DJI & GoPro Accessories

1. The appearance and structure of this 3D skin-friendly mask have been optimized, and the bridge of the nose is equipped with an anti-leakage pad that can be cut freely and installed in two ways2. The inside of the mask is made of multi-layer sponge inner core, and the outer layer is made of skin-friendly Lycra fabric, which is made of environmentally friendly new technology, which effectively prevents light leakage and improves the overall wearing comfort3. Non-destructive installation, increase the value of glasses and individual needs.4. The headband is made of Lycra sports skin-friendly elastic fabric, the surface of the headband is perforated, breathable, sweat-resistant and washable5. Compatible products: suitable for DJI FPV Goggles V1 V26. Product net weight: 20g (weight of single eye pad)

Read more less

Suction Cup Mount1. Strong adsorption, not afraid of high speed, the suction cup is still stable under high speed driving, which is safe and secure. 2. The air pump vacuum suction cup adopts industrial grade air pump, which has greater adsorption force. 3. Installation and disassembly operation method, press adsorption: press the air valve until the red line cannot be pushed. (Release the adsorption: Use your hands to move the raised rubber blocks on both sides to release the adsorption.) 4. Main material: Aluminum alloy processed by CNC, feels good. Small and portable, durable. Precautions: 1. The suction cup must be adsorbed on a dry and smooth surface, and ensure that the red line on the exhaust valve enters the air pump during adsorption, otherwise there will be a risk of falling if it fails to meet the adsorption requirements 2. Please check every four hours during use, and operate carefully to avoid accidental lossMagic Arm1. 360-degree rotating double ball head: 360-degree rotating double ball head design can meet your shooting needs from any angle. The powerful magic arm on the double ball head can realize simultaneous shooting of camera/action camera. 2. 2-5KG load capacity: The load capacity can reach 5KG, and the large inner hole head is equipped with rubber, which can increase friction and make the device more stable, allowing you to confidently capture any details during shooting. 3. Strong versatility: Two structures are used on both sides of the magic arm. The 1/4 screw can be used on 1/4 screw hole equipment such as camera rabbit cages, and the three bayonet can be used on various sports camera equipment. 4. Easy to use: Multi-functional double ball adapter only needs to tighten the middle knob, and the ball heads of all connecting parts can be fixed at the same time. And includes an extra elastic knob for easy removal of photography accessories. 5. Durable and portable: The magic arm bracket is made of CNC-processed aluminum alloy, which feels good in the hand. Small and portable, durable.

Read more less

1. Curve design, fit the human body structure, shooting more stable. 2. ABS+PC material, durable and not deformed 3. Hands free design, this accessory helps to film or photograph with your camera when hands are busy. 4. Applicable to sports cameras of various brands such as for GoPro/Insta360/DJ/SJcam 5. From the perspective of "I" shooting: Cycling, hiking, boating, live broadcast, travel, food production, daily VLOG 6. Weight: 45g

Read more less

1. Strong adsorption, not afraid of high speed, the suction cup is still stable under high speed driving, which is safe and secure. 2. The air pump vacuum suction cup adopts industrial grade air pump, which has greater adsorption force. 3. Installation and disassembly operation method, press adsorption: press the air valve until the red line cannot be pushed. (Release the adsorption: Use your hands to move the raised rubber blocks on both sides to release the adsorption.) 4. Main material: Aluminum alloy processed by CNC, feels good. Small and portable, durable. Precautions: 1. The suction cup must be adsorbed on a dry and smooth surface, and ensure that the red line on the exhaust valve enters the air pump during adsorption, otherwise there will be a risk of falling if it fails to meet the adsorption requirements 2. Please check every four hours during use, and operate carefully to avoid accidental loss

Read more less

1. Made of PA+ABS, stable installation, help you record every exciting moment while riding. 2. Helps you securely attach the action camera to the helmet chin for easy disassembly and assembly. 3. Adhesive stickers makes the helmet chin mount fit the helmet better, providing anti-slip and anti-shake functions to ensure shooting stability. 4. Compatible with any full helmet and action camera for GoPro style mount. 5. Provide a good angle for POV shooting. 6. Easy to install and remove.

Read more less

Neck Strap1. Made of ABS and nylon material, wear-resistant and durable, prevent deformation 2. Solve the problem that the remote control cannot use the strap without a strap hole. Easily put on a lanyard to free your hands 3. Double hanging buckle, more balanced, more stable and safe, anti-falling provides extra protection for the remote control, 4. High-quality metal hanging buckle, easy to use. 5. Will not affect the operation of the remote control, will not affect the phone clip, will not block the screen of the phoneSilicone Case1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced surface design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experienceFeatures1. Dual-Hook Remote control embedded bracket x 1 2. Lanyard x 1 3. Silicone Case x 1

Read more less

1. Specially designed for DJI Avata series, it can accommodate new advanced suits and exploration suits2. PP material, hard shell design, wear-resistant and drop-resistant3. Highly tight and waterproof, can reach IP67 waterproof4. High-density sponge, good softness, easy to store accessories5. Portable handle, strong load-bearing, comfortable hand feel, relieve hand pressure.6. Size: 48 x 36 x 19cm7. Weight: 2767g

Read more less

1. Specially designed for DJI OM6 / Mini 3 / Mini 3 Pro / Mini 22. High-quality leather surface and nylon waterproof fabric, wear-resistant and durable3. Two-way zipper, more convenient to use; Compact structure, small size and light weight4. There is a removable pearl cotton pad inside to expand the space, and the built-in net pocket has a larger capacity5. Material: 900D covered with PU film and 900D nylon6. Size: 32.2 x 17.7 x 9.8cm7. Weight:330g

Read more less

1. The eye light is specially designed for Mini3 UAV, which fits the fuselage very well, and the overall shape is novel and unique2. Snap-on design, easy to install3. The built-in battery can be recharged and used, easy to charge4. Light and stable, weighing only 16g5. Colorful lighting effect, there are 15 lighting modes6. Dimensions: 72.5 x 49.5 x 30mm

Read more less

1. The upgraded version is designed with reinforced tension glue, which can be kneaded at will without collapsing or deforming.2. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover to prevent foreign objects from colliding and scratching the remote control3. Anti-slip texture design. When flying outdoors, it effectively prevents hands from sweating and slipping, making it safer and more comfortable to hold.4. The surface is sprayed with oil, which is easy to clean and does not leave any dirt.5. Flexible and elastic, easy to disassemble and install.6. Size: 15.27 x 10.33 x 4.78cm

Read more less

1. Specially designed for DJI Mavic 3 Pro, precise mold opening, small size and large capacity, can accommodate RC remote control with screen + 3 batteries + aircraft + charging housekeeper + 100W charger + other small accessories;2. High-quality PU leather fabric, exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. Nylon webbing is used, which is easy to adjust the length, light and wear-resistant5. Size: 34.8 x 32.8 x 12.2cm

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. Toothed contact surface greatly enhances friction and effectively prevents slipping, bringing you comfort2. The telescopic rocker cannot be accommodated in the groove of the remote control. We have provided a portable storage box.3. Effectively extend 0-0.6cm, loosen the head first, adjust the second part clockwise to a suitable position, then fix and tighten the first part counterclockwise (the higher the rocker, the greater the swing range, more sensitive controls)4. The higher the joystick, the greater the swing range, and the more sensitive the control5. Ergonomic design, CNC turning process, anodic oxidation coloring process6. Precise control of the extended rocker: the aluminum alloy telescopic rocker can be adjusted up and down to extend 0-0.6cm, which can be adjusted according to your own needs and precisely control the flight of the drone7. Applicable models: suitable for DJI Mini 3 Pro8. Material: aluminum alloy9. Size: 3.2x0.8x0.9cm10. Net weight: 5g11. Gross weight: 17g12. Note: The product only includes the telescopic rocker, not including the droneinstallation steps:1. Unscrew the first part of the joystick clockwise, then turn the second part clockwise to adjust the height2. Rotate the first part counterclockwise and tighten it, the other is the same3. Install the assembled rocker on the remote control4. The installation is complete

Read more less

1. Applicable models: for DJI Pocket 22. Connect the adapter, which can be expanded and matched with other devices3. Small size and light weight4. Contains EVA cotton, which is more suitable for the fuselage5. With 1/4 screw hole and GOPRO interface, more accessories can be transferred6. Can be used with supplementary light, microphone and other accessories7. Stand size: 4.7 x 6.4 x 1.6 cm8. Product net weight: bracket: 11.5 grams, bracket + adapter: 30.5 grams9. Note: only brackets or brackets + adapters will be shipped, nothing else!

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. Material: plastic2. For DJI Mavic Mini / Mini 2 SE3. Protect the lens and gimbal, easily store the drone and propellers4. Simple operation, easy installation and disassembly5. Easy to carry and easy to store6. Integrated design to protect the aircraft, dustproof and anti-collisionInstallation notes:1. Buckle the lens protection cover on the gimbal lens2. Shrink the paddle and align the beamer with the sensor3. Wrap the beamer around once and buckle it in the corresponding hole4. The installation is complete

Read more less

1. Applicable models: for DJI MAVIC 2 remote control with screen2. Material: PA/Nylon3. Adjustable length: 72-134mm4. Using environmentally friendly copper screws, easy to disassemble and durable5. Bold hook, strong and wear-resistant6. The length can be adjusted by yourself, which is more convenient to use7. Polyester webbing, soft texture, tough and wear-resistant, comfortable to wear8. Product net weight: 48.28 grams9. Note: Only the lanyard + screws will be shipped, nothing else!

Read more less

1. The searchlight can be adjusted 90 degrees from horizontal to vertical, and can be adjusted according to its own needs2. Large power, large lamp beads, can work brightly for a long time, suitable for night lighting and search and rescue work3. Using the heightened tripod can increase the height of the drone by 4cm from the ground, preventing the drone from taking off or landing on complex ground and damaging the bottom sensor of the drone. The tripod avoids the sensor and does not affect the flight (the heightened tripod is optional)4. A variety of lighting modes are free to choose: press the flashlight once to turn on the light, the default mode is strong light mode, click the switch to switch modes, there are three light modes: strong light, low light, flash, and the telescopic light tube can adjust the light scope5. The searchlight adopts the fixed buckle-mounted installation of the machine arm, which can be quickly disassembled and assembled, saving time and effort and not easy to fallFlashlight parameters:1. Lamp bead: XPE2. Material: aluminum alloy3. Lens: optical convex mirror4. Net weight of the flashlight: 38 grams5. Mode: 3 mode adjustment6. Battery: 1200mAh lithium battery7. Battery life: 200-300 minutes8. Range (MAX): 100 meters9. Charging time: about 2 hours10. With power indicator light, red light is charging/green light is fully charged

Read more less

1. The design of the translucent protective cover makes it easy to observe the protection status of the gimbal at any time 2. Not afraid of bending, spring back in seconds, the protective cover of the gimbal is made of PVC material with toughness, which can be bent to a certain extent and is not easy to deform 3. Four obstacle avoidance protection gimbal, lens, sensor, etc., integrated protection design, anti-knock, anti-scratch, anti-dust 4. Filter storage protection, the protective cover buckle does not affect the storage of various types of filters, and the filter can be removed 5. Snap-on design, one step in place 6. Effective protection Portable storage, all-round effective protection of the tip of the propeller, preventing the intricateness of the propeller blade, easy to store, not easy to bend 7. The product is molded with precision molds, combined with the fuselage design to effectively protect the front and rear propellers. At the same time, it is equipped with the gimbal camera protection cover for double protection to prevent the gimbal from being scratched and the propellers from being bent 8. Applicable models: suitable for DJI Mini 3 Pro 9. Material: PVC 10. Note: The product does not contain UAV Others 11. Dimensions: Lens cover: 7x6.6x5.5cm 12. Net weight: lens cap: 10.8g, propeller: 10.2g 13. Gross weight: lens cap: 52.7g, propeller: 40.4g Propeller installation steps: 1. Align the front propellers first, then snap the propellers into the drone, press on the air vent of the fuselage, and the installation is complete when you hear the sound of "Tata" 2. Align the rear blades, then snap the blades into the drone, press the bottom notch, and the installation is complete when you hear the sound of the tower 3. On the basis of the protection of the propeller, install the gimbal camera protection cover, and now snap its top into the groove 4. Then snap the protective cover of the gimbal camera into the bottom of the fuselage, and the installation is complete Steps to disassemble the propeller: 1. Pull the left and right sides of the oar restraint outward, and you can disassemble when you hear the sound of tata 2. Push down the paddle restrainer in the bottom notch to remove it 3. Take out the buckle at the bottom of the protective cover of the gimbal and camera upwards, and then it can be disassembled

Read more less

1. 材质：碳纤维2. 可根据桨叶条纹对应安装3. 表面平滑亮光，强度高，重量轻4. 重量：一对4.6克，两对9.3克5. 尺寸：5.9x1.5x0.5厘米

Read more less

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil3. ND/PL filter:-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.4. Material: plastic + optical glass5. Product size: 2 x 1.3 x 0.3cm6. Net weight: 5.7 grams7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

Read more less

1. The net weight of the raised tripod itself is 23.6g, which does not affect the flight speed and does not cause flight burden.2. The height-increasing tripod is made of plastic material, which can be folded. It is strong and wear-resistant, and it is also convenient to carry and store when going out3. The heightening tripod can effectively increase the height by 4cm, and the buoyancy rod heightening tripod can effectively increase the height by 7.6cm, effectively protecting the vision below and the infrared obstacle avoidance system4. The contact area between the length of the tripod and the ground is larger, and the take-off and landing are more stable5. The buoyancy rod can provide strong buoyancy for the drone, allowing the drone to take off and land on the water easilyParameter:1. Material: plastic2. Applicable equipment: suitable for DJI Mini 3 Pro (Note: Drone is not included)3. Product size: landing gear 18 x 11 x 7cm, buoyancy landing gear 22.5 x 20 x 10.5cm4. Weight: 20.3 grams for landing gear , 23.6 grams for buoyancy landing gear

Read more less

1. The design of the translucent protective cover makes it easy to observe the protection status of the gimbal at any time 2. Not afraid of bending, spring back in seconds, the protective cover of the gimbal is made of PVC material with toughness, which can be bent to a certain extent and is not easy to deform 3. Four obstacle avoidance protection gimbal, lens, sensor, etc., integrated protection design, anti-knock, anti-scratch, anti-dust 4. Filter storage protection, the protective cover buckle does not affect the storage of various types of filters, and the filter can be removed 5. Snap-on design, one step in place 6. Effective protection Portable storage, all-round effective protection of the tip of the propeller, preventing the intricateness of the propeller blade, easy to store, not easy to bend 7. The product is molded with precision molds, combined with the fuselage design to effectively protect the front and rear propellers. At the same time, it is equipped with the gimbal camera protection cover for double protection to prevent the gimbal from being scratched and the propellers from being bent 8. Applicable models: suitable for DJI Mini 3 Pro 9. Material: PVC 10. Note: The product does not contain UAV Others 11. Dimensions: Lens cover: 7x6.6x5.5cm 12. Net weight: lens cap: 10.8g, propeller: 10.2g 13. Gross weight: lens cap: 52.7g, propeller: 40.4g Propeller installation steps: 1. Align the front propellers first, then snap the propellers into the drone, press on the air vent of the fuselage, and the installation is complete when you hear the sound of "Tata" 2. Align the rear blades, then snap the blades into the drone, press the bottom notch, and the installation is complete when you hear the sound of the tower 3. On the basis of the protection of the propeller, install the gimbal camera protection cover, and now snap its top into the groove 4. Then snap the protective cover of the gimbal camera into the bottom of the fuselage, and the installation is complete Steps to disassemble the propeller: 1. Pull the left and right sides of the oar restraint outward, and you can disassemble when you hear the sound of tata 2. Push down the paddle restrainer in the bottom notch to remove it 3. Take out the buckle at the bottom of the protective cover of the gimbal and camera upwards, and then it can be disassembled

Read more less

1. The net weight of the raised tripod itself is 23.6g, which does not affect the flight speed and does not cause flight burden.2. The height-increasing tripod is made of plastic material, which can be folded. It is strong and wear-resistant, and it is also convenient to carry and store when going out3. The heightening tripod can effectively increase the height by 4cm, and the buoyancy rod heightening tripod can effectively increase the height by 7.6cm, effectively protecting the vision below and the infrared obstacle avoidance system4. The contact area between the length of the tripod and the ground is larger, and the take-off and landing are more stable5. The buoyancy rod can provide strong buoyancy for the drone, allowing the drone to take off and land on the water easilyParameter:1. Material: plastic2. Applicable equipment: suitable for DJI Mini 3 Pro (Note: Drone is not included)3. Product size: landing gear 18 x 11 x 7cm, buoyancy landing gear 22.5 x 20 x 10.5cm4. Weight: 20.3 grams for landing gear , 23.6 grams for buoyancy landing gear

Read more less

1. Applicable models: for DJI Pocket 22. Connect the adapter, which can be expanded and matched with other devices3. Small size and light weight4. Contains EVA cotton, which is more suitable for the fuselage5. With 1/4 screw hole and GOPRO interface, more accessories can be transferred6. Can be used with supplementary light, microphone and other accessories7. Stand size: 4.7 x 6.4 x 1.6 cm8. Product net weight: bracket: 11.5 grams, bracket + adapter: 30.5 grams9. Note: only brackets or brackets + adapters will be shipped, nothing else!

Read more less

1. The searchlight can be adjusted 90 degrees from horizontal to vertical, and can be adjusted according to its own needs2. Large power, large lamp beads, can work brightly for a long time, suitable for night lighting and search and rescue work3. Using the heightened tripod can increase the height of the drone by 4cm from the ground, preventing the drone from taking off or landing on complex ground and damaging the bottom sensor of the drone. The tripod avoids the sensor and does not affect the flight (the heightened tripod is optional)4. A variety of lighting modes are free to choose: press the flashlight once to turn on the light, the default mode is strong light mode, click the switch to switch modes, there are three light modes: strong light, low light, flash, and the telescopic light tube can adjust the light scope5. The searchlight adopts the fixed buckle-mounted installation of the machine arm, which can be quickly disassembled and assembled, saving time and effort and not easy to fallFlashlight parameters:1. Lamp bead: XPE2. Material: aluminum alloy3. Lens: optical convex mirror4. Net weight of the flashlight: 38 grams5. Mode: 3 mode adjustment6. Battery: 1200mAh lithium battery7. Battery life: 200-300 minutes8. Range (MAX): 100 meters9. Charging time: about 2 hours10. With power indicator light, red light is charging/green light is fully charged

Read more less

1. PD+QC3.0 fast charging port, supports simultaneous charging of UAV and remote control, bi-directional output design, charging fast enough, can get rid of low battery anxiety2. Pure copper contacts, anti-scratch and anti-oxidation, better electrical conductivity, pure copper contact shrapnel, safe and worry-free3. Universal interface, intelligent identification switching, compatible with a variety of mainstream flash charging protocols in the market, universal for Apple and Android phones, suitable for mainstream 12V 24V mainstream models in the market4. Material: ABS+ aluminum alloy5. Input voltage: DC 12V-24V6. Output voltage: DC 5V7. Compatible products: for DJI MAVIC 3/MINI 28. PD output: 5V 5A/9V 5A/12V 5A/15V 5A/20V 5A9. USB output: 5V 3A/9V 2A/12V 1.5A10. Working temperature: 0-55 degrees Celsius11. Mavic 3 charging time: about 95 minutes when the car charger works at 24V 2.5A; about 95 minutes when it works at 12V 5A12. Mini 2 charging time: about 90 minutes when the car charger is working at 24V 1.2A13. Packing list: charger x1, data cable x1 (excluding drone and remote control)14. Dimensions: about 7 x 4.2 x 2.8cm15. Weight: about 43g

Read more less

1. Material: EVA+ waterproof nylon fabric2. Compatible with DJI ACTION 23. Equipped with a carabiner hook, which can be lifted and hung4. The width is moderate, it is not easy to be off-line, and the service life is long5. Easy to carry when going out6. Simple and elegant appearance, large capacity7. Weight: 167 grams8. Dimensions: 13x6.5x20 cm9. Note: Only the bag is sold, others are not included

Read more less

1. The design of the translucent protective cover makes it easy to observe the protection status of the gimbal at any time 2. Not afraid of bending, spring back in seconds, the protective cover of the gimbal is made of PVC material with toughness, which can be bent to a certain extent and is not easy to deform 3. Four obstacle avoidance protection gimbal, lens, sensor, etc., integrated protection design, anti-knock, anti-scratch, anti-dust 4. Filter storage protection, the protective cover buckle does not affect the storage of various types of filters, and the filter can be removed 5. Snap-on design, one step in place 6. Effective protection Portable storage, all-round effective protection of the tip of the propeller, preventing the intricateness of the propeller blade, easy to store, not easy to bend 7. The product is molded with precision molds, combined with the fuselage design to effectively protect the front and rear propellers. At the same time, it is equipped with the gimbal camera protection cover for double protection to prevent the gimbal from being scratched and the propellers from being bent 8. Applicable models: suitable for DJI Mini 3 Pro 9. Material: PVC 10. Note: The product does not contain UAV Others 11. Dimensions: Lens cover: 7x6.6x5.5cm 12. Net weight: lens cap: 10.8g, propeller: 10.2g 13. Gross weight: lens cap: 52.7g, propeller: 40.4g Propeller installation steps: 1. Align the front propellers first, then snap the propellers into the drone, press on the air vent of the fuselage, and the installation is complete when you hear the sound of "Tata" 2. Align the rear blades, then snap the blades into the drone, press the bottom notch, and the installation is complete when you hear the sound of the tower 3. On the basis of the protection of the propeller, install the gimbal camera protection cover, and now snap its top into the groove 4. Then snap the protective cover of the gimbal camera into the bottom of the fuselage, and the installation is complete Steps to disassemble the propeller: 1. Pull the left and right sides of the oar restraint outward, and you can disassemble when you hear the sound of tata 2. Push down the paddle restrainer in the bottom notch to remove it 3. Take out the buckle at the bottom of the protective cover of the gimbal and camera upwards, and then it can be disassembled

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. Small size, light weight, high fire performance, and the power can be marked2. The fabric is PVC flame-retardant cloth, adjustable switch, and the lining is fire-resistant cloth3. Applicable models: suitable for DJI Mini 3 Pro4. Note: The product only includes the bag, not including batteries and other items5. Material: fireproof cloth6. Size: 1 battery: 6x4.3x8.3cm, 2 batteries: 9x4.3x8.8cm, 3 batteries: 11x4.3x8cm7. Weight: 1 battery: 25.5g, 2 batteries: 38.9g, 3 batteries: 46.6g

Read more less

1. The tripod is made of plastic material, which can be folded. It is strong and wear-resistant, and it is also convenient to carry and store when going out.2. The net weight of the buoyancy rod set is 28.6g, which does not affect the flight speed and does not cause flight burden3. The buoyancy rod set effectively increases the height by 7.3cm, effectively protecting the vision below and the infrared obstacle avoidance system4. Applicable models: suitable for DJI Mini 2 (note: drones are not included)5. Product size: 20 x 21.6 x 9cm6. Weight: 28.6 grams

Read more less

1. Compatible models: Compatible with DJI Action 22. Material: ABS, copper core3. Smart chip, highly restore sound details4. Using copper core, the sound transmission is clearer5. Plug and play, instant response, no delay6. Flexible wire, uniform force7. Reinforced interface, resistant to bending, explosion-proof8. Applicable to various scenarios9. Product size: 11.7 x 1 x 0.7 cm10 Product net weight: 4.3 grams11. Note: Only the audio adapter cable will be delivered in the delivery, and no others will be included!

Read more less

1. Adopt optical tempered glass with a hardness of 9H, anti-scratch, anti-drop, and dust-proof, effectively protect the camera lens, avoid the camera from being scratched and scratched, without fear of scratching 2. The light transmittance of the lens material is close to 92%, and the AR coating layer is applied to increase the light transmittance of the lens to more than 98%. 3. The lens is coated with a waterproof film layer, and the dripping angle reaches 115 degrees, and no water droplets remain on the lens surface to affect the shooting effect 4. Adhesive arrangement is adopted, easy to install and disassemble 5. This protective mirror can be used with the metal frame on the market at the same time 6. Applicable models: Suitable for Insta360 X3 Precautions: 1. Please make sure the lens used for the camera is clean and dry before use. 2. After removing the X3 lens guard, apply new adhesive before putting it back on the X3. 3. The lens guard of the X3 is splash-proof, but not designed for underwater use. Please use a diving suit for underwater shooting. 4. To remove the X3 lens guard, use the provided pry tool. Be careful not to scratch the lens when removing the lens hood.

Read more less

1. Lightweight design, small size, will not affect the normal flight of the aircraft2. When flying at night, it is used as a signal light and plays a warning role3. Alternately flashing red and blue colors, high brightness, giving you a different visual effect4. Easy to install and paste, no additional tools required5. Universal style, suitable for any model6. Working hours: about 10 hours7. Power supply: built-in button battery for power supply8. Product weight: about 5g9. Dimensions: about 50 x 50 x 23mm10. Note: only the light and the back glue will be shipped, no other

Read more less

1. Material: carbon fiber2. For DJI Mavic Mini 3Pro3. Open the mold on the real machine without affecting the flight4. The blades are made of high-strength carbon fiber, light and weightless, and full of power after installation5. The installation is stable, firmly fastened, the original screw and the opening method of the blade6. Confirm that the propeller can be unfolded before installation7. Note: Too tight propellers will cause the drone to vibrate and make loud noises when starting8. Size: 7.5x1.5x0.5 cm

Read more less

Features1. ND filter specially designed for MAVIC 3 Pro drone 2. The ND filter can prevent excessive exposure and make the picture have appropriate motion blur. The luminosity changes continuously with the rotation of the lens, making the picture more comfortable and smooth 3. The multi-layer coating light reduction process is adopted to restore the truest color 4. Snap-type quick disassembly design, the original lens will not be damaged during installation; 5. The single weight of the filter is only 6.2G, high-precision adaptation, will not affect the flight performancePackage List1. ND8 x 1 2. ND16 x 1 3. ND32 x 1 4. ND64 x 1 5. Cleaning cloth x 1

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. A variety of different pattern stickers are available to bring a different flying experience.2. No air bubbles, reasonable opening to ensure that the sticker fits the body without losing its appearance.3. Made of PVC material, can be pasted repeatedly, no glue left when peeled off, more durable.4. Applicable models: suitable for DJI Mini 3 Pro5. Size: 20.9 x 16.1 x 0.3cm6. Weight: 28.2 gramsShipping list: sticker x 1 setNote: stickers only, drones and accessories used in the demo are not included

Read more less

1. The UV filter specially designed for the MAVIC 3 Pro UAV. The UV mirror can prevent the lens surface coating from directly contacting the external environment and play a protective role. 2. The aluminum alloy frame + AGC optical glass restores the most authentic colors 3. Waterproof and oil-proof, tempered and anti-scratch, lotus flower waterproof effect, easy to clean without leaving traces 4. Snap-on quick disassembly design, the original lens will not be damaged during installation 5. The single weight of the filter is only 6.2G, high-precision adaptation, will not affect the flight performance 6. Frame: Matte black 7. Material: Aluminum alloy + AGC optical glass 8. Size: 4.8 x 4.8 x 0.6cm

Read more less

1. This case needs to be used with the waterproof case (not included), not directly on the camera2. For Insta360 X3 action camera (camera and waterproof case not included)3. Tightly and seamlessly combined with the camera housing, providing strong protection for diving and the camera.4. Made of environmentally friendly silicone material, scratch-resistant, soft and durable.5. Easy to install and remove.6. Dimensions: about 70 x 69mmPackage includes:1x Silicone protective case

Read more less

1. Specially designed for the Mavic 3 Pro series, it can accommodate the flying kit and master kit, such as: aircraft + RC PRO remote control + RC remote control + 4 pieces of flight batteries + charger + filter + charging butler + propellers + data line etc. 2. ABS material, hard shell design, wear-resistant and drop-resistant 3. Highly tight and waterproof, can withstand repeated watering tests 4. High-density sponge, good softness, easy to store accessories 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure 6. Size: 41.8 x 34.5 x 18.6cm

Read more less

Features1. CPL filter specially designed for MAVIC 3 Pro drone 2. CPL adjustable filter, the luminosity changes continuously with the rotation of the lens, making the picture more comfortable and smooth 3. The multi-layer coating light reduction process is adopted to restore the truest color 4. Snap-on quick disassembly design, the original lens will not be damaged during installation 5. The single weight of the filter is only 8.3G, high-precision adaptation, will not affect the flight performanceSpecifications1. Frame: Matte black 2. Material: Aluminum alloy + AGC optical glass 3. Size: 5.6 x 4.8 x 0.8cmSpecification: General Compatible with DJI:  Mavic 3 Pro Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 200 Carton Weight 7.50kgs / 16.53lb Carton Size 35cm * 28cm * 20cm / 13.78inch * 11.02inch * 7.87inch Loading Container 20GP: 1360 cartons * 200 pcs = 272000 pcs 40HQ: 3158 cartons * 200 pcs = 631600 pcs

Read more less

1. Material: carbon fiber2. For DJI Mavic Mini 3Pro3. Open the mold on the real machine without affecting the flight4. The blades are made of high-strength carbon fiber, light and weightless, and full of power after installation5. The installation is stable, firmly fastened, the original screw and the opening method of the blade6. Confirm that the propeller can be unfolded before installation7. Note: Too tight propellers will cause the drone to vibrate and make loud noises when starting8. Size: 7.5x1.5x0.5 cm

Read more less