DJI & GoPro Accessories

1. PD+QC3.0 fast charging port, supports simultaneous charging of UAV and remote control, bi-directional output design, charging fast enough, can get rid of low battery anxiety2. Pure copper contacts, anti-scratch and anti-oxidation, better electrical conductivity, pure copper contact shrapnel, safe and worry-free3. Universal interface, intelligent identification switching, compatible with a variety of mainstream flash charging protocols in the market, universal for Apple and Android phones, suitable for mainstream 12V 24V mainstream models in the market4. Material: ABS+ aluminum alloy5. Input voltage: DC 12V-24V6. Output voltage: DC 5V7. Compatible products: for DJI MAVIC 3/MINI 28. PD output: 5V 5A/9V 5A/12V 5A/15V 5A/20V 5A9. USB output: 5V 3A/9V 2A/12V 1.5A10. Working temperature: 0-55 degrees Celsius11. Mavic 3 charging time: about 95 minutes when the car charger works at 24V 2.5A; about 95 minutes when it works at 12V 5A12. Mini 2 charging time: about 90 minutes when the car charger is working at 24V 1.2A13. Packing list: charger x1, data cable x1 (excluding drone and remote control)14. Dimensions: about 7 x 4.2 x 2.8cm15. Weight: about 43g

Read more less

1. Material: EVA+ waterproof nylon fabric2. Compatible with DJI ACTION 23. Equipped with a carabiner hook, which can be lifted and hung4. The width is moderate, it is not easy to be off-line, and the service life is long5. Easy to carry when going out6. Simple and elegant appearance, large capacity7. Weight: 167 grams8. Dimensions: 13x6.5x20 cm9. Note: Only the bag is sold, others are not included

Read more less

1. The design of the translucent protective cover makes it easy to observe the protection status of the gimbal at any time 2. Not afraid of bending, spring back in seconds, the protective cover of the gimbal is made of PVC material with toughness, which can be bent to a certain extent and is not easy to deform 3. Four obstacle avoidance protection gimbal, lens, sensor, etc., integrated protection design, anti-knock, anti-scratch, anti-dust 4. Filter storage protection, the protective cover buckle does not affect the storage of various types of filters, and the filter can be removed 5. Snap-on design, one step in place 6. Effective protection Portable storage, all-round effective protection of the tip of the propeller, preventing the intricateness of the propeller blade, easy to store, not easy to bend 7. The product is molded with precision molds, combined with the fuselage design to effectively protect the front and rear propellers. At the same time, it is equipped with the gimbal camera protection cover for double protection to prevent the gimbal from being scratched and the propellers from being bent 8. Applicable models: suitable for DJI Mini 3 Pro 9. Material: PVC 10. Note: The product does not contain UAV Others 11. Dimensions: Lens cover: 7x6.6x5.5cm 12. Net weight: lens cap: 10.8g, propeller: 10.2g 13. Gross weight: lens cap: 52.7g, propeller: 40.4g Propeller installation steps: 1. Align the front propellers first, then snap the propellers into the drone, press on the air vent of the fuselage, and the installation is complete when you hear the sound of "Tata" 2. Align the rear blades, then snap the blades into the drone, press the bottom notch, and the installation is complete when you hear the sound of the tower 3. On the basis of the protection of the propeller, install the gimbal camera protection cover, and now snap its top into the groove 4. Then snap the protective cover of the gimbal camera into the bottom of the fuselage, and the installation is complete Steps to disassemble the propeller: 1. Pull the left and right sides of the oar restraint outward, and you can disassemble when you hear the sound of tata 2. Push down the paddle restrainer in the bottom notch to remove it 3. Take out the buckle at the bottom of the protective cover of the gimbal and camera upwards, and then it can be disassembled

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. Small size, light weight, high fire performance, and the power can be marked2. The fabric is PVC flame-retardant cloth, adjustable switch, and the lining is fire-resistant cloth3. Applicable models: suitable for DJI Mini 3 Pro4. Note: The product only includes the bag, not including batteries and other items5. Material: fireproof cloth6. Size: 1 battery: 6x4.3x8.3cm, 2 batteries: 9x4.3x8.8cm, 3 batteries: 11x4.3x8cm7. Weight: 1 battery: 25.5g, 2 batteries: 38.9g, 3 batteries: 46.6g

Read more less

1. The tripod is made of plastic material, which can be folded. It is strong and wear-resistant, and it is also convenient to carry and store when going out.2. The net weight of the buoyancy rod set is 28.6g, which does not affect the flight speed and does not cause flight burden3. The buoyancy rod set effectively increases the height by 7.3cm, effectively protecting the vision below and the infrared obstacle avoidance system4. Applicable models: suitable for DJI Mini 2 (note: drones are not included)5. Product size: 20 x 21.6 x 9cm6. Weight: 28.6 grams

Read more less

1. Adopt optical tempered glass with a hardness of 9H, anti-scratch, anti-drop, and dust-proof, effectively protect the camera lens, avoid the camera from being scratched and scratched, without fear of scratching 2. The light transmittance of the lens material is close to 92%, and the AR coating layer is applied to increase the light transmittance of the lens to more than 98%. 3. The lens is coated with a waterproof film layer, and the dripping angle reaches 115 degrees, and no water droplets remain on the lens surface to affect the shooting effect 4. Adhesive arrangement is adopted, easy to install and disassemble 5. This protective mirror can be used with the metal frame on the market at the same time 6. Applicable models: Suitable for Insta360 X3 Precautions: 1. Please make sure the lens used for the camera is clean and dry before use. 2. After removing the X3 lens guard, apply new adhesive before putting it back on the X3. 3. The lens guard of the X3 is splash-proof, but not designed for underwater use. Please use a diving suit for underwater shooting. 4. To remove the X3 lens guard, use the provided pry tool. Be careful not to scratch the lens when removing the lens hood.

Read more less

1. Lightweight design, small size, will not affect the normal flight of the aircraft2. When flying at night, it is used as a signal light and plays a warning role3. Alternately flashing red and blue colors, high brightness, giving you a different visual effect4. Easy to install and paste, no additional tools required5. Universal style, suitable for any model6. Working hours: about 10 hours7. Power supply: built-in button battery for power supply8. Product weight: about 5g9. Dimensions: about 50 x 50 x 23mm10. Note: only the light and the back glue will be shipped, no other

Read more less

1. Material: carbon fiber2. For DJI Mavic Mini 3Pro3. Open the mold on the real machine without affecting the flight4. The blades are made of high-strength carbon fiber, light and weightless, and full of power after installation5. The installation is stable, firmly fastened, the original screw and the opening method of the blade6. Confirm that the propeller can be unfolded before installation7. Note: Too tight propellers will cause the drone to vibrate and make loud noises when starting8. Size: 7.5x1.5x0.5 cm

Read more less

Features1. ND filter specially designed for MAVIC 3 Pro drone 2. The ND filter can prevent excessive exposure and make the picture have appropriate motion blur. The luminosity changes continuously with the rotation of the lens, making the picture more comfortable and smooth 3. The multi-layer coating light reduction process is adopted to restore the truest color 4. Snap-type quick disassembly design, the original lens will not be damaged during installation; 5. The single weight of the filter is only 6.2G, high-precision adaptation, will not affect the flight performancePackage List1. ND8 x 1 2. ND16 x 1 3. ND32 x 1 4. ND64 x 1 5. Cleaning cloth x 1

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. The UV filter specially designed for the MAVIC 3 Pro UAV. The UV mirror can prevent the lens surface coating from directly contacting the external environment and play a protective role. 2. The aluminum alloy frame + AGC optical glass restores the most authentic colors 3. Waterproof and oil-proof, tempered and anti-scratch, lotus flower waterproof effect, easy to clean without leaving traces 4. Snap-on quick disassembly design, the original lens will not be damaged during installation 5. The single weight of the filter is only 6.2G, high-precision adaptation, will not affect the flight performance 6. Frame: Matte black 7. Material: Aluminum alloy + AGC optical glass 8. Size: 4.8 x 4.8 x 0.6cm

Read more less

1. This case needs to be used with the waterproof case (not included), not directly on the camera2. For Insta360 X3 action camera (camera and waterproof case not included)3. Tightly and seamlessly combined with the camera housing, providing strong protection for diving and the camera.4. Made of environmentally friendly silicone material, scratch-resistant, soft and durable.5. Easy to install and remove.6. Dimensions: about 70 x 69mmPackage includes:1x Silicone protective case

Read more less

1. Material: carbon fiber2. For DJI Mavic Mini 3Pro3. Open the mold on the real machine without affecting the flight4. The blades are made of high-strength carbon fiber, light and weightless, and full of power after installation5. The installation is stable, firmly fastened, the original screw and the opening method of the blade6. Confirm that the propeller can be unfolded before installation7. Note: Too tight propellers will cause the drone to vibrate and make loud noises when starting8. Size: 7.5x1.5x0.5 cm

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. Specially designed for DJI MAVIC 3 PRO, precise mold opening, small size and large capacity, can accommodate RC PRO remote control with screen + 3 batteries + aircraft + charging butler + 100W charger + other small accessories; 2. High-quality PU leather fabric, exquisite appearance and upgraded taste; 3. Two-way zipper, smooth and not stuck; 4. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant; 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure 6. Size: 34.8 x 32.8 x 12.2cm

Read more less

1. Compatible models: for DJI Mavic Air 22. Material: plastic/plastic, nylon3. Fit the remote control, firm and strong4. Firm buckle, more flexible to use5. Adjustment ring design, the length can be adjusted freely6. Nylon rope material, flexible and wear-resistant7. The clip is made of EVA cotton to prevent the remote control and mobile phone from being scratched8. Adopt 1/4 screw port, quick disassembly, easy to operate9. Adjustable length: 82-131 cm10. Front foot frame size: 6.6 x 1.9 x 3.3 cm11. Product net weight: 63.7 grams12. Note: Only the lanyard will be shipped, nothing else!

Read more less

1. 3 meters long, large drone effect, 8-segment telescopic, flexible viewfinder, help you solve the problem that the angle is too narrow and there is no sense of depth.2. Made of high-quality carbon fiber, high strength, 1/3 lighter than aluminum selfie sticks of the same size.3. The handle is wrapped with food-grade silicone, which has a non-slip texture, allowing you to have a comfortable experience every time you use it.4. After bearing the load, it can return to its original shape without deformation even after long-term use.5. The 1/4 threaded hole at the bottom of the selfie stick is used to connect to the tripod base.6. Only 44 cm after storage, no pressure to carry when going out7. Wide range of adaptation: suitable for Gopro, Insta360, DJI, other sports cameras, smart phones.Product parameters:1. Size: 44-300cm2. Weight: 374g3. Material: 24T carbon cloth, aluminum alloy, siliconePrecautions:1. Do not use selfie sticks during thunderstorms2. Do not touch the power supply with the selfie stick3. When storing the selfie stick, please use the rotating storage method4. Do not mount heavy objects exceeding 0.3kg.

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. Compatible models: for DJI Action 22. Material: nylon, velvet, EVA3. Compartment storage, shock absorption and anti-scratch4. Light gray flocking on the surface, all-round protection of the machine, beautiful and practical5. Durable and wear-resistant, comfortable to the touch, with a handle, easy to carry6. Suede loose-leaf layer design, the fabric is soft, preventing the items stored in the mesh bag from scratching the lower products7. Exquisite and neat stitching + two-way zipper, smooth and durable8. Product size: 23.5 x 7 x 18 cm9. Product net weight: 358 grams10. Note: Only the storage bag will be sent for delivery, nothing else!

Read more less

1. Nylon material, soft and comfortable, smooth surface, long-term wearing2. Environmentally friendly copper screws, exquisite and durable3. Adjustable buckle, adjust the length according to your needs4. After using the lanyard, you can avoid the trouble of grabbing the remote control when flying, and you can also let go of your hands when resting, making it more convenient to carry.5. Applicable models: suitable for DJI remote control with screen (note: the remote control is not included)6. Material: nylon/nylon+mesh7. Product size: thin 72-134cm, thick 61.5-81cm8. Weight: Thin 38.4g, thick 68.7g

Read more less

1. Material: Nylon, EVA+PU shell2. For DJI Mini 3 Pro3. Two-way zipper, smooth opening and closing, not easy to rust4. Suitable for placing a full set of fuselage to meet storage needs5. The velvet fabric is soft and does not hurt the equipment, the EVA sheet is shock-resistant and compressive, and the PU leather is waterproof and splash-proof6. Stop the splashing of rainwater in a short time and avoid getting the contents of the bag wet7. Large-capacity elastic net pocket can accommodate more accessories8. Extended handle, more comfortable to hold9. Lycra fabric, shock-absorbing protective equipment10. Weight: 800 grams11. Dimensions: 33x29x9 cm

Read more less

1. Compatible models: Compatible with DJI OSMO Pocket 22. Material: plastic3. Rubber pad + universal 1/4 screw design, effectively avoiding scratches on accessories, and convenient connection4. The rubber pad design at the bottom of the tripod increases friction and is stable and does not slip5. Non-slip handle design, comfortable grip, stable and reliable6. Dimensions: 3 x 3 x 8 cm7. Product net weight: 31.83 grams8. Note: Only the tripod will be shipped, nothing else!

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. Nylon material, soft and comfortable, smooth surface, long-term wearing2. Environmentally friendly copper screws, exquisite and durable3. Adjustable buckle, adjust the length according to your needs4. After using the lanyard, you can avoid the trouble of grabbing the remote control when flying, and you can also let go of your hands when resting, making it more convenient to carry.5. Applicable models: suitable for DJI remote control with screen (note: the remote control is not included)6. Material: nylon/nylon+mesh7. Product size: thin 72-134cm, thick 61.5-81cm8. Weight: Thin 38.4g, thick 68.7g

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. Use this kit to turn your drone into a camera in seconds, and take pictures anytime, anywhere2. Free hands, stable shooting, does not affect the remote control button operation3. Silicone material, fixed drone is not easy to damage the machine4. Applicable models: suitable for DJI Mini 3 Pro RC remote control with screen5. Material: Silicone+PC+Nylon6. Kit 1 without lanyard, Kit 2 with lanyard

Read more less

1. Specially designed for DJI Mavic 2/ Air 2/Mavic Pro/Fimi X8SE/Autel EVO 2 advertising display. Lightweight design, will not increase the burden on the drone.2. Equipped with a powerful battery, it can work for 12-24 hours after fully charged.3. Small and portable, suitable for various confession scenes (such as weddings, parties, confessions, performances, advertisements, etc.)4. Support the connection with the mobile phone via Bluetooth, and directly set and control the graphic information displayed on the screen through the mobile phone or computer.5. Display 7 languages including English, Chinese, Traditional Chinese, Russian, Korean, Hindi, and Japanese.Parameter:1. Material: ABS+PLA2. Dimensions: 93 x 30 x 6mm (length x width x thickness)3. Charging: 2-3 hours4. Built-in battery: 250MAH5. Bluetooth distance: 15m in open space6. Language: English, Chinese, Traditional Chinese, Russian, Korean, Hindi, Japanese, etc.7. Display: snow drift, press and hold, move left, move right, move up, move down, flashing;8. The LED display supports 8 text messages or 8 graphic messages, and the software has a variety of animation icons for you to choose from;Product List:LED display × 1Plastic accessories × 1Fixing bracket × 1Charging cable × 11/4 screw x 1Universal Buckle x 1

Read more less

1. Use this kit to turn your drone into a camera in seconds, and take pictures anytime, anywhere2. Free hands, stable shooting, does not affect the remote control button operation3. Silicone material, fixed drone is not easy to damage the machine4. Applicable models: suitable for DJI Mini 3 Pro RC remote control with screen5. Material: Silicone+PC+Nylon6. Kit 1 without lanyard, Kit 2 with lanyard

Read more less

1. Specially designed for GoPro HERO series cameras, equipped with high-strength and durable transparent extension rods, capturing unique shooting angles and stable images2. When shooting at a 180-degree angle, the unique transparent design can make it disappear in photos and videos.3. Freshwater and saltwater waterproof, it can be filmed at a depth of 60 meters underwater, making it an excellent choice for water sports and diving enthusiasts.4. Retractable, the selfie stick has a card slot that can hold the remote control, and it can also be disassembled5. Size: 62cm-36cm6. Weight: 221G with packaging

Read more less

1. Made of high quality metal material, durable and useful. 2. Light weight and small size, it is convenient to carry and use. 3. CNC machining aluminum production. 4. Clamp design allows for a multitude of mounting positions and angles. 5. Strong clip to support 1.6-4.2cm range of caliber handlebars or bars.

Read more less

1. Powerful clamp adopts high quality plastic, bracket link rod is aluminum alloy material, strong and durable; 2. Modular design, easy to install and disassemble; 3. Strong clip to support 1.6-4.2cm range of caliber handlebars or bars; 4. Bracket universal ball head design, can adjust a variety of shooting angles; 5. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.; Can also be used to link the installation of vehicle navigation Note: Only the dual-heads Crab Clamp

Read more less

1. Material: plastic2. Working time: double flash about 3 hours, single flash about 6 hours3. Battery capacity: 380mAh4. Full charge time: 80min5. Visible distance at night: 4-5km6. Working power: 10W7. Dimensions: about 4 x 2 x 1.1cm8. Weight: about 18.8gFeatures:1. Not easy to degumming, no glue residue, safe and stable, strong adhesion2. Seven colors: white, red, yellow, green, purple, blue and pink for your choice3. 10W high-power strobe light, visible thousands of meters Power display: when the switch is pressed, the red light flashes twice for power, and the red light flashes for 10 seconds for low power4. With charging indicator light: the red light flashes quickly to indicate charging, and the red light goes off to indicate that the charging is complete5. Anti-collision: make your drone visible when cruising at night, easy to avoid obstacles, avoid destroying the drone6. Powered by an extra rechargeable battery (built-in), long working time7. Light weight, no extra power consumption8. Note: the delivery does not include the drone in the picture

Read more less

Crab Clamps1. Powerful clamp adopts high quality plastic, bracket link rod is aluminum alloy material, strong and durable; 2. Modular design, easy to install and disassemble; 3. Strong clip to support 1.6-4.2cm range of caliber handlebars or bars; 4. Bracket universal ball head design, can adjust a variety of shooting angles; 5. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.; Can also be used to link the installation of vehicle navigationSelfie Stick1. The material is aluminum alloy, thickened tube body design, strong bearing capacity; 2. The main body is a 5-section telescopic rod, the height after contraction is 28cm, and the maximum height after extension is 112cm; 3. The whole tube body adopts anodizing process, rubber anti-skid and anti-skid handle design, anti-skid and sweat-proof, taking into account the quality and appearance, and feels comfortable to hold; 4. The base has a 1/4 screw hole, which can be connected to a triangular clip or an extension rod, and the top is a 1/4 screw, which can be connected to a camera, mobile phone clip or adapter, etc.; 5. With a panoramic camera such as Insta360, you can easily take a 360-degree panoramic blockbuster and freeze the beautiful moment at any time;

Read more less

Crab Clamps1. Powerful clamp adopts high quality plastic, bracket link rod is aluminum alloy material, strong and durable; 2. Modular design, easy to install and disassemble; 3. Strong clip to support 1.6-4.2cm range of caliber handlebars or bars; 4. Bracket universal ball head design, can adjust a variety of shooting angles; 5. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.; Can also be used to link the installation of vehicle navigationSelfie Stick1. The material is aluminum alloy, thickened tube body design, strong bearing capacity; 2. The main body is a 5-section telescopic rod, the height after contraction is 28cm, and the maximum height after extension is 112cm; 3. The whole tube body adopts anodizing process, rubber anti-skid and anti-skid handle design, anti-skid and sweat-proof, taking into account the quality and appearance, and feels comfortable to hold; 4. The base has a 1/4 screw hole, which can be connected to a triangular clip or an extension rod, and the top is a 1/4 screw, which can be connected to a camera, mobile phone clip or adapter, etc.; 5. With a panoramic camera such as Insta360, you can easily take a 360-degree panoramic blockbuster and freeze the beautiful moment at any time;

Read more less

1. Portable handheld, easy to travel with2. Nylon fabric, waterproof and wear-resistant, durable3. Soft lining, protect the head and its accessories from infringement4. Material: nylon + flocking + EVA5. Applicable products: for DJI Osmo Pocket 26. Size: about 18.5 x 23.5 x 6.4cm7. Net weight: about 300g8. Note: shipping does not include the head in the picture

Read more less

1. Flexible installation, easy to bend. Can shoot anywhere, 360-degree adjustment2. Built-in soft but strong aluminum strips help you mount to different objects flexibly.3. Flexible and changeable, it can be transformed into an octopus stand, a selfie stick, a desktop stand, or even a neck mount!4. The damping shaft is used on the top three-claw bracket to realize 360-degree rotation and adjust to a suitable shooting angle at will5. Made of environmentally friendly silicone material, it feels skin-friendly and moist, and the surface is anti-slip, which can increase the friction during winding and make the winding more firm6. It weighs only 114g, and you can take a flexible bracket with you when you go out, which can realize various accessory functions and reduce the burden on luggage7. The bottom 1/4 threaded hole can be connected to a tripod and used as a tripod selfie stick8. For Gopro Hero series/DJI Action/Insta360/smartphones, etc. (For Insta360 required a 1/4 screw adapter )Parameter:1. Product size: diameter 25mm, length: 520mm2. Product weight: 114g3. Product load: 300g4. Product material: 316 stainless steel, aluminum alloy, silica gel, PCPrecautions:1. After the fixing is completed, please shake it slightly to confirm whether it is fixed firmly;2. Do not exceed the maximum load capacity of the bracket, otherwise there will be a risk of falling;3. Please store the product in a cool and dry place;4. When used as a tripod, it needs to be placed stably on a flat surface

Read more less