Black Friday Week at Garmade ENDS SOON!

Save up to 25%! Don't miss out—check it out now!

Dec 03, 2024 11:59:59

  • For orders below 150€a 5% discount will be automatically applied.
  • For orders between 150€ and 250€a 10% discount will be automatically applied.
  • For orders between 250€ and 500€, a 15% discount will be automatically applied.
  • For orders between 500€ and 1000€, a 20% discount will be automatically applied.
  • For orders of above 1000€, a 25% discount will be automatically applied.

Waveshare 23949 USB To RS485/422 Isolated Converter, FT232RL And SP485EEN

Description


Features:
1. Onboard original FT232RL and SP485EEN chips; fast communication speed, stable and reliable, better compatibility
2. On-board integrated power isolation, providing stable isolation voltage, no additional power supply is required at the isolation end
3. Onboard integrated digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
4. Onboard TVS (Transient Voltage Suppressor), effectively suppressing surge voltage and transient peak voltage in the circuit, lightning protection and anti-static
5. On-board self-recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection, and improve impact resistance
6. Onboard 15KV ESD isolation protection and 600W lightning surge protection
7. The RS485/RS422 interface has a 120R terminal resistor on board, which is enabled by default and can be configured by jumpers
8. 3 LEDs to indicate power and transceiver status
9. Industrial-grade rail-type ABS shell design, small size, easy installation, high cost performance

Product parameters:
1. Baud rate: FT232RNL (300bps-3Mbps)
2. Host port: USB
3. Device port: RS485/422
4. Working voltage: 5V
5. Connector: USB-B
6. Protection: 200mA resettable fuse, ESD protection
7. Transmission distance: about 5m
8. Connector: screw terminal
9. Pins: A+, B-, PE
10. Direction control: hardware automatic control
11. Protection: 600W lightning protection surge suppression, 15KV ESD protection (120R balance resistor on board)
12. Transmission distance: about 1.2km (low speed)
13. Transmission method: point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
14. LED indicator light: PWR: red power indicator light, it is on when there is a USB connection and voltage is detected; TXD: green TX indicator light, it is on when the USB port sends data; RXD: blue RX indicator light, when the device port sends data back lights up
15. Working environment temperature: minus 15-70 degrees Celsius
16. Humidity: 5%-95% RH
17. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
18. Shell: rail type ABS shell, suitable for 35mm DIN rail
19. Product size: 81.9 × 54.0 × 32.0mm
20. Weight: 104 grams

Packing list:
-USB to RS485/422 x 1
-1.2mUSB-A to USB-B cable x 1
-Screwdriver x 1

Waveshare 23949 USB To RS485/422 Isolated Converter, FT232RL And SP485EEN

Product form

SKU: TBD05765731

  • In stock (Processing Time 1 - 72 hours)

147,81 lei

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Features:
    1. Onboard original FT232RL and SP485EEN chips; fast communication speed, stable and reliable, better compatibility
    2. On-board integrated power isolation, providing stable isolation voltage, no additional power supply is required at the isolation end
    3. Onboard integrated digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
    4. Onboard TVS (Transient Voltage Suppressor), effectively suppressing surge voltage and transient peak voltage in the circuit, lightning protection and anti-static
    5. On-board self-recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection, and improve impact resistance
    6. Onboard 15KV ESD isolation protection and 600W lightning surge protection
    7. The RS485/RS422 interface has a 120R terminal resistor on board, which is enabled by default and can be configured by jumpers
    8. 3 LEDs to indicate power and transceiver status
    9. Industrial-grade rail-type ABS shell design, small size, easy installation, high cost performance

    Product parameters:
    1. Baud rate: FT232RNL (300bps-3Mbps)
    2. Host port: USB
    3. Device port: RS485/422
    4. Working voltage: 5V
    5. Connector: USB-B
    6. Protection: 200mA resettable fuse, ESD protection
    7. Transmission distance: about 5m
    8. Connector: screw terminal
    9. Pins: A+, B-, PE
    10. Direction control: hardware automatic control
    11. Protection: 600W lightning protection surge suppression, 15KV ESD protection (120R balance resistor on board)
    12. Transmission distance: about 1.2km (low speed)
    13. Transmission method: point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
    14. LED indicator light: PWR: red power indicator light, it is on when there is a USB connection and voltage is detected; TXD: green TX indicator light, it is on when the USB port sends data; RXD: blue RX indicator light, when the device port sends data back lights up
    15. Working environment temperature: minus 15-70 degrees Celsius
    16. Humidity: 5%-95% RH
    17. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
    18. Shell: rail type ABS shell, suitable for 35mm DIN rail
    19. Product size: 81.9 × 54.0 × 32.0mm
    20. Weight: 104 grams

    Packing list:
    -USB to RS485/422 x 1
    -1.2mUSB-A to USB-B cable x 1
    -Screwdriver x 1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account