Test Equipment

1. Contains 9 sets of power outage saving functions.2. Temporarily store current capacity and energy when power is off.3. Reopen the opportunity to accumulate the current capacity and energy used.4. Manual removal if no accumulation is required.5. Voltage current and capacity display on the same LCD screen, no need for cumbersome operations, only need to connect to the USB interface, you can monitor the phone’s charging status in real time.6. Intelligently memory charging capacity, can save the mAH input from 9 sets of charging devices after power off. Easy to view and check whether the charging device’s capacitance is true.7. U disk current detection, the working current of the u disk is between 50-100mA, when is exceeds 100mA, the u disk may be faulty.8. USB interface voltage detection, the external voltage of the USB interface on the computer is 5V+/-5%, the output current is relatively constant, generally 500mA, and the notebook computer only has 100mA.Specifications:1. Material: ABS2. Color: White, Black3. Current: 0-5A4. Voltage: 4-30V5. Timing: 0-99 hours6. Power: 0-150W7. Capacity: 0-999999mAh8. Inner temperature: 0-80 degree C9. Divide into groups: 0-9 group10. Charging resistance: 0-999.9ohms11. Positive voltage: 0-10V12. Negative voltage: 0-10V13. Item size: 56.6 x 24.7 x 11.2mm14. Item weight: 13.9g15. Package size: 14.7 x 9.4 x 1.2cm/5.78*3.70*0.47in16. Package weight: 17.3g

Read more less

1. This Thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard toreach objects without contact safely and quickly.2. LCD Backlit display3. Celsius/Fahrenheit switching, Auto-off4. Temperature range：-50~400 celsius (-58~752 Fahrenheit)5. Response time：500 mSec, 95% response6. Spectral response：5~14 um7. 2 X 1.5V AAA battery(Not Included)

Read more less

1. Large LCD 2. Data hold3. With differential mode and record mode 4. USB port 5. Reset and data adjustment 6. Low battery indication and automatic power off7. 4 x AAA battery(Not Included)

Read more less

1. This infrared thermometer is used for measuring the tem perature of the object's surface, which is applicable for va rious hot, hazardous or hard-toreach objects without contact 2. Safely and quickly3. Response time 500 mSec, 95% response4. Spectral response: 5-14 um5. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit6. 9V battery(Not Included)

Read more less

1. Measuring PH value of the solution2. Measuring the temperature of the solution3. LCD backlight hold4. Data hold 5. Temperature unit switch6. Power off memory 7. Solution temperature compensation8. Low battery indication

Read more less

1. Auto calibration to assure the accuracy.2. Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not.3. 10 thickness measurement storage and recall function available, which facilitates the height work or working in wild area.4. Sound velocity measurement: With a given thickness by sample hardware to measure the sound velocity, which avoids the further conversion or consultation of the table.5. 12 sound velocity for different material which also adjus- table.6. Low battery indication7. Auto power off mode designed to conserve battery life.8. More than 10000 times long lift keys.9. The unit has a special memory that retains all of its setting even when the power is off.10. Power supply: 3 X 1.5V AAA batteries(Not included)

Read more less

1. Measuring PH value of the solution2. Measuring the temperature of the solution3. LCD backlight hold4. Data hold 5. Temperature unit switch6. Power off memory 7. Solution temperature compensation8. Low battery indication

Read more less

1. This unit consists of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display.2. The Optics collected the infrared energy emitted by object and focus on the Sensor. Then the sensor translates the energy into an electrical signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.3.Spectral response: 8um -14um4. Data retention, C / F temperature unit conversion.5. LCD backlight, automatic shut-down6. 2 x AAA battery(Not Included)

Read more less

1. 14-grain varieties to choose from2. Grain moisture testing3. Grain moisture standard setting4. Moisture limit-setting and voice prompt5. Deviation adjustment6. 4 types of voice reminders7. Dual rod sensors (metal probes)8. LCD backlight display9. Low battery alert10. Automatic shutdown function11. 4 x AA battery(Not Included)

Read more less

1. Insulation Resistance Measurement 2. Alternating Current (AC) Measurement 3. Direct Current (DC) Measurement4. Small Resistance Measurement 5. Measured Data Holding 6. Low Battery Indication 7. Large LCD digital display 8. Over-limit Alarm 9. Red Alarm Light, Buzzer Alarm 10. High Voltage Alarm11. 6 x AA batteries or external DC 9V power supply(Not Included)

Read more less

1. Measure current wind speed, temperature2. Measure wind speed / MAX wind flow/min wind flow3. 2 / 3 wind flow value / average value4. Wind speed / flow units and temperature units selection5. Real-time measurement when connecting USB with computer software6. Backlight and data holding( HOLD)7. Low battery indication8. Powered by rechargeable lithium-ion batteries9. Automatic shutdown setting

Read more less

1. Large LCD backlight digital and character display for easier reading.2. Safety indication: regular light flashing and voice indication. When carbon monoxide concentration increases, buzzing voice frequency would also be increased.3. Excellent audible alarm, low maintenance cost.4. Support carbon monoxide detection.5. Solid shell and robust electric characters.6. Automatically shut off if it is not operated for 10 minutes.7. Review of MAX and MIN readings, MAX, AVG and Data hold function.8. Buzzer alarm setup function.9. 2 x AAA battery(Not Included)

Read more less

1. Measure current wind speed, temperature2. Measure wind speed / MAX wind flow/min wind flow3. 2 / 3 wind flow value / average value4. Wind speed/flow units and temperature units selection5. Real-time measurement when connecting USB with computer software6. Backlight and data holding( HOLD)7. Low battery indication8. Powered by rechargeable lithium-ion batteries9. Automatic shutdown setting8. 4 x AAA batteries (Not Included)

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. 2.49KPa digital pressure manometer, with USB port2. Large LCD, data hold3. With differential mode and record mode4. Reset and data adjustment5. Low battery indication and automatic power off6. 4 x AAA battery(Not Included)

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. High precision, high reliability, suitable for high-end applications2. Small size, can display voltage and current at the same time3. Reverse connection protection, reverse connection will not burn, using common ground design4. Anti-collision design with shell, more durable5. Adopt industry standard size, more convenient to install6. Ambient temperature: -15 to 70 degrees Celsius7. Measuring voltage: DC0-100V, 0-10A8. Working voltage: DC4.5-30V9. Working air pressure: 80-106kpa10. Working current: less than or equal to 20 mA11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply.12. Dimensions: 48 x 29 x 21cm13. Weight: about 15g

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Power supply mode: POE or USB2. Device power: less than 1.5W3. Working voltage: 5V4. Working current: less than 300mAFactory default parameters1. Username: Pcsensor2. Password: admin3. IP: 192.168.1.1884. Gateway: 192.168.1.15. Subnet mask: 255.255.255.06. Port: 52007. Web page refresh interval: 5 seconds8. Website URL: http://192.168.1.188:5200 (equipment supports secondary development, please consult sales staff for details)Product use: If the user is just starting to use the device, please follow the steps below:1. Access the probeThere are 2 types of voltage measurement modes for the device, namely single-ended measurement and differential measurement.1.1. Single-ended measurement: Voltage range: 0 to 40V, accuracy 0.05VWhen using single-ended measurement, the device can measure up to 4 voltages at the same time, and the ground wire of the device must be connected to the ground wire of the measurement signal.1.2. Differential measurement: Voltage range: -40 to 40V, accuracy 0.05VWhen using differential measurement, the device can measure up to two voltages at the same time. The ground wire of the device does not need to be connected to the ground wire of the measurement signal. It is only necessary to connect the two test leads under the same probe to both ends of the signal to be measured.2. Access the network cableUse a network cable to connect the device to the computer, and modify the network parameters of the computer to: IP: 192.168.1.100 (the last digit is not 188); subnet mask: 255.255.255.0; gateway: 192.168.1.13. Plug in USB power4. Open the software4.1. After opening the software, it will pop up whether to load historical devices, select No4.2. Then the Add Device dialog box will pop up, enter the IP and port of the device, the factory default IP is 192.168.1.188, and the port is 5200. Then click "OK" to add the device5. Enter the device password: in order to prevent the device from being arbitrarily modified, each device can set a password, the default password is admin6. Select ModeSince different devices have different measurement and control modes, the user needs to select the appropriate measurement and control mode, and the user needs to select the normal measurement and control mode, and the mode selection is at the upper left of the software.7. Start loading dataAfter adding the device and selecting the mode, click Start on the upper right to read the data; so far, the user has been able to detect the temperature and humidity data normally8. Modify device parameters: the user needs to add the device to the local network, and needs to modify the network parameters of the device to match the parameters of the local network, click the device information on the upper left, and the setting interface will pop up, where the user can modify: device name, Device password, device gateway, device IP, port, subnet mask, MAC address and other data. After clicking save, the device will automatically restart and run according to the set parameters.9. Reset the deviceIf the user has set some parameters or performed some operations and the device cannot be connected, you can press and hold the reset button of the device for more than 5s. At this time, the red, green and blue lights on the device will flash at the same time, indicating that the device is successfully reset and all settings are restored to the factory. status, the user can reset it.10. Web page functionThe user can also operate the device through the web page without installing the software (the device and the computer are required to be in the same local area network).Open the browser, enter the URL: 192.168.1.188:5200 (factory default parameters, if the user has modified the IP and port, input according to the modified parameters).11. Remote operationThe device can automatically upload the data to the server, and the user only needs to use the computer software or mobile phone client to realize the remote operation of the device11.1. Ensure that the network cable connected to the device can be connected to the external network normally11.2. Confirm that the network parameters of the device are correct; then, add the device that needs to be uploaded to the server into the software;11.3. At the top right of the software, there is a registration option. Users need to register an account first. After registering the account, log in to the account, and then there will be local network uploading and connecting network devices. Click the local network upload and wait for the device to connect to the server. When the upload is prompted, the user can log in to the same account through any computer or mobile phone that can access the Internet, and then click to connect to the network device, the software will automatically load the device under the account name, so that the user can remotely operate the device.

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Temperature-added style: You can switch the display temperature by pressing the button. When the temperature is displayed, only the power and temperature can be displayed, but the voltage cannot be displayed. 2. Color LCD, clear display, accurate measurement 3. Customize to meet the needs of various battery parameters 4. The battery voltage can be set, and the battery voltage can be measured in a wide range 5. Independent wiring, simple wiring 6. Power on the LCD display to work, you can switch the parameters displayed on the screen you need 7. Backlight control, the backlight can be turned on or off by the switch key 8. Embedded installation, flexible and not easy to break 9. Panel analysis, allowing you to receive products, easy to operate 10. When the battery low voltage alarm: the battery frame flashes 11. External precision adjustable potentiometer to calibrate voltage 12. Battery type: lead acid, lithium iron phosphate, ternary lithium iron 13. Voltage: DC7-70V 14. Temperature: -20 to 70 degrees Celsius 15. Application scenarios: battery test system, inverter power system, photovoltaic system, various battery power monitoring, assembly line test, automotive electronics 16. Dimensions: 61.3x33.3x13.5mm 17. Weight: 20g Precautions 1. Please read the instructions carefully before using the product 2. Exceeding the operating voltage range will cause damage to the product 3. This product is for indoor use, please do not use it outdoors 4. When users need to adjust the product voltage, they can make fine adjustments by rotating the potentiometer

Read more less

1. Widely used in metal wire line occasions such as telephone system, computer network, video network, optical communication engineering and so on.2. Adopt LCD intuitive display screen, data display is clearer, POE mode, digital mode, analog mode can be switched freely.3. POE test function: This tool can be used to test standard and non-standard POE equipment, as well as POE voltage, power supply polarity and power supply mode.4. Voltage test function: You can click "V" to enter the voltage test function, you can measure the battery voltage and voltage polarity, and then press "V" to enter the test mode.5. Adjustable sensitivity: when you receive a strong signal, turn down the stereo; when you receive a weak signal, please pick up the audio equipment, it can give you more accurate test data.6. With the LED flashlight function, the flashlight can be turned on when the light is weak or used at night, so that you can use it normally in the dark environment.parameter:1. Material: ABS2. Power supply: Transmitter: 3 AA batteries (not included) Receiver: 9V (not included)3. Analog cable trace: yes4. Digitized Cable Tracing: Yes5. Tracking cable that supports PoE: Yes6. Identify cable pairs and connection quality: yes7. Battery Voltage Polarity Check: Yes8. Battery voltage measurement (for reference only): Yes9. PoE voltage polarity check: yes10. PoE voltage measurement (for reference only): Yes11. Check breakpoints: yes12. Continuity Test: Yes13. Trace signal transmission distance: 3Km14. Output signal level: ~ 15Vp-p15. Vibration indication: ET613 only16. Flashlight: Yes17. Adjustable volume: yes18. Low battery indicator: yesPacking list:1 x Transmitter1 x Receiver3 x wires

Read more less

1. High precision, high reliability, suitable for high-end applications2. Small size, can display voltage and current at the same time3. Reverse connection protection, reverse connection will not burn, using common ground design4. Anti-collision design with shell, more durable5. Adopt industry standard size, more convenient to install6. Ambient temperature: -15 to 70 degrees Celsius7. Measuring voltage: DC0-100V, 0-10A8. Working voltage: DC4.5-30V9. Working air pressure: 80-106kpa10. Working current: less than or equal to 20 mA11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply.12. Dimensions: 48 x 29 x 21cm13. Weight: about 15g

Read more less

1. Widely used in metal wire line occasions such as telephone system, computer network, video network, optical communication engineering and so on.2. Adopt LCD intuitive display screen, data display is clearer, POE mode, digital mode, analog mode can be switched freely.3. POE test function: This tool can be used to test standard and non-standard POE equipment, as well as POE voltage, power supply polarity and power supply mode.4. Voltage test function: You can click "V" to enter the voltage test function, you can measure the battery voltage and voltage polarity, and then press "V" to enter the test mode.5. Adjustable sensitivity: when you receive a strong signal, turn down the stereo; when you receive a weak signal, please pick up the audio equipment, it can give you more accurate test data.6. With the LED flashlight function, the flashlight can be turned on when the light is weak or used at night, so that you can use it normally in the dark environment.parameter:1. Material: ABS2. Power supply: Transmitter: 3 AA batteries (not included) Receiver: 9V (not included)3. Analog cable trace: yes4. Digitized Cable Tracing: Yes5. Tracking cable that supports PoE: Yes6. Identify cable pairs and connection quality: yes7. Battery Voltage Polarity Check: Yes8. Battery voltage measurement (for reference only): Yes9. PoE voltage polarity check: yes10. PoE voltage measurement (for reference only): Yes11. Check breakpoints: yes12. Continuity Test: Yes13. Trace signal transmission distance: 3Km14. Output signal level: ~ 15Vp-p15. Vibration indication: ET613 only16. Flashlight: Yes17. Adjustable volume: yes18. Low battery indicator: yesPacking list:1 x Transmitter1 x Receiver3 x wires

Read more less

1. High precision, high reliability, suitable for high-end applications 2. Small size, can display voltage and current at the same time 3. Reverse connection protection, reverse connection will not burn, using common ground design 4. Anti-collision design with shell, more durable 5. Adopt industry standard size, more convenient to install 6. Ambient temperature: -15 to 70 degrees Celsius 7. Measuring voltage: DC0-100V, 50A 8. Working voltage: DC4.5-30V 9. Working air pressure: 80-106kpa 10. Working current: less than or equal to 20 mA 11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply. 12. Dimensions: 48 x 29 x 21cm 13. Weight: about 15g

Read more less

Features:1. Extremely fast measurement, intelligent identification2. NCV non-contact induced voltage, two-color screen display, buzzer alarm sound3. Line breakpoint detection, use the NCV function to induce voltage, find the normal place along the power line to alarm, the power failure induction becomes weak or does not respond4. Automatic identification, live line/zero line distinction, breakpoint detection, sound and light alarm, on-off beep, automatic shutdown, NCV voltage detection, replaceable test leads, flashlight, etc.5. AC voltage test, direct measurement after power on6. With a non-contact infrared thermometer, the double insulating body material greatly improves the safety standard7. High-brightness flashlight and light-emitting screen, can be used as auxiliary lighting in dark environment at nightParameter:1. Range: 0-500V2. Resistance: 0-2 megohms3. Frequency: 40-400Hz4. Power supply: 2 x AAA batteries (not included in shipment)5. Automatic shutdown: 5 minutes6. On-off buzzer: the measured resistance is less than 50 ohms, the buzzer sounds7. Dimensions: 22 x 22.5 x 188mm8. Net weight: 52gPacking list:-.1 x host-.1 x Chinese and English dual instruction manual-.1 x test lead-.1 x screwdriver-.1 x box

Read more less

1. Screw fixed, easy wiring, button switch2. Suitable for RV, tourist car, yacht and other environments.3. Unique fashion panel design, 3-speed rocker switch4. Panel material: aluminum5. Overload protection, safer and more secure to use6. Rated voltage: 12V7. Rated current: 10A8. Dimensions: 83x64x52mm

Read more less

Features: 1. Dual-function anti-burn multimeter, smart test pen, fully automatic 2. Sound and light alarm, two-color display 3. Easy detection of LIVE zero firewire jack line 4. Automatic identification, live line/zero line distinction, breakpoint detection, sound and light alarm, on-off beep, automatic shutdown, NCV voltage detection, replaceable test leads, flashlight, etc. 5. Directly measure AC and DC voltage and resistance on and off when power on, no need to shift gears 6. Non-contact zero-fire judgment, insulation operation, safety check 7. High-brightness LED, powerful wick, high-brightness output, high-transmittance reflector, using anti-reflection tempered lens, large-scale spot coverage 8. Extremely fast measurement, intelligent identification 9. High sensitivity mode, top induction, identify dangerous voltage signals Parameter: 1. Range: 0-500V 2. Resistance: 10 megohms 3. Voltage frequency: 1000Hz 4. Power supply: 2 AA batteries (not included in shipment) 5. Automatic shutdown: 5 minutes 6. On-off buzzer: the measured resistance is less than 30 ohms, the buzzer sounds 7. Non-contact voltage detection alarm: 6-1000V AC voltage 8. Storage temperature: -10 to 60 degrees Celsius 9. Working temperature: 0-40 degrees Celsius 10. Dimensions: 12.7 x 4.2 x 2.5CM 11. Net weight: 67g Packing list: -.1 x host -.1 x Chinese and English dual instruction manual -.1 x test lead -.1 x screwdriver -.1 x box

Read more less

1. Data hold function, photometric unit conversion, high-precision measurement2. Large-screen LCD display visible light intensity3. No operation for 15 minutes, automatic shutdown function4. The meter will automatically detect the battery current, when the low battery symbol is displayed, please replace the battery in time5. Suitable for hospitals, shopping malls, gyms, offices, gymnasiums, hotels, etc.6. Can be used to measure the brightness of visible light in the environment to be tested7. Power supply mode: 1 x 9V battery (not included in the product)8. Measuring range: 0.1-200000 Lux, 0.01-20000Fc9. Sampling rate: 2 times/second10. Resolution: 0.1Lux/ 0.01Fc11. Dimensions: 145x67x32mm

Read more less

1. This infrared thermometer is used for measuring the tem perature of the objects surface, which is applicable for va rious hot, hazardous or hard-toreach objects without contact 2. Safely and quickly 3. Response time 500 mSec, 95% response 4. Spectral response: 5-14 um 5. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit 6. Power: 2 x AAA battery(Not Included) 7. Measuring range: -50-550 Celsius

Read more less

1. This infrared thermometer is used for measuring the tem perature of the objects surface, which is applicable for va rious hot, hazardous or hard-toreach objects without contact 2. Safely and quickly 3. Response time 500 mSec, 95% response 4. Spectral response: 5-14 um 5. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit 6. Power: 2 x AAA battery(Not Included) 7. Measuring range: -50-400 Celsius

Read more less

1. Mini digital sound level meter with stable and reliable performance.2. Wide measurement range from 30dB to 130dBA.3. Data hold function, maximum and minimum value measurement.4. LCD display with backlight, convenient to use at night.5. Low battery indication, automatic & manual power off function.6. Compact and light, convenient to hold and carry.7. Equipped with sponge ball for sensor protection.6. Power supply: 3 x 1.5V AAA battery (Not included)

Read more less

1. One EMF Tester with two uses, testing the electric field and the magnetic field radiation at the same time.2. Measure radiation of high voltage power lines, appliances, electrical wires.3. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.4. Data hold and max measurement, one-key lock the radiation value.5. Large & clear LCD display of the values for easy reading.6. Easy to operate with easy one-hand operation, easy to carry and make field measurement.7. Can measure the environment temperature with 2 temperature units (C/F).8. Electric field strength range: 0~1999V/m9. Electric field strength resolution: 1V/m10. Magnetic field strength frequency range: 20Hz~300Hz11. Electric field strength frequency range: 20Hz~3500MHz12. Power Supply: 3 x 1.5V AAA battery (Not included)

Read more less

1. One EMF Tester with two uses, testing the electric field and the magnetic field radiation at the same time.2. Measure radiation of high voltage power lines, appliances, electrical wires.3. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.4. Data hold and max measurement, one-key lock the radiation value.5. Large & clear LCD display of the values for easy reading.6. Easy to operate with easy one-hand operation, easy to carry and make field measurement.7. Can measure the environment temperature with 2 temperature units (C/F).8. Electric field strength range: 0~1999V/m9. Electric field strength resolution: 1V/m10. Magnetic field strength frequency range: 20Hz~300Hz11. Electric field strength frequency range: 20Hz~3500MHz12. Power Supply: 3 x 1.5V AAA battery (Not included)

Read more less

1. Mini digital sound level meter with stable and reliable performance.2. Wide measurement range from 30dB to 130dBA.3. Data hold function, maximum and minimum value measurement.4. LCD display with backlight, convenient to use at night.5. Low battery indication, automatic & manual power off function.6. Compact and light, convenient to hold and carry.7. Equipped with sponge ball for sensor protection.6. Power supply: 3 x 1.5V AAA battery (Not included)

Read more less

1. Mini lux meter with stable, safe and reliable measurement.2. Wide measurement range 0-200,000 lux and automatic/manual range shift.3. Measuring unit is switchable: Lux or FC.4. MAX / MIN / Data hold functions, high accuracy.5. LCD display with backlight for easy operation in darkness.6. Low battery indication & Auto power off, energy saving.7. Power supply: 3 x 1.5V AAA batteries (Not Included)

Read more less

1. Handheld design and non-slip pen type handle for easy operation.2. Built-in automatic temperature compensation(ATC) to get precise results.3. Measuring Rang: 0.00ppt-9.99ppt 10.0ppt-50ppt, very easy to test.4. With temperature units in C / F(switchable) and switchable backlight for convenient use in dark.5. With a replaceable sensor probe, the electrode probe can be replaced with an insert type design for convenient and fast replacement.6. Suitable for water source monitoring, aquaculture, environmental protection, printing and dyeing, electroplating, beverage industry and scientific research unit to determine the water quality salinity.7. Power supply: LR44 battery x 4pcs(not included).

Read more less

1. Test the pH level and temperature of solution/water with data hold function.2. Pocket size, lightweight and portable with switchable backlight & large LCD display for clear reading.3. Replaceable pH sensor probe - The electrode probe can be replaced with insert type design for convenient and fast replacement.4. ATC function (automatic temperature compensation), automatic calibration and IP65 fully waterproof design.5. Apply in water sources, soil-free growing, aquariums, hydroponics, laboratory, spas, swimming pools and other water systems.6. Power: 2 x AAABattery (Not Included)

Read more less

1. Bottle material: HDPE plastic2. Single bottle capacity: 100ml3. Temperature test paper measuring temperature range: 32~38 degrees Celsius (90 to 100 degrees Fahrenheit)4. Can be used for urine test, easy to operate, help you quickly complete collection and temperature test.5. Thread design: The thread design on the empty bottle cap increases the friction between your hand and the bottle cap, allowing you to unscrew the bottle cap easily.6. Washable and reusable: The urine sample container is washable, you can quickly wash it with water for easy reuse.7. The temperature bar can measure the temperature from 32°C to 38°C, just stick the temperature test paper on the side of the bottle, wait for 20 seconds, different color circles will appear according to the temperature, which is convenient for measurement and observation.packing list: - Temperature test strip x 10- Empty bottle x 2

Read more less

1. Material: ABS2. Power supply voltage: 4.5V3. Wood density selection: 0~9 files4. Power supply: 3 AAA 1.5V batteries (not included)5. Independent function keys, clear and accurate6. With probe rubber protective cover, not easy to fall off, easy to operate7. Energy saving and environmental protection, automatic shutdown after three minutes of no operation8. The temperature unit can be freely converted9. High-precision stylus probe, microwave measurement is faster and more accurate10. High-definition backlight display, easy to read values in bright light during the day and in the dark environment at night11. Weight: 210 grams12. Dimensions: 150x54x27mm

Read more less

1. Power supply voltage: 4.5V2. Power supply: three AA batteries (not included)3. Energy saving and environmental protection, automatic shutdown after three minutes of no operation4. 0-9 wood density gear selection, measure against wood density5. High-frequency electromagnetic wave induction probe, no need for probes, can quickly and accurately measure data6. The upper limit value will beep and alarm7. High-definition backlight display, easy to read the value under strong light at night8. Dimensions: 150x54x27mm9. Weight: about 275 grams

Read more less

1. PH value measurement range: 2.0 PH~8.5 PH2. Automatic shutdown: shutdown after 5 minutes of no operation3. Mode selection: PH/temperature/humidity, three measurement modes4. Scope of application: soil, farming5. High-definition LCD large-screen display, easy to deal with various environments, and can see the value clearly in the dark and strong light environment6. Soil moisture detection, the measurement range is 1 percent~84 percent RH7. Soil temperature detection, measuring range -10~60 degrees Celsius, Fahrenheit / Celsius can be converted8. Battery compartment design, powered by 2 1.5V AA batteries (not included)9. High-precision metal probe, accurate measurement with protective cap design10. One-piece keys feel comfortable11. Probe length: 210mm12. Dimensions: 65x263mm13. Weight: 107 grams

Read more less

1. Measuring range: 0.00~14.002. Power supply: 9V battery (not included)3. Widely used in industry, electric power, agriculture, medicine, food, water quality testing, scientific research and environmental protection and other fields4. Large-screen LCD display, accurate and clear handwriting5. Reserve the bracket port, which can be used by hand or bracket, which is convenient and practical6. PH composite electrode probe, fast, convenient, accurate and easy to deal with various environments7. Connected electrode interface, portable8. Weight: 205 grams9. Dimensions: 159x66x31mm

Read more less

1. Material: plastic2. Use: probe sensor replacement accessories3. High adaptability, sturdy and durable4. Suitable for Smart Sensor PH808/PH818/PH828/PH838/PH8485. Weight: about 80 grams6. Note: This is just an accessory, not the machine

Read more less

1. Measurement principle: resistance method2. Battery compartment design, powered by 4 1.5V AA batteries (not included)3. The safety rope design at the bottom makes the measurement more convenient4. Double rod test, solid metal probe5. Limit setting, upper and lower limit of moisture measurement6. Voice broadcast, four languages can be switched, moisture content report number / high moisture content / silent / beep sound7. High-definition LCD large screen, backlight display, can read in dark environment8. To adjust the deviation, the oven method can be compared with the calibration, and the atmosphere can be adjusted by -3~+5 percent9. Dimensions: 415x72x36mm10. Probe length: 220mm11. Weight: about 200 grams

Read more less