Live Equipment

1. Material: plastic, electronic components2. Applicable scene: household, computer, special recording, musical instrument3. Sensor: Capacitor4. Directivity: Cardioid5. Frequency response: 100Hz-20KHz6. Signal-to-noise ratio: greater than 60dB7. Connector: 3.5mm TRS/3.5mm TRRS8. Power supply: plug-in power supply9. Intelligent noise reduction system, restore the original sound10. Strengthen the recording of cardioid pointing, effectively identify the original sound of human voice in a large range of 0.5-3 meters11. High-buffering physical shock-absorbing bracket to reduce noise in vibration and maintain stable recording12. High-sensitivity wheat head, sharp pickup, restore the original sound13. High-density windproof cover to reduce noise14. Dimensions: 21.5 x 72mm15. Net weight: 35 grams

Read more less

Features1. Professional recording studio equipment: Equipped with this microphone, shock mount, pop filter, mic adjustable suspension scissor arm stand, anti-wind foam cap, power cable, sound card 2. High performance: Cardioid directional pickup, full bass, clear treble, high-fidelity output, corrosion-resistant built-in three-pin XLR interface, sound quality transmission barrier-free 3. Process design: Streamlined design, baking paint process, all-metal body anti-interference, large back-pole microphone 4. DSP noise reduction: There are dual DSP noise reduction chips inside the sound card voice changer to avoid the influence of current noise, ensure high quality sound, and sing beautiful songs, reverb (ECHO) makes your voice more charming 5. Low Noise: It features high signal-to-noise ratio (SNR) that means less distortion to be caused on the process of recording, Unique 3-layer protection system prevents unwanted pop noises, providing singers with a clear, plosive-free vocal performance 6. Usage scenarios: Support Android, iOS mobile phones, tablets, notebooks and many other devices, intelligently compatible with various K-song live APPsSpecification1. Directionality: Single direction 2. Microphone material: Steel mesh + zinc alloy tube body 3. Frequency response: 20Hz-20kHz 4. Sensitivity: 45dB +/-1db 5. Output impedance: 150 ohm +/-30% (1 kHz) 6. Load impedance: greater than or equal to 1000 ohms 7. Equivalent noise level: 16 dba 8. Signal-to-noise ratio: 78 decibels 9. Microphone output interface: 3.5mm 10. Cable length: 2.5 m 11. Power supply: 48V 12. Microphone size: 165mm long, 42mm handle diameter, 47mm head diameterPackage List1. Microphone x 1 2. Suspension Scissor Arm x 1 3. Plastis Shock Mount x 1 4. USB Sound Card x 1 5. Pop Filter x 1 6. Foam Cap x 1 7. XLR Cable x 1

Read more less

1. Full range pickup, wide frequency response, pure sound2. Studio-level circuit design makes the sound clearer and more stable3. 34mm large diaphragm, the sound is more delicate, the recording is softer and more magnetic4. Dazzling fluorescent background lighting effect, live broadcast is very cool5. Full metal grille, effectively reduce noise and airflow impact sound6. The main body is made of brass tin-plated nickel alloy to improve visual impact7. Three-core XLR gold-plated XLR interface to avoid problems such as poor contact8. Superbly designed shock mount to block noise and eliminate vibratoparameter:1. Capsule: 34mm2. Directivity: Cardioid3. Frequency response range: 20hz-20khz4. Sensitivity: -38+/-2dB5. Output impedance: less than or equal to 200 ohms6. Equivalent noise: 14dB7. SPL: 125dB, 0.5% THD8. Signal-to-noise ratio: 76dB9. Cable requirements: three-core XLR cable10. Power requirements: 48V phantom power11. Size: Diameter 48 x 180mm12. Weight: 883 grams (with shock mount)packing list:Microphone x 1Metal shock mount x 1Blowout cover x 1Moisture-proof leather bag x 1Aviation aluminum case x 1Manual X1

Read more less

Features1. Professional recording studio equipment: Equipped with this microphone, shock mount, anti-wind foam cap 2. High performance: Cardioid directional pickup, full bass, clear treble, high-fidelity output, corrosion-resistant built-in three-pin XLR interface, sound quality transmission barrier-free 3. Process design: Streamlined design, baking paint process, all-metal body anti-interference, large back-pole microphone 4. The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic. 5. The shock mount can effectively reduce handling noise. Good cardioid pickup output and high sensitivity. 6. The ball-type anti-wind foam cap can protect microphone against wind interference and singers spit. 7. Ideal for radio broadcasting studio, voice-over sound studio, recording and so on.Specifications1. Directionality: Single direction 2. Microphone material: Steel mesh + zinc alloy tube body 3. Frequency response: 20Hz-20kHz 4. Sensitivity: 45dB +/-1db 5. Output impedance: 150 ohm +/-30% (1 kHz) 6. Load impedance: greater than or equal to 1000 ohms 7. Equivalent noise level: 16 dba 8. Signal-to-noise ratio: 78 decibels 9. Microphone output interface: 3.5mm 10. Cable length: 2.5m 11. Power supply: 48V

Read more less

1.Simple and fashionable design.2.Jamproof double-condenser capsule,360 degree sound pick-up.3.Metal microphone body,mini and light,easy to carry.4.Anti folding and tensile shielded cable with 1.8m,eliminate noise.5.Standard 3.5mm gold plated plug,prevent oxidation.6.Used for PC and mobile phone.7.Color:Black.

Read more less

1.Item type: computer microphone2.Material: ABS3.Pointing: omni directional4.Sensitivity: -30dB±3dB5.Frequency response: 100Hz to 16kHz6.Sampling rate: 48kHz7.Bit rate: 16bit8.Power supply voltage: USB 5V

Read more less

Features1. Adopts 2.4G frequency band, features stable signal transmission and 50m effective range, not easy to be interfered, ideal for film and vlog recording, live streaming, interview, etc. 2. Transmitters and receiver have been paired, just turn them on, then the transmitter and receiver will automatically link to the frequency within 3s, plug and play, without tedious debugging. 3. The transmitter has built-in microphone and supports omnidirectional pickup with clearer sound, also comes with an external lapel microphone, which allows users to record more flexibly. 4. The transmitter and receiver both have built-in rechargeable battery that can be charged via the provided USB cables, and working time is up to 8H after fully charging. 5. The receiver has real-time return monitoring interface, you can connect headphones to monitor the recording effect; backside clip design, can be fixed on collar easily and quickly.Specification1. Material: ABS 2. Applicable objects: home, computer, recording, phone, camera, camcorder 3. Signal transmission: 2.4GHz 4. Frequency response: 2.4 - 2.4835 KHZ 5. Charging time: about 2 Hours 6. Operating distance: 30m 7. Output method: 3.5mm Output & Type-C Output 8. Working time: 8-10H 9. Product size: 4.8x3x2cm

Read more less

Features1. Adopts 2.4G frequency band, features stable signal transmission and 50m effective range, not easy to be interfered, ideal for film and vlog recording, live streaming, interview, etc. 2. Transmitters and receiver have been paired, just turn them on, then the transmitter and receiver will automatically link to the frequency within 3s, plug and play, without tedious debugging. 3. The transmitter has built-in microphone and supports omnidirectional pickup with clearer sound, also comes with an external lapel microphone, which allows users to record more flexibly. 4. The transmitter and receiver both have built-in rechargeable battery that can be charged via the provided USB cables, and working time is up to 8H after fully charging. 5. The receiver has real-time return monitoring interface, you can connect headphones to monitor the recording effect; backside clip design, can be fixed on collar easily and quickly.Specification1. Material: ABS 2. Applicable objects: home, computer, recording, phone, camera, camcorder 3. Signal transmission: 2.4GHz 4. Frequency response: 2.4 - 2.4835 KHZ 5. Charging time: about 2 Hours 6. Operating distance: 30m 7. Output method: 3.5mm Output & Type-C Output 8. Working time: 8-10H 9. Product size: 4.8x3x2cm

Read more less

About this item:1. 【Plug & Play and Hands-Free】No Adapter/Addtional APP/ Bluetooth needed, just 2 steps to connect. Step 1: Plug the receiver into your devices; Step 2: Power on the microphones. Say goodbye to messy cables, and the wireless lapel lavalier microphones can be clipped on the collar to free your hands for audio video recording, make your live streaming more relaxed and enjoyable!2. 【360° full point pickup, recording every detail of sound】The Mini Wireless Microphone is a lapel microphone that you can carry around and receive clear, high-quality audio, designed for YouTube Live, Facebook Live, TikTok creators, influencers, meal broadcasts, teacher recorders, and more3. 【Superior Noise Reduction & Real-time Auto-sync】This omnidirectional wireless lavalier microphone is built with professional-grade intelligent noise reduction chips, providing effective identification of the original sound and clear recording in noisy environment. The real-time auto-sync technology extremely reduce the time of video post-editing, supporting a better experience in videos being watched.4. 【Long Distance Transmission & Long Battery Life】Upgraded wireless microphone transmission technology, 65 feet stable audio signal transmission without cable and harsh noises. The reciever is powered by your device(Can Be Charged At The Same Time), the transmitter built in rechargeable batteries works up to 4-6 hours.5. 【Warm Tips 】Please read the user manual and charge the wireless lavalier microphone before using it for the first time.This product is for live, video or audio recording only, and cannot be used for call or FaceTime,You need to take off the receiver to be able to hear the audio playback. Contact us if it doesn't work. Feel free to contact us if you have any questions.

Read more less

About this item:1. 【Plug & Play and Hands-Free】No Adapter/Addtional APP/ Bluetooth needed, just 2 steps to connect. Step 1: Plug the receiver into your devices; Step 2: Power on the microphones. Say goodbye to messy cables, and the wireless lapel lavalier microphones can be clipped on the collar to free your hands for audio video recording, make your live streaming more relaxed and enjoyable!2. 【360° full point pickup, recording every detail of sound】The Mini Wireless Microphone is a lapel microphone that you can carry around and receive clear, high-quality audio, designed for YouTube Live, Facebook Live, TikTok creators, influencers, meal broadcasts, teacher recorders, and more3. 【Superior Noise Reduction & Real-time Auto-sync】This omnidirectional wireless lavalier microphone is built with professional-grade intelligent noise reduction chips, providing effective identification of the original sound and clear recording in noisy environment. The real-time auto-sync technology extremely reduce the time of video post-editing, supporting a better experience in videos being watched.4. 【Long Distance Transmission & Long Battery Life】Upgraded wireless microphone transmission technology, 65 feet stable audio signal transmission without cable and harsh noises. The reciever is powered by your device(Can Be Charged At The Same Time), the transmitter built in rechargeable batteries works up to 4-6 hours.5. 【Warm Tips 】Please read the user manual and charge the wireless lavalier microphone before using it for the first time. This product is for live, video or audio recording only, and cannot be used for call or FaceTimeYou need to take off the receiver to be able to hear the audio playback. Contact us if it doesn't work. Feel free to contact us if you have any questions.

Read more less

1. Widely applicable, lossless recording. Suitable for video recording, interview recording, outdoor recording, etc. 2. The professional digital processing hybrid chip can further improve the original sound of the plum blossom and independently process the high, medium and low tone structure of the human voice. 3. Cardioid directional structure design, its pickup area is concentrated in front of the microphone axis, effectively separating the background noise of the main sound. 4. The windscreen is combined with the shock mount to reduce the impact of vibration and outdoor noise, and the recording is clearer. 5. Wide range of supported devices, simple and easy connection. 6. Parameters: Acoustic principle: pressure gradient Frequency range: 100Hz-20KHz Pole: 0.5 inches Pickup Pattern: Cardioid Sensitivity: -35dB Dimensions: 21 x 21 x 80mm Weight: 42g

Read more less

1. Plug & Play and Hands-Free: No Adapter/Addtional APP/ Bluetooth needed, just 2 steps to connect. Step 1: Plug the receiver into your devices; Step 2: Power on the microphones. Say goodbye to messy cables, and the wireless lapel lavalier microphones can be clipped on the collar to free your hands for audio video recording, make your live streaming more relaxed and enjoyable!2. Only Compatible with iOS 13~15.2: Our wireless lavalier microphone can work for iPhone 7/ 7 Plus, 8/8 Plus, X/XR/XS/XS Max, 11/11 Pro/11 Pro Max, 12/12 Pro, and iPad 2/3/4, iPad Air series, iPad Pro series (NOTE: the latest version of 11 inch and 12.9 inch iPad Pro with type-C port not supported).3. Superior Noise Reduction & Real-time Auto-sync: This omnidirectional wireless lavalier microphone is built with professional-grade intelligent noise reduction chips, providing effective identification of the original sound and clear recording in noisy environment. The real-time auto-sync technology extremely reduce the time of video post-editing, supporting a better experience in videos being watched.4. Long Distance Transmission & Long Battery Life: Upgraded wireless microphone transmission technology, 65 feet stable audio signal transmission without cable and harsh noises. The reciever is powered by your device(can be charged at the same time), the transmitter built in rechargeable batteries works up to 4-6 hours.5. Warm Tips: Please read the user manual and charge the wireless lavalier microphone before using it for the first time. This product is for live, video or audio recording only, but cannot be used for call or FaceTime.You need to take off the receiver to be able to hear the audio playback.

Read more less

1. Plug & Play and Hands-Free: No Adapter/Addtional APP/ Bluetooth needed, just 2 steps to connect. Step 1: Plug the receiver into your devices; Step 2: Power on the microphones. Say goodbye to messy cables, and the wireless lapel lavalier microphones can be clipped on the collar to free your hands for audio video recording, make your live streaming more relaxed and enjoyable!2. Only Compatible with iOS 13~15.2: Our wireless lavalier microphone can work for iPhone 7/ 7 Plus, 8/8 Plus, X/XR/XS/XS Max, 11/11 Pro/11 Pro Max, 12/12 Pro, and iPad 2/3/4, iPad Air series, iPad Pro series (NOTE: the latest version of 11 inch and 12.9 inch iPad Pro with type-C port not supported).3. Superior Noise Reduction & Real-time Auto-sync: This omnidirectional wireless lavalier microphone is built with professional-grade intelligent noise reduction chips, providing effective identification of the original sound and clear recording in noisy environment. The real-time auto-sync technology extremely reduce the time of video post-editing, supporting a better experience in videos being watched.4. Long Distance Transmission & Long Battery Life: Upgraded wireless microphone transmission technology, 65 feet stable audio signal transmission without cable and harsh noises. The reciever is powered by your device(can be charged at the same time), the transmitter built in rechargeable batteries works up to 4-6 hours.5. Warm Tips: Please read the user manual and charge the wireless lavalier microphone before using it for the first time. This product is for live, video or audio recording only, but cannot be used for call or FaceTime.You need to take off the receiver to be able to hear the audio playback.

Read more less

1. Product name: K18 Wireless Mini microphone 2. Frequency range: 2.4G 3. Frequency video range: 20-200khz 4. Sensitivity: -26dB 5. Signal-to-noise ratio: 64dBm 6. Transmission distance: 10 meters 7. Battery capacity: 80mAH 8. Input voltage: DC4.8~ 5.4V 9. Charging current: about 65mA 10. Working time: about 20H 11. Charging time: about 80min

Read more less

Description:1.Colorful LED Lights Design – the karaoke microphone use colorful LED lights 4-in-1 design, it as a microphone, speaker, player and recorder with the rhythm which is good for party, family singing, make you feel at the center of a mini KTV club.2.Superior Sound & Bluetooth Louder Speaker—Built-in 2 louder speakers, output power is 5w*2. Enjoy good clear sound, crisp high tones and supreme comfort3.Newly Upgraded Magic Voices - the microphone can be converter four magic voice changer: baby voice, man voice, woman voice. Different voice will give you different surprise, happy and let you feel fun and laugh.4.Newest Bluetooth 5.1 – this microphone adopt Bluetooth 5.1 technology, compatible with all smartphones. And you can use the karaoke microphone to record your clearly audio and vividly sound effect in your phone via 3.5 mm audio cable; Support TF card up to 32G.5.New Upgrade Battery – the microphone built-in 1500mah rechargeable battery, it can run up to 5hours after a full recharge. That is enough to satisfy your needs for Outdoor and Indoor.6.Perfect Gift - This is an awesome Karaoke Microphone gift for great life events such as birthdays, Valentine’s Day, Christmas, graduation, celebration of friendship, etc give you more happiness.Specification:1.Bluetooth version: 5.02.Range:10m3.output power:4Ohm, 5W x 24.Battery capacity :1500 mAh5.Battery life: 3-6 hours6.Signal to noise ratio: 80 dB7.Frequency response range: 20Hz-18KHZ8.Dimensions :60x40x214mm9.Packing Size: 82x82x225mm10.Gross Weight: 480gPackage list:Multifunctional Microphone x 1Charging Cable x 1Instructions x 1

Read more less

1. Charging time: about 1 hour 2. Battery capacity: 90mah 3. Usage time: about10 hours 4. Range frequency range: 2.4g 5. Method of connection method: automatic plug and play pairing 6. high performance 2.4GHz chip wireless transmission, stable connection 7. intelligent noise reduction, built-in noise reduction chip, with AI noise reduction algorithm, strong anti-interference ability

Read more less

1. Microphone: digital silicon mark 2. Input voltage: 5V 3. Microphone battery: 60MAH 4. Charging compartment battery: 300MAH 5. Signal-to-noise ratio: 64DBM 3-step noise reduction 6. Transmission delay: 30MS 7. Sensitivity: -42DB 8. Frequency response range: 20-20KHZ 9. Transmission distance: barrier-free 20m-30m

Read more less

1. Product Name:Wireless Lavalier Microphone2. Item model number:K93. Directivity:360 degree omnidirectional4. Sensitivity:-40db5. Signal-to-noise ratio:-65db6. Transmission distance:20 meters7. Charging time:about 90min

Read more less

Feature:1.The use of DSP sound field processing makes it support sound change to meet your entertainment needs. The microphone pickup is newly upgraded, and the voice is loud and not distorted.2.The reason why it offers you highly clear sound quality and stereo surround to ensure a more pleasant music experience is that it has built-in magnetic dual speakers with diaphragms.3.It is made of high-quality ABS material, which is lightweight and durable.4.Gold-plated larger area. Good looking. Special and nice appearance design.5.It is suitable for home, KTV, singing, etc. And it supports dual microphone interconnection, which can connect to the same mobile phone and sing the same song to achieve duet.Specification：1.Material: ABS2.Bluetoothc-compatible: 5.03.Effective Distance: 10 Meters4.Battery Capacity: 1800mAh (Included)5.Battery life: 5H6.Charging time: 3H7.Frequency Response Range: 100HZ-20000HZ8.Speaker power: 4Ω 5W9.Power Supply Voltage: DC 5V10.Endurance: 6 Hours11.Product size: 40 x 64 x 214mm12.Packing size: 82*82*225MM13.Weight: 410 (approx.)Packing list:Microphone x 1Charging Cable x 1Instructions x 1

Read more less

Feature:1.The use of DSP sound field processing makes it support sound change to meet your entertainment needs. The microphone pickup is newly upgraded, and the voice is loud and not distorted.2.The reason why it offers you highly clear sound quality and stereo surround to ensure a more pleasant music experience is that it has built-in magnetic dual speakers with diaphragms.3.It is made of high-quality ABS material, which is lightweight and durable.4.Gold-plated larger area. Good looking. Special and nice appearance design.5.It is suitable for home, KTV, singing, etc. And it supports dual microphone interconnection, which can connect to the same mobile phone and sing the same song to achieve duet.Specification：1.Material: ABS2.Bluetoothc-compatible: 5.03.Effective Distance: 10 Meters4.Battery Capacity: 1800mAh (Included)5.Battery life: 5H6.Charging time: 3H7.Frequency Response Range: 100HZ-20000HZ8.Speaker power: 4Ω 5W9.Power Supply Voltage: DC 5V10.Endurance: 6 Hours11.Product size: 40 x 64 x 214mm12.Packing size: 82*82*225MM13.Weight: 410 (approx.)Packing list:Microphone x 1Charging Cable x 1Instructions x 1

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF500-830MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF500-830MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

1. Delicate stereo system, restore the original sound2. One key to eliminate the original sound function3. Shocking bass, bring home the KTV4. Widely compatible, support major mainstream APP5. Three modes of play, Bluetooth / card / headphones6. High and low tone adjustment allows you a wider range of sound, better sound quality7. Material: ABS8. Function: voice change: doll sound, magic beast sound, eliminate the original sound9. Product size: 90.4 x 65 x 75.5mm10. Microphone size: 28.8mm x 70.6mmMicrophone specifications parameters:1. Pickup: back-pole condenser microphone2. Operating voltage: 3.7V3. Frequency range: 20HZ-20KHZ4. Battery specification: 1200 mAh 18650 built-in battery5. Power adapter: DC5V less than 1A (can be used with cell phone charger)6. Charging time: 3.5-4 hoursSpeaker specification parameters:1. Bluetooth version: 5.0 version2. Speaker diameter: 57MM3. Speaker power: 6W4. Operating voltage: 3.7V5. Frequency range: 20HZ-20KHZ6. Reverb: echo sound effect reverb7. Power adapter: DC5V less than 1A (can be used with cell phone charger)8. Battery specification: 2000 mAh 18650 built-in battery9. Charging time: about 2.5 hours

Read more less

1. Delicate stereo system, restore the original sound2. One key to eliminate the original sound function3. Shocking bass, bring home the KTV4. Widely compatible, support major mainstream APP5. Three modes of play, Bluetooth / card / headphones6. High and low tone adjustment allows you a wider range of sound, better sound quality7. Material: ABS8. Function: voice change: doll sound, magic beast sound, eliminate the original sound9. Product size: 90.4 x 65 x 75.5mm10. Microphone size: 28.8mm x 70.6mmMicrophone specifications parameters:1. Pickup: back-pole condenser microphone2. Operating voltage: 3.7V3. Frequency range: 20HZ-20KHZ4. Battery specification: 1200 mAh 18650 built-in battery5. Power adapter: DC5V less than 1A (can be used with cell phone charger)6. Charging time: 3.5-4 hoursSpeaker specification parameters:1. Bluetooth version: 5.0 version2. Speaker diameter: 57MM3. Speaker power: 6W4. Operating voltage: 3.7V5. Frequency range: 20HZ-20KHZ6. Reverb: echo sound effect reverb7. Power adapter: DC5V less than 1A (can be used with cell phone charger)8. Battery specification: 2000 mAh 18650 built-in battery9. Charging time: about 2.5 hours

Read more less

1. Delicate stereo system, restore the original sound2. One key to eliminate the original sound function3. Shocking bass, bring home the KTV4. Widely compatible, support major mainstream APP5. Three modes of play, Bluetooth / card / headphones6. High and low tone adjustment allows you a wider range of sound, better sound quality7. Material: ABS8. Function: voice change: doll sound, magic beast sound, eliminate the original sound9. Product size: 90.4 x 65 x 75.5mm10. Microphone size: 28.8mm x 70.6mmMicrophone specifications parameters:1. Pickup: back-pole condenser microphone2. Operating voltage: 3.7V3. Frequency range: 20HZ-20KHZ4. Battery specification: 1200 mAh 18650 built-in battery5. Power adapter: DC5V less than 1A (can be used with cell phone charger)6. Charging time: 3.5-4 hoursSpeaker specification parameters:1. Bluetooth version: 5.0 version2. Speaker diameter: 57MM3. Speaker power: 6W4. Operating voltage: 3.7V5. Frequency range: 20HZ-20KHZ6. Reverb: echo sound effect reverb7. Power adapter: DC5V less than 1A (can be used with cell phone charger)8. Battery specification: 2000 mAh 18650 built-in battery9. Charging time: about 2.5 hours

Read more less

1. Scenario: entertainment K song conference speech2. Bluetooth 5.0 chip, low latency for singing3. Cylindrical design handle, full of grip4. Magic voice changer, free voice switching5. Speaker: full frequency speaker 52mm, 4 ohms6. Battery capacity: 1800mAh7. Battery life: about 4 hours8. Bluetooth solution: AC6965E

Read more less

1. Scenario: entertainment K song conference speech2. Bluetooth 5.0 chip, low latency for singing3. Cylindrical design handle, full of grip4. Magic voice changer, free voice switching5. Speaker: full frequency speaker 52mm, 4 ohms6. Battery capacity: 1800mAh7. Battery life: about 4 hours8. Bluetooth solution: AC6965E

Read more less

1. Scenario: entertainment K song conference speech2. Bluetooth 5.0 chip, low latency for singing3. Cylindrical design handle, full of grip4. Magic voice changer, free voice switching5. Speaker: full frequency speaker 52mm, 4 ohms6. Battery capacity: 1800mAh7. Battery life: about 4 hours8. Bluetooth solution: AC6965E

Read more less

Features:1. Microphone volume adjustment, with LED light display2. Self-connection after booting, frequency is stable3. 30 meters barrier-free and stable transmission4. Freely place 2 AAA batteries (not included) in the battery compartment, work continuously for 6 hours5. Real-time monitoring, clear sound, no stuck, constant frequency6. Support SLR, mobile phone, audio and other equipment connection7. Equipped with two lavalier microphones and two hose microphones, customized condenser microphone core, metal material, anti-drop and durable8. Support one-to-one and one-to-two modes of use, no serial frequency, flexible collocation, easy to deal with various scenarios9. Multi-purpose and multi-compatible, making short video creation, live sound pickup, program interviews, online class teaching, etc. have good sound qualityparameter:1. Transmitting power: greater than or equal to 10dB2. Frequency response: 80HZ-16KHZ3. Pickup method: condenser microphone core, cardioid pointing4. Power supply: 2×AAA (not included)5. Frequency offset max: +/-10KHZ6. Use distance: 30M (barrier-free)7. Number of channels: 25CH8. Directivity: Cardioid9. Signal-to-noise ratio: greater than or equal to 81dB10. THD: less than or equal to 0.1%

Read more less

Features:1. Self-connection after power-on, stable frequency2. 30 meters barrier-free and stable transmission3. Support volume and volume adjustment, support one-key noise reduction function4. The sound is clear, not stuck, and constantly frequency5. Applicable scenarios: video, on-site teaching6. No serial frequency, flexible collocation, easy to deal with various scenes, the same scene can use 6 groups at the same timeparameter:1. Pointing range: omnidirectional2. Frequency: 2.4G3. Frequency response range: 20Hz-20kHz4. Transmission distance: 50 meters5. Signal-to-noise ratio: greater than or equal to 58db6. Battery capacity: 350mAh/3.7v7. Charging interface: Type-c interface8. Rated input: DC5V/1000mAh9. Charging time: 30 minutes10. Working hours: 6-8 hours11. Working temperature: -10-45 degrees Celsius12. Storage temperature: -20-60 degrees Celsius

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

Features:1. Microphone volume adjustment, one-key noise reduction function, with LED display2. Self-connection after booting, frequency is stable3. 30 meters barrier-free and stable transmission4. 10 hours of battery life, 1 hour of charging5. Built-in microphone, real-time monitoring, clear sound, no lag, constant frequency6. Support SLR, mobile phone, audio and other equipment connection7. Support one-to-one and one-to-two modes of use, no serial frequency, flexible collocation, easy to deal with various scenarios8. Multi-purpose, multi-compatible, making short video creation, Vlog shooting, live sound pickup, program interviews, online class teaching, etc. have good sound qualityparameter:1. Pointing type: omnidirectional2. Working frequency band: 2.4GHz (private protocol)3. Frequency response range: 20Hz~20kHz4. Transmission distance: about 30 meters5. Transmit power: less than 10dBm6. Battery capacity: 3.7V/350mAh7. Charging port: Type-C8. Rated input of charging interface: DC 5V/500mA9. Charging time: about 1 hour10. Battery life: 10 hours11. Working temperature: -10~45 degrees Celsius12. Storage temperature: -20~60 degrees Celsius

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

1. Sound channel: 2.02. Bluetooth protocol: 5.03. Battery capacity: 400mAh4. Frequency response range: 100HZ-20KHZ5. Signal-to-noise ratio: 75dB or more6. Material: ABS7. Scope of application: for cameras, cell phones, video cameras, computers, sound cards, microphones, recorders, mixers and other equipment8. Accessories: headphones, wind shield, camera cable, charging cable, storage box9. Weight: about 26g10. Size: about 4.7 x 4 x 1.5cmFeatures:1. Wireless recording VLOG, non-sensory wear, noise reduction effect, can filter noise and ambient sound, so that the sound is more stereo and clear2. Built-in DSP reverb chip, intelligent filtering of environmental noise, with reverb effect, singing more sense3. transmitter / receiver are with 3.5mm interface, real-time ear return, while recording and adjusting4. About 50 meters long-distance transmission, high-performance wireless technology, signal stability5. 360-degree high-definition sound pickup, built-in microphone, equal acceptance of sound in all directions, the human voice clear restoration6. OLED display, good brightness, high contrast, clearer recording, real-time display of various modes of status7. Lightweight and portable, easy to use

Read more less

1. Material: PVC, aluminum alloy2. Function: microphone, player, one-button mute, adjustable volume3. Signal-to-noise ratio: 95dB4. Frequency response range: 40Hz-20KHz5. Microphone type: condenser6. Pointing features: omnidirectional / non-directional7. USB plug and play, free driver installation8. Tempered glass material surface + frosted aluminum alloy frame, waterproof and drop-resistant9. Using 360-degree omni-directional high-sensitivity pickup, the sound is clear10. Product size: 11 x 11 x 3.2 cm11. Weight: about 150 gramsPacking list:-Microphone x 1-Data cable x 1-Instruction manual x 1

Read more less