Nokia Replacement Parts

695 products


  • Original Charging Port Board For Nokia 8.3-garmade.com

    Charging Port Board For Nokia 8.3

    1. Charging port board replacement for Nokia 8.3. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    282,72 Kč

  • SP4676.jpg@d8920a6c256b71b8d305871d5ac5f4e9

    Charging Port Board for Nokia 7.1 / TA-1085

    1. Charging port board replacement for Nokia 7.1 / TA-1085. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    173,00 Kč

  • Charging Port Board for Nokia 7 Plus-garmade.com

    Charging Port Board for Nokia 7 Plus

    1. Charging port board replacement for Nokia 7 Plus. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    181,67 Kč

  • SP7788BL.jpg@d5491f9c22b4df7bdd7e28c892148df8

    TFT LCD Screen for Nokia 6 2018 / 6.1 SCTA-1043 TA-1045 TA-1050 TA-1054 TA-1068 with Digitizer Full Assembly (Black)

    About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 6 2018 / 6.1 SCTA-1043 TA-1045 TA-1050 TA-1054 TA-1068. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping . 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.

    396,77 Kč

  • SP0929B.jpg@892b094a930af59fb253f9bff2f4ac6f

    LCD Screen and Digitizer Full Assembly for Nokia 7 Plus / E9 Plus(Black)

    About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 7 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and be cautious not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    441,68 Kč

  • SPS6887.jpg@49917f7cd06b06532d83810c6c2d33b6

    For Nokia G42 OEM LCD Screen with Digitizer Full Assembly

    About the product 1. Replacement LCD screen + touch screen digitizer assembly for Nokia G42 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    562,11 Kč

  • SP0580BL.jpg@adea4613d6982d4b83075d588aad14c0

    TFT LCD Screen for Nokia 6 TA-1000 TA-1003 TA-1021 TA-1025 TA-1033 TA-1039 with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 6. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    427,90 Kč

  • SPS0940.jpg@edebfef84bae048faaded2c99d62220b

    Charging Port Board for Nokia 7.1 / TA-1100 / TA-1097 / TA-1085 / TA-1095 / TA-1096

    1. Charging port board replacement for Nokia 7.1 / TA-1100 / TA-1097 / TA-1085 / TA-1095 / TA-1096. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    246,99 Kč

  • SP0345BL.jpg@312a2d19d0fee1619d9577248bb9ff15

    TFT LCD Screen for Nokia 8 / N8 TA-1012 TA-1004 TA-1052 with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 8 / N8 TA-1012 TA-1004 TA-1052. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    530,73 Kč

  • SP3139BL.jpg@f5e5d471d7cd7008f2002c6d78c974eb

    TFT LCD Screen for Nokia 4.2 with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 4.2. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    438,11 Kč

  • SPS3550LL.jpg@8d3c90cc2912b47dad52ac0c00d52fe3

    Battery Back Cover for Nokia 8.3 5G TA-1243 TA-1251(Blue)

    1. Back cover replacement for Nokia 8.3 5G TA-1243 TA-1251 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    365,90 Kč

  • SP1047BL.jpg@0834564bd54158f8eae70e1faecdec90

    Solid Color Plastic Battery Back Cover for Nokia 225 (Black)

    1. High quality back cover replacement for Nokia 225 2. Replace your broken or unworkable back cover with a new one 3. Each item has been checked and in good condition before shipping

    174,53 Kč

  • SPS0931.jpg@05d138e3e1bd223f107aebf8dd16e7db

    Charging Port Board for Nokia 7.2 / 6.2 / TA-1193 / TA-1178 / TA-1196 / TA-1181 / TA-1200 / TA-1198 / TA-1201 / TA-1187

    1. Charging port board replacement for Nokia 7.2 / 6.2 / TA-1193 / TA-1178 / TA-1196 / TA-1181 / TA-1200 / TA-1198 / TA-1201 / TA-1187. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    262,56 Kč

  • 10 PCS Back Housing Cover Adhesive for Nokia 8.3-garmade.com

    10 PCS Back Housing Cover Adhesive for Nokia 8.3

    1. Replacement back housing cover adhesive for Nokia 8.3. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    245,97 Kč

  • SP6276BL.jpg@2463fefadd46acba745cad483edd4a95

    TFT LCD Screen for Nokia 8.3 with Digitizer Full Assembly

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 8.3. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    672,85 Kč

  • SPS0936.jpg@a46cdfa7ba22733234ad8a450497d38b

    Charging Port Board for Nokia X6 / 6.1 Plus / TA-1099 / TA-1103 / TA-1083

    1. Charging port board replacement for Nokia X6 / 6.1 Plus / TA-1099 / TA-1103 / TA-1083. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    217,65 Kč

  • SPS0937.jpg@d38a56a0a325a6e9f918559f8eb30da2

    Charging Port Board for Nokia X7 / 8.1 / TA-1113 / TA-1115 / TA-1131 / TA-1119 / TA-1121 / TA-1128

    1. Charging port board replacement for Nokia X7 / 8.1 / TA-1113 / TA-1115 / TA-1131 / TA-1119 / TA-1121 / TA-1128. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    246,99 Kč

  • S-MPL-0918.jpg@93659c12cb1521c24273be5362f22c9e

    LCD Screen for Nokia 6500S/ 5700/ 5610/ 6110n/ 7373/ 6220c/ 6600s/ 6650 Big/ E65

    Before Installation Note1.Test before installation -When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. -Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. -Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2.Simulates testing -Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + battery + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it cant show, please contact us at the very first time. And please dont force it to be installed in mobile phone. Well not be responsible if the mobile phone is damaged during installation. 3.Do not over-bend cable -Please make sure LCD cable is not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan 2. Original top quality. 3. Complete fit and work 4. Supply quality warranty with professional service

    246,48 Kč

  • SPS7013L.jpg@20c5bfed5b8bd3e734f441e9f9ac6035

    For Nokia 8.3 SIM + SIM / Micro SD Card Tray (Blue)

    1. SIM card tray + SIM / Micro SD card tray replacement part. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    181,42 Kč

  • LCD Screen and Digitizer Full Assembly for Nokia G50 TA-1358 TA-1390 TA-1370 TA-1367 TA-1361(Black)-garmade.com

    LCD Screen and Digitizer Full Assembly for Nokia G50 TA-1358 TA-1390 TA-1370 TA-1367 TA-1361(Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia G50 TA-1358 TA-1390 TA-1370 TA-1367 TA-1361. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    493,99 Kč

  • LCD Screen and Digitizer Full Assembly For Nokia G21/G11-garmade.com

    LCD Screen and Digitizer Full Assembly For Nokia G21/G11

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia G21/G11. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    434,02 Kč

  • SPS3750BL.jpg@2af1a99f762736a831aa13bd67124ae3

    LCD Screen and Digitizer Full Assembly for Nokia 2.4 TA-1277 TA-1275 TA-1274 TA-1270(Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 2.4 TA-1277 TA-1275 TA-1274 TA-1270. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    438,87 Kč

  • SPS3754BL.jpg@23b5f2bfeef18fccfe22f11587dbcd29

    LCD Screen and Digitizer Full Assembly for Nokia X10 TA-1350 TA-1332(Black)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia X10 TA-1350 TA-1332. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    502,92 Kč

  • Charging Port Board for Nokia 3-garmade.com

    Charging Port Board for Nokia 3

    1. High quality charging port board replacement for Nokia 3. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    181,67 Kč

  • SP8352BL.jpg@859f4b985b31c9a53a73c9e1aacf076d

    Back Cover for Nokia 5.1 Plus (X5)(Black)

    1. High quality back cover replacement for Nokia 5.1 Plus (X5). 2. Replace your broken or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.

    196,47 Kč

  • Power Button Flex Cable for Nokia 7.1 / TA-1085-garmade.com

    Power Button Flex Cable for Nokia 7.1 / TA-1085

    1. Power button flex cable replacement for Nokia 7.1 / TA-1085. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    152,84 Kč

  • SPS0935.jpg@bf7a37b00937457290a131fc17928b75

    Charging Port Board for Nokia X5 / 5.1 Plus / TA-1120 / TA-1105 / TA-1102

    1. Charging port board replacement for Nokia X5 / 5.1 Plus / TA-1120 / TA-1105 / TA-1102. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    269,96 Kč

  • EDA006390404.jpg@dc1799da1913283b1bead827e1e111b5

    For Nokia G42 OEM LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. With frame LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Nokia:  G42 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    658,56 Kč

  • EDA005557201.jpg@271f6931b156813902fcc6bd542a7add

    For Nokia G22 OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

    144,93 Kč

  • SPS7001SL.jpg@905dedb791b7a1c092f04f7ff699a077

    For Nokia G60 Battery Back Cover(Silver)

    1. Battery back cover replacement part. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    313,59 Kč

  • SPS6888.jpg@699d1a6d9a5a086578c860b04703e032

    For Nokia C32 OEM LCD Screen with Digitizer Full Assembly

    About the product 1. Replacement LCD screen + touch screen digitizer assembly for Nokia C32 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    452,40 Kč

  • For Nokia 1110 / 1112 Full Housing Cover(Blue)-garmade.com

    For Nokia 1110 / 1112 Full Housing Cover(Blue)

    1. Battery back cover + front cover + keyboard replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.5. Completely fit and work.

    152,84 Kč

  • Original LCD Screen For Nokia G10 with Digitizer Full Assembly-garmade.com

    LCD Screen For Nokia G10 with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Nokia G10 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    456,99 Kč

  • Charging Port Board for Nokia G20-garmade.com

    Charging Port Board for Nokia G20

    1. Charging port board replacement for Nokia G20. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    196,98 Kč

  • Power Button & Volume Button Flex Cable for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325-garmade.com

    Power Button & Volume Button Flex Cable for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325

    1. Volume button & power button flex cable replacement for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    152,84 Kč

  • SPS2245BL.jpg@b321505109d8b01002aa9956f94a5f4a

    LCD Screen and Digitizer Full Assembly for Nokia 1.3 TA-1216 TA-1205(Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Nokia 1.3 TA-1216 TA-1205 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    438,11 Kč

  • SPS2247BL.jpg@cb2769a680fda1044d5af3336e41cdde

    LCD Screen and Digitizer Full Assembly for Nokia X20(Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Nokia X20 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    567,98 Kč

  • Small Fingerprint Sensor Flex Cable for Nokia 8 / N8 TA-1012 TA-1004 TA-1052 (Black)-garmade.com

    Small Fingerprint Sensor Flex Cable for Nokia 8 / N8 TA-1012 TA-1004 TA-1052 (Black)

    1. Small fingerprint sensor flex cable for Nokia 8 / N8 TA-1012 TA-1004 TA-1052. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    320,99 Kč

  • SPS1066HL.jpg@5583e530b44d5b51636cef0497dff266

    Battery Back Cover for Nokia 2.2 / TA-1183 / TA-1179 / TA-1191 / TA-1188(Grey)

    1. Back cover replacement for Nokia 2.2 / TA-1183 / TA-1179 / TA-1191 / TA-1188 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    224,03 Kč

  • SPS1073BL.jpg@2291b96a2dd44f0f2fd4c250ed327e74

    TFT LCD Screen for Nokia 3.4 with Digitizer Full Assembly (Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Nokia 3.4 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    474,85 Kč

  • USB Cover for Nokia N9(Blue)-garmade.com

    USB Cover for Nokia N9(Blue)

    About the product1. High quality USB Cover for Nokia N9 2. Replace your broken or unusable USB Cover with a new one 3. Each item has been checked and in good condition before shipping

    174,02 Kč

  • SIM Card Tray for Nokia N9(Black)-garmade.com

    SIM Card Tray for Nokia N9(Black)

    About the product1. Brand new and high quality SIM card tray for Nokia N9 2. This part is used to replace your damaged or lost SIM card tray tray, holding the SIM card. 3. Each item has been checked and in good condition before shipping

    212,04 Kč

  • SIM Card Tray for Nokia N9(Blue)-garmade.com

    SIM Card Tray for Nokia N9(Blue)

    About the product1. Brand new and high quality SIM card tray for Nokia N9 2. This part is used to replace your damaged or lost SIM card tray tray, holding the SIM card. 3. Each item has been checked and in good condition before shipping

    209,74 Kč

  • SP1424BL.jpg@03c012c51da51f918623ccc8a6fc011c

    LCD Screen + Touch Panel for Nokia 3 TA-1020 TA-1028 TA-1032 TA-1038(Black)

    About the product1. Replacement LCD display + touch screen digitizer assembly for Nokia 3 TA-1020 TA-1028 TA-1032 TA-1038. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    415,14 Kč

  • Fingerprint Sensor Flex Cable for Nokia 7.1 / TA-1085 (Black)-garmade.com

    Fingerprint Sensor Flex Cable for Nokia 7.1 / TA-1085 (Black)

    1. Fingerprint sensor flex cable for Nokia 7.1 / TA-1085. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    245,97 Kč

  • Charging Port Board for Nokia 3.1 Plus-garmade.com

    Charging Port Board for Nokia 3.1 Plus

    1. Charging port board replacement for Nokia 3.1 Plus. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    160,75 Kč

  • SP4858LL.jpg@898355e03f485e882e899cc7e802237f

    Battery Back Cover with Side Keys for Nokia 3.1 Plus(Blue)

    1. Back cover replacement for Nokia 3.1 Plus 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    314,10 Kč

  • SP4928BL.jpg@339b1e970b1b2f83668a17ca9d913a38

    Battery Back Cover for Nokia 7.1 / TA-1100 TA-1096 TA-1095 TA-1085 TA-1097(Black)

    1. Back cover replacement for Nokia 7.1 / TA-1100 TA-1096 TA-1095 TA-1085 TA-1097 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    279,65 Kč

Login

Forgot your password?

Don't have an account yet?
Create account