5A Constant Current Constant Voltage LED Drive Adjustable Power Supply Lithium Ion Battery Charging Current Voltage Meter

Description


How to charge the battery:
1. Determine the float voltage and charging current of the rechargeable battery, the input voltage of the module;
2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.
3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined charging current value;
4. The charge-to-light current is shipped by default at 0.1 times the charge current (constant current value).
5. Adjust the constant voltage position device to make the output voltage reach the float voltage; connect the battery and try to charge.
(1, 2, 3, 4, 5 steps are the module input power supply, the output is not connected to the battery.)

LED constant current drive How to use:
1. Determine the operating current and maximum operating voltage at which you need to drive the LEDs;
2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.
3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined LED operating current;
4. Adjust the constant voltage positioner to make the output voltage reach the maximum working voltage of the LED;
5. Connect the LED and test the machine. (1, 2, 3, 4 steps are connected to the power supply of the module, and the output is not connected to the LED light.)

Description of the communication protocol:
1. This module has the function of communicating with the computer, which can facilitate the computer to read the module current and voltage data.
2. Since the output of this module is TTL level, it is necessary to realize communication with the computer, and also convert this level back to the RS232 which can be recognized by the computer. Level, you need to use this cp2102 usb to TTL module to achieve conversion.
3. The communication protocol is as follows: Baud rate: 9600 Bps
- BB CC ADDR 00 XX XX CRC (current return command)
- BB CC ADDR 01 XX XX CRC (voltage return command)
- Where BB CC is the frame header (2 bytes)
- ADDR is the module address (1 byte)
- 00 is the read current command (1 byte)
- 01 is the read voltage command (1 byte)
- XX XX any value (2 bytes)
- CRC CRC check (1 byte)

Instrument properties:
1. Refresh rate: About 200ms once
2. Display mode: Double four-digit 0.28'' digital tube
3. Measurement Accuracy: 0.1%
4. Current range: 0-5A, voltage range 5V-30V
5. Working current: Less than 15mA
6. Display color: Red
7. Input impedance: 50 milliohms
8. Storage temperature: -10 degrees Celsius to 50 degrees Celsius
9. Product size: 51mm x 26.3 mm x 10mm

5A Constant Current Constant Voltage LED Drive Adjustable Power Supply Lithium Ion Battery Charging Current Voltage Meter

Product form

SKU: TBD04227426

  • In stock (Processing Time 1 - 72 hours)

€10,45

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    How to charge the battery:
    1. Determine the float voltage and charging current of the rechargeable battery, the input voltage of the module;
    2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.
    3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined charging current value;
    4. The charge-to-light current is shipped by default at 0.1 times the charge current (constant current value).
    5. Adjust the constant voltage position device to make the output voltage reach the float voltage; connect the battery and try to charge.
    (1, 2, 3, 4, 5 steps are the module input power supply, the output is not connected to the battery.)

    LED constant current drive How to use:
    1. Determine the operating current and maximum operating voltage at which you need to drive the LEDs;
    2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.
    3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined LED operating current;
    4. Adjust the constant voltage positioner to make the output voltage reach the maximum working voltage of the LED;
    5. Connect the LED and test the machine. (1, 2, 3, 4 steps are connected to the power supply of the module, and the output is not connected to the LED light.)

    Description of the communication protocol:
    1. This module has the function of communicating with the computer, which can facilitate the computer to read the module current and voltage data.
    2. Since the output of this module is TTL level, it is necessary to realize communication with the computer, and also convert this level back to the RS232 which can be recognized by the computer. Level, you need to use this cp2102 usb to TTL module to achieve conversion.
    3. The communication protocol is as follows: Baud rate: 9600 Bps
    - BB CC ADDR 00 XX XX CRC (current return command)
    - BB CC ADDR 01 XX XX CRC (voltage return command)
    - Where BB CC is the frame header (2 bytes)
    - ADDR is the module address (1 byte)
    - 00 is the read current command (1 byte)
    - 01 is the read voltage command (1 byte)
    - XX XX any value (2 bytes)
    - CRC CRC check (1 byte)

    Instrument properties:
    1. Refresh rate: About 200ms once
    2. Display mode: Double four-digit 0.28'' digital tube
    3. Measurement Accuracy: 0.1%
    4. Current range: 0-5A, voltage range 5V-30V
    5. Working current: Less than 15mA
    6. Display color: Red
    7. Input impedance: 50 milliohms
    8. Storage temperature: -10 degrees Celsius to 50 degrees Celsius
    9. Product size: 51mm x 26.3 mm x 10mm

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account