 degrees Celsius, storage -30-70 degrees CelsiusPacking list:Bar code scanning module (B) x1USB A-type plug to micro B plug cable x1PH2.0 4Pin data cable x1Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

Read more less

1. For Raspberry Pi M12 camera module2. Resolution: 5 megapixels3. Focal length: 25mm4. Aperture (F/NO): 1.75. Back focal length: 5.20mm6. Distortion: less than 0.3%7. Operating temperature: -20-80 degrees Celsius8. Mount: M12 x P0.59. Construction: 6G + IR10. Weight: 9gNote: To use with Raspberry Pi Zero or Zero 2W, you need to buy an additional Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 30cm * 30cm * 50cm / 11.81inch * 11.81inch * 19.69inch Loading Container 20GP: 592 cartons * 500 pcs = 296000 pcs 40HQ: 1375 cartons * 500 pcs = 687500 pcs

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1Specification: Package Weight One Package Weight 0.71kgs / 1.57lb One Package Size 22cm * 18cm * 6cm / 8.66inch * 7.09inch * 2.36inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs 40HQ: 412 cartons * 42 pcs = 17304 pcs

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1Specification: Package Weight One Package Weight 0.71kgs / 1.57lb One Package Size 22cm * 18cm * 6cm / 8.66inch * 7.09inch * 2.36inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs 40HQ: 412 cartons * 42 pcs = 17304 pcs

Read more less

1. Suitable for Raspberry Pi Pico and other devices to achieve reliable remote communication2. Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards.3. Features CAN function, adopts SPL interface CAN controller MCP2515 with transceiver SIT65HVD230DR4. Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPvthon examples)l5. Operating voltage: 3.3V-5V6. CAN controller: RMCP25157. CAN transceiver: SIT65HVD230DR8. Communication bus: SPI9. Baudrate: 5K-1000Kbps10. Size: 52 x 21mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs 40HQ: 1031 cartons * 500 pcs = 515500 pcs

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1Specification: Package Weight One Package Weight 1.95kgs / 4.31lb One Package Size 35cm * 15cm * 20cm / 13.78inch * 5.91inch * 7.87inch Qty per Carton 14 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 14 pcs = 2478 pcs 40HQ: 412 cartons * 14 pcs = 5768 pcs

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1Specification: Package Weight One Package Weight 0.71kgs / 1.57lb One Package Size 22cm * 18cm * 6cm / 8.66inch * 7.09inch * 2.36inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs 40HQ: 412 cartons * 42 pcs = 17304 pcs

Read more less

1. 3.5-inch IPS display, hardware resolution 480 x 8002. 5-point capacitive touch, 170 degrees wide viewing angle, excellent display performance3. Optical lamination touch technology, better use4. Support Raspberry Pi OS/Ubuntu/Kali/WIN10 loT/Retropie, driver-free5. Interface: HD-MI interface, USB Type-C interface6. Size: 88.87 x 52.56mm7. Weight: 0.159 kgPacking list:3.5" 480x800 LCD display x 1HDMI flat cable ~1m x1USB Type-A to USB Type-C cable ~1m x1HD-MI to Micro HD-MI adapter x1Specification: Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 172 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 172 pcs = 30444 pcs 40HQ: 412 cartons * 172 pcs = 70864 pcs

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1Specification: Package Weight One Package Weight 1.95kgs / 4.31lb One Package Size 35cm * 15cm * 20cm / 13.78inch * 5.91inch * 7.87inch Qty per Carton 14 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 14 pcs = 2478 pcs 40HQ: 412 cartons * 14 pcs = 5768 pcs

Read more less

Features:1. Based on the ESP32-WROOM-32 module, it supports WIFI, Bluetooth, ESP-NOW and other wireless communications2. Onboard motor control interface for 2x DC motors with encoder or 4x DC motors without encoder (2 groups)3. Onboard serial bus steering gear control interface, which can control up to 253 ST3215 serial bus steering gears and obtain steering gear feedback4. Onboard 9-axis IMU, obtain attitude and heading information at any time5. Support 7-13V power input, can be directly powered by 2S or 3S lithium battery module6. Automatic download circuit, easy to upload program7. Support input voltage/current monitoring8. Onboard TF card slot9. Onboard lidar interface and integrated UART to USB function10. I2C interface for connecting peripherals such as OLED, IMU and other I2C devices11. Adapt multi-function expansion connectors for additional functions, such as controlling servos or relays12. Onboard 40PIN GPIO header, used to connect to the host (Raspberry Pi/Jetson Nano, etc.) and supply power to it, communicate through serial port or I2C13. Provide open source demos and detailed tutorials for novices, easy to get startedProduct parameters:1. Control module: ESP32-WROOM-322. Control chip: ESP323. Power supply: DC 7-13V4. Power interface: XH2.545. Antenna connector: IPEX16. Interface: Type-C7. Wireless communication: WIFI, Bluetooth, ESP-NOW8. Mounting hole spacing: 49 x 58mm9. Installation hole diameter: 3mm10. Dimensions: 65 x 65mm11. Weight: 49 gramsPacking list:-Robot Universal Drive x 1-Screw Pack x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 336 Carton Weight 30.00kgs / 66.14lb Carton Size 55cm * 55cm * 20cm / 21.65inch * 21.65inch * 7.87inch Loading Container 20GP: 440 cartons * 336 pcs = 147840 pcs 40HQ: 1023 cartons * 336 pcs = 343728 pcs

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1Specification: Package Weight One Package Weight 1.95kgs / 4.31lb One Package Size 35cm * 15cm * 20cm / 13.78inch * 5.91inch * 7.87inch Qty per Carton 14 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 14 pcs = 2478 pcs 40HQ: 412 cartons * 14 pcs = 5768 pcs

Read more less

1. Optical magnification: 0.12X ~ 1.8X2. Zoom ratio: 15:013. Image format: 1/2" MOUNT C/CS (C-CS adapter included)4. Operating distance: 55 ~ 285 mm5. Object distance: 2.4 ~ 36 mm6. Dimensions: 39×112mm7. Lens structure: aluminum alloy + 5 elements in 4 groups8. 100X magnification lens, details and tiny things are clearly visible9. The Raspberry Pi development board and Raspberry Pi HQ camera in the photo are not includedFor use with Raspberry Pi Zero or Zero 2W, additional purchase of a Raspberry Pi Zero v1.3 Camera Cable is required10. The picture is for reference only. Due to the structural limitation of the microscope lens, additional lighting is required during useSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 15cm * 8cm * 8cm / 5.91inch * 3.15inch * 3.15inch Qty per Carton 140 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 140 pcs = 24780 pcs 40HQ: 412 cartons * 140 pcs = 57680 pcs

Read more less

1. Resolution: 1.58 MP (color), 1456 × 10882. CMOS diagonal size: 6.3mm3. Pixel size: 3.45μm × 3.45μm4. Output: RAW105. Adjustable back focus (12.5~22.4mm)6. The lens supports C-mount / CS-mount (including C-CS adapter)7. IR CUT FILTER integration8. Tripod: 1/4″-209. Weight: 41 grams10. Data cable length: 150 mm11. Based on IMX296 sensor with a resolution of 1.6MP12. Capable of capturing fast moving objects without rolling shutter jelly effect, ideal for fast motion photography and machine vision applications13. With a large pixel size of 3.45μm × 3.45μm providing high light sensitivity, the global shutter camera can operate at short exposure times (as low as 30μs with sufficient light)14. The global shutter camera includes a C to CS mount adapter for industrial lenses with C or CS mount15. Compatible with all Raspberry Pi series boards (Extra adapter required for Raspberry Pi Zero or Compute Module series)16. Global shutter, clearer imaging17. The global shutter eliminates the jelly effect when shooting fast-moving objects, which is more suitable for high-speed motion capturePacking list:Global shutter camera x 1C-CS adapter x 1Dust cap x 1screwdriver x 1FFC ribbon x 1box x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 13cm * 13cm * 4cm / 5.12inch * 5.12inch * 1.57inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs 40HQ: 412 cartons * 468 pcs = 192816 pcs

Read more less

1. SIM8262A-M2 SIMCom 5G module Sub-6G module based on Qualcomm Snapdragon X62 adopts 3GPP 5G Release 162. SIM8262A-M2 is a multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module, supports R16 5G NSA/SA, up to 2.4Gbps data transmission.3. It has powerful expansion capabilities and rich interfaces, including PCle, USB3.1, GPIO, etc. This module provides great flexibility and ease of integration for customers applications4. SIM8262A-M2 adopts M.2 shape, AT command is compatible with SIM7912G/SIM8200X-M2 series modules. This also minimizes customer investment and shortens time to market5. It is designed for applications requiring high-throughput data communication under various radio propagation conditions. Due to the unique combination of performance, safety and flexibility, this module is well suited for many applications6. Standard M.2 interface7. High throughput data communication8. The AT command of SIM8262A-M2 is compatible with SIM7912G/SIM8200X-M2 series modulesSpecification:1. 5G standard: 3GPP R162. Chip: Qualcomm Snapdragon X623. Sub-6G: n1, n2, n5, n7, n12, n13, n14, n18, n20, n25, n30, n41, n48, n66, n71, n77, n78, n794. LTE-FDD: B1, B2, B4, B5, B7, B12, B13, B14, B17, B18, B19, B25, B26, B29, B30, B66, B715. LTE-TDD: В38, B41, B42, B43, B46, B486. WCDMA: B1, B2, B4, B5, B87. GNSS: GPS, GLONASS, Beidou, Galileo and QZSS8. Operating temperature: -30 to 70 degrees Celsius9. SIM card: 1.8v/2.95v10. Antenna: for 3G / 4G / 5G / GNSS; 4 x IPEX-4 connectors11. Power supply: 3.135-4.4v12. Interface: M.213. Applicable areas: CPE, intelligent gateway, drone, live broadcast, telemedicine, intelligent security, etc.14. Dimensions: 42 x 30 x 2.3mmData rate:1. Sub-6G: 2.4 Gbps (DL) / 500Mbps (UL)2. LTE1: Gbps (DL) / 200Mbps (UL)3. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)Software features:1. Operating system: Windows / Linux / Android2. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.03. Dialing: RNDIS, NDIS, PPP, MBIM4. SMS support: MT, MO, CB, Text, PDU5. Firmware upgrade: support firmware upgrade via USB portSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 4cm * 4cm / 3.15inch * 1.57inch * 1.57inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 56cm * 28cm * 28cm / 22.05inch * 11.02inch * 11.02inch Loading Container 20GP: 607 cartons * 356 pcs = 216092 pcs 40HQ: 1410 cartons * 356 pcs = 501960 pcs

Read more less

1. Official Raspberry Pi hardware debugging toolkit designed for Pico2. Built with RP2040 microcontroller chip designed by for Raspberry Pi3. Integrated design, with solder-free, plug-and-play features, can be connected to the debugging interface of the target board through the SWD interface4. RP2040 microcontroller chip designed by British for Raspberry Pi5. Onboard Micro-USB interface, used to connect to PC or other motherboards6. Onboard 3PIN SWD interface, used to connect the target board7. Onboard 3PIN USB to UART bridge standard CMSIS-DAP interface, compatible with most arm microcontrollers8. Using OpenOCD and other tools that support CMSIS-DAP9. Follow the Raspberry Pi 3PIN debug connector specification10. Comes with transparent plastic case and connecting cable11. Open source program, more convenient for firmware upgrade12. Size: 22x32mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. 13.3 inches 2K AMOLED touch display2. 178-degree wide viewing angle, excellent display performance3. 2560×1440 high resolution, clearer picture and more details4. With 100% SRGB, 100% DCI-P3 color gamut coverage, making the colors more vivid and delicate5. AMOLED active light-emitting screen, with 3.68 million active light-emitting pixels, with precise light control ability, presenting more vivid colors and images6. The 100,000-level contrast radio has a shocking 100,000-level contrast ratio and a hundred times the performance of light and shade, showing the layers and details of the deep starry sky in front of your eyes7. Unlike ordinary LCD, AMOLED uses active emission technology, each pixel on AMOLED will emit light by itself, resulting in brighter highlights or true black shadows, making it almost close to 0nit pure black8. Capacitive 10-point touch9. Support DDC/CI brightness adjustment10. Full-featured Type-C interface, integrated audio and video transmission, plug and play11. Computer dual-screen collaborative processing12. Dual-track ferrite hi-fi speakers, louder volume, wider range and better sound quality13. Product size: 30.7 x 18.3 x 1 cmPacking list:-Display × 1-HDMI flat cable (1m) x 1-USB-A to USB-C cable (1m) x 1-USB-C to USB-C cable × 1-HDMI to Micro HDMI cable (1m) x 1-5V 3A power adapter × 1-Tripod x 1Specification: Package Weight One Package Weight 1.73kgs / 3.82lb One Package Size 47cm * 28cm * 19cm / 18.5inch * 11.02inch * 7.48inch Qty per Carton 2 Carton Weight 4.56kgs / 10.05lb Carton Size 49cm * 30cm * 40cm / 19.29inch * 11.81inch * 15.75inch Loading Container 20GP: 453 cartons * 2 pcs = 906 pcs 40HQ: 1052 cartons * 2 pcs = 2104 pcs

Read more less

1. Ranging distance: 0.03-2M, 2-8M, greater than 8M2. Average error: 15mm, 20mm, 30mm3. Overall standard deviation: 5mm, 15mm, 25mm4. Ranging distance: 0.03~25.00m (target surface reflectivity is 80.6%)5. Scanning frequency: 10Hz6. Scanning angle: 360°7. Ranging frequency: 21600Hz8. Angular resolution: 0.167°9. Wavelength: 895-915 nm (Typ 905)10. Communication interface: UART@92160011. Ambient light intensity: 60 KLux12. Power supply: 4.5-5V (typically 5V)13. Power consumption: 1.45W14. Working current: 290mA15. Working temperature: minus 10-50 degrees Celsius16. Service life: 10000H17. Dimensions: 34.8 x 54 x 46.29mm18. Product weight: 46.1 gramsPacking list:-DTOF lidar STL27L x 1-LiDAR driver x 1 with ESP8266 adapter-1m USB Type-A to Type-C cable x 1-11cm PH2.0 to 1.27H cable x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 13cm * 12cm * 8cm / 5.12inch * 4.72inch * 3.15inch Qty per Carton 20 Carton Weight 5.22kgs / 11.51lb Carton Size 33cm * 28cm * 32cm / 12.99inch * 11.02inch * 12.6inch Loading Container 20GP: 901 cartons * 20 pcs = 18020 pcs 40HQ: 2093 cartons * 20 pcs = 41860 pcs

Read more less

1. 13.3 inches 2K AMOLED touch display2. 178-degree wide viewing angle, excellent display performance3. 2560×1440 high resolution, clearer picture and more details4. With 100% SRGB, 100% DCI-P3 color gamut coverage, making the colors more vivid and delicate5. AMOLED active light-emitting screen, with 3.68 million active light-emitting pixels, with precise light control ability, presenting more vivid colors and images6. The 100,000-level contrast radio has a shocking 100,000-level contrast ratio and a hundred times the performance of light and shade, showing the layers and details of the deep starry sky in front of your eyes7. Unlike ordinary LCD, AMOLED uses active emission technology, each pixel on AMOLED will emit light by itself, resulting in brighter highlights or true black shadows, making it almost close to 0nit pure black8. Capacitive 10-point touch9. Support DDC/CI brightness adjustment10. Full-featured Type-C interface, integrated audio and video transmission, plug and play11. Computer dual-screen collaborative processing12. Dual-track ferrite hi-fi speakers, louder volume, wider range and better sound quality13. Product size: 30.7 x 18.3 x 1 cmPacking list:-Display × 1-HDMI flat cable (1m) x 1-USB-A to USB-C cable (1m) x 1-USB-C to USB-C cable × 1-HDMI to Micro HDMI cable (1m) x 1-5V 3A power adapter × 1-Tripod x 1Specification: Package Weight One Package Weight 1.73kgs / 3.82lb One Package Size 47cm * 28cm * 19cm / 18.5inch * 11.02inch * 7.48inch Qty per Carton 2 Carton Weight 4.56kgs / 10.05lb Carton Size 49cm * 30cm * 40cm / 19.29inch * 11.81inch * 15.75inch Loading Container 20GP: 453 cartons * 2 pcs = 906 pcs 40HQ: 1052 cartons * 2 pcs = 2104 pcs

Read more less

1. 13.3 inches 2K AMOLED touch display2. 178-degree wide viewing angle, excellent display performance3. 2560×1440 high resolution, clearer picture and more details4. With 100% SRGB, 100% DCI-P3 color gamut coverage, making the colors more vivid and delicate5. AMOLED active light-emitting screen, with 3.68 million active light-emitting pixels, with precise light control ability, presenting more vivid colors and images6. The 100,000-level contrast radio has a shocking 100,000-level contrast ratio and a hundred times the performance of light and shade, showing the layers and details of the deep starry sky in front of your eyes7. Unlike ordinary LCD, AMOLED uses active emission technology, each pixel on AMOLED will emit light by itself, resulting in brighter highlights or true black shadows, making it almost close to 0nit pure black8. Capacitive 10-point touch9. Support DDC/CI brightness adjustment10. Full-featured Type-C interface, integrated audio and video transmission, plug and play11. Computer dual-screen collaborative processing12. Dual-track ferrite hi-fi speakers, louder volume, wider range and better sound quality13. Product size: 30.7 x 18.3 x 1 cmPacking list:-Display × 1-HDMI flat cable (1m) x 1-USB-A to USB-C cable (1m) x 1-USB-C to USB-C cable × 1-HDMI to Micro HDMI cable (1m) x 1-5V 3A power adapter × 1-Tripod x 1Specification: Package Weight One Package Weight 1.73kgs / 3.82lb One Package Size 47cm * 28cm * 19cm / 18.5inch * 11.02inch * 7.48inch Qty per Carton 2 Carton Weight 4.56kgs / 10.05lb Carton Size 49cm * 30cm * 40cm / 19.29inch * 11.81inch * 15.75inch Loading Container 20GP: 453 cartons * 2 pcs = 906 pcs 40HQ: 1052 cartons * 2 pcs = 2104 pcs

Read more less

1. Input DC1.8-15V voltage range, applicable current within 2A2. The product is equipped with a self-recovery fuse, which will automatically disconnect when the current is too large, and the fuse will automatically recover after cooling3. Dimensions: length and width 32x32x14 mm4. Net weight: 14 gramsSpecial reminder:- DC motor governor connected to DC power supply- Do not directly connect the household 220V AC, otherwise the damage will be at your own risk!- This is a 2A current governor, the continuous current is greater than 0.5A, the 775 motor, the motor of the childrens car cannot be driven, please dont buy it wrong- It is not recommended to supply power greater than 12V, such as 12V lead-acid batteries, which may cause damage to the governorSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 6cm * 6cm * 5cm / 2.36inch * 2.36inch * 1.97inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 47cm * 47cm * 39cm / 18.5inch * 18.5inch * 15.35inch Loading Container 20GP: 309 cartons * 500 pcs = 154500 pcs 40HQ: 718 cartons * 500 pcs = 359000 pcs

Read more less

1. Onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into products2. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom3. Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz4. 264KB of SRAM, and 16MB of onboard Flash memory5. Onboard DVI interface can drive most HDMI screens (DVI compatibility required)6. Supports using as a USB host or slave via onboard PIO-USB port7. Onboard TF card slot for reading and writing TF card8. Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios9. USB 1.1 with device and host support10. Drag-and-drop programming using mass storage over USB11. Low-power sleep and dormant modes12. 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels13. Accurate clock and timer on-chip14. Temperature sensor15. Accelerated floating-point libraries on-chip16. 8 × Programmable I/O (PIO) state machines for custom peripheral support17. Product size: 65 x 30mm18. Weight: 12 gramsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 2cm * 5cm / 3.94inch * 0.79inch * 1.97inch Qty per Carton 324 Carton Weight 7.58kgs / 16.71lb Carton Size 32cm * 38cm * 32cm / 12.6inch * 14.96inch * 12.6inch Loading Container 20GP: 685 cartons * 324 pcs = 221940 pcs 40HQ: 1590 cartons * 324 pcs = 515160 pcs

Read more less

1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom2. Onboard 3PIN SWD port for connecting the debugged target board3. Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers4. Works with OpenOCD and other tools supporting CMSIS-DAP5. Adopts the Raspberry Pi 3PIN Debug Connector Specification6. Onboard 3PIN USB to UART bridge7. Onboard 4PIN I2C port for the testing target board8. Onboard 1.14inch 240×135 pixels 65K color IPS LCD display9. Equipped with plastic case and cables10. Open-source firmware, more convenient to upgrade11. Product size: 61 x 15.86 x 9mm12. Weight: 15gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 180 Carton Weight 6.50kgs / 14.33lb Carton Size 32cm * 38cm * 32cm / 12.6inch * 14.96inch * 12.6inch Loading Container 20GP: 685 cartons * 180 pcs = 123300 pcs 40HQ: 1590 cartons * 180 pcs = 286200 pcs

Read more less

Features:1. This is an industrial-grade integrated 802.11b/g/n module that can realize two-way transparent transmission of TTL serial port, WiFi, and network port.2. It integrates multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, UART to HTTPD client, etc.3. Traditional serial port devices or MCU control devices can quickly access WiFi wireless networks through this WiFi module.4. Small size and easy to install.5. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applicationsProduct parameters:1. Power supply: DC 3.3V2. Power supply method: pin header3. Dimensions: 25 x 40 x 8mm4. Ethernet: 10/100M auto-negotiation (connected through pin header)5. WIFI: Complies with 802.11b/g/n6. Serial port: UART7. Frequency band: 2.412-2.484 GHz8. Wireless network: Station / AP / AP+Station mode9. Security mechanism: WPA-PSK / WPA2-PSK10. Encryption type: TKIP/AES11. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)12. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)13. Baud rate: 300-460800 bps14. Check digit: none, odd, even, mark, space15. Data bits: 5-9 bits16. Flow control: RTS/CTS17. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT18. Configuration: host, browser, serial AT command19. Communication method: TCP/IP direct communication, VCOM20. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU21. Operating temperature: -40 to 85 degrees Celsius22. Humidity range: 5% to 95%Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 12cm * 3cm * 2cm / 4.72inch * 1.18inch * 0.79inch Qty per Carton 480 Carton Weight 20.30kgs / 44.75lb Carton Size 38cm * 32cm * 34cm / 14.96inch * 12.6inch * 13.39inch Loading Container 20GP: 644 cartons * 480 pcs = 309120 pcs 40HQ: 1497 cartons * 480 pcs = 718560 pcs

Read more less