3M 1201 KN95 Dustproof Antivirus Head-mounted Mask Kits with Breathing Valve

Description

1. Protect every inch of life in all aspects. It is suitable for respiratory protection of paints, paints, laboratories, chemical plants, decoration, pesticide spraying, mining and other organic gases and fine particles.
2. 3301CN filter box: protection of organic gases and steam, such as benzene and its homologues, gasoline, carbon dioxide and so on. The unique filtration route design makes the adsorption effect better. The world's selection of coconut shell activated carbon, longer life, in line with LA certification.
3. 3N11 filter cotton cover: high-efficiency electrostatic fiber filter material, strong adsorption capacity, suitable for protection of any non-oily particulate matter, in line with GB2890-2009P1 standard.
4.1200 half mask: TPE material, comfortable to wear, safe and odor-free, healthy and environmentally friendly. Only 53 grams, suitable for long-term use. The snap-on design facilitates the installation and removal of the filter cartridge. The unique exhalation valve has a large opening range, exhales hot and humid breath, makes the air inside the mask fresher and exhales smoothly, and can adjust the head frame to be elastic, safe and reliable, and provide comfortable wearing.

Instructions for use:
1. If the respirator is damaged, immediately leave the contaminated area and repair or replace the respirator.
2. If the respiratory resistance is found to increase significantly, the particulate filter should be replaced.
3. If you have tasted or smelled gas or vapor during use, or have a irritating sensation, replace the filter cartridge immediately.

Maintenance / cleaning:
1. Remove the filter material and valve plate before cleaning. The filter material cannot be cleaned.
2. Clean the mask with warm water or medium water, use a soft brush to remove dirt, rinse and air dry.
3. Check that the parts are intact.
4. Replace the filter media if needed.
5. Reassemble the mask

Save / Lose:
1. The mask should be stored away from powder chemicals, sunlight, extreme temperatures and excessive moisture. Avoid physical damage or deformation when storing the mask.
2. Used respirators should be disposed of in accordance with local laws and regulations. Incorrect disposal of used canisters, filter cotton, or masks contaminated with hazardous materials can cause environmental hazards.

Recommended storage conditions:
1200 half mask: temperature -10-50 degrees Celsius, relative humidity below 90%, storage life: 5 years from the date of manufacture.
3301CN filter box: temperature 10-30 degrees Celsius, relative humidity less than 70%, storage life: 3 years from the date of production.
3. 3N11 filter cotton cover: temperature -20-30 ?° C degrees Celsius, relative humidity below 85 percent, storage life: 3 years from the date of manufacture.


Specification:
Package Weight
One Package Weight 0.29kgs / 0.64lb
One Package Size 30cm * 20cm * 20cm / 11.81inch * 7.87inch * 7.87inch
Qty per Carton 12
Carton Weight 4.40kgs / 9.70lb
Carton Size 62cm * 42cm * 62cm / 24.41inch * 16.54inch * 24.41inch
Loading Container 20GP: 165 cartons * 12 pcs = 1980 pcs
40HQ: 383 cartons * 12 pcs = 4596 pcs

3M 1201 KN95 Dustproof Antivirus Head-mounted Mask Kits with Breathing Valve

Product form

SKU: HC9225

  • In stock (Processing Time 1 - 72 hours)

£14.00

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    1. Protect every inch of life in all aspects. It is suitable for respiratory protection of paints, paints, laboratories, chemical plants, decoration, pesticide spraying, mining and other organic gases and fine particles.
    2. 3301CN filter box: protection of organic gases and steam, such as benzene and its homologues, gasoline, carbon dioxide and so on. The unique filtration route design makes the adsorption effect better. The world's selection of coconut shell activated carbon, longer life, in line with LA certification.
    3. 3N11 filter cotton cover: high-efficiency electrostatic fiber filter material, strong adsorption capacity, suitable for protection of any non-oily particulate matter, in line with GB2890-2009P1 standard.
    4.1200 half mask: TPE material, comfortable to wear, safe and odor-free, healthy and environmentally friendly. Only 53 grams, suitable for long-term use. The snap-on design facilitates the installation and removal of the filter cartridge. The unique exhalation valve has a large opening range, exhales hot and humid breath, makes the air inside the mask fresher and exhales smoothly, and can adjust the head frame to be elastic, safe and reliable, and provide comfortable wearing.

    Instructions for use:
    1. If the respirator is damaged, immediately leave the contaminated area and repair or replace the respirator.
    2. If the respiratory resistance is found to increase significantly, the particulate filter should be replaced.
    3. If you have tasted or smelled gas or vapor during use, or have a irritating sensation, replace the filter cartridge immediately.

    Maintenance / cleaning:
    1. Remove the filter material and valve plate before cleaning. The filter material cannot be cleaned.
    2. Clean the mask with warm water or medium water, use a soft brush to remove dirt, rinse and air dry.
    3. Check that the parts are intact.
    4. Replace the filter media if needed.
    5. Reassemble the mask

    Save / Lose:
    1. The mask should be stored away from powder chemicals, sunlight, extreme temperatures and excessive moisture. Avoid physical damage or deformation when storing the mask.
    2. Used respirators should be disposed of in accordance with local laws and regulations. Incorrect disposal of used canisters, filter cotton, or masks contaminated with hazardous materials can cause environmental hazards.

    Recommended storage conditions:
    1200 half mask: temperature -10-50 degrees Celsius, relative humidity below 90%, storage life: 5 years from the date of manufacture.
    3301CN filter box: temperature 10-30 degrees Celsius, relative humidity less than 70%, storage life: 3 years from the date of production.
    3. 3N11 filter cotton cover: temperature -20-30 ?° C degrees Celsius, relative humidity below 85 percent, storage life: 3 years from the date of manufacture.


    Specification:
    Package Weight
    One Package Weight 0.29kgs / 0.64lb
    One Package Size 30cm * 20cm * 20cm / 11.81inch * 7.87inch * 7.87inch
    Qty per Carton 12
    Carton Weight 4.40kgs / 9.70lb
    Carton Size 62cm * 42cm * 62cm / 24.41inch * 16.54inch * 24.41inch
    Loading Container 20GP: 165 cartons * 12 pcs = 1980 pcs
    40HQ: 383 cartons * 12 pcs = 4596 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account