WAVESHARE RP2350 Industrial Control Board 8-Channel Network Relays Based On RP2350 Main Controller, Specification: PoE Network Port


1. Features the RP2350B microcontroller chip designed by Raspberry Pi.
2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.
3. Built-in 520KB of SRAM and 16MB of on-chip Flash.
4. Uses a Type-C interface, eliminating concerns about correct plug orientation.
5. Uses high-quality relays, allowing connection of loads: 10A 250V AC or 10A 30V DC.
6. Digital input with bidirectional optocoupler isolation, supporting passive and active digital inputs; relays support control in conjunction with switch inputs.
7. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.
8. On-board pin header interface for connecting other devices.
9. On-board terminal block power interface, supporting a wide voltage range of 7~36V, convenient for industrial power supply.
10. On-board RTC clock chip, supporting scheduled tasks.
11. On-board W5500 Ethernet chip, extending 10/100Mbps network connectivity via SPI interface.
12. PoE Ethernet port version supports external PoE modules for Power over Ethernet functionality (compliant with IEEE 802.3af standard).
13. On-board optocoupler isolation to prevent high-voltage circuits connected to the relays from interfering with the control chip.
14. On-board digital isolation to prevent external signals from interfering with the control chip.
15. On-board integrated power isolation, providing stable isolated voltage; no additional power supply is required for the isolated end.
16. On-board Micro SD card slot for external SD card storage of images or files.
17. On-board buzzer, RGB LED, and power and RS485 transceiver indicator lights for easy monitoring of device operating status.
18. DIN rail mountable ABS protective casing for easy installation and safer use.
19. USB 1.1 host and device support.
20. Supports low-power sleep and hibernation modes
21. Can be recognized as a mass storage device via USB for drag-and-drop program download
22. 15 multi-functional GPIO pins
23. 2 SPI, 2 I2C, 2 UART, 8 12-bit ADCs, and 12 controllable PWM channels
14. Precise on-chip clock and timers, temperature sensor, on-chip accelerated floating-point library
15. 12 programmable I/O (PIO) state machines for custom peripheral support
16. Built-in power isolation, optocoupler isolation and other protection circuits for safety, stability and reliability
17. Dimensions: 175x90x40mm

Product parameters:
- USB interface
1. Interface type: USB Type-C
2. Power supply voltage: 5V
3. Functions: device power supply, USB communication and firmware download, etc.
- Isolated communication Interface
1. Interface type: RS485
2. Interface form: terminal block
3. Direction control: hardware automatic detection and control of data transmission direction
4. Interface protection: provides TVS tube protection, surge and electrostatic protection
5. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap
- Digital Input
1. Number of inputs: 8 channels
2. Input voltage range: 5V ~ 36V
3. Input type: passive input / active input (NPN type or PNP type)
4. Isolation type: Bidirectional optocoupler isolation
- Relay
1. Number of channels: 8 channels
2. Contact type: one normally open, one normally closed
3. Isolation type: optocoupler isolation
- Indicator lights
1. RGB: colorful cool LED beads, customizable display color
2. PWR: power indicator light, lights up red when USB is connected and voltage is detected
3. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface
4. RXD: receive indicator light, lights up when data is received from RS485 The blue light illuminates when the interface receives data.
5. Power supply range: 7V ~ 36V


Specification:
Package Weight
One Package Weight 0.34kgs / 0.76lb
One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch
Qty per Carton 30
Carton Weight 11.30kgs / 24.91lb
Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch
Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs
40HQ: 1212 cartons * 30 pcs = 36360 pcs

WAVESHARE RP2350 Industrial Control Board 8-Channel Network Relays Based On RP2350 Main Controller, Specification: PoE Network Port

Product form

SKU: TBD0606655602

  • In stock (Processing Time 1 - 72 hours)

385,62 zł

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Features the RP2350B microcontroller chip designed by Raspberry Pi.
    2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.
    3. Built-in 520KB of SRAM and 16MB of on-chip Flash.
    4. Uses a Type-C interface, eliminating concerns about correct plug orientation.
    5. Uses high-quality relays, allowing connection of loads: 10A 250V AC or 10A 30V DC.
    6. Digital input with bidirectional optocoupler isolation, supporting passive and active digital inputs; relays support control in conjunction with switch inputs.
    7. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.
    8. On-board pin header interface for connecting other devices.
    9. On-board terminal block power interface, supporting a wide voltage range of 7~36V, convenient for industrial power supply.
    10. On-board RTC clock chip, supporting scheduled tasks.
    11. On-board W5500 Ethernet chip, extending 10/100Mbps network connectivity via SPI interface.
    12. PoE Ethernet port version supports external PoE modules for Power over Ethernet functionality (compliant with IEEE 802.3af standard).
    13. On-board optocoupler isolation to prevent high-voltage circuits connected to the relays from interfering with the control chip.
    14. On-board digital isolation to prevent external signals from interfering with the control chip.
    15. On-board integrated power isolation, providing stable isolated voltage; no additional power supply is required for the isolated end.
    16. On-board Micro SD card slot for external SD card storage of images or files.
    17. On-board buzzer, RGB LED, and power and RS485 transceiver indicator lights for easy monitoring of device operating status.
    18. DIN rail mountable ABS protective casing for easy installation and safer use.
    19. USB 1.1 host and device support.
    20. Supports low-power sleep and hibernation modes
    21. Can be recognized as a mass storage device via USB for drag-and-drop program download
    22. 15 multi-functional GPIO pins
    23. 2 SPI, 2 I2C, 2 UART, 8 12-bit ADCs, and 12 controllable PWM channels
    14. Precise on-chip clock and timers, temperature sensor, on-chip accelerated floating-point library
    15. 12 programmable I/O (PIO) state machines for custom peripheral support
    16. Built-in power isolation, optocoupler isolation and other protection circuits for safety, stability and reliability
    17. Dimensions: 175x90x40mm

    Product parameters:
    - USB interface
    1. Interface type: USB Type-C
    2. Power supply voltage: 5V
    3. Functions: device power supply, USB communication and firmware download, etc.
    - Isolated communication Interface
    1. Interface type: RS485
    2. Interface form: terminal block
    3. Direction control: hardware automatic detection and control of data transmission direction
    4. Interface protection: provides TVS tube protection, surge and electrostatic protection
    5. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap
    - Digital Input
    1. Number of inputs: 8 channels
    2. Input voltage range: 5V ~ 36V
    3. Input type: passive input / active input (NPN type or PNP type)
    4. Isolation type: Bidirectional optocoupler isolation
    - Relay
    1. Number of channels: 8 channels
    2. Contact type: one normally open, one normally closed
    3. Isolation type: optocoupler isolation
    - Indicator lights
    1. RGB: colorful cool LED beads, customizable display color
    2. PWR: power indicator light, lights up red when USB is connected and voltage is detected
    3. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface
    4. RXD: receive indicator light, lights up when data is received from RS485 The blue light illuminates when the interface receives data.
    5. Power supply range: 7V ~ 36V


    Specification:
    Package Weight
    One Package Weight 0.34kgs / 0.76lb
    One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch
    Qty per Carton 30
    Carton Weight 11.30kgs / 24.91lb
    Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch
    Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs
    40HQ: 1212 cartons * 30 pcs = 36360 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account