Black Friday Week at Garmade ENDS SOON!

Save up to 25%! Don't miss out—check it out now!

Dec 03, 2024 11:59:59

  • For orders below 150€a 5% discount will be automatically applied.
  • For orders between 150€ and 250€a 10% discount will be automatically applied.
  • For orders between 250€ and 500€, a 15% discount will be automatically applied.
  • For orders between 500€ and 1000€, a 20% discount will be automatically applied.
  • For orders of above 1000€, a 25% discount will be automatically applied.

CREALITY 3D Printer Part Spider High Temperature and High Flow Hotend Pro(Red)

Description

Features
1. Spider High Temperature and High Flow Hotend Pro
- High temperature and high flow printing, higher temperature resistant and faster speed.
- High flow printing
- Temperature up to 300 degree C
- No modification required
- Fast heat dissipation
2. Large Melting Zone, High-flow Printing
- The overall melting zone is increased by 30%
- (The melting zone length is 27.3mm), smooth printing even with 0.8mm nozzle
3. Support high-speed printing
- The high-temperature heat-resistant insulation sheet is added to maintain the temperature ofthe melting zone
- Supporting 300mm/s high-speed printing.
- The titanium alloy screws were used to reduce the thermal conductivity by 30%,which can reduce the transfer of heat from the heating zone to the heat dissipation zone and ensure the smooth feeding
4. All-metal Design High Temperature Resistance Up to 300 degree C
- All-metal design for better overall performance, support 300 degree C printing and compatible with various filaments such as PLA, ABS, PETG, TPU PP, PC, nylon, PEEK, PEl, etc.
5. Standardized Interface, No Modification Required
- Small and exquisite external sizewith modular arc interface design,ready to use without modification. Easy installation and maintenance, compatible with most printers on the market
6. Strength Upgrade, Longer lifespan
- The heat break and heat sink are perfect fit to avoid pressure between themand the strength is upgraded to extend the life of the hotend.
7. Structural Upgrade, Faster Heat Dissipation
- The heat dissipation part adopts a split design to reduce heat transfer.
- Red copper heat sink to improve heat dissipation efficiency
8. Material Upgrade for Better Printing
- The heat break is made of titanium and copper allovswhich perfectly fit with each other,and 0.2mm thin wall thickness for excellent thermal insulation.
- The heat block and nozzle are made of copper alloy, and roughness of Ra0.3 on the inner wall of the nozzle to improve print quality.
9. Compatible models:
- For Ender-3 Pro / Ender-3 / Ender-3 V2 / Ender-5 / Ender-5 Pro / Ender-5 Plus Ender-3s / Ender-6 / Ender-4 / Ender-3 Max / Ender-2 Pro / Ender-2 / CR-10S CR-10 / CR-10 S5 / CR-10 S4 / CR-10 Mini / CR-20 / CR-20 Pro series printer.

Specifications
1. Nozzle: 0.4mm, 0.8mm x 7
2. Size: 66x22x23mm
3. N.W.: 61g
4. Color: Red
5. Compatible with Filament: PLA, ABS, PETG,TPU, PP,PC,PA,PEI,etc.
6. Support Filament Diameter: 01.75+/-0.05mm
7. Retraction distance: Up to 5mm(lt can beadjusted according to the printing situation)
8. Overall temperature resistance: 450 degree c (excluding silicone sleeve)
9. The inner diameter of the throat tube: 1.9mm
10. Nozzle, throat tube Ra: Ra less than or equal to 0.25
11. Applicable models: For Creality CR-10 / CR-10S / Ender-2 / Ender-3/ Ender-5 series printer.

Package List
1. Adapter x 1 pcs
2. Copper tube x 1 pcs
3. Thermistor x 1 pcs
4. Thermal grease x 1 pcs
5. Hexagonal wrench x 3 pcs
6. M3X20 screw x 2 pcs
7. M2 limit screw x 2 pcs

CREALITY 3D Printer Part Spider High Temperature and High Flow Hotend Pro(Red)

Product form

SKU: EPR0087

  • In stock (Processing Time 1 - 72 hours)

€65,61

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    Features
    1. Spider High Temperature and High Flow Hotend Pro
    - High temperature and high flow printing, higher temperature resistant and faster speed.
    - High flow printing
    - Temperature up to 300 degree C
    - No modification required
    - Fast heat dissipation
    2. Large Melting Zone, High-flow Printing
    - The overall melting zone is increased by 30%
    - (The melting zone length is 27.3mm), smooth printing even with 0.8mm nozzle
    3. Support high-speed printing
    - The high-temperature heat-resistant insulation sheet is added to maintain the temperature ofthe melting zone
    - Supporting 300mm/s high-speed printing.
    - The titanium alloy screws were used to reduce the thermal conductivity by 30%,which can reduce the transfer of heat from the heating zone to the heat dissipation zone and ensure the smooth feeding
    4. All-metal Design High Temperature Resistance Up to 300 degree C
    - All-metal design for better overall performance, support 300 degree C printing and compatible with various filaments such as PLA, ABS, PETG, TPU PP, PC, nylon, PEEK, PEl, etc.
    5. Standardized Interface, No Modification Required
    - Small and exquisite external sizewith modular arc interface design,ready to use without modification. Easy installation and maintenance, compatible with most printers on the market
    6. Strength Upgrade, Longer lifespan
    - The heat break and heat sink are perfect fit to avoid pressure between themand the strength is upgraded to extend the life of the hotend.
    7. Structural Upgrade, Faster Heat Dissipation
    - The heat dissipation part adopts a split design to reduce heat transfer.
    - Red copper heat sink to improve heat dissipation efficiency
    8. Material Upgrade for Better Printing
    - The heat break is made of titanium and copper allovswhich perfectly fit with each other,and 0.2mm thin wall thickness for excellent thermal insulation.
    - The heat block and nozzle are made of copper alloy, and roughness of Ra0.3 on the inner wall of the nozzle to improve print quality.
    9. Compatible models:
    - For Ender-3 Pro / Ender-3 / Ender-3 V2 / Ender-5 / Ender-5 Pro / Ender-5 Plus Ender-3s / Ender-6 / Ender-4 / Ender-3 Max / Ender-2 Pro / Ender-2 / CR-10S CR-10 / CR-10 S5 / CR-10 S4 / CR-10 Mini / CR-20 / CR-20 Pro series printer.

    Specifications
    1. Nozzle: 0.4mm, 0.8mm x 7
    2. Size: 66x22x23mm
    3. N.W.: 61g
    4. Color: Red
    5. Compatible with Filament: PLA, ABS, PETG,TPU, PP,PC,PA,PEI,etc.
    6. Support Filament Diameter: 01.75+/-0.05mm
    7. Retraction distance: Up to 5mm(lt can beadjusted according to the printing situation)
    8. Overall temperature resistance: 450 degree c (excluding silicone sleeve)
    9. The inner diameter of the throat tube: 1.9mm
    10. Nozzle, throat tube Ra: Ra less than or equal to 0.25
    11. Applicable models: For Creality CR-10 / CR-10S / Ender-2 / Ender-3/ Ender-5 series printer.

    Package List
    1. Adapter x 1 pcs
    2. Copper tube x 1 pcs
    3. Thermistor x 1 pcs
    4. Thermal grease x 1 pcs
    5. Hexagonal wrench x 3 pcs
    6. M3X20 screw x 2 pcs
    7. M2 limit screw x 2 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account