Electronics Module Manual

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs 40HQ: 1213 cartons * 4 pcs = 4852 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 6 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 6 pcs = 3132 pcs 40HQ: 1213 cartons * 6 pcs = 7278 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 5 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 5 pcs = 2610 pcs 40HQ: 1213 cartons * 5 pcs = 6065 pcs

Read more less

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 4.50kgs / 9.92lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs 40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 4.50kgs / 9.92lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs 40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

1. Communication distance (without interference or obstruction): 15KM MAX2. Channels: 13 physical channels; 16 communication channels3. Data transmission support for flight Controllers: Open-source flight controllers such as PIX, APM, etc.; Boying Paladin v2; Jiyi K3A Pro / K++; Weike Zhifei V7AG4. Video transmission support for ground stations: QGroundControl; MissionPlanner; Jiyi IFLY / Flight Control Manager; Boying Agriculture; Weike Zhifei V7Pro Ground Station5. 15KM wireless digital video transmission, dual-channel full HD video real-time display6. Lightweight handheld ground station equipped with a 5.5-inch high-definition high-brightness display, with a brightness of up to 1000 nits, still clearly displaying ground station information and high-definition video transmission images even in direct sunlight outdoors.7. Equipped with a qualcomm octa-core high-performance CPU, easily hard-decoding H.264/H.265, 1080P 60fps video streams, and capable of running various ground station software at high speed.8. Equipped with an R1M card recording high-definition camera interface, plug-and-play, real-time image reading, providing a wider and clearer field of view.Ground station1. Display device: 5.5-inch 1080P High-definition High-brightness LCD Touch Display2. System configuration: Android 9.0, 2G RAM, 16G Storage3. Dimensions: (Antenna folded) 189.09 x 137.95 x 69.72 (mm)4. Weight: 850g5. Battery capacity and type: 10200mAh, 7.4V 2S Lithium-ion battery6. Fast charging protocol: PD 20W7. Charging time: 5h (20W fast charging)8. Operating time: 13h9. Functional interfaces:- Charging: Type-C- Firmware upgrade: DATA (4PIN)- - Mobile network: SIM card slot- External storage: TF card slot- Tripod mount: 1/4 inch threaded hole- Video output: Standard HDMI- External RTK: DATA (4PIN)- External USB drive: USB-A10. Waterproof rating: IP53Package contents:- EyeLink-RC-S1 x 1- MK15 sky unit and omnidirectional antenna x 1- Range extender antenna x 1- USB upgrade data cable x 1- PWM and PIX flight controller data transmission cable x 1- R1M card recording HD camera x 1- PD Fast charging data cable with dual type-C ports x 1- Sky unit 8PIN connection cable x 1- 20W PD US standard fast charger x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 10cm / 8.66inch * 6.69inch * 3.94inch Qty per Carton 12 Carton Weight 12.50kgs / 27.56lb Carton Size 46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch Loading Container 20GP: 503 cartons * 12 pcs = 6036 pcs 40HQ: 1168 cartons * 12 pcs = 14016 pcs

Read more less

1. The CAN FD to RS232/RS485 converter is a DIN rail-mounted bidirectional CAN FD and RS232/RS485 conversion device. It features high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and serial devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design, supporting a wide voltage range of 9V to 36V, with an arbitration domain baud rate of 5Kbps to 1Mbps and a data domain baud rate of 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 85.6 (mm)6. Mounting method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicator lights: POWER, WORK, COM, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in two 120-ohm termination resistors. Setting any one DIP switch to ON connects one 120-ohm resistor in parallel; setting both to ON connects two 120-ohm resistors in parallel.13. Serial port specifications: supports one RS485 or RS232 connection14. Modbus gateway: CAN FD to modbus RTU (Master/Slave)15. Transmit messages: supports 64 transmit messages16. Receive messages: supports 64 receive messages17. Conversion modes: transparent conversion, transparent with ID conversion, standard conversion, modbus conversion, and custom frame header/trailer conversion18. CAN ID: supports standard frames and extended frames19. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)20. Conversion direction: supports bidirectional conversion, serial to CAN only, and CAN to serial only21. Firmware upgrade: supports firmware upgrade via PC software22. Parameter configuration: AT commands, PC software configuration23. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV24. Electrical fast transient/burst immunity: power supply circuit 2KV; RS485/RS232 circuit 1KV; CAN circuit 1KV25. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV; CAN circuit common mode 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs 40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs 40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. This product features a compact layout design, allowing space for the built-in cooling fan of the Raspberry Pi 5 official case when connecting a 2230 size M-key M.2 peripheral to the Raspberry Pi 5.2. Supports NVMe protocol M.2 interface hard drives, offering high-speed reading and writing for high work efficiency.3. PCI-E ×1 Gen2 or Gen3 mode.4. Only supports Raspberry Pi 5B and 2230 size M.2 hard drives.5. Onboard work indicator lights: PWR is always on when powered, ACT flashes during reading and writing, providing a clear indication of the working status.6. HAT+ design with onboard EEPROM chip.7. Extends the single-channel PCIe 2.0 interface of the Raspberry Pi 5 (speed approximately 500MB/s).8. Supports M.2 M-key devices, only supporting 2230 size M.2 hard drives.9. Provides 3A current to the connected M.2 hard drive.10. Complies with Raspberry Pi HAT+ specifications and can be automatically detected via firmware.11. Compact layout design allows installation between the Raspberry Pi USB ports and the built-in cooling fan and case cover, improving compatibility with the Raspberry Pi 5 official case.12. Onboard LED indicators for power and ACT status.13. Designed specifically for stacking with the built-in cooling fan of the Raspberry Pi 5 official case.14. Dimensions: 65x56.5mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 14.60kgs / 32.19lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs 40HQ: 1071 cartons * 192 pcs = 205632 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating concerns about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of wiring terminals, allowing for bottom or back wiring options, facilitating integration into various applications such as rail mounting or embedded systems.16. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs 40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. The CW dual-paddle automatic key is compact and easy to carry.2. Made of high-strength aluminum alloy, the key paddles have a very small gap between them, offering excellent durability and smoother operation.3. It can be used in various situations and is an essential tool for amateur radio enthusiasts and shortwave radio communication.4. Dimensions: 4.98 x 3.2 x 2 cm5. Package contents:- CW dual-paddle automatic key x 1- 3.5mm audio cable x 1- Adjustment tool x 1Specification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 8.40kgs / 18.52lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 54 pcs = 31914 pcs 40HQ: 1373 cartons * 54 pcs = 74142 pcs

Read more less

1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs 40HQ: 1040 cartons * 264 pcs = 274560 pcs

Read more less

1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs 40HQ: 1040 cartons * 264 pcs = 274560 pcs

Read more less

1. Stall torque: 19.5 kg.cm @ 7.4V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 4V ~ 7.4V6. Gear type: high-precision metal gears7. No-load speed: 0.192 sec / 60 degrees (52 RPM) @ 7.4V8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, load, speed, and12. Input voltage13. No-load current: 150mA14. Stall current: 2.5A15. Kt constant: 7.8 kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build robotic projects requiring multiple servos, such as quadruped robots, hexapod robots, and robotic arms (this product provides the open-source structural model of the robot dog shown in the image below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoding angle sensor. Compared to potentiometers, the angle range is extended to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servos lifespan.20. Acceleration start/stop function: allows setting speed and acceleration values ??for smoother motion.21. The casing uses a higher-strength engineering plastic shell and a dual-axis low-profile structure design, optimizing the spacing between the planes where the dual-axis servo horns are located, resulting in a more compact overall structure and a more aesthetically pleasing appearance.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs 40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs 40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

1. The CAN FD TO ETH is a DIN rail-mounted CAN FD to Ethernet device, featuring high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and Ethernet devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design for stable operation and supports a wide voltage range of 9V to 36V. The arbitration domain baud rate is 5Kbps to 1Mbps, and the data domain baud rate is 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 76.1 (mm)6. Installation method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicators: POWER, WORK, NET, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps;11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in 2 CAN bus 120-ohm termination resistors. The resistors are connected via DIP switches. Setting any one DIP switch to ON connects one 120-ohm resistor; setting both DIP switches to ON connects two 120-ohm resistors in parallel.13. Network port specifications: RJ45, 10/100Mbps, auto-negotiation for crossover/straight-through cables14. Network protocols: TCP server, TCP client, UDP server, and UDP client15. Modbus gateway: CAN FD to ModbusTCP (Master/Slave)16. Transmit messages: supports configuring up to 64 transmit messages17. Receive messages: supports configuring up to... 64 received messages18. Conversion modes: transparent conversion, Transparent conversion with ID, Standard conversion, Modbus conversion, and Custom frame header and footer conversion19. CAN ID: supports standard frames and extended frames20. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)21. Packet frame number and time: supports custom packet frame number and custom packet time22. Conversion direction: supports bidirectional conversion, Ethernet to CAN only, and CAN to Ethernet only23. Firmware upgrade: supports firmware upgrade via PC software24. Parameter configuration: AT commands, PC software configuration25. Other functions: supports heartbeat packets, registration packets, normal, loopback, and listen-only operating modes26. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV27. Electrical fast transient/burst: power supply circuit 2KV, Ethernet and CAN port circuits 1KV28. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV, CAN circuit common mode 2KV, Ethernet circuit 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs 40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development boards power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs 40HQ: 1439 cartons * 72 pcs = 103608 pcs

Read more less

LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs 40HQ: 958 cartons * 90 pcs = 86220 pcs

Read more less

1. 5G standard: 3GPP Release 162. Chipset solution: Qualcomm Snapdragon X623. LTE: 1.6Gbps (DL) / 200Mbps (UL)4. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)5. Size: about 10 x 7.9cmFeatures:1. Based on Qualcomm platform, supports 5G NSA and SA networking, with multi-mode and multi-band capabilities2. Integrated dual-frequency positioning across multiple satellite constellations: GPS, GLONASS, BeiDou, Galileo, and QZSS3. Onboard USB 3.1 interface, backward compatible with USB 2.0, enabling high-speed 5G connectivity when connected to Jetson Orin motherboards, computers, or Raspberry Pi4. Onboard M.2 B KEY standard interface with pin configuration switch5. Onboard 4x SMA-to-IPEX antenna conversion ports for simplified antenna installation6. Reserved UART solder pad interface for data transmission with select modules7. Onboard 1 Nano SIM card slot and 1 eSIM slot packaged as QFN-8 (5 x 6), supporting dual-SIM single-standby with AT command switching8. Onboard power switch, reset button, and LED indicator for module power control and status monitoring9. Onboard high-efficiency power circuit capable of delivering up to 3A currentPackage list:- Expansion board x 1- Module x 1- 5G antennas x 4- SMA dust caps x 5- 13cm IPEX1 to IPEX4 cables x 2- 5cm IPEX1 to IPEX4 cables x 2- Screw set x 1- GPS antenna x 1- Dual-ended USB cable x 1- Heat sink x 1- USB 3.0 adapter x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs 40HQ: 958 cartons * 60 pcs = 57480 pcs

Read more less

1. Supports functions including dial-up internet access, voice calls, SMS, TCP, UDP, MQTT, HTTP(S) and FTP(S) 2. Supports GPS, Beidou, GLONASS, GALILEO, QZSS and LBS base station positioning 3. On-board USB 3.1 interface, backward compatible with USB 2.0, which can be connected to Jetson Orin motherboard, computer or Raspberry Pi for high-speed 4G internet access 4. On-board M.2 B KEY standard interface and pin setting switch, compatible with optional SIM8260X-M2/SIM8262X-M2 / RM5XX / SIM7600 series modules 5. On-board 4-channel SMA to IPEX antenna conversion interfaces, enabling more convenient antenna installation 6. Reserved UART pad interface, which facilitates data transmission and other functions with certain modules via this interface 7. On-board audio interface and audio decoding chip, applicable for voice operations like making calls with SIMXXX series modules 8. On-board power switch, reset button and LED indicator, making it easy to control the modules on/off status and check its operating condition 9. On-board high-efficiency power circuit, capable of outputting up to 3A current Specifications: 1. Chip Solution: Qualcomm MDM9607 2. Module Dimensions: 42 x 31.4 x 3.8mm 3. Operating Frequency Bands: --LTE-FDD: B1,B2,B3,B4,B5,B7, B8,B12,B13,B18,B19, B20,B25,B26,B28, B66 --LTE-TDD: B34,B38,B39,B40, B41 --WCDMA: B1,B2,B4,B5,B6,B8, B19 4. Data Transmission Rate: LTE 150Mbps (DL, Downlink) / 50Mbps (UL, Uplink)Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 13.10kgs / 28.88lb Carton Size 30cm * 42cm * 38cm / 11.81inch * 16.54inch * 14.96inch Loading Container 20GP: 556 cartons * 48 pcs = 26688 pcs 40HQ: 1292 cartons * 48 pcs = 62016 pcs

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, providing stable connection and efficient transmission.11. Integrated PoE module makes the development boards power supply more flexible.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve networking and power supply.13. Uses an IPS full-laminated tempered glass panel with a 178-degree wide viewing angle, supports ten-point touch, and provides a clear picture and excellent visual experience.14. Dimensions: 55x68mmRaspberry Pi camera type B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focus1. Screen model: 10.1-DSI-TOUCH-A2. Resolution: 800 x 1280 (H x V)3. Communication interface: MIPI-DSI (2-lane)4. Brightness: 400cd/m25. Touch chip: GT92716. Dimensions: 147.0 × 239.0 (mm)7. Display size: 135.36 × 216.58 (mm)8. Pixel size: 0.1692 (H) × 0.1692 (V) (mm)9. Contrast ratio: 800:1Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- 10.1-inch display x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- RPi camera (B) x 1- FFC cable - 15-pin ribbon cable x 1- MIPI-DSI cable 12cm x 1- MX 1.25 2-pin to 2.54 3-pin connector cable x 1- FFC cable 22-pin 200mm (reverse direction) x 2- MX1.25 2-pin to MX1.25 4-pin cable approximately 150mm x 1- MX1.25 2-pin to SH1.0 2-pin connector cable approximately 80mm x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable approximately 1 meter x 1- Copper standoffs pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 16cm * 7cm / 9.06inch * 6.3inch * 2.76inch Qty per Carton 16 Carton Weight 9.10kgs / 20.06lb Carton Size 48cm * 34cm * 30cm / 18.9inch * 13.39inch * 11.81inch Loading Container 20GP: 544 cartons * 16 pcs = 8704 pcs 40HQ: 1264 cartons * 16 pcs = 20224 pcs

Read more less

LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 28.00kgs / 61.73lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs 40HQ: 958 cartons * 90 pcs = 86220 pcs

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs 40HQ: 1439 cartons * 72 pcs = 103608 pcs

Read more less

1. Utilizing the original FT232RNL chip, it offers better stability and compatibility, enabling seamless industrial-grade high-performance communication between computers and TTL devices2. Three data indicator lights, allowing easy observation of the working status, facilitating programming and debugging for you3. Host interface: USB4. Communication rate: 300bps - 3Mbps5. Device interface: UART6. USB interface: Interface type: USB-A type interface; Interface protection: self-recovery fuse, ESD static protection7. UART interface: Interface form: terminal block; Interface form: 8PIN anti-blocking interface; Interface protection: IO protection diode circuit8. Indicator lights: PWR: power indicator light, turns on when connected to USB and detects voltage; TXD: transmit indicator light, turns on when data is sent from the USB port; RXD: receive indicator light, turns on when data is sent back from the device interface9. Note: this product does not come with a USB cable. This module is a USB-to-TTL level converter. Do not directly connect to RS232 level to avoid damaging the moduleSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 305 Carton Weight 26.00kgs / 57.32lb Carton Size 42cm * 37cm * 35cm / 16.54inch * 14.57inch * 13.78inch Loading Container 20GP: 490 cartons * 305 pcs = 149450 pcs 40HQ: 1138 cartons * 305 pcs = 347090 pcs

Read more less

1. Integrates STMicroelectronics six-axis inertial measurement unit (IMU) LSM6DSV and QSTs three-axis magnetometer QMC6309, supporting SPI and I2C communication protocols2. Carefully review the SPI and I2C wiring diagrams before use, as these wiring configurations correspond to different firmware versions3. Designed specifically for SlimeVR trackers and Smol Slime trackers, but also compatible with any device matching its form factor4. Suitable for most SlimeVR designs utilizing BMI/LSM IMUs5. Parts list: X-shaped PCBA x 1, 2.54mm x 7-pin header plugs x 2Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 10cm * 2cm / 4.72inch * 3.94inch * 0.79inch Qty per Carton 210 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 210 pcs = 91980 pcs 40HQ: 1018 cartons * 210 pcs = 213780 pcs

Read more less

1. Yahboom USB industrial AI vision camera features 5 million pixels, 2592x1944 ultra-high-definition 2K resolution, and a 105-degree wide-angle field of view. It captures distortion-free images at 30fps (MJPG format), making it ideal for real-time AI target detection and autonomous driving. The camera includes a high-speed driver-free USB 2.0 interface, supports standard UVC communication protocol and OTG extension, and comes with an integrated USB cable for plug-and-play operation. It delivers high-resolution imaging for advanced edge AI and robotics applications.2. Equipped with a 1/2.8-inch 5-megapixel sensor, it provides true 2592x1944 resolution and a 105-degree field of view. The custom optical lens eliminates distortion common in wide-angle cameras, supporting standard geometric image output for precise AI inference without software correction.3. It supports stable 30fps image output at maximum resolution in MJPG format, with multiple resolution/frame rate options. This high-throughput imaging ensures smooth video transmission for demanding visual tasks like object tracking, gesture recognition, and autonomous navigation, particularly when used with powerful edge devices like Jetson AGX Orin.4. Native UVC protocol support enables true plug-and-play on Linux (Raspberry Pi OS, Ubuntu), Windows, and Android platforms. No driver installation is required, allowing seamless integration with Jetson, RDK, and PC systems to reduce development costs.5. The fully enclosed aluminum alloy housing provides IP-level dust protection, passive heat dissipation, and mechanical shielding. Dual 1/4-inch mounting threads on the top and bottom allow flexible attachment to robots, tripods, or custom brackets, ensuring stability for field deployment. Parameters:1. Product board model: BL-500W-3352. Image sensor: 1/2.8 inch3. Pixel size: 2.0 micrometers x 2.0 micrometers4. Signal-to-noise ratio: 40 dB5. Low illumination: 0.001 Lux6. Dynamic range: 70 dB 7. Exposure time: 35 milliseconds8. Output format: MJPG/YUY29. Supported protocols: Standard UVC communication protocol, supports OTG conversion 10. Focusing method: Fixed focus11. Maximum effective pixels: 2592 x 1944 12. Output image format: MJPG, YUV (YUY2)13. Auto exposure control: Supported14. Auto white balance: Supported15. Adjustable parameters: Brightness, contrast, hue, saturation, sharpness, gamma, white balance, backlight contrast, gain, exposure, scrolling, low-light compensation16. Lens parameters: Focal length: 2.8 millimeters, D: 105 degrees, H: 81.8 degrees, V: 66 degrees 17. Interface type: USB 2.018. Power supply: 5V19. Working current: Less than or equal to 160 milliamperes20. Operating temperature: Minus 10 to 70 degrees Celsius 21. Storage temperature: Minus 20 to 85 degrees Celsius22. Cable length: 90 centimetersSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 21cm * 8cm * 8cm / 8.27inch * 3.15inch * 3.15inch Qty per Carton 32 Carton Weight 12.30kgs / 27.12lb Carton Size 44cm * 34cm * 34cm / 17.32inch * 13.39inch * 13.39inch Loading Container 20GP: 524 cartons * 32 pcs = 16768 pcs 40HQ: 1217 cartons * 32 pcs = 38944 pcs

Read more less

1. The Yahboom USB Multi-Function Serial Module is a powerful, high-performance serial communication tool designed to simplify and accelerate embedded development and industrial debugging. It integrates three essential conversion modes onto a compact circuit board: USB-to-TTL, USB-to-RS485, and TTL-to-RS485, eliminating the need for multiple adapters. The module supports 1.8V/3.3V/5V TTL level switching, RS485 hardware automatic direction switching circuitry, and supports high-speed transmission up to 6 Mbps (TTL) and 12 Mbps (RS485), ensuring broad compatibility, reliable data transmission, and a simplified workflow for applications involving STM32, ESP32, Raspberry Pi, Jetson, RDK, and industrial PLCs.2. Tri-function Module: A single module replaces three separate adapters, supporting USB-to-TTL (for programming and debugging), USB-to-RS485 (for PC-to-industrial equipment communication), and TTL-to-RS485 (for microcontroller-to-industrial network connection). An onboard DIP switch enables quick, tool-free mode selection, saving time and reducing hardware redundancy.3. Wide Voltage Compatibility & RS485 Auto-Direction: Features a selectable TTL voltage switch (1.8V/3.3V/5V) for safe connection to low-power chips, common MCUs, and Single Board Computers (SBCs) like Raspberry Pi and Jetson. Its built-in hardware circuitry automatically handles RS485 transmit/receive direction switching, eliminating complex software timing control and preventing data loss in communication with industrial sensors, PLCs, or robotic bases.4. High-Speed & Reliable Data Transmission: Supports TTL baud rates up to 6 Mbps and RS485 baud rates up to 12 Mbps with stable and reliable performance. Built-in professional TTL hardware flow control (RTS/CTS) prevents buffer overflow during high-speed data exchange. Onboard TVS and ESD protection, along with clear TX/RX/power indicators, ensure stable operation in electrically noisy environments.5. Plug-and-Play: Designed for convenience, featuring a reversible USB Type-C connector, an external 5V output (up to 300mA) capable of powering connected devices, and included Dupont wires for quick user connections. Comprehensive tutorials and documentation are also provided to help users get started quickly with various microcontrollers and industrial equipment. Parameters:1. Main Chips: CH343P, SP3485EN-MS2. Interface Type: USB Type-C (supports reversible insertion)3. Communication Protocol: TTL (UART) / RS4854. Supported Levels: 1.8V / 3.3V / 5V (capable of external power output, max 300mA)5. Operating Modes: USB-TTL / USB-RS485 / TTL-RS4856. Baud Rate Range: USB-TTL: 50 bps ~ 6 Mbps / USB-RS485: 6 Mbps / TTL-RS485: 12 Mbps7. RS485 Transmission Distance: Depends on the interference resistance capability of the transmission cable, the size of the transmission bytes, and the baud rate. The baud rate and transmission byte size are inversely proportional to the transmission distance.8. Flow Control Support: RTS (Output Control), CTS (Input Control)9. Operating Systems: Windows, Linux, macOS, Android10. Protection Mechanisms: Input reverse connection protection; ESD protection on RS485-A/B pins11. Dimensions: 64.47 millimeters x 20 millimeters x 8.73 millimeters12. Weight: 5.9 gramsSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 72 Carton Weight 8.30kgs / 18.30lb Carton Size 44cm * 34cm * 32cm / 17.32inch * 13.39inch * 12.6inch Loading Container 20GP: 557 cartons * 72 pcs = 40104 pcs 40HQ: 1293 cartons * 72 pcs = 93096 pcs

Read more less

1. D-Robotics RDK GS130W is a high-performance binocular stereo global shutter camera module designed for precise dynamic vision applications. It features dual SC132GS global shutter sensors supporting synchronized binocular exposure and external triggering, delivering up to 120 fps at 1280×1080 resolution. With an 80mm baseline, high dynamic range (HDR), 40dB signal-to-noise ratio, and near-infrared enhancement, the GS130W is ideal for robotic vision, real-time motion tracking, and machine inspection. Fully compatible with RDK X5 and S100(P) development boards, its rugged semi-enclosed metal housing and reliable MIPI connectivity enable easy commercial deployment and scalable vision solutions.2. Global Shutter for Motion-Stable Imaging: Equipped with dual SC132GS global shutter sensors supporting synchronized exposure and external triggering, it eliminates motion blur to ensure precise image capture in dynamic scenes—perfect for robotics and real-time monitoring.3. High-Speed & High-Resolution Vision: Provides 1280×1080 resolution video at 120 fps with high dynamic range (HDR) and 40dB signal-to-noise ratio, delivering clear, detailed, low-noise video for accurate depth perception and machine vision tasks.4. Optimized for RDK Ecosystem: Directly compatible with RDK X5 and RDK S100(P) development boards via MIPI interface (requires pairing with the RDK S100(P) camera expansion board). Includes stereo depth algorithm resources and sample code to accelerate integration and development of ROS-based applications.5. Rugged & Reliable Design: The semi-enclosed metal housing enhances durability, improves heat dissipation, and minimizes deformation to ensure stable and reliable performance in commercial and industrial environments. Parameters:1. Signal-to-Noise Ratio: 40 dB 2. Image Sensor Model: 2 × SC132GS, 1/4-inch CMOS, global shutter 3. Maximum Frame Rate: 1280×1080 at 120 FPS 4. Resolution: 1280 × 1080 5. Output Format: MIPI CSI-2, 8/10/12-bit RAW 6. Pixel Size: 2.7 micrometers × 2.7 micrometers 7. Pixels: 1.3 megapixels 8. Baseline Distance: 80 millimeters 9. Synchronization: Supports external triggering and multi-sensor synchronization 10. Lens Focal Length: 1.75 millimeters 11. Operating Temperature Range: Minus 20 to 60 degrees Celsius 12. Aperture: F2.0 13. Module Dimensions: 144.4 × 32.4 × 28 millimeters 14. Field of View: Diagonal 157.2 degrees, Horizontal 96.8 degrees, Vertical 115.6 plus or minus 3 degrees 15. Weight: 96.6 gramsSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 18cm * 6cm * 6cm / 7.09inch * 2.36inch * 2.36inch Qty per Carton 80 Carton Weight 11.50kgs / 25.35lb Carton Size 38cm * 32cm * 50cm / 14.96inch * 12.6inch * 19.69inch Loading Container 20GP: 438 cartons * 80 pcs = 35040 pcs 40HQ: 1018 cartons * 80 pcs = 81440 pcs

Read more less

1. Aluminum alloy construction for durability and strength2. Equipped with heat dissipation fins and fans, providing excellent heat dissipation performance3. Features camera mount compatible with IMX219 camera module4. Simple installation recommended under professional guidance or at service center5. Size: about 9.05 x 6.2 x 3.135 cmPackage contents:- VisionFive2 Lite case (top and bottom covers) x 1- 3007 5V cooling fan x 1- Heat sinks x 3- Screw set x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 54 Carton Weight 8.00kgs / 17.64lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 54 pcs = 26892 pcs 40HQ: 1157 cartons * 54 pcs = 62478 pcs

Read more less

1. The Yahboom USB Multi-Function Serial Module is a powerful, high-performance serial communication tool designed to simplify and accelerate embedded development and industrial debugging. It integrates three essential conversion modes onto a compact circuit board: USB-to-TTL, USB-to-RS485, and TTL-to-RS485, eliminating the need for multiple adapters. The module supports 1.8V/3.3V/5V TTL level switching, RS485 hardware automatic direction switching circuitry, and supports high-speed transmission up to 6 Mbps (TTL) and 12 Mbps (RS485), ensuring broad compatibility, reliable data transmission, and a simplified workflow for applications involving STM32, ESP32, Raspberry Pi, Jetson, RDK, and industrial PLCs.2. Tri-function Module: A single module replaces three separate adapters, supporting USB-to-TTL (for programming and debugging), USB-to-RS485 (for PC-to-industrial equipment communication), and TTL-to-RS485 (for microcontroller-to-industrial network connection). An onboard DIP switch enables quick, tool-free mode selection, saving time and reducing hardware redundancy.3. Wide Voltage Compatibility & RS485 Auto-Direction: Features a selectable TTL voltage switch (1.8V/3.3V/5V) for safe connection to low-power chips, common MCUs, and Single Board Computers (SBCs) like Raspberry Pi and Jetson. Its built-in hardware circuitry automatically handles RS485 transmit/receive direction switching, eliminating complex software timing control and preventing data loss in communication with industrial sensors, PLCs, or robotic bases.4. High-Speed & Reliable Data Transmission: Supports TTL baud rates up to 6 Mbps and RS485 baud rates up to 12 Mbps with stable and reliable performance. Built-in professional TTL hardware flow control (RTS/CTS) prevents buffer overflow during high-speed data exchange. Onboard TVS and ESD protection, along with clear TX/RX/power indicators, ensure stable operation in electrically noisy environments.5. Plug-and-Play: Designed for convenience, featuring a reversible USB Type-C connector, an external 5V output (up to 300mA) capable of powering connected devices, and included Dupont wires for quick user connections. Comprehensive tutorials and documentation are also provided to help users get started quickly with various microcontrollers and industrial equipment. Parameters:1. Main Chips: CH343P, SP3485EN-MS2. Interface Type: USB Type-C (supports reversible insertion)3. Communication Protocol: TTL (UART) / RS4854. Supported Levels: 1.8V / 3.3V / 5V (capable of external power output, max 300mA)5. Operating Modes: USB-TTL / USB-RS485 / TTL-RS4856. Baud Rate Range: USB-TTL: 50 bps ~ 6 Mbps / USB-RS485: 6 Mbps / TTL-RS485: 12 Mbps7. RS485 Transmission Distance: Depends on the interference resistance capability of the transmission cable, the size of the transmission bytes, and the baud rate. The baud rate and transmission byte size are inversely proportional to the transmission distance.8. Flow Control Support: RTS (Output Control), CTS (Input Control)9. Operating Systems: Windows, Linux, macOS, Android10. Protection Mechanisms: Input reverse connection protection; ESD protection on RS485-A/B pins11. Dimensions: 64.47 millimeters x 20 millimeters x 8.73 millimeters12. Weight: 5.9 gramsSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 5cm / 3.94inch * 1.97inch * 1.97inch Qty per Carton 144 Carton Weight 8.30kgs / 18.30lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 144 pcs = 89280 pcs 40HQ: 1439 cartons * 144 pcs = 207216 pcs

Read more less

1. Features a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed up to 240MHz2. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) with built-in antennas3. Includes 512KB SRAM and 384KB ROM, while stack-integrated with 16MB Flash and 8MB PSRAM4. Features a 4.2-inch full-reflective display with 300 x 400 resolution, offering reflective imaging and eliminating the need for backlighting5. Equipped with a dual-microphone array enabling audio algorithms like noise reduction and echo cancellation, ideal for precise voice recognition and near-field/far-field voice wake-up applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature/humidity sensor for precise RTC time management and environmental monitoring7. Integrated 18650 lithium battery holder and RTC backup battery holder (requires rechargeable RTC battery), supporting dual-mode operation: main power supply and independent RTC backup8. Onboard Micro SD card slot for external storage of images or files9. Two customizable side buttons (KEY and BOOT) for developing user-defined functions10. Reserved 2 x 8-row female header (2.54mm pitch) for external expansionSpecifications1. Display panel: fully reflective screen2. Display size: 4.2 inches3. Display resolution: 300 x 4004. Gray scale levels: 25. Communication interface: SPI6. Display method: fully reflective7. Driver IC: ST73058. Display colors: black, white9. Size: about 9.25 x 6.91 cmPackaging list:- ESP32-S3-RLCD-4.2-EN host x 1- Acrylic stand x 2- 8-ohm 2W MX1.25 2PIN speaker (forward) 80mm x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 11cm * 4cm / 5.51inch * 4.33inch * 1.57inch Qty per Carton 60 Carton Weight 12.00kgs / 26.46lb Carton Size 44cm * 37cm * 35cm / 17.32inch * 14.57inch * 13.78inch Loading Container 20GP: 468 cartons * 60 pcs = 28080 pcs 40HQ: 1086 cartons * 60 pcs = 65160 pcs

Read more less

1. Deserializer: MAXIM (ADI) MAX9296A2. Supported hosts: Raspberry Pi 5, Jetson Orin NX/Nano development kits3. Supported serializer models: MAX9295, MAX96717, MAX96705, etc.4. GMSL input: 2 x GMSL2 (GMSL1 compatible) cameras5. Input interface: 2 x MATE_AX FAKRA Z connectors6. Output interface: 22-pin CSI interface7. Supported GMSL camera models: ISX031, etc.8. Power supply: 5V inputPackage contents:- MAX9296-GMSL-DESER-MODULE x 1- 22-pin FFC cable (about 100mm) x 2- PH2.0 3-pin connector cable x 1- Screw kit x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 14cm * 12cm * 4cm / 5.51inch * 4.72inch * 1.57inch Qty per Carton 72 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 72 pcs = 33624 pcs 40HQ: 1086 cartons * 72 pcs = 78192 pcs

Read more less

1. The Yahboom USB Multi-Function Serial Module is a powerful, high-performance serial communication tool designed to simplify and accelerate embedded development and industrial debugging. It integrates three essential conversion modes onto a compact circuit board: USB-to-TTL, USB-to-RS485, and TTL-to-RS485, eliminating the need for multiple adapters. The module supports 1.8V/3.3V/5V TTL level switching, RS485 hardware automatic direction switching circuitry, and supports high-speed transmission up to 6 Mbps (TTL) and 12 Mbps (RS485), ensuring broad compatibility, reliable data transmission, and a simplified workflow for applications involving STM32, ESP32, Raspberry Pi, Jetson, RDK, and industrial PLCs.2. Tri-function Module: A single module replaces three separate adapters, supporting USB-to-TTL (for programming and debugging), USB-to-RS485 (for PC-to-industrial equipment communication), and TTL-to-RS485 (for microcontroller-to-industrial network connection). An onboard DIP switch enables quick, tool-free mode selection, saving time and reducing hardware redundancy.3. Wide Voltage Compatibility & RS485 Auto-Direction: Features a selectable TTL voltage switch (1.8V/3.3V/5V) for safe connection to low-power chips, common MCUs, and Single Board Computers (SBCs) like Raspberry Pi and Jetson. Its built-in hardware circuitry automatically handles RS485 transmit/receive direction switching, eliminating complex software timing control and preventing data loss in communication with industrial sensors, PLCs, or robotic bases.4. High-Speed & Reliable Data Transmission: Supports TTL baud rates up to 6 Mbps and RS485 baud rates up to 12 Mbps with stable and reliable performance. Built-in professional TTL hardware flow control (RTS/CTS) prevents buffer overflow during high-speed data exchange. Onboard TVS and ESD protection, along with clear TX/RX/power indicators, ensure stable operation in electrically noisy environments.5. Plug-and-Play: Designed for convenience, featuring a reversible USB Type-C connector, an external 5V output (up to 300mA) capable of powering connected devices, and included Dupont wires for quick user connections. Comprehensive tutorials and documentation are also provided to help users get started quickly with various microcontrollers and industrial equipment. Parameters:1. Main Chips: CH343P, SP3485EN-MS2. Interface Type: USB Type-C (supports reversible insertion)3. Communication Protocol: TTL (UART) / RS4854. Supported Levels: 1.8V / 3.3V / 5V (capable of external power output, max 300mA)5. Operating Modes: USB-TTL / USB-RS485 / TTL-RS4856. Baud Rate Range: USB-TTL: 50 bps ~ 6 Mbps / USB-RS485: 6 Mbps / TTL-RS485: 12 Mbps7. RS485 Transmission Distance: Depends on the interference resistance capability of the transmission cable, the size of the transmission bytes, and the baud rate. The baud rate and transmission byte size are inversely proportional to the transmission distance.8. Flow Control Support: RTS (Output Control), CTS (Input Control)9. Operating Systems: Windows, Linux, macOS, Android10. Protection Mechanisms: Input reverse connection protection; ESD protection on RS485-A/B pins11. Dimensions: 64.47 millimeters x 20 millimeters x 8.73 millimeters12. Weight: 5.9 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 72 Carton Weight 9.70kgs / 21.38lb Carton Size 44cm * 34cm * 32cm / 17.32inch * 13.39inch * 12.6inch Loading Container 20GP: 557 cartons * 72 pcs = 40104 pcs 40HQ: 1293 cartons * 72 pcs = 93096 pcs

Read more less

1. A dedicated module for separating the power and data signals on the USB-C interface, which can effectively prevent the computer from reverse power supply and improve the stability of device power supply2. Suitable for various application scenarios such as PiKVM, Raspberry Pi, industrial control, and high-power USB peripherals3. It can provide stable power to the device through an external 5V power supply while maintaining USB communication with the computer or host4. Made of aluminum alloy, it is sturdy and durable5. Interface type: USB Type-C female port x 36. Input power: 5V DC7. Signal channel: USB 2.08. Indicator light: power status indicator9. Shell material: CNC aluminum alloy10. Size: about 3.3 x 2.8 x 1.15 cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 890 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 38cm * 35cm / 18.5inch * 14.96inch * 13.78inch Loading Container 20GP: 426 cartons * 890 pcs = 379140 pcs 40HQ: 990 cartons * 890 pcs = 881100 pcs

Read more less

1. Yahboom IMU sensor module integrates multi-axis MEMS sensors and serves as a core component for motion tracking and posture measurement. The module features a high-performance 32-bit 72MHz processor, supporting real-time attitude resolution and dynamic compensation. It deeply fuses data from gyroscopes, accelerometers, and magnetometers to output precise attitude angles (roll, pitch, and yaw) and triaxial acceleration information. Whether performing 6-axis dynamic initialization or integrating magnetometers and barometers for 9-axis or 10-axis omnidirectional perception, this module delivers stable, reliable, and high-precision motion data solutions for DIY robotics, drones, smart agriculture, and navigation applications. 2. 6-axis: Integrates a 3-axis gyroscope and 3-axis accelerometer, enabling accurate measurement of angular velocity and linear acceleration for a cost-effective solution. 3. 9-axis: Adds a 3-axis magnetometer to the 6-axis module, enabling absolute heading (yaw angle) measurement and effectively eliminating long-term drift. 4. 10-axis: Incorporates a high-precision barometer into the 9-axis setup, enabling altitude measurement—ideal for applications requiring high-precision 3D attitude and position perception. 5. Advanced algorithms ensure stable and reliable posture: Built-in professional sensor fusion algorithms directly output gyroscope, acceleration, Euler angle, and quaternion data, significantly reducing the computational load on the main MCU. 6. Supports IIC/serial communication with exceptional compatibility: The Yahboom IMU module supports Type-C interfaces and pin headers. It is compatible with both IIC and UART communication protocols and features wide-range 3.3V/5V input voltage compatibility. It can connect to PCs for debugging or seamlessly interface with mainstream development platforms like Arduino, Raspberry Pi, STM32, ESP32, Jetson, RDK, and MSPM0. Parameters: 1. Serial baud rate: 115200bps 2. Serial output frequency: Default 25Hz, adjustable from 10Hz to 100Hz 3. IIC clock rate: 100KHz 4. Startup time: 5000ms 5. Operating temperature: -40 to +85 degrees Celsius 6. Storage temperature: -40 to +100 degrees Celsius 7. Impact resistance: 20kg (bare board) 8. Supported devices: Linux-based controllers (PCs, Raspberry Pi, Jetson series, RDK series, etc.); microcontroller-based controllers (STM32, MSPM0, ESP32, Pico, Arduino, etc.) 9. Operating voltage: 5V or 3.3V 10. Operating current: 11mA 11. Product dimensions: 24.5mm x 31mm 12. Product weight: 3.9g 13. ROS support: ROS1/ROS2Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 64 Carton Weight 6.20kgs / 13.67lb Carton Size 30cm * 34cm * 42cm / 11.81inch * 13.39inch * 16.54inch Loading Container 20GP: 622 cartons * 64 pcs = 39808 pcs 40HQ: 1445 cartons * 64 pcs = 92480 pcs

Read more less

1. Yahboom IMU sensor module integrates multi-axis MEMS sensors and serves as a core component for motion tracking and posture measurement. The module features a high-performance 32-bit 72MHz processor, supporting real-time attitude resolution and dynamic compensation. It deeply fuses data from gyroscopes, accelerometers, and magnetometers to output precise attitude angles (roll, pitch, and yaw) and triaxial acceleration information. Whether performing 6-axis dynamic initialization or integrating magnetometers and barometers for 9-axis or 10-axis omnidirectional perception, this module delivers stable, reliable, and high-precision motion data solutions for DIY robotics, drones, smart agriculture, and navigation applications. 2. 6-axis: Integrates a 3-axis gyroscope and 3-axis accelerometer, enabling accurate measurement of angular velocity and linear acceleration for a cost-effective solution. 3. 9-axis: Adds a 3-axis magnetometer to the 6-axis module, enabling absolute heading (yaw angle) measurement and effectively eliminating long-term drift. 4. 10-axis: Incorporates a high-precision barometer into the 9-axis setup, enabling altitude measurement—ideal for applications requiring high-precision 3D attitude and position perception. 5. Advanced algorithms ensure stable and reliable posture: Built-in professional sensor fusion algorithms directly output gyroscope, acceleration, Euler angle, and quaternion data, significantly reducing the computational load on the main MCU. 6. Supports IIC/serial communication with exceptional compatibility: The Yahboom IMU module supports Type-C interfaces and pin headers. It is compatible with both IIC and UART communication protocols and features wide-range 3.3V/5V input voltage compatibility. It can connect to PCs for debugging or seamlessly interface with mainstream development platforms like Arduino, Raspberry Pi, STM32, ESP32, Jetson, RDK, and MSPM0. Parameters: 1. Serial baud rate: 115200bps 2. Serial output frequency: Default 25Hz, adjustable from 10Hz to 100Hz 3. IIC clock rate: 100KHz 4. Startup time: 5000ms 5. Operating temperature: -40 to +85 degrees Celsius 6. Storage temperature: -40 to +100 degrees Celsius 7. Impact resistance: 20kg (bare board) 8. Supported devices: Linux-based controllers (PCs, Raspberry Pi, Jetson series, RDK series, etc.); microcontroller-based controllers (STM32, MSPM0, ESP32, Pico, Arduino, etc.) 9. Operating voltage: 5V or 3.3V 10. Operating current: 11mA 11. Product dimensions: 24.5mm x 31mm 12. Product weight: 3.9g 13. ROS support: ROS1/ROS2Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 64 Carton Weight 6.20kgs / 13.67lb Carton Size 30cm * 34cm * 42cm / 11.81inch * 13.39inch * 16.54inch Loading Container 20GP: 622 cartons * 64 pcs = 39808 pcs 40HQ: 1445 cartons * 64 pcs = 92480 pcs

Read more less

1. Yahboom 8-channel infrared grayscale tracking sensor module is a high-performance intelligent detection module that integrates grayscale recognition and infrared tracking functions. It is specifically designed for projects such as smart robot cars, vehicle tracking, path recognition, and edge detection. 2. This module is equipped with eight highly sensitive infrared photoelectric sensors, capable of detecting changes in ground-reflected light intensity in real-time, thereby accurately identifying black and white lines, grayscale differences, and complex path structures, aiding in achieving more stable and intelligent autonomous driving. 3. To enhance detection stability under different lighting conditions, this module adopts a custom-designed focused infrared emitter and an anti-stray light shield. This structural design effectively suppresses interference from external ambient light, maintaining stable recognition performance even in environments with strong light or high-reflectivity ground surfaces, ensuring smooth robot operation in various application scenarios. 4. This module supports digital signal output and features flexible compatibility, adaptable to multiple mainstream control systems such as Arduino, Raspberry Pi, Micro:bit, STM32, ESP32, and MSPM0, greatly facilitating makers, developers, and students in rapid integration and application across different platforms. 5. To meet diverse application scenario and lighting condition requirements, this module provides four light source versions: white light, red light, blue light, and green light. Users can select the most suitable version based on ground background color and tracking line color to achieve optimal recognition accuracy and anti-interference performance. Parameters: 1. Operating voltage: 5V 2. Operating temperature: -40 to +85 degrees Celsius 3. Mounting aperture: M2.5 or M3 copper pillars, screws 4. Operating current: 85mA 5. Detection line width: 0.5cm to 6cm 6. Detection height: Red, green, blue light versions: 14mm to 22mm; White light version: 10mm to 30mm 7. Fixed hole distance: 16mm to 42mm 8. Product dimensions: 91.1 x 38.8 x 12.1 mm (length x width x height) 9. Output interface: 4 IO interfaces 10. Output signal: Digital quantitySpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 14cm * 8cm * 4cm / 5.51inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 7.10kgs / 15.65lb Carton Size 30cm * 34cm * 47cm / 11.81inch * 13.39inch * 18.5inch Loading Container 20GP: 556 cartons * 120 pcs = 66720 pcs 40HQ: 1291 cartons * 120 pcs = 154920 pcs

Read more less

1. Yahboom 8-channel infrared grayscale tracking sensor module is a high-performance intelligent detection module that integrates grayscale recognition and infrared tracking functions. It is specifically designed for projects such as smart robot cars, vehicle tracking, path recognition, and edge detection. 2. This module is equipped with eight highly sensitive infrared photoelectric sensors, capable of detecting changes in ground-reflected light intensity in real-time, thereby accurately identifying black and white lines, grayscale differences, and complex path structures, aiding in achieving more stable and intelligent autonomous driving. 3. To enhance detection stability under different lighting conditions, this module adopts a custom-designed focused infrared emitter and an anti-stray light shield. This structural design effectively suppresses interference from external ambient light, maintaining stable recognition performance even in environments with strong light or high-reflectivity ground surfaces, ensuring smooth robot operation in various application scenarios. 4. This module supports digital signal output and features flexible compatibility, adaptable to multiple mainstream control systems such as Arduino, Raspberry Pi, Micro:bit, STM32, ESP32, and MSPM0, greatly facilitating makers, developers, and students in rapid integration and application across different platforms. 5. To meet diverse application scenario and lighting condition requirements, this module provides four light source versions: white light, red light, blue light, and green light. Users can select the most suitable version based on ground background color and tracking line color to achieve optimal recognition accuracy and anti-interference performance. Parameters: 1. Operating voltage: 5V 2. Operating temperature: -40 to +85 degrees Celsius 3. Mounting aperture: M2.5 or M3 copper pillars, screws 4. Operating current: 85mA 5. Detection line width: 0.5cm to 6cm 6. Detection height: Red, green, blue light versions: 14mm to 22mm; White light version: 10mm to 30mm 7. Fixed hole distance: 16mm to 42mm 8. Product dimensions: 91.1 x 38.8 x 12.1 mm (length x width x height) 9. Output interface: 4 IO interfaces 10. Output signal: Digital quantitySpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 14cm * 8cm * 4cm / 5.51inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 7.10kgs / 15.65lb Carton Size 30cm * 34cm * 47cm / 11.81inch * 13.39inch * 18.5inch Loading Container 20GP: 556 cartons * 120 pcs = 66720 pcs 40HQ: 1291 cartons * 120 pcs = 154920 pcs

Read more less

1. This product is an AI development board based on ESP32-S3, integrating camera interface (DVP), SPI/QSPI display interface, and audio capture and playback functions, balancing low cost, high performance, and low power consumption to meet diverse smart terminal development needs. It supports integration with online AI platforms such as Xiaozhi/Doubao/DeepSeek, enabling human-computer interaction functions like voice dialogue and Q&A recognition. It also provides an Edge Impulse object detection example supporting real-time and multi-object recognition, suitable for rapid development of AI voice interaction, edge vision detection, HMI screen applications, and smart camera products. 2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a maximum main frequency of 240MHz. 3. Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM and 16MB Flash. 4. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with excellent RF performance. 5. Dual microphone array supporting noise reduction and echo cancellation for high-quality voice interaction. 6. Expansion and interfaces: --SPI/QSPI LCD display interface --24PIN DVP camera interface --USB, I2C, and UART interfaces accessible. 7. Onboard lithium battery charging circuit supports 3.7V lithium battery power supply. 8. Reserved 2 user-defined buttons. 9. The overall solution is highly integrated with rich interfaces, suitable for rapid prototyping and application deployment of AIoT smart terminal products.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 12.60kgs / 27.78lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs 40HQ: 1354 cartons * 96 pcs = 129984 pcs

Read more less

1. Equipped with the Xtensa 32-bit LX7 dual-core processor, with a main frequency up to 240MHz, delivering robust performance; supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), meeting diverse wireless connectivity needs 2. Built-in 512KB SRAM, 384KB ROM, stacked 4MB Flash, and 2MB PSRAM, offering abundant resources 3. Adopts stamp hole design for enhanced integration, facilitating independent baseboard design 4. Rich peripheral interfaces including 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, and 2 × ADC 5. Utilizes LR1121, the third-generation low-power LoRa transceiver from Semtechs LR11xx series 6. Supports Sub-GHz (150MHz to 960MHz), S-band (2.0GHz to 2.1GHz), and 2.4GHz ISM frequency bands 7. Connects to cloud platforms via LoRa or LoRaWAN protocols through gateways to build low-power wide-area networks 8. Supports LoRa, (G)FSK, and LR-FHSS modulation, compatible with SX126X/SX127X frequency bands for seamless product upgrades 9. Integrated AES-128 encryption engine for enhanced data security; onboard TCXO crystal ensures frequency stability under high/low-temperature conditions 10. Suitable for IoT applications including industrial telemetry, smart homes, environmental monitoring, and remote data acquisition 11. Includes C language sample programs and user manuals for streamlined development and rapid deployment 12. Operating frequency bands: LF: 410MHz to 510MHz; HF: 850MHz to 930MHzSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. Equipped with the Xtensa 32-bit LX7 dual-core processor, with a main frequency up to 240MHz, delivering robust performance; supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), meeting diverse wireless connectivity needs 2. Built-in 512KB SRAM, 384KB ROM, stacked 4MB Flash, and 2MB PSRAM, offering abundant resources 3. Adopts stamp hole design for enhanced integration, facilitating independent baseboard design 4. Rich peripheral interfaces including 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, and 2 × ADC 5. Utilizes LR1121, the third-generation low-power LoRa transceiver from Semtechs LR11xx series 6. Supports Sub-GHz (150MHz to 960MHz), S-band (2.0GHz to 2.1GHz), and 2.4GHz ISM frequency bands 7. Connects to cloud platforms via LoRa or LoRaWAN protocols through gateways to build low-power wide-area networks 8. Supports LoRa, (G)FSK, and LR-FHSS modulation, compatible with SX126X/SX127X frequency bands for seamless product upgrades 9. Integrated AES-128 encryption engine for enhanced data security; onboard TCXO crystal ensures frequency stability under high/low-temperature conditions 10. Suitable for IoT applications including industrial telemetry, smart homes, environmental monitoring, and remote data acquisition 11. Includes C language sample programs and user manuals for streamlined development and rapid deployment 12. Operating frequency bands: LF: 410MHz to 510MHz; HF: 850MHz to 930MHzSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. This product is an AI development board based on ESP32-S3, integrating camera interface (DVP), SPI/QSPI display interface, and audio capture and playback functions, balancing low cost, high performance, and low power consumption to meet diverse smart terminal development needs. It supports integration with online AI platforms such as Xiaozhi/Doubao/DeepSeek, enabling human-computer interaction functions like voice dialogue and Q&A recognition. It also provides an Edge Impulse object detection example supporting real-time and multi-object recognition, suitable for rapid development of AI voice interaction, edge vision detection, HMI screen applications, and smart camera products. 2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a maximum main frequency of 240MHz. 3. Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM and 16MB Flash. 4. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with excellent RF performance. 5. Dual microphone array supporting noise reduction and echo cancellation for high-quality voice interaction. 6. Expansion and interfaces: --SPI/QSPI LCD display interface --24PIN DVP camera interface --USB, I2C, and UART interfaces accessible. 7. Onboard lithium battery charging circuit supports 3.7V lithium battery power supply. 8. Reserved 2 user-defined buttons. 9. The overall solution is highly integrated with rich interfaces, suitable for rapid prototyping and application deployment of AIoT smart terminal products.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 12.60kgs / 27.78lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs 40HQ: 1354 cartons * 96 pcs = 129984 pcs

Read more less

1. Modbus RTU Analog Output 8CH is an industrial standard analog output module, supports 8-ch simultaneous output. Adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.2. Supports setting device address (1 to 255) to cascade multiple devices via RS485 bus.3. On-board voltage regulator chip supports wide voltage supply from 7 to 36V.4. On-board integrated power isolation provides stable isolation voltage; the isolated end requires no additional power supply.5. On-board integrated magnetic coupling isolation enables signal isolation, with high reliability and strong anti-interference capability.6. On-board self-recovery fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltage and transient spike voltage in the circuit, protecting against overcurrent, overvoltage, lightning, and static electricity.7. 12-bit DA conversion with high-precision resistors ensures more accurate output data.8. Built-in watchdog ensures stable output without crashing.9. Rail-mounted enclosure design supports stackable combination, enabling easy installation and safer use.10. External 3 LED indicators for convenient viewing of MCU status and signal transmission/reception status. Parameters:1. Communication Interface: RS4852. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560003. Default Communication Format: 9600, N, 8, 14. Modbus Protocol: Standard Modbus RTU Protocol 5. Supply Voltage: DC 7 to 36V6. Output Mode: 8-channel current output / 8-channel voltage output 7. Resolution: 12-bit, 1 microampere / 12-bit, 1 millivolt 8. Range: 0~20mA / 0~10V9. Output Accuracy: +/-0.03mA / +/-0.01VSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 10cm * 6cm / 6.3inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 42cm * 38cm / 12.6inch * 16.54inch * 14.96inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs 40HQ: 1212 cartons * 48 pcs = 58176 pcs

Read more less

1. Yahboom 8-channel infrared grayscale tracking sensor module is a high-performance intelligent detection module that integrates grayscale recognition and infrared tracking functions. It is specifically designed for projects such as smart robot cars, vehicle tracking, path recognition, and edge detection. 2. This module is equipped with eight highly sensitive infrared photoelectric sensors, capable of detecting changes in ground-reflected light intensity in real-time, thereby accurately identifying black and white lines, grayscale differences, and complex path structures, aiding in achieving more stable and intelligent autonomous driving. 3. To enhance detection stability under different lighting conditions, this module adopts a custom-designed focused infrared emitter and an anti-stray light shield. This structural design effectively suppresses interference from external ambient light, maintaining stable recognition performance even in environments with strong light or high-reflectivity ground surfaces, ensuring smooth robot operation in various application scenarios. 4. This module supports digital signal output and features flexible compatibility, adaptable to multiple mainstream control systems such as Arduino, Raspberry Pi, Micro:bit, STM32, ESP32, and MSPM0, greatly facilitating makers, developers, and students in rapid integration and application across different platforms. 5. To meet diverse application scenario and lighting condition requirements, this module provides four light source versions: white light, red light, blue light, and green light. Users can select the most suitable version based on ground background color and tracking line color to achieve optimal recognition accuracy and anti-interference performance. Parameters: 1. Operating voltage: 5V 2. Operating temperature: -40 to +85 degrees Celsius 3. Mounting aperture: M2.5 or M3 copper pillars, screws 4. Operating current: 85mA 5. Detection line width: 0.5cm to 6cm 6. Detection height: Red, green, blue light versions: 14mm to 22mm; White light version: 10mm to 30mm 7. Fixed hole distance: 16mm to 42mm 8. Product dimensions: 91.1 x 38.8 x 12.1 mm (length x width x height) 9. Output interface: 4 IO interfaces 10. Output signal: Digital quantitySpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 14cm * 8cm * 4cm / 5.51inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 7.10kgs / 15.65lb Carton Size 30cm * 34cm * 47cm / 11.81inch * 13.39inch * 18.5inch Loading Container 20GP: 556 cartons * 120 pcs = 66720 pcs 40HQ: 1291 cartons * 120 pcs = 154920 pcs

Read more less

1. Yahboom 8-channel infrared grayscale tracking sensor module is a high-performance intelligent detection module that integrates grayscale recognition and infrared tracking functions. It is specifically designed for projects such as smart robot cars, vehicle tracking, path recognition, and edge detection. 2. This module is equipped with eight highly sensitive infrared photoelectric sensors, capable of detecting changes in ground-reflected light intensity in real-time, thereby accurately identifying black and white lines, grayscale differences, and complex path structures, aiding in achieving more stable and intelligent autonomous driving. 3. To enhance detection stability under different lighting conditions, this module adopts a custom-designed focused infrared emitter and an anti-stray light shield. This structural design effectively suppresses interference from external ambient light, maintaining stable recognition performance even in environments with strong light or high-reflectivity ground surfaces, ensuring smooth robot operation in various application scenarios. 4. This module supports digital signal output and features flexible compatibility, adaptable to multiple mainstream control systems such as Arduino, Raspberry Pi, Micro:bit, STM32, ESP32, and MSPM0, greatly facilitating makers, developers, and students in rapid integration and application across different platforms. 5. To meet diverse application scenario and lighting condition requirements, this module provides four light source versions: white light, red light, blue light, and green light. Users can select the most suitable version based on ground background color and tracking line color to achieve optimal recognition accuracy and anti-interference performance. Parameters: 1. Operating voltage: 5V 2. Operating temperature: -40 to +85 degrees Celsius 3. Mounting aperture: M2.5 or M3 copper pillars, screws 4. Operating current: 85mA 5. Detection line width: 0.5cm to 6cm 6. Detection height: Red, green, blue light versions: 14mm to 22mm; White light version: 10mm to 30mm 7. Fixed hole distance: 16mm to 42mm 8. Product dimensions: 91.1 x 38.8 x 12.1 mm (length x width x height) 9. Output interface: 4 IO interfaces 10. Output signal: Digital quantitySpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 14cm * 8cm * 4cm / 5.51inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 7.10kgs / 15.65lb Carton Size 30cm * 34cm * 47cm / 11.81inch * 13.39inch * 18.5inch Loading Container 20GP: 556 cartons * 120 pcs = 66720 pcs 40HQ: 1291 cartons * 120 pcs = 154920 pcs

Read more less