DJI Mavic Series

Features1. The light propellers specially designed for DJI AIR 3 series are more colorful and cool when flying at night, and at the same time bring more detailed protection to night flights. 2. Colorful lighting effects. There are 3 light flashing modes that can be switched freely with one click. With long exposure photography technology, you can take photos with great visual impact and bring more fun to night flights. 3. The built-in battery can be recharged and used. The charging time is about 0.5 hours. The battery usage time is more than 50 minutes. 4. Made of transparent PC material, it is durable and has good light transmittance. The weight of a single blade is only 12.8g, which is light and stable and will not affect the endurance and normal flight of the AIR 3 series drones. 5. New aerodynamic design, excellent noise reduction performance, the same excellent performance as the original blades, without shaking.Package List1. Flashing ring propeller R x 2 2. Flashing ring propeller L x 2 3. Charging cable x 1 4. Instruction manual x 1

Read more less

1. Stop The Hood in Any Angles. We use two sun hoods with damped shaft to guarantee satisfied sunshade in any angles. 2. Upgraded Vice Hood. It is easier to get a satisfied sunshade effects with two sun hoods. 3. "Invisible" Lid. The lid can be completely hidden inside the hood, and perfectly fits to it. 4. Protect Screen, Button and Control Sticks. Prevent screen and buttons from scratches and bumps. 5. The equipped screw hooks help fixing the controller cover, and make it easier to use neck straps. 6. No Need to Remove Control Sticks. 7. Material: Plastic 8. Net weight: 100g

Read more less

Features1. The illuminated tripod is specially designed for DJI Mini 4 Pro drone. It fits the curved surface of the Mini 4 Pro body very well and has a hollow carving design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes. It can help you better observe your surroundings when you are flying or taking off or landing in the dark night. 2. Yellow, green and blue mixed color lights, 3 flashing modes, fast flashing mode, slow flashing mode and constant light mode. 3. The luminous tripod can increase the distance between the bottom of the Mini 4 Pro and the ground by 20 mm. When the Mini 4 Pro is used at night or on overgrown or bumpy gravel roads, it can reduce the impact and make it easier for no one to use it. The drone lands smoothly, preventing ground debris or water stains from soiling or damaging the drone body, gimbal, sensors and propellers, providing safe landing protection. 4. Built-in battery, rechargeable and reusable, the charging time is about 30 minutes, and the use time after full charge is about 60 minutes. 5. Lightweight design. The light-emitting tripod weighs only 18.5 grams and can stably carry the fuselage. The lightweight design will not add extra burden to the Mini 4 Pro flight and will not shake or fall off during flight. It also adopts a foldable and quick-release design that will not damage the drone body, is easy to install, and improves portability.Package List1. LED Light Heightened Rack x 1 2. Charging cable x 1 3. Instruction manual x 1 4. Color box x 1

Read more less

Features1. Suitable for drones, remote control cars, outdoor sports, etc. It is only 1.5 inches in size and weighs 11g. 2. Quick and non-destructive installation design, three fixing devices: glue, silicone ring, and Hook and Loop Fastener, can be freely attached to any suitable object such as drones, remote control cars, bicycles, motorcycles, helmets, etc. 3. Use 6 high-brightness LED lamp beads and select high-transparency and high-brightness shell materials, including 4 white light lamp beads, 1 red and 1 green lamp bead; It has a variety of different modes, single color always on, single color slow Flash (flash once every 1000ms, the same frequency as civil aviation), single-color fast flash (flash once every 500ms), two-color cycle, and three-color breathing cycle modes to meet your lighting preferences. 4. With memory function, the lighting mode before shutting down will be retained after shutting down. 5. Complying with FAA federal regulations, it provides 360-degree visibility and visibility of more than 3 miles for drones, making it easy to identify the direction and direction of drones. This is an essential small strobe light that helps improve the warning and visibility of objects. Identification helps prevent collisions and accidents. 6. It has a low battery reminder function. After shutting down, the green light flashes to indicate that the battery power is lower than 3.6V. Built-in rechargeable battery, rechargeable and reusable, the charging time is about 90 minutes, and the use time after full charge is about 4 hours (flash mode).Package List1. Strobe light x 1 2. Rubber ring x 2 3. Hook and Loop Fastene x 2 4. Adhesive x 2 5. Charging cable x 1 6. Instruction manual x 1

Read more less

1. The total weight of this night flight light alone bracket is about 28g, ultra-light weight basically does not affect the flight2. Top DIY bracket and both sides of the flashlight bracket search angle can be adjusted, so that the flight has more visual angles3. High brightness flashlight mounting bracket is reserved on the top, supporting flashlights with diameter 21-27mm (not included)4. The flashlight mounting brackets on both sides support flashlights with a diameter of 18-24mm5. Sponges are attached to the fuselage to protect the drone and make it easy to install6. The flashlight adopts XPE-R3 light-emitting element with 120LM brightness, long service life and high brightness7. The flashlight power supply: 1 x AA battery (not included), convenient and energy-saving8. Weight: about 80 grams9. Size: about 12 x 12 x 2.5cm10. Note: the product only includes the night light bracket and black flashlight, does not include the demonstration of the top of the silver high brightness flashlight and the demonstration of the drone

Read more less

Features1. Specially designed for DJI Mini 4 Pro. It fits the Mini 4 Pro very well. The split tripod design will not block the indicator light, fill light, bottom sensor and heat dissipation hole. It will not open obstacle avoidance and can be used with the STARTRC paddle. Install and use together. 2. Can effectively increase the distance between the drone and the ground by 20 mm. When the Mini 4 Pro takes off or lands on uneven ground, it can reduce the impact force, allowing the drone to land smoothly, and protect the Mini 4 Pros body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the Mini 4 Pro drone ability to adapt to the ground environment during takeoff and landing. 3. Adopting a split quick-release design, the battery can be quickly replaced without disassembly. After disassembly, it is easy to store and carry. It can be stored in the original bag, STARTRC special bag and most bags on the market. 4. Lightweight materials and lightweight design, the entire landing gear weighs only 11g. The lightweight design will not add extra burden to the Mini 4 Pros flight, and it will not shake or fall off during flight. 5. Size: front leg 16.5 x 60 x 46mm, rear leg 24.5 x 59 x 36mmPackage List1. Training Rack 1 x 1 2. Training Rack 2 x 1 3. Training Rack 3 x 1 4. Training Rack 4 x 1 5. Instruction card x 1 6. Color box x 1

Read more less

1. Mesh bag: can store propeller, charging cable, screwdriver and other accessories2. Remote control organizer can hold batteries at the bottom3. Double zipper design, easy to open and close4. Detachable shoulder strap, adjustable length5. Handheld or shoulder strap, comfortable to carry, easy to travel6. Can organize drone, remote control, batteries (not included)7. Weight: standard version of about 508.9g, with screen version of about 524.6g8. Size: about 26.5 x 20.5 x 10.5cm9. Description: only the organizer bag, does not include the drone, remote control, batteries, etc. in the picture

Read more less

1. Compatible models: suitable for DJI Mini 22. Easy to control: One-button operation on the remote control, and the remote control range of the delivery device is the same as that of the drone remote control.3. Simple structure: 30% lighter than old throwers, convenient size and easy to install4. Built-in battery, charging time is about 50 minutes, can work continuously for 5 hours5. Usage: Fishing bait, drone line release, flower throwing, advertising, lead guidance, party celebrations, marriage proposals, search and rescue.Specification:1. Built-in battery capacity: 80 mAh2. Remote control distance: 30-40m3. Charging interface: Mirco USB4. Maximum load: 90g5. Product weight: 38gPacking list:Mini 2 connector x 1Thrower x 1Remote control x 1O-ring x 2Tripod x 2Throwing line x 2Screws x 4Screwdriver x 1Mirco USB charging cable x 1

Read more less

1. The effective height increase is about 34mm, and it can still land under the uneven ground environment2. One-piece design, can effectively improve the aircraft in the takeoff and landing on the ground environment has a very good adaptability3. It can avoid the ground debris dirtying the fuselage or damaging the gimbal during takeoff and landing4. Foldable design, small and lightweight, easy to carry5. Quick installation and disassembly, anti-collision protection6. Material: plastic7. Weight: about 29 grams8. Size: about 12.5 x 8 x 1.5cm9. Note: the product only includes the stand, does not include the demo drone

Read more less

1. Reduce the wear and tear of the tripod and chassis, effectively increase the height by 25mm, prevent scratching the fuselage and gimbal, and can still take off and land under uneven ground conditions2. Lightweight and stable frame, can stably carry the fuselage, almost does not affect the flight and endurance3. Can be used as a mirror to the end of the bracket, handheld takeoff and landing5. Triangular reinforcement design around the perimeter for more stable support6. Front and rear use snap-on independent mounting, stable hook front and rear arms, stronger force, more stable7. The tripod is designed to lie on the outside, 90 degrees downward shooting will not shoot the tripod8. Easy to install, quick release and quick install, pay attention to differentiate the tripod serial number9. Weight: about 21.8 grams10. Size: about 14 x 7.9 x 1.9cm11. Note: shipment includes only 2 tripods, does not include the demonstration droneInstallation steps:1. Hook the booster leg (R1) onto the right front arm2. Hold the kickstand and gently push the rear right arm forward, then hook the kickstand (R2) backward3. Install the left side booster leg as the right side to complete the installation

Read more less

1. Can still land in uneven ground environment2. One-piece design, which effectively improves the aircrafts adaptability to the ground environment during takeoff and landing, avoiding debris on the ground from dirtying the aircraft or damaging the lens3. Lightweight design, does not affect the flight endurance4. Precise fit, quick installation and removal, wear-resistant and durable5. Foldable design, convenient storage6. Material: plastic7. Size: 8 x 5.6 x 1.5cm8. Weight: about 10.8g9. Note: the product only includes the stand, does not include the demo drone

Read more less

1. Effectively increase the height, in the uneven ground environment can still be landed2. Integrated design, can effectively improve the aircraft in the takeoff and landing on the ground environment adaptability3. Avoid ground debris dirtying the fuselage or damaging the gimbal during takeoff and landing4. Foldable design, compact and lightweight, easy to carry5. Quick installation and disassembly, anti-collision protection6. Material: plastic7. Weight: about 23 grams8. Note: the product only includes the bracket, does not include the demo drone

Read more less

1. The total weight of this night light bracket and flashlight without battery is about 60g, the drone can fly normally after installation2. Adopt the screw adjustment method, the flashlight angle can be easily adjusted, so that the flight has more probing angle3. The bracket is 3D printed and molded, made of plastic, with a sponge attached to the contact part of the fuselage, effectively protecting the drone from scratches, and easy to install4. Using XPE-R3 lamp beads, brightness 120LM, long service life, high brightness, compact size, easy to install5. Power supply: 1 AAA battery (not included)6. Packing: bubble bag7. Weight: about 60g8. Size: 11 x 11 x 2cm9. Note: the product only contains the night light bracket and night light, does not contain batteries, does not include the demonstration of the drone

Read more less

1. Multi-purpose in one package, the hard shell backpack contains a custom-cut high-density EVA liner, suitable for DJI Mini 4 Pro / Mini 3 Pro / Mini 3 / Air 3 / Mavic 3 Pro / Mavic 3 / Mavic 3 Classic. Version. 2. Different from soft backpacks, it uses a sturdy and durable EVA hard front shell and PU leather material, which is waterproof, splash-proof, anti-scratch, anti-squeeze, anti-bump, and anti-fall. The high-quality EVA liner can fit snugly and better protect your DJI drone and accessories. The back is made of mesh elastic foam padding to prevent vibration. The zipper is also designed to be waterproof, which can cope with sudden splashes or light rain, and the alloy zipper will not rust or get stuck. 3. Anti-drop design, with 2 additional adjustment buckles on both sides, which can tightly fasten the EVA hard front shell to ensure the safety of built-in items. Put the backpack on your chest and it can be turned into an operating platform, which can be adjusted 120 degrees and can be used to retrieve items and fly at any time. 4. Adjustable shoulder straps, chest straps and waist straps are suitable for everyone to carry the drone for travel and outdoor activities. Two handle designs can adapt to a variety of carrying habits. The backpack adopts a shock-absorbing breathable system, honeycomb back panel, highly elastic materials, and conforms to ergonomic design principles to protect the spine and make it comfortable to carry. The portable hard shell backpack brings a more shocking, superior and comfortable feeling. You can carry the drone to mountains, buildings and the seaside. No matter what scenery you want to see through the drone, you can carry it on your back. 5. The interior of the hard front shell is designed with magic tape and can be attached to fabric. Take out the customized lining and customize it according to your imagination. The layout can be flexibly configured to accommodate different types of equipment. The back is designed with three sizes of dividers that can accommodate a 16.5-inch laptop, allowing users to use the laptop to quickly store, edit and share photos and videos at any time.

Read more less

1. Mesh bag: can store propeller, charging cable, screwdriver and other accessories2. Remote control organizer can hold batteries at the bottom3. Double zipper design, easy to open and close4. Detachable shoulder strap, adjustable length5. Handheld or shoulder strap, comfortable to carry, easy to travel6. Can organize drone, remote control, batteries (not included)7. Weight: standard version of about 508.9g, with screen version of about 524.6g8. Size: about 26.5 x 20.5 x 10.5cm9. Description: only the organizer bag, does not include the drone, remote control, batteries, etc. in the picture

Read more less

1. The 100W USB-C battery charger has two USB-C output ports and can quickly charge DJI Mavic 3 series/Air 3/Mini series smart flight batteries, DJI remote controllers and other devices with USB-C ports.2. With powerful 100W output, this power adapter can charge the smart flight battery and remote controller at the same time, saving you valuable time and ensuring you are always ready to fly.3. Equipped with overvoltage and overcurrent protection to protect your device from damage and ensure a stable and reliable charging experience.4. Wide compatibility: Applicable to a range of DJI products, such as DJI Mavic 3 Pro, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Air 3, DJI Mini 4 Pro, DJI Mini 3, DJI Mini 3 Pro , DJI Mini 2 SE, DJI Mini 2, DI Mini SE, Mavic Mini, DJI remote control, DJI Avata, DJI Goggles 2 battery, and other USB-C port devices.5. Support PPS and PD fast charging protocolsParameter:1. Input voltage: 100V to 240V (AC), 50Hz to 60Hz, 2.5A2. USB-C1 output: 100W (Max)3. USB-C2 output: 100W (Max)4. Total output power: 100W (Max). When used simultaneously, the maximum output power of one interface is 82W and the maximum output power of the other interface is 18W. The charger will dynamically allocate the output power of the two interfaces based on the load power.5. Working environment temperature: 5-40 degrees Celsius6. Product size: 73.5 X 70 X 32mm7. Product net weight: 268+/-5g8. Charging time:--For DJI Mavic3 smart flight battery: about 1 hour and 10 minutes--For DJI RC-N1 remote control: about 2 hours and 40 minutes--For DJI RC remote control: about 2 hours--For DJI RC Pro remote control: about 2 hours--For DJI RC Pro Industrial Edition remote control: about 1 hour and 30 minutes--For DJI Avata Intelligent Flight Battery: about 47 minutes--For DJI Goggles 2 battery: about 1 hour and 50 minutes(When two charging interfaces are charging at the same time, the charging time will be slightly longer, please wait patiently. The charging time is measured in an experimental environment (room temperature 25 degrees Celsius) and is for reference only.)Packing list:100W battery charger x 1AC power cord x 1USB-C to USB-C cable x 1

Read more less

1. The 100W USB-C battery charger has two USB-C output ports and can quickly charge DJI Mavic 3 series/Air 3/Mini series smart flight batteries, DJI remote controllers and other devices with USB-C ports.2. With powerful 100W output, this power adapter can charge the smart flight battery and remote controller at the same time, saving you valuable time and ensuring you are always ready to fly.3. Equipped with overvoltage and overcurrent protection to protect your device from damage and ensure a stable and reliable charging experience.4. Wide compatibility: Applicable to a range of DJI products, such as DJI Mavic 3 Pro, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Air 3, DJI Mini 4 Pro, DJI Mini 3, DJI Mini 3 Pro , DJI Mini 2 SE, DJI Mini 2, DI Mini SE, Mavic Mini, DJI remote control, DJI Avata, DJI Goggles 2 battery, and other USB-C port devices.5. Support PPS and PD fast charging protocolsParameter:1. Input voltage: 100V to 240V (AC), 50Hz to 60Hz, 2.5A2. USB-C1 output: 100W (Max)3. USB-C2 output: 100W (Max)4. Total output power: 100W (Max). When used simultaneously, the maximum output power of one interface is 82W and the maximum output power of the other interface is 18W. The charger will dynamically allocate the output power of the two interfaces based on the load power.5. Working environment temperature: 5-40 degrees Celsius6. Product size: 73.5 X 70 X 32mm7. Product net weight: 268+/-5g8. Charging time:--For DJI Mavic3 smart flight battery: about 1 hour and 10 minutes--For DJI RC-N1 remote control: about 2 hours and 40 minutes--For DJI RC remote control: about 2 hours--For DJI RC Pro remote control: about 2 hours--For DJI RC Pro Industrial Edition remote control: about 1 hour and 30 minutes--For DJI Avata Intelligent Flight Battery: about 47 minutes--For DJI Goggles 2 battery: about 1 hour and 50 minutes(When two charging interfaces are charging at the same time, the charging time will be slightly longer, please wait patiently. The charging time is measured in an experimental environment (room temperature 25 degrees Celsius) and is for reference only.)Packing list:100W battery charger x 1AC power cord x 1USB-C to USB-C cable x 1

Read more less

1. 100W high power input, can charge three batteries at the same time2. LED lighting, 1-5 levels of brightness can be switched cyclically, and can be used in multiple scenes and for multiple purposes, meeting the needs of outdoor adventure and night flights. (Press and hold the light button for more than 2S to turn on the LED light. The default brightness mode is the second level. The fifth level is the strobe mode. Press and hold the light button for more than 2S to turn off the LED light.)3. SOS reminder: Using dynamic SOS intelligent algorithm, as the battery power decreases, the interval between calls for help is lengthened, ensuring longer calls for help.4. Intelligently detects the battery power and charges three batteries at the same time, which is efficient and time-saving, and will give priority to charging the battery with the highest capacity.5. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections6. LED indicator light to check battery power more accurately7. One-key storage function: Press and hold the function button for more than 2 seconds while charging to turn on the 60% storage mode. Convenient for travel, air transportation, and storage when not in use for a long time.8. Suitable for DJI Mini 4 Pro / Mini 3 series batteries, and supports PD fast charging protocol. The USB-A port can also quickly charge other digital devices.parameter:1. Input (USB-C): 5V 3A/9V 3A/12V 3A/15V 3A/20V 3.25A/20V 5A2. Charging power: 100W (Max)3. Output (USB-A): 5V 2A, 10W (Max)4. Charging method: charge three batteries at the same time5. Compatible battery: Suitable for DJI Mini 3 series smart flight batteries, DJI Mini 4 Pro smart flight batteries, DJI Mini 4 Pro/Mini 3 series long-life smart flight batteries6. Adaptation charger: It is recommended to use 65W/100W PD protocol charger7. LED lighting function: supported8. Call for help reminder function: supported9. One-click storage mode: supported10. Battery display: supported11. Working environment temperature: 5-40 degrees Celsius12. Dimensions: 100 x 54 x 55mm

Read more less

1. The self-balancing strap system suitable for DJI RC/RC 2 remote controllers with screen. By matching the shoulder strap with components, you can free your hands and keep the screen control always facing up.2. The shape fits and coordinates with the body, and the design is reasonable without blocking the screen or affecting signal transmission.3. The shoulder strap is made of super-fiber double-layer leather with exquisite stitching, making it comfortable to wear without strangling your neck.4. Electroplated aluminum alloy buckles, tightly installed, strong and durable and will not fall off5. Three detachable buckles, lightweight design allows you to travel easily6. The high-density woven belt is wear-resistant and the length of the lanyard can be adjusted to meet the wearing needs of most people.7. Material: PU leather + calfskin + nylon8. Adjustable range: 13-23 cm9. Dimensions: length 142cm, width 3.5cm, thickness 0.35cm10. Net weight: 95.2g

Read more less

1. 200W Air 3 3-channel charging manager, supports 2 100W inputs. In standard mode, the first battery is fully charged in 60 minutes, and the three batteries are fully charged in 80 minutes; in fast charging mode, the first battery is fully charged in 40 minutes, and the three batteries are fully charged in 60 minutes. (The above charging time is based on the Charging Manager with two LKTOP 100W desktop chargers, and the initial battery capacity is 0-10%. The charging test data is measured in a laboratory environment (room temperature 25 degrees Celsius) and is for reference only. .)2. With built-in screen display function, you can view each battery’s information, voltage, capacity, temperature, number of cycles, power, etc.3. Exquisite and compact design, the contact area between the battery and the charging compartment is small, and the battery is suspended on all sides for good heat dissipation, which delays the battery lifespan.4. Three charging modes are available: the charging butler has three modes: 100% standard mode, 95% fast charging mode, and 60% storage mode to meet different needs.5. Power bank output mode: When the USB-C input port is not connected to the power supply, insert the battery, long press the function button to turn on the phone, enter the power bank output mode, and connect a mobile phone or other digital device to the USB-C output port. 6. Power collection function: The charging butler has a power collection function that concentrates the remaining power in multiple low-power batteries into a battery with high remaining power, allowing you to use one more battery.7. Power balancing function: The charging butler has a power balancing function. The power balancing function is to distribute the power in high-power batteries to other low-power batteries, so that all batteries have the same power, and energy is recycled without waste, which is convenient for long-term storage and aviation. Transportation etc.8. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protectionsParameter:1. Applicable battery model: suitable foe DJI Air 3 intelligent flight battery (BWX233-4241-14.76)2. Working temperature: 5-40 degrees Celsius3. USB-C1/C2 input: 9-20V--5V 100W Max4. USB-C1+USB-C2 input: 200W Max5. USB-C output: 5-15V-3A 45W Max6. USB-C1/C2 protocol: C port input supports PD fast charging protocol, with power greater than 18W7. Maximum charging power of each battery: 17V-5A 80W Max8. Recommended power adapter: 100W/65W charger9. Product size: approximately 164×61×52mm (product host)10. Product weight: about 158g (excluding wire weight)

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.5g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC-N1/RC-N2 remote control6. Size: 2.2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Using gallium nitride technology, it can increase charging speed and be smaller in size.2. It has two output interfaces, USB-C and USB-A, which can charge the battery and remote control at the same time.3. Supports PPS and PD protocols, and can also charge your mobile phones, computers and other devices.4. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections, super fast charging also brings more safety.Technical Parameters:1. Input voltage: 100-240 V, 50/60 Hz, 2A2. Output parameters:--Type-C: 5V/9V/12V/15V-3A, 20V-3.25A (65W Max)--USB-A: 5V-2.4A, 9V-2A, 12V-1.5A (18W Max)--Type-C+USB-A: Type-C: 5V/9V/12V/15V-3A, 20V-2.25A (45W Max); USB-A: 5V-2.4A, 9V-2A, 12V-1A ( 18W Max)3. Rated power: 65W4. Operating ambient temperature: 5- 40 degrees Celsius5. Charging time:--Intelligent flight battery: about 1 hour 36 minutes--For DJI RC Pro remote controller: about 1 hour and 30 minutes (USB-C interface) (Note: When charging the intelligent flight battery and remote controller or other mobile devices at the same time, the charging time will be slightly longer, please be patient.)Compatible products:--For DJI Mavic 3--For DJI Mavic 3 Cine--For DJI Mavic Mini 2--For DJI Mavic Mini SEPacking list:65W portable charger × 10.5m Type-C data cable x 1

Read more less

1. 100W gallium nitride multi-port charger, lightning fast charging, saving time and worry, high energy efficiency conversion rate, low loss, not easy to get hot when charging, more suitable for charging drones, action cameras, and handheld shooting equipment products.2. 3 USB-C+1 USB-A port output, intelligent identification and distribution of power, safe charging without damaging the machine3. 90-degree folding plug, easy to carry4. Built-in multiple safety protections, with over-current, over-voltage, over-temperature and other protections, no screen skipping, no screen flickering, and battery protection to protect your charging process. Super fast charging also brings more safety.Parameter:1. Interface: Type-C1/C2/C3/USB-A2. Input: 100-240V 50/60Hz 2A3. Type-C1/C2 output: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A (100WMax)4. Type-C3 output: 5V=3A, 9V=3A, 12V2.5A, 15V-2A, 20V-1.5A (30W Max)5. USB-A output: 5V-3A, 9V-3A, 12V-2.5A, 20V-1.5A (30W Max)6. Total output power: 100W Max7. Product size: 85 X 61 X 28.5mm8. Net weight: 220+/-5gApplicable models:--For DJI Mavic 3 Pro/DJI Mavic 3 Pro Cine--For DJI Mavic 3 Classic/DJI Mavic 3--For DJI Mavic 3 Cine/DJI Mavic 3 Industry Series--For DJI Air 3/DJI Avata/DJI Goggles 2 batteries--For DJI Air 3 Charging Manager/DJI Mavic 3 Series 100W Charging Manager--For DJI Mini 3, DJI Mini 3 Pro, DJI Mini 4 Pro/Mini 3 series two-way charging manager (DJI Mini 3/Mini 3 Pro/Mini 4 Pro smart flight battery supports up to 30W input)--Support other fast charging protocols (PD/QC/PPS, etc.) electronic equipment

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.5g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC-N1/RC-N2 remote control6. Size: 2.2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 2.3g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: Applicable to DJI RC/RC 2 remote controller6. Size: 1.8 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers.3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories.4. Two-way metal zipper design, the zipper closes smoothly and does not get stuck.5. Detachable strap, the length of the strap is adjustable and can be carried by hand or cross-body when traveling.6. Material: Nylon/PU+Lycra7. Dimensions: 32 x 31 x 11.5cm8. Weight: nylon model is about 882g, PU model is about 813g9. Only the storage bag is shipped, and the displayed drone and other accessories are not included.

Read more less

1. Specially designed for small drones with cameras, suitable for DJI Mavic Pro/ Platinum / Mavic Air / Mavic 2 Pro/Zoom, DJI Air 2S, DJI Avata, DJI Mini 2/SE/MINI 3 Pro, Mavic Air 2. DJI Spark/Tello, Xiaomi FIMI drone, GoPro Karma, Parrot Anafi drone, etc.2. The unfolded size is 50cm/65cm and can be folded for easy portability.3. Made of waterproof PU leather material with anti-fouling function, making the landing pad easy to clean.4. High-precision printing, outdoor ink, waterproof and sun-proof, not easy to fade, double-sided and two-color design, suitable for a variety of environments, highlighting the take-off and landing positions5. Material: PU6. Weight: 50cm/450g, 65cm/739g

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.5g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC-N1/RC-N2 remote control6. Size: 2.2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.2g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC Pro remote control6. Size: 2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 2.3g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: Applicable to DJI RC/RC 2 remote controller6. Size: 1.8 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 2.3g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC/RC 2 remote controller6. Size: 1.8 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. 9H high hardness tempered glass;2. Anti-scratch, anti-explosion, effectively protect the camera;3. High definition, high light transmittance, easy to install without bubbles.4. Main material: tempered glass5. Attribute: Transparent6. Net weight: 2.7g (1 set), 4.6g (2 sets)7. Product size: 1.5 x 1.5cm (lens film), 0.9 x 0.9cm (sensor film)Packing list:1 set: lens film x 2, sensor film x 2, alcohol bag x 1, cleaning cloth x 1, dust removal sticker x 12 sets: lens film x 4, sensor film x 4, alcohol pack x 2, cleaning cloth x 2, dust removal sticker x 2

Read more less

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers.3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories.4. Two-way metal zipper design, the zipper closes smoothly and does not get stuck.5. Detachable strap, the length of the strap is adjustable and can be carried by hand or cross-body when traveling.6. Material: Nylon/PU+Lycra7. Dimensions: 32 x 31 x 11.5cm8. Weight: nylon model is about 882g, PU model is about 813g9. Only the storage bag is shipped, and the displayed drone and other accessories are not included.

Read more less

1. 9H high hardness tempered glass;2. Anti-scratch, anti-explosion, effectively protect the camera;3. High definition, high light transmittance, easy to install without bubbles.4. Main material: tempered glass5. Attribute: Transparent6. Net weight: 2.7g (1 set), 4.6g (2 sets)7. Product size: 1.5 x 1.5cm (lens film), 0.9 x 0.9cm (sensor film)Packing list:1 set: lens film x 2, sensor film x 2, alcohol bag x 1, cleaning cloth x 1, dust removal sticker x 12 sets: lens film x 4, sensor film x 4, alcohol pack x 2, cleaning cloth x 2, dust removal sticker x 2

Read more less

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers.3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories.4. Two-way metal zipper design, the zipper pulls smoothly and does not get stuck.5. Detachable strap, the length of the strap is adjustable, it can be carried by hand or cross-body when traveling.6. Material: Nylon/PU+Lycra7. Dimensions: 30.5 x 22 x 11.5cm8. Weight: nylon model is about 642g, PU model is about 616g9. Only the storage bag is shipped, and the displayed drone and other accessories are not included.

Read more less

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers.3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories.4. Two-way metal zipper design, the zipper pulls smoothly and does not get stuck.5. Detachable strap, the length of the strap is adjustable, it can be carried by hand or cross-body when traveling.6. Material: Nylon/PU+Lycra7. Dimensions: 30.5 x 22 x 11.5cm8. Weight: nylon model is about 642g, PU model is about 616g9. Only the storage bag is shipped, and the displayed drone and other accessories are not included.

Read more less

1. Heightened landing gear for Mini 4 Pro, effectively increasing the fuselage by 14mm to prevent ground debris from contaminating the fuselage and sensors during takeoff and landing.2. It can still take off and land on uneven ground, effectively protecting the safety of the fuselage;3. Light weight does not affect flight, triangular structure design, stable and not easy to fall off;4. Quick-release design, easy to install and remove.5. Main material: ABS6. Net weight: 20g7. Product size: 7 x 2.3 x 1.8cm (front feet), 5.1 x 4.6 x 2.5cm (rear feet)Packing list:Nose landing gear x 2Rear landing gear x 2

Read more less

1. High-quality alloy double sliders, two-way opening and closing are smooth and non-stuck.2. Wear-resistant nylon shell, scratch-resistant, wear-resistant and splash-proof3. Plastic handle, easy to carry4. Capacity: can store the body, RC 2 or RC N2 remote control, original battery manager (not compatible with the sub-factory), 3 batteries (4 in total with the body), original filter box, rocker, paddles , charging head, data cable, etc.5. Compatible models: Applicable to DJI MINI 4 PRO6. Material: shell cloth + EVA, liner pearl cotton7. Size: approx. 27 x 27 x 11cm8. Weight: about 742g

Read more less

1. Water-repellent fabric has a certain barrier effect when exposed to water in a short period of time, so you don’t have to worry about the contents of the bag getting wet.2. The inside of the bag is equipped with a shock-proof EVA sponge lining design, which can accommodate items such as the drone body and accessories.3. Webbing handle, easy to carry4. Material: nylon shell, EVA liner5. Size: approx. 29 x 22 x 10cm6. Weight: about 450g7. Note: The product is only a storage bag and does not include other items.

Read more less

1. Large-capacity partitioned storage, which can hold the body, RC 2 or RC-N2 remote control, original battery manager, 7 batteries, paddles, rockers, charging heads and data cables, etc.2. Webbing handle, easy to carry3. The EVA upper cover has a little hardness for better protection, and the EVA liner has high hardness and is not easily deformed.4. Real machine molded EVA liner, very good protective equipment5. Applicable models: Applicable to DJI Mini 4 Pro6. Material: outer shell film material + EVA, inner tank EVA7. Size: approx. 36 x 26.5 x 11.5cm8. Weight: about 760gNote: The product is only a storage bag and does not include other items

Read more less

1. ABS+PC hard shell case, good protection performance2. The back cover has a compartment that can hold a thin laptop or tablet.3. The EVA liners fixing equipment does not shift, preventing friction and bruises, and has high hardness and is not easily deformed.4. Two-way smooth metal slider, easy to use and beautiful5. Encrypted mesh on the back, comfortable, breathable and pressure-free6. The soft handle is reinforced with dates and does not pinch your hand.7. Capacity: Can hold the body, RC 2 or RC N2 remote control, original battery manager (the one from the subsidiary factory cannot be accommodated), 4 batteries (including 1 body), filter box, battery manager, and propeller data Line, rocker, etc.8. Suitable for DJI Mini 4 Pro drone9. Material: shell upper cover ABS+PC, inner tank EVA10. Size: approx. 32 x 22 x 12cm11. Weight: about 785g

Read more less

1. Compatible with a variety of remote controls. Suitable for DJI RC 2/1, RC-N2/1, RC PRO, and screen remote controls. 2. Multifunctional desktop stand. It can also be used for ROG ALLY, Steam Deck, Switch, tablets, and mobile phone desktop stands to satisfy you who love to play. 3. Relieve hand pressure and free up space in your hands. 4. Anti-slip protective rubber pad, soft, anti-slip and anti-scratch, protects the machine. 5. Material: Plastic 6. Product size: 116x102x65mm 7. Net weight: 61g

Read more less

1. Four-in-one multi-functional stand, one thing with multiple uses. It can be used as a portable handle, belly support, lanyard buckle, or desktop stand to make your remote control more comfortable and convenient to use. 2. The angle can be rotated freely and the functions can be switched at will. 3. CNC precision-machined aluminum alloy buckle, high strength and hardness, durable and more secure. 4. Three-hole multi-purpose hanging buckle, single and double buckle lanyards can be switched at will. 5. High-quality leather lanyard, low-key matte texture, delicate feel; precision craftsmanship, safe and reliable. 6. Material: aluminum alloy + PU leather 7. Folded length: 62.5-80cm

Read more less

1. Alloy double zipper, wear-resistant and waterproof2. Plastic handle, easy to carry3. Precisely molded inner bladder, neither loose nor tight4. Shock-absorbing and compression-resistant, effectively protecting your device from normal scratches, dirt, tears and wear5. Material: shell PU+EVA, inner tank EVA6. Capacity: Can hold 1 host, filter, 1 RC 2 remote control or RC N2 remote control, 1 charger, and 1 battery manager (battery cannot be placed in the battery manager), 3 batteries (including 1 on the body), propellers7. Size: approx. 29 x 23 x 11cm8. Weight: about 700gNote: Storage bag only, no others included

Read more less

1. Four-in-one multi-functional stand, one thing with multiple uses. It can be used as a portable handle, belly support, lanyard buckle, or desktop stand to make your remote control more comfortable and convenient to use. 2. The angle can be rotated freely and the functions can be switched at will. 3. CNC precision-machined aluminum alloy buckle, high strength and hardness, durable and more secure. 4. Three-hole multi-purpose hanging buckle, single and double buckle lanyards can be switched at will. 5. High-quality leather lanyard, low-key matte texture, delicate feel; precision craftsmanship, safe and reliable. 6. Material: aluminum alloy + PU leather 7. Folded length: 62.5-80cm

Read more less

1. Powerful processor: DJI RC 2 is equipped with a powerful processor that features improved CPU and GPU performance. This ensures ultra-smooth app and system operation, delivering a seamless and intuitive control experience with every flight.2. Video transmission system: The next-gen DJI O4 video transmission technology supports 2.4GHz, 5.1GHz, and 5.8GHz frequency bands, providing DJI RC 2 with enhanced anti-interference capabilities. When paired with drones that are compatible with O4, such as DJI Air 3, DJI RC 2 can achieve HD low-latency video transmission within a 20km max range. 3. 2T4R antennas: DJI RC 2 integrates two built-in and two external antennas, supporting a 2T4R system. This doubles the number of both transmitter and receiver antennas compared to the previous generation DJI RC, enhancing signal strength and further improving transmission performance for smooth control and safer flight.4. FHD screen: DJI RC 2 features a 5.5-inch 1920×1080 built-in FHD screen capable of maintaining 700 nits of high brightness.5. Storage capacity:DJI RC 2 comes with 32 GB of built-in storage, allowing for direct screen recording and caching. It also supports microSD card expansion for an additional storage option.(The actual available storage space is approximately 21 GB.)6. Light and compact: Even with improved processing and video transmission performance, added antennas, and an active-cooling design, DJI RC 2 weighs just 420 grams. This ensures a comfortable grip and effortless control, especially during extended use.Compatibility:DJI Air 3DJI Mini 4 ProPacking list:DJI RC 2 ×1

Read more less

1. The lightweight DJI Mini 2 360° Propeller Guard fully protects the propellers and improves flight safety. 2. The lightweight DJI Mini 2 360° Propeller Guard fully protects the propellers and improves flight safety. 3. With the propeller guard mounted, the maximum flight time is 18 minutes.4. Weight (one side): 23.5 g5. Radius: 71 mm6. Installation After Mounting: 318×267×66 mmCompatibility:DJI Mini 2 SEDJI Mini 2DJI Mini SETips:1. To ensure safety, please avoid any contact between the aircraft and yourself or others when the aircraft is powered on.2. Do not use the propeller guard in high altitudes (2000 m or higher) or in a windy environment.Packing list:360 Degree Propeller Guard (set) × 1

Read more less

1. A high-quality feel lanyard specially designed for DJI Pocket 3. It is also suitable for DJI AVATA 2 Motion 3 and FPV remote control 3. It can more conveniently control Pocket 3 and AVATA 2 drones when necessary. Freeing up your hands makes shooting and flying easier, while also providing safety for operation and transmission. 2. The lanyard is made of high-quality woven rope material, which has excellent comfort, durability and anti-bacterial properties. It is soft to the touch, breathable, highly hygroscopic, sweat-resistant and odor-resistant. 3. Using PU leather adjustable buckle design, you can easily adjust the length of the strap according to your own needs. The length of single side is up to 70cm and the single side is short to 40cm. It can be worn cross-body, hand-held, or hung around the neck, making it more convenient to carry. 4. Quick release design, it can be quickly removed in a few seconds, and can be easily put into most storage containers together with the Pocket 3/AVATA 2 Motion 3 and FPV remote control 3. No need to disassemble, easy to store, convenient and fast . 5. It has the same screen rotation accessory as pocket 3 for easy decompression.

Read more less