Waveshare 5inch E-Paper Display 960×552 Resolution, SPI Interface Compatible With Raspberry Pi GPIO Display Only


1. The electronic ink screen uses "microcapsule electrophoretic display" technology for image display. Its working principle involves charged nanoparticles suspended in liquid migrating under the influence of an electric field. Under ambient light, reflection creates a display effect close to traditional printed paper. Electronic ink screens can clearly display images under ambient light such as lamps or natural light without requiring backlighting, with a viewing angle of nearly 180 degrees. Due to their display effect comparable to traditional paper, they are commonly used in applications like e-readers.
2. No backlight is required; the last screen content can be maintained for a long time after power-off.
3. Very low power consumption, with power usage occurring primarily during refresh cycles.
4. Comprehensive supporting documentation provided: Driver board schematic, sample programs for Raspberry Pi / Jetson series / Arduino / STM32 / ESP32, etc.
5. The following features apply only to the module version (i.e., including the Driver HAT):
--Designed based on Raspberry Pi 40PIN GPIO interface, compatible with Raspberry Pi and Jetson series motherboards.
--Pre-reserved SPI communication interface for easy connection to master control boards like Raspberry Pi / Arduino / STM32 / ESP32.
--On-board level conversion chip compatible with 3.3V and 5V level interfaces.

Parameters:
1. Operating voltage: Bare screen version: 3.3V; Module With Driver HAT version: 3.3V to 5V.
2. Communication interface: 3-wire SPI, 4-wire SPI.
3. Dimensions: Bare screen size: 126.38 x 71.19 x 0.79 mm; Driver HAT size: 30.50 x 65.00 mm.
4. Display size: 110.59 x 62.65 mm.
5. Pixel pitch: 0.1833 x 0.1833 mm.
6. Resolution: 960 x 552 pixels.
7. Display colors: Black, white.
8. Gray levels: 2.
9. Partial refresh: 0.7 s.
10. Full refresh: 1.8 s.
11. Refresh power consumption: Less than 50 mW.
12. Sleep current: Less than 0.01 microampere (close to zero).
13. Viewing angle: Greater than 170 degrees.
Specification:
Package Weight
One Package Weight 0.08kgs / 0.19lb
One Package Size 18cm * 10cm * 4cm / 7.09inch * 3.94inch * 1.57inch
Qty per Carton 90
Carton Weight 8.30kgs / 18.30lb
Carton Size 38cm * 32cm * 47cm / 14.96inch * 12.6inch * 18.5inch
Loading Container 20GP: 466 cartons * 90 pcs = 41940 pcs
40HQ: 1083 cartons * 90 pcs = 97470 pcs

Waveshare 5inch E-Paper Display 960×552 Resolution, SPI Interface Compatible With Raspberry Pi GPIO Display Only

Product form

SKU: TBD0603055201

  • In stock (Processing Time 1 - 72 hours)

226,07 zł

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. The electronic ink screen uses "microcapsule electrophoretic display" technology for image display. Its working principle involves charged nanoparticles suspended in liquid migrating under the influence of an electric field. Under ambient light, reflection creates a display effect close to traditional printed paper. Electronic ink screens can clearly display images under ambient light such as lamps or natural light without requiring backlighting, with a viewing angle of nearly 180 degrees. Due to their display effect comparable to traditional paper, they are commonly used in applications like e-readers.
    2. No backlight is required; the last screen content can be maintained for a long time after power-off.
    3. Very low power consumption, with power usage occurring primarily during refresh cycles.
    4. Comprehensive supporting documentation provided: Driver board schematic, sample programs for Raspberry Pi / Jetson series / Arduino / STM32 / ESP32, etc.
    5. The following features apply only to the module version (i.e., including the Driver HAT):
    --Designed based on Raspberry Pi 40PIN GPIO interface, compatible with Raspberry Pi and Jetson series motherboards.
    --Pre-reserved SPI communication interface for easy connection to master control boards like Raspberry Pi / Arduino / STM32 / ESP32.
    --On-board level conversion chip compatible with 3.3V and 5V level interfaces.

    Parameters:
    1. Operating voltage: Bare screen version: 3.3V; Module With Driver HAT version: 3.3V to 5V.
    2. Communication interface: 3-wire SPI, 4-wire SPI.
    3. Dimensions: Bare screen size: 126.38 x 71.19 x 0.79 mm; Driver HAT size: 30.50 x 65.00 mm.
    4. Display size: 110.59 x 62.65 mm.
    5. Pixel pitch: 0.1833 x 0.1833 mm.
    6. Resolution: 960 x 552 pixels.
    7. Display colors: Black, white.
    8. Gray levels: 2.
    9. Partial refresh: 0.7 s.
    10. Full refresh: 1.8 s.
    11. Refresh power consumption: Less than 50 mW.
    12. Sleep current: Less than 0.01 microampere (close to zero).
    13. Viewing angle: Greater than 170 degrees.
    Specification:
    Package Weight
    One Package Weight 0.08kgs / 0.19lb
    One Package Size 18cm * 10cm * 4cm / 7.09inch * 3.94inch * 1.57inch
    Qty per Carton 90
    Carton Weight 8.30kgs / 18.30lb
    Carton Size 38cm * 32cm * 47cm / 14.96inch * 12.6inch * 18.5inch
    Loading Container 20GP: 466 cartons * 90 pcs = 41940 pcs
    40HQ: 1083 cartons * 90 pcs = 97470 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Login

    Forgot your password?

    Don't have an account yet?
    Create account