Waveshare For Raspberry Pi LC29H Series Dual-Band L1+L5 Positioning GPS Module, Spec: (DA) GPS/RTK HAT

Description


Features:
1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.
2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.
3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.
4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.
5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano
6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.
7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance
9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds
11. Support QGNSS software to facilitate setting various module functions
12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start
13. There are 4 LED indicators on the board to indicate the working status of the module.
14. LC29H(AA) GPS HAT has the following features:
-Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas
-Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time
15. LC29H(DA) GPS/RTK HAT has the following features:
-Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment
16. LC29H(BS) GPS/RTK HAT has the following features:
-Supports GNSS original observation and correction data output, suitable for establishing RTK base stations

Product parameters:
1. Frequency band
GPS/QZSS: L1C/A, L5
Beidou system: B1I, B2a
Galileo: E1, E5a
GLONASS: L1
2. Number of concurrent GNSS
GPS/QZSS+Beidou+Galileo+GLONASS
3. Sensitivity
Tracking navigation: -165dBm
Reacquisition: -159dBm, -157dBm, -159dBm
Cold start: -147dBm, -145dBm, -147dBm
4. Dynamic performance
Acceleration (maximum): 4g
Altitude (maximum): 10000m
Speed (maximum): 500m/s
5. Communication interface
UART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)
6. Protocol: NMEA 0183 V4.10, RTCM 3.x
7. Power supply: 5V
8. Total current: less than 40mA@5V (continuous mode)
9. Operating temperature: -40 to 85 degrees Celsius
10. Product size: 65 x 30.5mm
11. Weight: 126g

Packing list:
-LC29H GPS hat x 1
-2x20PIN female socket x 1
-GPS external antenna (D) x 1
-IPEX 1 to SMA cable 17cm x 1
-Screw pack x1

Waveshare For Raspberry Pi LC29H Series Dual-Band L1+L5 Positioning GPS Module, Spec: (DA) GPS/RTK HAT

Product form

SKU: TBD0576529403

  • In stock (Processing Time 1 - 72 hours)

514,52 zł

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Features:
    1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.
    2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.
    3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.
    4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.
    5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano
    6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.
    7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
    8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance
    9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
    10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds
    11. Support QGNSS software to facilitate setting various module functions
    12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start
    13. There are 4 LED indicators on the board to indicate the working status of the module.
    14. LC29H(AA) GPS HAT has the following features:
    -Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas
    -Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time
    15. LC29H(DA) GPS/RTK HAT has the following features:
    -Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment
    16. LC29H(BS) GPS/RTK HAT has the following features:
    -Supports GNSS original observation and correction data output, suitable for establishing RTK base stations

    Product parameters:
    1. Frequency band
    GPS/QZSS: L1C/A, L5
    Beidou system: B1I, B2a
    Galileo: E1, E5a
    GLONASS: L1
    2. Number of concurrent GNSS
    GPS/QZSS+Beidou+Galileo+GLONASS
    3. Sensitivity
    Tracking navigation: -165dBm
    Reacquisition: -159dBm, -157dBm, -159dBm
    Cold start: -147dBm, -145dBm, -147dBm
    4. Dynamic performance
    Acceleration (maximum): 4g
    Altitude (maximum): 10000m
    Speed (maximum): 500m/s
    5. Communication interface
    UART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)
    6. Protocol: NMEA 0183 V4.10, RTCM 3.x
    7. Power supply: 5V
    8. Total current: less than 40mA@5V (continuous mode)
    9. Operating temperature: -40 to 85 degrees Celsius
    10. Product size: 65 x 30.5mm
    11. Weight: 126g

    Packing list:
    -LC29H GPS hat x 1
    -2x20PIN female socket x 1
    -GPS external antenna (D) x 1
    -IPEX 1 to SMA cable 17cm x 1
    -Screw pack x1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account