Products

Specification1. USB: USB 3.2 Gen1 x 3 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. HD media interface: HDMI x 2, support 4K 30fps output 4. DSI display: MIPI DSI x 2 (15pin 1.0mm FPC) 5. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 6. Power input: 7V - 36V 7. FAN: 5V / 12V (Allows speed adjustment and measurement) 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. RJ45 Ethernet: Dual Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size:109.0 x 91.5mmPackage List1. CM4-DUAL-ETH-BASE x 1 2. Metal case (top and bottom) x 1 3. Fan-4010-PWM-12V x 1 4. Screwdriver x 1 5. Screws pack x 1 6. 12V 2A power adapter x 1

Read more less

Overview1. Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke2. Low power consumption, analog voltage output, the output level is linear with dust density3. Embedded voltage boost circuit to support wide range of power supplySpecifications1. Sensitivity : 0.5V/(100ug/m3)2. Measurement range : 500ug/m33. Power : 2.5V~5.5V4. Operating current : 20mA(max)5. Operating temperature : -10~65 degree C6. Storage temperature : -20~80 degree C7. Life time : 5 years8. Dimension : 63.2mmx41.3mmx21.1mm9. Mounting holes size : 2.0mm10. Air hole size : 9.0mmApplications1. Air purifier2. Air conditioner3. Air monitor4. PM2.5 DetectorHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: GND3. AOUT: MCU.IO (analog output)4. ILED: MCU.IO (module driving pin)Package Contents1. Dust Sensor × 12. XH2.54 4-pin wire × 1

Read more less

Features1. This is an LTE Cat 6 Raspberry Pi communication HAT with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil... By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions. 2. Multi-constellation high-accuracy GNSS positioning: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS 3. Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed LTE-A communication 5. Standard M.2 B KEY slot, compatible with different core modules: EM06-E, EM06-J, EM06-A series 6. Onboard PWR and RST control pin, enabled via DIP switch, for connecting to external IO to turn on/off or reset the module 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. High efficiency power supply circuit, up to 3A output currentSpecificationsLTE CAT 6: 1. Region / Provider: EMEA / APAC (except Japan and CMCC) / Brazil 2. Module dimensions: 42.0 x 30.0 x 2.3 (mm) Temperature range: 1. Operating temperature: -30 degree C ~ +70 degree C 2. Extension temperature: -40 degree C ~ +85 degree C Frequency band 1. LTE-FDD: B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32) 2. LTE-TDD: B38, B40, B41 3. 2xCA: - B1+B1, B5, B8, B20, B28; - B3+B3, B5, B7, B8, B20, B28; - B7+B5, B7, B8, B20, B28; - B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41 4. WCDMA: B1, B3, B5, B8 5. GNSS: GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS Data rate: 1. LTE-FDD: 300 Mbps (DL) / 50 Mbps (UL) 2. LTE-TDD: 226 Mbps (DL) / 28 Mbps (UL) 3. DC-HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) 4. WCDMA: 384 Kbps (DL) / 384 Kbps (UL)Package List1. M.2 TO 4G/5G HAT x 1 2. EM06-E x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1

Read more less

Features1. OV2640 camera and digital microphone, supports applications like image recognition, voice processing... 2. Standard 40PIN GPIO header, compatible with Raspberry Pi HATs for sorts of IoT applications 3. Integrated Li-ion battery boost charging manager, supports battery charging/discharging, can also be powered from USB connection 4. Compatible with Arduino and ESP-IDF software SDK, seamlessly connecting with ESP-WHO applications 5. Onboard 8MB PSRAM, 4MB FLASH storage, supports SD extension as well 6. CP2102 USB to UART converter, for serial debugging/programming 7. 4x LED indicators, make it easy to check the operating status 8. Comes with development resources and manualSpecifications1. WIFI: 802.11b/g/n 2. BT: V4.2 including legacy BR/EDR and BLE low energy 3. Processor: Xtensa LX6 dual-core processor 240MHz 4. Camera: OV2640 (UXGA 1622 x 1200) 5. SRAM: 520KB+8MB 6. Flash: 448KB+4MB 7. Input voltage: 3.3V~5V 8. Working voltage: 3.3V 9. Charging current: 1A 5V 10. Overall consumption: 7.7mA 5V (ESP32 deep sleep) 11. Dimensions: 65mm x 30.5mm 12. Working temperature: -40 degree C ~ 85 degree CPackage List1. ESP32 One main unit x 1 2. USB-A to micro-B cable x 1 3. Screws pack x 1

Read more less

Features1. Allows controlling up to 253 SC, ST series serial bus servos at the same time (adequate power supply required) 2. Wide range voltage input 6-12V (the input voltage and the servo voltage must be matched) 3. Built-in WiFi and Bluetooth, as well as ESP-NOW support, for remote control and servo debugging 4. Automatic download circuit for easy uploading programs 5. Open source web application and various robot structures 6. Compact size and space saving, suitable for integration into sorts of space-limited projectsSpecifications1. Power supply voltage: DC 6-12V 2. Power Connector: 5.5 x 2.1mm DC 3. Download interface: Type-C 4. Controller: ESP32 5. Control interface: UART 6. Dimensions: 30 x 65mm 7. Mounting hole size: 2.75mm 8. Mounting hole spacing: 23 x 58mmPackage List1. Servo Driver with ESP32 x 1 2. Screws pack x 1

Read more less

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS module

Read more less

1. ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.2. In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.3. Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz4. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory5. Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance6. Using the USB Type-C interface, no need to tangle with the front and back plugs7. The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface8. Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability9. Stamp hole design, can be directly welded and integrated into the bottom plate designed by the user10. Support a variety of low-power working states, adjust the balance between communication distance, data rate and power consumption, and meet the power consumption requirements of various application scenarios

Read more less

1. ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.2. In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.3. Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz4. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory5. Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance6. Using the USB Type-C interface, no need to tangle with the front and back plugs7. The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface8. Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability9. Stamp hole design, can be directly welded and integrated into the bottom plate designed by the user10. Support a variety of low-power working states, adjust the balance between communication distance, data rate and power consumption, and meet the power consumption requirements of various application scenarios

Read more less

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS module

Read more less

1. Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)3. Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM4. Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards5. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios6. Integrated with USB serial port full-speed controller, 34 × GPIO pins allows flexibly configuring pin functions7. 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc.8. Product size: 18 x 23.5mm9. Weight: 2g, 3g

Read more less

1. Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)3. Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM4. Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards5. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios6. Integrated with USB serial port full-speed controller, 34 × GPIO pins allows flexibly configuring pin functions7. 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc.8. Product size: 18 x 23.5mm9. Weight: 2g, 3g

Read more less

1. Pixel: 96 x 48=4608 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: 5V / 2.5A (VH4 connector input)9. Power: within 20W10. Size: 24 x 12cmFeatures:1. 4608 independent RGB led, full color display, brightness adjustable2. 96x48 pixels, 2.5mm pitch, allows displaying text, color image or animation3. 240x120mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Flexible PCB material, can be gently bent, suitable for some application scenarios such as cylinders, spheres and other curved surfaces6. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)

Read more less

1. Suitable for Raspberry Pi series boards2. Uses the IMX477R sensor, which is compact and offers 12.3 megapixels of high resolution and excellent low-light performance3. Uses M12 mount, requires M12 lens to work and can be integrated into industrial and commercial applications where higher visual fidelity is required4. Higher resolution, better imaging5. IR cut filter: integrated6. Lens support: M127. Output: RAW 12/10/8, COMP88. Back focus: Adjustable9. Size: 38x17.8x34.8mm

Read more less

Features 1. Official Raspberry Pi camera module 3 with high resolution and autofocus support, 12MP, adopts the IMX708 sensor and is compatible with Raspberry Pi series boards. 2. With better image quality and freer focus control performance. 3. 12MP High resolution: comes with IMX708 sensor, highly detailed, realistic Imaging 4. Flexible auto-focus: take photos smoothly without jamming, flexible and free 5. Working with for Raspberry Pi: direct connect to for Raspberry Pi different variants including 4B/3B+/3A+/3B/2B/B+/A+,extra FPC cable is required for Zero / Zero 2 W series Specifications 1. Pixels: 11.9MP (4608 × 2592) 2. Sensor: IMX708 3. Focusing: I2C controller with auto-focus support 4. CMOS size: 7.4mm 5. Aperture: F1.8 6. Focal lenth: 4.74mm 7. Field view: 75 degree 8. Devices support: Compatible with all Raspberry Pi motherboard models(Adapter cable is required to access Raspberry Pi Zero series motherboards)

Read more less

Features:1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds11. Support QGNSS software to facilitate setting various module functions12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start13. There are 4 LED indicators on the board to indicate the working status of the module.14. LC29H(AA) GPS HAT has the following features:-Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas-Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time15. LC29H(DA) GPS/RTK HAT has the following features:-Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment16. LC29H(BS) GPS/RTK HAT has the following features:-Supports GNSS original observation and correction data output, suitable for establishing RTK base stationsProduct parameters:1. Frequency bandGPS/QZSS: L1C/A, L5Beidou system: B1I, B2aGalileo: E1, E5aGLONASS: L12. Number of concurrent GNSSGPS/QZSS+Beidou+Galileo+GLONASS3. SensitivityTracking navigation: -165dBmReacquisition: -159dBm, -157dBm, -159dBmCold start: -147dBm, -145dBm, -147dBm4. Dynamic performanceAcceleration (maximum): 4gAltitude (maximum): 10000mSpeed (maximum): 500m/s5. Communication interfaceUART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)6. Protocol: NMEA 0183 V4.10, RTCM 3.x7. Power supply: 5V8. Total current: less than 40mA@5V (continuous mode)9. Operating temperature: -40 to 85 degrees Celsius10. Product size: 65 x 30.5mm11. Weight: 126gPacking list:-LC29H GPS hat x 1-2x20PIN female socket x 1-GPS external antenna (D) x 1-IPEX 1 to SMA cable 17cm x 1-Screw pack x1

Read more less

Features:1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds11. Support QGNSS software to facilitate setting various module functions12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start13. There are 4 LED indicators on the board to indicate the working status of the module.14. LC29H(AA) GPS HAT has the following features:-Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas-Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time15. LC29H(DA) GPS/RTK HAT has the following features:-Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment16. LC29H(BS) GPS/RTK HAT has the following features:-Supports GNSS original observation and correction data output, suitable for establishing RTK base stationsProduct parameters:1. Frequency bandGPS/QZSS: L1C/A, L5Beidou system: B1I, B2aGalileo: E1, E5aGLONASS: L12. Number of concurrent GNSSGPS/QZSS+Beidou+Galileo+GLONASS3. SensitivityTracking navigation: -165dBmReacquisition: -159dBm, -157dBm, -159dBmCold start: -147dBm, -145dBm, -147dBm4. Dynamic performanceAcceleration (maximum): 4gAltitude (maximum): 10000mSpeed (maximum): 500m/s5. Communication interfaceUART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)6. Protocol: NMEA 0183 V4.10, RTCM 3.x7. Power supply: 5V8. Total current: less than 40mA@5V (continuous mode)9. Operating temperature: -40 to 85 degrees Celsius10. Product size: 65 x 30.5mm11. Weight: 126gPacking list:-LC29H GPS hat x 1-2x20PIN female socket x 1-GPS external antenna (D) x 1-IPEX 1 to SMA cable 17cm x 1-Screw pack x1

Read more less

Features:1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds11. Support QGNSS software to facilitate setting various module functions12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start13. There are 4 LED indicators on the board to indicate the working status of the module.14. LC29H(AA) GPS HAT has the following features:-Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas-Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time15. LC29H(DA) GPS/RTK HAT has the following features:-Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment16. LC29H(BS) GPS/RTK HAT has the following features:-Supports GNSS original observation and correction data output, suitable for establishing RTK base stationsProduct parameters:1. Frequency bandGPS/QZSS: L1C/A, L5Beidou system: B1I, B2aGalileo: E1, E5aGLONASS: L12. Number of concurrent GNSSGPS/QZSS+Beidou+Galileo+GLONASS3. SensitivityTracking navigation: -165dBmReacquisition: -159dBm, -157dBm, -159dBmCold start: -147dBm, -145dBm, -147dBm4. Dynamic performanceAcceleration (maximum): 4gAltitude (maximum): 10000mSpeed (maximum): 500m/s5. Communication interfaceUART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)6. Protocol: NMEA 0183 V4.10, RTCM 3.x7. Power supply: 5V8. Total current: less than 40mA@5V (continuous mode)9. Operating temperature: -40 to 85 degrees Celsius10. Product size: 65 x 30.5mm11. Weight: 126gPacking list:-LC29H GPS hat x 1-2x20PIN female socket x 1-GPS external antenna (D) x 1-IPEX 1 to SMA cable 17cm x 1-Screw pack x1

Read more less

1. Suitable for Raspberry Pi Pico and other devices to achieve reliable remote communication2. Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards.3. Features CAN function, adopts SPL interface CAN controller MCP2515 with transceiver SIT65HVD230DR4. Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPvthon examples)l5. Operating voltage: 3.3V-5V6. CAN controller: RMCP25157. CAN transceiver: SIT65HVD230DR8. Communication bus: SPI9. Baudrate: 5K-1000Kbps10. Size: 52 x 21mm

Read more less

1. Official Raspberry Pi hardware debugging toolkit designed for Pico2. Built with RP2040 microcontroller chip designed by for Raspberry Pi3. Integrated design, with solder-free, plug-and-play features, can be connected to the debugging interface of the target board through the SWD interface4. RP2040 microcontroller chip designed by British for Raspberry Pi5. Onboard Micro-USB interface, used to connect to PC or other motherboards6. Onboard 3PIN SWD interface, used to connect the target board7. Onboard 3PIN USB to UART bridge standard CMSIS-DAP interface, compatible with most arm microcontrollers8. Using OpenOCD and other tools that support CMSIS-DAP9. Follow the Raspberry Pi 3PIN debug connector specification10. Comes with transparent plastic case and connecting cable11. Open source program, more convenient for firmware upgrade12. Size: 22x32mm

Read more less

Features1. Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility2. Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. 3 LEDs for indicating the power and transceiver status10. High quality USB-B and RS232 connectors, smoothly plug/pull11. Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to installSpecifications1. Product type: Industrial grade digital isolated converter2. Operating system: for Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 73. Operating temperature: -15℃ ~ 70℃4. Device port: RS232/485/422/TTL5. Host port: USB6. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output7. RS232:- Connector: DB9 male- Protection: TVS diode, surge protection & ESD protection- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps8. RS485/422:- Connector: Screw terminal- Direction control: Hardware automatic control- Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)- Transmission mode: Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more； 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)- Baud rate: 300bps ~ 3Mbps9. TTL (UART):- Connector: Screw terminal- Pins: TXD, RXD, GND, 5V/3.3V- Protection: Clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps10. Indicators:- PWR: Red power indicator, light up when there is USB connection and voltage is detected- TXD: TX indicator, light up when the USB port sends data- RXD: RX indicator, light up when the device ports send data back11. Package contents:- USB TO RS232/485/TTL x1- USB cable x1

Read more less

OverviewThis little module adds arcade controls to your micro:bit, makes it possible to turn the micro:bit into a mini game console. There's onboard buzzer to play music and game background effect. It is powered from a 14500 Li-ion battery (not included), conversely, it allows to charge the battery through USB connection.Features1. micro:bit edge connector, directly pluggable2. High quality joystick, dual channel analog outputs for precise positioning, one channel digital output for press control3. Onboard battery and charge circuitry, powered from battery, also charges the battery through USB connection4. Battery indicator, blinks 1/2/3/4 times indicates the power remains about 25%/50%/75%/100% respectively5. 4x colorful buttons6. 2x side buttons, related to the A/B buttons of micro:bit, easy to use7. Buzzer for playing music and game background effect8. Comes with development resources (micro:bit graphical demo/python code/user manual, etc.)Specifications1. Operating voltage: 5V2. Battery type: 14500 Li-ion3. Dimension: 150mm x 50mm

Read more less

1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interfaceOverviewThis is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.Features1. 128x128 high resolution, 65K colors, clearly displays colorful images2. Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor3. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13512. Interface: 4-wire SPI, 3-wire SPI3. Display color: RGB, 65K colors4. Resolution: 128x1285. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch RGB OLED Module x12. PH2.0 7Pin x1

Read more less

1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interfaceOverviewThis is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.Features1. 128x128 high resolution2. 16 gray scale, better display effect3. Support SPI or I2C interface, configured via onboard resistor4. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13272. Interface: SPI / I2C3. Display color: White4. Gray scale: 165. Resolution: 128x128 (most other competitive products are typically 128x64)6. Viewing angle: >160 degree7. Operating voltage: 3.3V / 5V8. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch OLED Module x12. PH2.0 7Pin x1

Read more less

1. 2.8 inch IPS screen, 640 x 480 pixels, 70% NTSC color gamut.2. Enjoys a smooth gaming experience with 60fps.3. Optical bonding toughened glass panel with anti-fingerprint technique.4. Compatible with Raspberry Pi Zero 2 W.5. Battery indicator light for checking the power of the game console easily.6. Update ROMs via WiFi.Specifications:1. Controller:- Raspberry Pi Zero 2 W-- BCM2710A1 quad-core 64-bit SoC (Arm Cortex-A53 @1GHz)-- 512MB LPDDR2 SDRAM-- 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE2. Display:- 2.8 inch IPS Screen-- 640 x 480 pixels-- Fully laminated toughened glass panel, anti-fingerprint technique-- 70% NTSC color gamut3. Battery: 1500 mAh4. Storage: 32G TF card5. Size: 136.4 x 67.5mmPackage List:1. GPM280 main unit x12. Assembled, with Raspberry Pi Zero 2 W and 32GB TF card3. Screwdriver x14. Power adapter 5V 3A x15. Card reader x16. Cleaning cloth x1

Read more less

1. 2.8 inch IPS screen, 640 x 480 pixels, 70% NTSC color gamut.2. Enjoys a smooth gaming experience with 60fps.3. Optical bonding toughened glass panel with anti-fingerprint technique.4. Compatible with Raspberry Pi Zero 2 W.5. Battery indicator light for checking the power of the game console easily.6. Update ROMs via WiFi.Specifications:1. Controller:- Raspberry Pi Zero 2 W-- BCM2710A1 quad-core 64-bit SoC (Arm Cortex-A53 @1GHz)-- 512MB LPDDR2 SDRAM-- 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE2. Display:- 2.8 inch IPS Screen-- 640 x 480 pixels-- Fully laminated toughened glass panel, anti-fingerprint technique-- 70% NTSC color gamut3. Battery: 1500 mAh4. Storage: 32G TF card5. Size: 136.4 x 67.5mmPackage List:1. GPM280 main unit x12. Assembled, with Raspberry Pi Zero 2 W and 32GB TF card3. Screwdriver x14. Power adapter 5V 3A x15. Card reader x16. Cleaning cloth x1

Read more less

GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868Overview1. This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.2. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W2. Support SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.3. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning4. Bluetooth 3.0, supports data transferring through Bluetooth5. Onboard USB TO UART converter CP2102 for UART debugging6. 6x LEDs for indicating the module working status7. SIM card slot for 1.8V/3V SIM card8. RTC with backup battery holder9. Baudrate auto detection (1200bps ~115200bps)10. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)11. Support SIM application toolkit: GSM 11.14 Release 9912. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GSM/GPRS1. Band- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz- Quad-band auto search- Compliant to GSM phase 2/2+2. Emitting power- Class 4 (2W @ GSM 850/EGSM 900 MHz)- Class 1 (1W @ DCS 1800/PCS 1900 MHz)4. GPRS connectivity- GPRS multi-slot class 12 (default)- GPRS multi-slot class 1~12 (configurable)5. GPRS data feature- Downlink speed: max 85.6kbps- Uplink speed: max 85.6kbps- Coding schemes: CS-1\CS-2\CS-3\CS-4- Support PAP (Password Authentication Protocol) for PPP connection- Support PBCCH- Support USSD6. SMS- Support: MT/MO/CB/Text/PDU mode- SMS storage: SIM card7. Audio- Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate- Support echo cancellation- Support noise reductionGNSS1. Receiver type- 33 tracking channels- 99 acquisition channels- GPS L1 C/A code2. Sensitivity- Tracking: -165 dBm- Cold starts: -148 dBm3. Time-To-First-Fix- Cold starts: 28s (typ.)- Hot starts: < 1s- Warm starts: 26s4. Accuracy- Horizontal position: <2.5m CEPBluetooth1. Integrates AT commands2. Compliant to Bluetooth specification3.0 + EDR3. Support SPP, OPP, HFP/HSP, etc.Misc1. Operating voltage: 5V2. Operating temperature: -40 degree C ~ 85 degree C3. Storage temperature: -45 degree C ~ 90 degree C4. Dimensions: 30.2mm x 65mmWhat is on Board1. SIM868 module2. ZMM5V1: Regulator diode3. SMF05C: TVS diode4. CP2102: USB TO UART converter5. MP1482: Power chip6. NDC7002N: Voltage level translator7. GPS status indicator8. NET indicator:- Flashes fast when the module starts up- Flashes slowly after GSM register succeed9. STA module working status indicator10. SIM868 UART Tx/Rx indicator11. Power indicator12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM86813 .Raspberry Pi GPIO connector14. SIM card slot15. USB TO UART interface16. 3.5mm earphone/mic jack17. GNSS antenna connector18. Bluetooth antenna connector19. GSM antenna connector20. CR1220 battery holder: for RTC backup battery21. UART selection switch- A: Control the SIM868 through USB TO UART- B: Control the SIM868 through Raspberry Pi- C: Access Raspberry Pi through USB TO UARTPackage Contents1. GSM/GPRS/GNSS HAT x12. GSM Antenna x13. GPS External Antenna (B) x14. Bluetooth Antenna x15. USB type A plug to micro plug cable x16. RPi screws pack (2pcs) x1

Read more less

Overview1. 49E hall sensor2. Features wide range voltage comparator LM3933. Adjustable sensitivity4. Signal output indicatorSpecifications1. Power: 2.3V ~ 5.3V2. Dimension: 27.0mm * 15.5mm3. Mounting holes size: 2.0mmApplications1. Motor speed measurement2. Object position detection3. Smart car4. Electronic bricksHow to UseIn the case of working with a MCU:1. VCC : 2.3V ~ 5.3V2. GND: Power supply ground3. AOUT : MCU.IO (analog output)4. DOUT: MCU.IO (digital output)

Read more less

1. Solar cell type: Polysilicon 2. Power: 10 Wp 3. Output power tolerance: +/-3% 4. Conversion efficiency: Greater than 20% 5. Operating voltage: 17.6V 6. Operating current: 0.57A 7. Open circuit voltage: 21.6V 8. Short circuit current: 0.61A 9. Cell quantity: 36 (4x9) 10. Standard system voltage: 1000V 11. Operating temperature: -40 degree C ~ +85 degree C 12. Pressure on panel:30m/s(200kg/sq.m) (Max) 13. Cable length:90 cm 14. Frame material: Anodic oxidation aluminum alloy 15. Dimensions: 340 x 232 x 17 mm 19. Weight:0.935 kg

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1

Read more less

1. RoArm-M1 is a serial robotic arm with a total of 5 degrees of freedom, including the gripping degree of freedom of the gripper2. Two control methods in the demonstration: angle control and coordinate control3. Support Leading-following mode based on ESP-NOW4. Support motion recording and playback control mode5. Based on ESP32, it supports WIFI and UART communication, and provides a variety of motion model demos and cross-platform web applications6. Support multiple host computers and provide rich learning resources such as ROS 2 demo7. Weight: 1.894 kgPacking list:-RoArm-M1 robotic arm x 1-Adapter x 1

Read more less

Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use 3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 4. Adjustable motor drive current via potentiometer, maximum 2.5A current output 5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) 6. Integrates 5V regulator, allows providing power to Raspberry Pi 7. Onboard multi connector options for stepper motors in different specifications 8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)Specifications1. Motor controller: HR8825 2. Motor drive voltage: 8.2V~28V 3. Motor drive current: 2.5A 4. Logic voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Size: 65 x 56mmPackage List1. Stepper Motor HAT (B) x 1 2. RPi screws pack (2pcs) x 1 3. Aluminum heatsink x 1

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.2- Focal Length: 1.88mm- Angle of View (diagonal): 120 degree- Distortion: <13.6%- Lens dimensions: 6.5mm x 6.5mm6. 4 screw holes7. Used for attachment8. Provide 3.3V power output9. Dimension: 25mm x 24mm10. Weight: 12gPacking List:1. IMX219-120 Camera x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 15gPacking List:1. IMX219-160 Camera x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. Supports night vision when works with infrared LEDs3. 8 Megapixels4. Sensor: IMX2195. Resolution: 3280 × 24646. Lens specifications:- CMOS size: 1/4 inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%7. 4 screw holes8. Used for attachment9. Provides 3.3V power output10. Supports connecting infrared LED and/or fill flash LED11. Dimension: 25mm x 24mm12 . Weight: 31gPacking List:1. IMX219-160IR Camera x12. Infrared LED Board (B) 2PCS x13. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Support NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.0- Focal Length: 0.87mm- Angle of View (diagonal): 200 degree- Distortion: <11%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 17gPacking List:1. IMX219-200 Camera x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Support NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.0- Focal Length: 2.96mm- Angle of View (diagonal): 77 degree- Distortion: <1%- Lens dimensions: 6.5mm x 6.5mm5. 4 screw holes6. Used for attachment7. Provide 3.3V power output8. Support connecting infrared LED and/or fill flash LED9. Dimension: 25mm x 24mm10. Weight: 12gPacking List:1. IMX219-77 Camera x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. Supports night vision when works with infrared LEDs3. 8 Megapixels4. Sensor: IMX2195. Resolution: 3280 × 24646. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.0- Focal Length: 2.96mm- Angle of View (diagonal): 77 degree- Distortion: <1%- Lens dimensions: 6.5mm × 6.5mm7. 4 screw holes8. Used for attachment9. Provides 3.3V power output10. Supports connecting infrared LED and/or fill flash LED11. Dimension: 25mm x 24mm12. Weight: 31gPacking List1. IMX219-77IR Camera x12. Infrared LED Board (B) 2PCS x13. 15-pin FFC (opposite sides contact) x1

Read more less

FeaturesThe IMx290-83 IR-CUT Camera is a starlight camera for the Raspberry Pi board and module series. Using a IMX290 starlight sensor with 2 million pixels, onboard IR-CUT, it can freely switch the modes between daytime (RGB) and nighttime (monochrome) through the onboard button.Specifications1. Sensor: IMX290 2. CMOS size: 1/2.8 inch 3. Pixels: 2MP (1920 x 1080) 4. Aperture: F2 5. Focal length: 3.95mm 6. Camera type: Color 7. Field of vies: 98 degree 8. Distortion: Less than 33% 9. Shutter: Rolling Shutter 10. Focusing: Fixed focusPackage List1. IMX290-83 IR-CUT Camera x1 2. 15-pin FFC (opposite sides contact) x1

Read more less

1. Sensor: IMX378 2. CMOS size:1/2.3 inch 3. Camera type: Color Pixels: 12.3MP (4056 x 3040) 4. Shutter: Rolling Shutter 5. Aperture: F2.4 6. Distortion: Less than 58% 7. Field of vies: 190 degree 8. Focal length: 6.5mm 8. Focusing: Fixed focus distance

Read more less

Features1. The RS485 TO LTE CAT4 (EU) is a DIN Rail mounted RS485 cellular modem with European bands, which can realize the data transmission between RS485 and 4G Network. 2. Reliable Serial to 4G Cellular Communication. 3. With RS485 interfaces, full network coverage, wide temperature and wide voltage, multi center transmission. 4. Provides wireless data communications between field serial devices and the central control system to enable remote control of industrial field sites. 5. It is ideal for M2M and IoT applications including distribution automation, smart metering, water & wastewater, heating, street light monitoring and etc.Specifications1. Models: RS485 TO LTE CAT4 (EU) 2. Applicable regions: EMEA, Kor, Thailand, India, Southeast Asia 3. LTE Category: LTE Cat.4 4. Frequency Bands: - LTE FDD: B1/B3/B7/B8/B20/B28A - LTE TDD: B38/B40/B41 - WCDMA: B1/B8 - GSM: B3/B8 5. Transmission Speed: - LTE-FDD: 150Mbps(DL)/50Mbps(UL) - LTE-TDD: 130Mbps(DL)/30Mbps(UL) - DC-HSDPA: 42Mbps (DL) - HSUPA: 5.76Mbps (UL) - WCDMA: 384Kbps(DL)/384Kbps(UL) - GSM(EDGE): 296Kbps (DL)/236.8Kbps (UL) - GSM (GPRS): 107Kbps (DL)/85.6Kbps (UL) Serial Parameters 1. Interface form: RS485(Terminal) x 1 2. Data Bits: 8 3. Stop Bits: 1,2 4. Parity Bits: NONE,ODD,EVEN 5. Baud Rate: 2400~230400 6. Physical Interfaces: SIM/USIM card 1.8V/3V 7. Antenna: SMA Female 8. USB: USB 2.0 9. Indicators: POWER,WORK,NET,LINK,RSSI 10. Reload: Button Hardware Characteristics: 1. Input Voltage: 9V~36V 2. Connector: Terminal 3. Housing material: ABS Plastic 4. Dimensions(mm) L x W x H: 109.66 x 28 x 64.71 mm 5. Operating temperature: -30 degree C~+75 degree C 6. Storage Temperature: -40 degree C~+85 degree C 7. Operating humidity: 5%~95% 9. Storage humidity: 5%~95%

Read more less

Features1. Onboard switch chip, 5x ports 10/100/1000M non-blocking switch architecture 2. Full-duplex 10/100/1000M support for each port (the half-duplex 100M connection is only supported on 10/100M mode) 3. Full/Half-duplex operations with IEEE 802.3x flow control and back pressure support 4. Allow forwarding 9216 bytes huge data packet on linear speed 5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply 6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing 7. 5~36V wide voltage power supply, dual power interface (DC interface and terminal block) onboard overvoltage protection, reverse connection protection. 8. Support 25mm standard rail.Package List1. Gigabit-Switch-5P x 1 2. Power supply screw terminal x 1 3. 12V 1A power adapter x 1

Read more less

Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.Product parameters:1. Frequency band: 2.412-2.484 GHz2. Wireless network: Station / AP / AP+Station mode3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)7. Baud rate: 300-460800 bps8. Check digit: none, odd, even, mark, space9. Data bits: 5-9 bits10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius16. Humidity range: 5%-95% relative humidity17. Product size: 85 x 84 x 24mm18. Weight: 157g, 169gPacking list:RJ45 network port:-RS232/485 to WIFI Ethernet (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1RJ45 network port supporting POE:-RS232/485 to WIFI POE ETH (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1

Read more less

Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.Product parameters:1. Frequency band: 2.412-2.484 GHz2. Wireless network: Station / AP / AP+Station mode3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)7. Baud rate: 300-460800 bps8. Check digit: none, odd, even, mark, space9. Data bits: 5-9 bits10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius16. Humidity range: 5%-95% relative humidity17. Product size: 85 x 84 x 24mm18. Weight: 157g, 169gPacking list:RJ45 network port:-RS232/485 to WIFI Ethernet (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1RJ45 network port supporting POE:-RS232/485 to WIFI POE ETH (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1

Read more less

About The ProtuctThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC. Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.Specifications1. CM4 socket: For all variants of Compute Module 4 2. Networking: - Gigabit Ethernet RJ45 - M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module - Nano-SIM card slot, support standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 2.0 x 3 4. PIN header: Non-isolated RS485 x 2, non-isolated CAN x 1, some GPIO pins 5. Camera: MIPI CSI-2 x 1 (15pin 1.0mm FPC connector) 6. Video: HDMI x 1, support 4K 30fps output 7. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 8. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 9. Fan header: 5V/12V, allows speed adjustment and measurement 10. Power input: 5V or 7~36V 11. Dimensions: 145 x 90 x 40mmPackage List1. CM4-IO-WIRELESS-BASE x 1 2. PCIe to 4G/LoRa adapter x 1 3. Screwdriver x 1 4. Screws pack x 1 5. 12V 2A power adapter x 1

Read more less

About The ProtuctThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC. Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.Specifications1. CM4 socket: For all variants of Compute Module 4 2. Networking: - Gigabit Ethernet RJ45 - M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module - Nano-SIM card slot, support standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 2.0 x 3 4. PIN header: Non-isolated RS485 x 2, non-isolated CAN x 1, some GPIO pins 5. Camera: MIPI CSI-2 x 1 (15pin 1.0mm FPC connector) 6. Video: HDMI x 1, support 4K 30fps output 7. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 8. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 9. Fan header: 5V/12V, allows speed adjustment and measurement 10. Power input: 5V or 7~36V 11. Dimensions: 145 x 90 x 40mmPackage List1. CM4-IO-WIRELESS-BASE x 1 2. PCIe to 4G/LoRa adapter x 1 3. Screwdriver x 1 4. Screws pack x 1 5. 12V 2A power adapter x 1

Read more less

Industrial RS232/RS485 to Ethernet Converter, Dual Serial Ports, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS232/485 TO ETH is an industrial RS232/RS485 to Ethernet converter, which allows bi-directional transparent data transmission between RS232/RS485 and RJ45 port Ethernet, even at the same time, it can be configured via webpage.Features1. M4 series 32-bit ARM processor with up to 120MHz frequency, fast speed, stable and reliable2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Both RS232 and RS485 interface, allows to work independently at the same time, without interfering each other4. Configurable baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space5. Multi indicators, for monitoring communicating and working status6. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)7. Support Modbus, suit for industrial application8. Support Websocket, allows bi-directional transparent data transmission with RS232/RS485 port via webpage directly9. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software10. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data11. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished12. Support customized webpage, allows user to customize the module configuration page13. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change14. KeepAlive mechanism, detects broken connection, auto re-connecting15. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time16. Support DNS domain name resolution, configurable DNS server17. Support DHCP, auto-obtained IP or static IP18. Firmware is upgradable via the network19. Restore to factory settings via software and/or hardware20. Comes with default MAC address, which is customizable21. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software22. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 2KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, Websocket- TX cache: 16Kbyte- RX cache: 16Kbyte2. RS485/RS232:- Connector:-- RS485: screw terminal (A+, B-, GND)-- RS232: DB9 male- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- TX cache: 2Kbyte- RX cache: 2Kbyte- Hardware flow control: RTS/CTS- Interface protection:-- RS485: 2KV ESD protection, lightning-proof, anti-surge, over-current protection-- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~36.0V (5V recommended)- Operating current: 86.5mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -40~85 degree C- Storage temperature: -40~105 degree C5. Size: 85.70*82.76*25.20mmPackage Contents1.RS232/485 TO ETH x12. 5V power adapter x13. Ethernet cable x14. Male-to-Female serial cable x15. Female-to-Female serial cable x1

Read more less

About The ProductOverview 1. This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightningproof, resettable fuse, ESD protection, and TVS diode, etc. It is pretty small in size. 2. The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. Features 1. USB to RS485 communication 2. Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility 3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic 4. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance 5. 3 LEDs for indicating the power and transceiver status Specifications 1. Product type: Industrial converter 2. Baudrate: 300-921600bps 3. Host port: USB 4. Device port: RS485 5. USB: - Operating voltage: 5V - Connector: USB-A - Protection: 200mA self-recovery fuse, ESD protection - Transmission distance: about 5m 6. RS485: - Connector: screw terminal - Pins: A+, B-, GND - Direction control: hardware automatic control - Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) - Transmission distance: about 1200m (low rate) - Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) 7. LED indicators: - PWR: red power indicator, light up when there is USB connection and voltage is detected - TXD: red TX indicator, light up when the USB port sends data - RXD: red RX indicator, light up when the device ports send data back 8. Operating environment: - Temperature: -15 ~ 70 degree - Humidity: 5%RH ~ 95%RH 9. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XPPackage List1. USB TO RS485 x 1 2. USB-A male to female cable x 1 3. Screwdriver x 1

Read more less