Waveshare CAN FD Protocol Converter CAN FD To RS232/RS485 Bidirectional Data Communication


1. The CAN FD to RS232/RS485 converter is a DIN-rail mountable device designed for bidirectional data conversion between CAN FD and RS232/RS485 interfaces. It features high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—enabling interconnection between CAN and serial devices, while remaining compatible with CAN FD and CAN 2.0A/2.0B protocols.
2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide input voltage range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.
3. The device supports configuration via host software and features a built-in 120Ω bus resistor (selectable via DIP switch). Designed for DIN-rail mounting, it offers convenient configuration and efficient installation.

Basic Parameters:
1. Operating Voltage: DC 9V–36V
2. Dimensions: 110 × 27 × 85.6 mm
3. Mounting Method: DIN-rail mounting
4. Reload Button: Long press to restore factory settings
5. Indicators: POWER, WORK, COM, and CAN

Interface Parameters:
1. CAN Port Specifications: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B
2. CAN Port Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps
3. Termination Resistors: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel
4. Serial Port Specifications: Supports one RS485 or RS232 connection

Software Functions:
1. Modbus Gateway: CAN FD to Modbus RTU (Master/Slave)
2. Transmit Messages: Supports configuration of up to 64 transmit messages
3. Receive Messages: Supports configuration of up to 64 receive messages
4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion
5. CAN ID: Supports standard frames and extended frames
6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)
7. Conversion Direction: Supports bidirectional conversion, serial-to-CAN only, and CAN-to-serial only
8. Firmware Upgrade: Supports firmware upgrades via host PC software
9. Parameter Configuration: AT commands or host PC software configuration

Protection Parameters:
1. ESD Protection: Air discharge 8 kV, contact discharge 6 kV
2. Electrical Fast Transient (EFT): Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV
3. Surge immunity test: Power supply circuit—differential mode 1 kV, common mode 2 kV; CAN circuit—common mode 2 kV.


Specification:
Package Weight
One Package Weight 0.15kgs / 0.34lb
One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch
Qty per Carton 54
Carton Weight 9.20kgs / 20.28lb
Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch
Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs
40HQ: 1316 cartons * 54 pcs = 71064 pcs

Waveshare CAN FD Protocol Converter CAN FD To RS232/RS485 Bidirectional Data Communication

Product form

SKU: TBD06070212

  • In stock (Processing Time 1 - 72 hours)

£63.75

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. The CAN FD to RS232/RS485 converter is a DIN-rail mountable device designed for bidirectional data conversion between CAN FD and RS232/RS485 interfaces. It features high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—enabling interconnection between CAN and serial devices, while remaining compatible with CAN FD and CAN 2.0A/2.0B protocols.
    2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide input voltage range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.
    3. The device supports configuration via host software and features a built-in 120Ω bus resistor (selectable via DIP switch). Designed for DIN-rail mounting, it offers convenient configuration and efficient installation.

    Basic Parameters:
    1. Operating Voltage: DC 9V–36V
    2. Dimensions: 110 × 27 × 85.6 mm
    3. Mounting Method: DIN-rail mounting
    4. Reload Button: Long press to restore factory settings
    5. Indicators: POWER, WORK, COM, and CAN

    Interface Parameters:
    1. CAN Port Specifications: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B
    2. CAN Port Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps
    3. Termination Resistors: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel
    4. Serial Port Specifications: Supports one RS485 or RS232 connection

    Software Functions:
    1. Modbus Gateway: CAN FD to Modbus RTU (Master/Slave)
    2. Transmit Messages: Supports configuration of up to 64 transmit messages
    3. Receive Messages: Supports configuration of up to 64 receive messages
    4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion
    5. CAN ID: Supports standard frames and extended frames
    6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)
    7. Conversion Direction: Supports bidirectional conversion, serial-to-CAN only, and CAN-to-serial only
    8. Firmware Upgrade: Supports firmware upgrades via host PC software
    9. Parameter Configuration: AT commands or host PC software configuration

    Protection Parameters:
    1. ESD Protection: Air discharge 8 kV, contact discharge 6 kV
    2. Electrical Fast Transient (EFT): Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV
    3. Surge immunity test: Power supply circuit—differential mode 1 kV, common mode 2 kV; CAN circuit—common mode 2 kV.


    Specification:
    Package Weight
    One Package Weight 0.15kgs / 0.34lb
    One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch
    Qty per Carton 54
    Carton Weight 9.20kgs / 20.28lb
    Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch
    Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs
    40HQ: 1316 cartons * 54 pcs = 71064 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account