Huawei Replacement Parts

5120 products


  • SP7695.jpg@b262be7a28062885f3554fd2a9d5c725

    TFT Material LCD Screen and Digitizer Full Assembly for Huawei P20 Pro

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei P20 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    613,15 Kč

  • Microphone Board for Huawei P30 Pro-garmade.com

    Microphone Board for Huawei P30 Pro

    1. Microphone board replacement for Huawei P30 Pro. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    182,28 Kč

  • SP7696.jpg@f0dcb8b14bf5f801bb3a16faf3154541

    TFT Material LCD Screen and Digitizer Full Assembly (Not Supporting Fingerprint Identification) for Huawei P30

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei P30 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: No Fingerprint Identification Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.

    533,01 Kč

  • SP3308.jpg@846fecd19cf13d69cc7c210e610aa091

    Charging Port Board for Huawei MediaPad M3 Lite 10 (WIFI Version)

    1. Charging port board replacement for Huawei MediaPad M3 Lite 10 (WIFI Version). 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    228,36 Kč

  • SIM Card Holder Socket Board for Huawei Mate 20 Pro-garmade.com

    SIM Card Holder Socket Board for Huawei Mate 20 Pro

    1. SIM card reader board for Huawei Mate 20 Pro 2. Replace your broken or unusable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    188,94 Kč

  • Charging Port Board for Huawei MediaPad M5 10 / CMR-AL09 / CMR-W09-garmade.com

    Charging Port Board for Huawei MediaPad M5 10 / CMR-AL09 / CMR-W09

    1. Charging port board replacement for Huawei MediaPad M5 10 / CMR-AL09 / CMR-W09. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    309,52 Kč

  • SP7274.jpg@b7719c93cf700b92239ba1ea6a57fd56

    Charging Port Board for Huawei MediaPad M5 lite 10.1

    1. Charging port board replacement for Huawei MediaPad M5 lite 10.1. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    270,86 Kč

  • Fingerprint Sensor Flex Cable Extension for Huawei Honor View 20-garmade.com

    Fingerprint Sensor Flex Cable Extension for Huawei Honor View 20

    1. Fingerprint sensor flex cable extension replacement for Huawei Honor View 20. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    145,41 Kč

  • TFT LCD Screen For Huawei Mate 20 Pro with Digitizer Full Assembly, Not Supporting Fingerprint Identification-garmade.com

    TFT LCD Screen For Huawei Mate 20 Pro with Digitizer Full Assembly, Not Supporting Fingerprint Identification

    Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly replacement part 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    815,14 Kč

  • SP7692.jpg@cf3bc2f3df159200f4e9123bd9f928e0

    TFT Material LCD Screen and Digitizer Full Assembly (Not Supporting Fingerprint Identification) for Huawei P30 Pro

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei P30 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: No Fingerprint Identification

    802,08 Kč

  • 48MPX Back Facing Camera for Huawei Nova 4e / P30 Lite-garmade.com

    For Huawei Nova 4e / P30 Lite 48MPX Back Facing Camera

    1. Back camera for Huawei Nova 4e / P30 Lite(48MPX). 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    347,41 Kč

  • Charging Port Flex Cable for Huawei Mate 20 Pro-garmade.com

    Charging Port Flex Cable for Huawei Mate 20 Pro

    1. Charging port flex cable replacement for Huawei Mate 20 Pro. 2. Replace your broken or unworkable charging port flex cable with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    277,26 Kč

  • Back Housing Cover Adhesive for Huawei P30 Pro-garmade.com

    For Huawei P30 Pro Back Housing Cover Adhesive

    1. Back housing cover adhesive for Huawei P30 Pro. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    145,93 Kč

  • Front Housing LCD Frame Bezel Holder for Huawei Honor 10 Lite-garmade.com

    Front Housing LCD Frame Bezel Holder for Huawei Honor 10 Lite

    1. High quality front housing LCD frame bezel holder replacement for Huawei Honor 10 Lite. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.

    189,19 Kč

  • SP8059.jpg@6af445737080b88c782053da9f161e93

    Charging Port Board for Huawei Y6 (2019)

    1. Charging port board replacement for Huawei Y6 (2019). 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    157,45 Kč

  • For Honor X8 5G OEM LCD Screen with Digitizer Full Assembly-garmade.com

    For Honor X8 5G OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    486,16 Kč

  • LCD Screen and Digitizer Full Assembly for Huawei MediaPad M5 Lite 10 BAH2-W19 BAH2-L09(Black)-garmade.com

    OEM LCD Screen for Huawei MediaPad M5 Lite 10 BAH2-W19 BAH2-L09 with Digitizer Full Assembly(Black)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Huawei MediaPad M5 Lite 10 BAH2-W19 BAH2-L09. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    1.347,90 Kč

  • Touch Panel for Huawei Mediapad M3 BTV-DL09 BTV-W09(White)-garmade.com

    Touch Panel for Huawei Mediapad M3 BTV-DL09 BTV-W09(White)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and be cautious not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement touch screen for Huawei Mediapad M3 BTV-DL09 BTV-W09. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    283,66 Kč

  • Front Housing LCD Frame Bezel Holder for Huawei Honor 8X-garmade.com

    Front Housing LCD Frame Bezel Holder for Huawei Honor 8X

    1. High quality front housing LCD frame bezel holder replacement for Huawei Honor 8X. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.

    189,19 Kč

  • Charging Port Board for Huawei Mediapad 10 Link S10-231-garmade.com

    Charging Port Board for Huawei Mediapad 10 Link S10-231

    1. Charging port board replacement for Huawei Mediapad 10 Link S10-231. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    210,95 Kč

  • SPS6765B.jpg@989dc36228f6853cb12bbc892b8107d9

    For Honor 90 LCD Screen Digitizer Full Assembly with Frame (Black)

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    2.112,35 Kč

  • For Huawei P30 Pro Original In-Display Fingerprint Scanning Sensor Flex Cable-garmade.com

    For Huawei P30 Pro In-Display Fingerprint Scanning Sensor Flex Cable

    1. In-Display fingerprint scanning sensor flex cable replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    200,46 Kč

  • Original LCD Screen for Honor X7 Digitizer Full Assembly with Frame-garmade.com

    LCD Screen for Honor X7 Digitizer Full Assembly with Frame

    About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Honor X7 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    639,00 Kč

  • OEM LCD Screen For Huawei P Smart Pro 2019 Cog with Digitizer Full Assembly-garmade.com

    OEM LCD Screen For Huawei P Smart Pro 2019 Cog with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei P Smart Pro 2019 Cog 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    460,31 Kč

  • LCD Flex Cable for Huawei MatePad T 10s AGS3-L09 AGS3-W09-garmade.com

    LCD Flex Cable for Huawei MatePad T 10s AGS3-L09 AGS3-W09

    1. LCD flex cable ribbon replacement for Huawei MatePad T 10s AGS3-L09 AGS3-W09 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    198,15 Kč

  • Battery Back Cover for Huawei Y9s(Purple)-garmade.com

    Battery Back Cover for Huawei Y9s(Purple)

    1. Back cover replacement for Huawei Y9s 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    198,92 Kč

  • SP5996B.jpg@b85ea6a07756ef4d2ac9298d74793874

    OEM LCD Screen for Huawei Nova 5T / YAL-L21 / TAL-L61 / YAL-L71 / YAL-L61D with Digitizer Full Assembly(Black)

    Before Installation NotesWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Nova 5T / YAL-L21 / TAL-L61 / YAL-L71 / YAL-L61D 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    677,66 Kč

  • Charging Port Board for Huawei Honor Play-garmade.com

    Charging Port Board for Huawei Honor Play

    1. High quality charging port board replacement for Huawei Honor Play. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    161,29 Kč

  • Back Housing Cover Adhesive for Huawei P20-garmade.com

    For Huawei P20 Back Housing Cover Adhesive

    1. Back housing cover adhesive for Huawei P20. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    145,41 Kč

  • Charging Port Board for Huawei Honor 9X-garmade.com

    Charging Port Board for Huawei Honor 9X

    1. Charging port board replacement for Huawei Honor 9X. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    160,77 Kč

  • SP3281LL.jpg@fa8ab5e0a16940365410df8558d97d54

    188,94 Kč

  • SP7643.jpg@bfa80e39c57fba152c9eeec3ab007e1d

    Motherboard Flex Cable for Huawei MediaPad T5 AGS2-W09

    1. Motherboard flex cable ribbon replacement for Huawei MediaPad T5 AGS2-W09 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    161,29 Kč

  • OLED LCD Screen for Huawei P30 with Digitizer Full Assembly-garmade.com

    OLED LCD Screen for Huawei P30 with Digitizer Full Assembly

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly(OLED material) for Huawei P30. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    1.488,45 Kč

  • Original LCD Screen For Honor X7 with Digitizer Full Assembly-garmade.com

    LCD Screen For Honor X7 with Digitizer Full Assembly

    Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Honor X7 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    608,28 Kč

  • For Huawei P30 Front Screen Outer Glass Lens with OCA Optically Clear Adhesive-garmade.com

    For Huawei P30 Front Screen Outer Glass Lens with OCA Optically Clear Adhesive

    About the product 1. Replacement front screen outer glass lens with OCA optically clear adhesive for Huawei P30. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    147,46 Kč

  • Charging Port Flex Cable for Huawei P30 Pro VER.A-garmade.com

    Charging Port Flex Cable for Huawei P30 Pro VER.A

    1. Charging Port Flex Cable for Huawei P30 Pro VER.A. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    210,44 Kč

  • Original LCD Screen For Huawei Nova 5T / Honor 20S with Digitizer Full Assembly-garmade.com

    LCD Screen For Huawei Nova 5T / Honor 20S with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    710,43 Kč

  • Power Button & Volume Button Flex Cable For Honor X7/Play 30 Plus-garmade.com

    Power Button & Volume Button Flex Cable For Honor X7/Play 30 Plus

    1. Volume button & power button flex cable replacement for Honor X7/Play 30 Plus. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    145,41 Kč

  • Cog LCD Screen For Huawei Y9 Prime 2019 with Digitizer Full Assembly-garmade.com

    Cog LCD Screen For Huawei Y9 Prime 2019 with Digitizer Full Assembly

    Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Y9 Prime 2019 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    460,31 Kč

  • Speaker Ringer Buzzer for Huawei Honor Play-garmade.com

    Speaker Ringer Buzzer for Huawei Honor Play

    1. Replacement loud speaker for Huawei Honor Play 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    145,41 Kč

  • Charging Port Board for Honor 50-garmade.com

    Charging Port Board for Honor 50

    1. Charging port board replacement for Honor 50. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    189,19 Kč

  • SIM Card Tray + SIM Card Tray for Huawei Nova 5T (Purple)-garmade.com

    SIM Card Tray + SIM Card Tray for Huawei Nova 5T (Purple)

    1. SIM card tray + SIM card tray for Huawei Nova 5T. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    140,55 Kč

  • LCD Screen and Digitizer Full Assembly for Huawei MatePad T10 AGR-L09 AGR-W03 (Black)-garmade.com

    LCD Screen for Huawei MatePad T10 AGR-L09 AGR-W03 with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei MatePad T10 AGR-L09 AGR-W03 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    877,35 Kč

  • SP4369B.jpg@ebf3702fbb7d4ac1022b542303eb728f

    OEM LCD Screen for Huawei P20 with Digitizer Full Assembly(Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Huawei P20. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    889,38 Kč

  • SP1526B.jpg@b5671054b593674f0fada565b925b7ac

    OEM LCD Screen for Huawei P Smart (2019) / Enjoy 9s with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Huawei P Smart (2019)/ Enjoy 9s. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    654,36 Kč

  • SP4606B.jpg@f17c9bb93810b724128f751eeabb9560

    LCD Screen and Digitizer Full Assembly for Huawei P30 Lite(Black)

    Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product. Replacement LCD display + touch screen digitizer assembly for Huawei P30 Lite. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    654,36 Kč

  • SP4174BL.jpg@81b1f25c151b0ecbd06cc3e03e7c66c8

    Back Cover for Huawei P20 Pro(Black)

    1. Back cover replacement for Huawei P20 Pro 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    182,79 Kč

  • SP9383BL.jpg@98af0eaa53156ab14e83487e38329738

    Battery Back Cover with Camera Lens & Side Keys for Huawei Y6 (2019)(Black)

    1. Back cover replacement for Huawei Y6 (2019) 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    251,91 Kč

Login

Forgot your password?

Don't have an account yet?
Create account