Products

1. Material: oxford tarpaulin + aluminum alloy frame 2. Built-in zipper pouch can store small items 3. Application: applicable to the diameter of less than 3.2 cm 4. Waterproof, hand washable 5. Suitable for most mountain bikes and bicycles 6. Size: L 7. Load: about 5kg 8. Weight: about 800g 9. Dimensions: 28x22x25cm

Read more less

1. Material: oxford tarpaulin + aluminum alloy frame 2. Built-in zipper pouch can store small items 3. Application: applicable to the diameter of less than 3.2 cm 4. Waterproof, hand washable 5. Suitable for most mountain bikes and bicycles 6. Size: L 7. Load: about 5kg 8. Weight: about 800g 9. Dimensions: 28x22x25cm

Read more less

1. Material: oxford tarpaulin + aluminum alloy frame 2. Built-in zipper pouch can store small items 3. Application: applicable to the diameter of less than 3.2 cm 4. Waterproof, hand washable 5. Suitable for most mountain bikes and bicycles 6. Size: L 7. Load: about 5kg 8. Weight: about 800g 9. Dimensions: 28x22x25cm

Read more less

1. Material: oxford tarpaulin + aluminum alloy frame 2. Built-in zipper pouch can store small items 3. Application: applicable to the diameter of less than 3.2 cm 4. Waterproof, hand washable 5. Suitable for most mountain bikes and bicycles 6. Size: L 7. Load: about 5kg 8. Weight: about 800g 9. Dimensions: 28x22x25cm

Read more less

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. Use for 1-1/8" (28.6mm) Stem. 2. These are Brand New Carbon Fiber Headset spacers in 100% carbon fiber. 3. It is 5-10-15-20mm high. It is perfect to get a good fit on your bike. 4. If you need to raise your handle bar, use these spacers. Material: Full Carbon Fiber Diameter: 28.6mm ( 1 1/8") Net Weight: 27g (4PCS) Package included: 1x 5mm thick spacers 1x 10mm thick spacers 1x 15mm thick spacers 1x 20mm thick spacers

Read more less

Parameter:1. Weight: 388 g2. Battery: 2 x 18650 batteries3. Material: aluminum alloy4. Dimensions: 105x50x26 mm5. Range: about 200-300 meters6. Mode: low light/medium light/high light/fast flash7. Contains: lamp, 2 brackets, data cable, manualFeatures:1. Double LED-T6 lamp beads, high brightness, long life2. Two kinds of brackets are available, easy to install3. Four lighting modes can be switched at will4. There is a battery indicator light at the rear, so you can know the battery status of the lights at any time5. Using intelligent temperature control circuit board, independent cooling protection6. USB direct charge, fast and stable

Read more less

1. High-strength steel bicycle hook, fixed on the load-bearing walls wall 2. Hook the front wheel bicycle, bicycle front up for bicycles to save space. Also be used for bike shop bike show 3. High strength, durable 4. Accessories: 4 metal screws, four expansion pipe 5. Applicable to all types of mountain bikes, road bikes, folding bikes, etc

Read more less

1. For Garmin Oregon 650 / 700 / 750 / 750t / 650t 2. Silicone material, light weight, strong toughness, durable, wear-resistant and scratch-resistant3. Does not fade, does not change color, can be washed with water, easy to clean4. 6 colors optional, highlighting fashion and personality, can be used with a variety of cycling sports scenes5. Size: 7x5x2cm, built according to the original code table, easy to use

Read more less

About the product1. Brand new and high quality 2. Can securely attach your Video Camcorder to Bicycle handlebars and other outdoor gear, so you can record all the action while keeping your hands free 3. A good assistant for cyclists, bikers to record on-the-go action 4. Convenient and reliable to use. 5. Easy to install

Read more less

About the product1. Brand new and high quality 2. Can securely attach your Video Camcorder to Bicycle handlebars and other outdoor gear, so you can record all the action while keeping your hands free 3. A good assistant for cyclists, bikers to record on-the-go action 4. Convenient and reliable to use. 5. Easy to install

Read more less

About the product1. Brand new and high quality 2. Can securely attach your Video Camcorder to Bicycle handlebars and other outdoor gear, so you can record all the action while keeping your hands free 3. A good assistant for cyclists, bikers to record on-the-go action 4. Convenient and reliable to use. 5. Easy to install

Read more less

1. Bicycle / Cycle handlebar mount and all weather, waterproof hard shell Touch Case. 2. All weather protection for your Mobile Phone. The Tough Case incorporates a strong durable weatherproof case for the Mobile Phone 3. Designed to IPX4, this all weather case will keep your Mobile Phone secure and dry in most riding conditions. This solid, robust case has been designed to withstand daily use and will protect against wet / damp weather. 4. Your Mobile Phone 4 is accessed through the front, touch sensitive lens while remaining protected within the Tough Case. 5. This lens has been made for todaya??s technology. The view remains clear and the sensitivity remains very responsive. 6. The Tough Case is supplied with a STANDARD hinged bike handle bar mount suitable for handlebars with a diameter between 21mm - 30mm. Simple one screw fixing makes fitting quick and easy. 7. The handlebar casing is lined to protect bars and reduce vibration. This casing is in two parts and is removable if required. 8. Press button release means the case to be completely removed from the handlebar mount at the touch of a button, a great security feature. 9. Fully adjustable - The TOUGH CASE can be turned 360 degrees allowing you to view your Mobile Phone horizontally or vertically, ideal for satnav & map applications the mount can also be tilted for video use while riding. 10. No tools required to fit. 11. Waterproof IPX4 Tested - suitable for general use in most weather conditions. 12. The Tough Case performed well in wet weather conditions providing reliable protection against rain, snow & damp air. NOTE: Do not submerge case or use underwater

Read more less

1. Large wide-angle floodlight, greatly widening the lighting angle, wide coverage of the front wheel area, providing a good lighting range for steering and night riding2. Optical lens design, far and near light lens, suitable for multiple scenes3. The main body is made of aluminum alloy, which can work normally even if it is dropped from a high altitude. It can effectively help the product to dissipate heat during use, and is suitable for use in multiple environments.4. Headlight lighting mode: high beam high - low beam high - low beam - high beam high beam - breathing flash high beam - flashing high beam, long press the switch button to turn off the light in any gear, when turned on again, The gear that is turned on is the gear mode before it was turned off.5. Taillight lighting mode: high brightness-half brightness-low brightness-slow flashing-interval flashing-fast flashing, press and hold the switch button in any gear to turn off the light, and when it is turned on again, the gear that is turned on is the gear before it was turned off model6. Easy to install and remove: the silicone can be stretched to a length of 95MM-160MM, and only one silicone strap is needed to fix the bicycle lightparameter:1. Lamp bead type: 2 x T6 headlights, 16 SMD red LEDs for taillights2. Built-in battery: 450mAh lithium battery3. Battery life: 2-8 hours for front lights, 3-8 hours for tail lights4. Charging time: 2-3 hours5. Material: aluminum alloy + ABS6. Charging interface: Type-C charging port7. Waterproof grade: IPX68. Product net weight: 42 pieces of headlights, 42 grams of taillights9. Dimensions: 40 x 25 x 35mmpacking list:Bicycle headlight x 1Bicycle Tail Light x 1Silicone strap x 2TYPE C charging cable x 2users Guide

Read more less

1. Wrench shape: double-headed wrench2. Surface treatment: galvanized3. Weight: 20g4. Material: zinc alloy5. Specifications: 6-15 mm 10 holes Length 9.5 cm6. Applicable: The parts and screws on the bicycle can be applied, and it is easy to carry.

Read more less

1. Name: Bicycle headlight2. Color: Black shell3. Light source: CREE XPE 3W LED (300 lumens)4. Material: PC lampshade + ABS lamp housing;5. Function: Highlight-low-blink-off;6. Battery: Built-in rechargeable lithium-ion polymer battery (800mAH, 3.7V)7. Weight: Net weight: about 40g, gross weight: about 70g8. Size: Length 65 × width 28 × height 23mm;9. Application: Handlebar diameter: 20-40mm10. Features: This product is novel in shape, small and exquisite, and has super practicality, which shows the fashion trend and technological atmosphere.11. Use high-power high-brightness CREE 3W LED (320 lumens) as the light source, coupled with transparent front + side frosted acrylic lampshade to enhance light, and the brightness is more than 5 times brighter than ordinary LED lights;12. V-shaped galvanized reflector is used to form a diffused spot, with a wide range of light exposure, 30-50 meters at night, and a wide passive viewing angle of 220 °, which fully guarantees your riding safety; due to the openings on both sides of the reflector , The light can leak from the side, illuminating the entire crystal head, it is beautiful and eye-catching;13. Super waterproof, the keys are covered with expanded rubber, and the USB charging interface is sealed with a silicone dust cover, making it safe to ride on rainy days;14. USB interface charging, using lithium-ion polymer battery (800mAH, 3.7V), can be reciprocated charging and discharging, fast charging speed, long discharge time, generally charging 3-4 hours, discharge time: 3h highlight, 5h low, Flashing 12h.15. Quick release design, the whole installation process is operated by hand, without tools, wrist-type silicone belt buckle design, adjustable length, suitable for various thickness handlebars (about 1-4CM)16. Professional 360 ° rotatable base design, the irradiation direction can be adjusted at will, which greatly increases the irradiation range of the lamp

Read more less

1. Material: aluminum alloy2. Process: CNC, anodizing3. Good compatibility with rubber ring, suitable for crankset with inner diameter of 21-23 mm4. Meticulous processing, smooth and delicate surface5. Not easy to fade, the color is bright and durable6. Durable and not easy to rust7. Weight: 7.3 grams

Read more less

1. Material: aluminum alloy2. Process: CNC, anodizing3. Good compatibility with rubber ring, suitable for crankset with inner diameter of 21-23 mm4. Meticulous processing, smooth and delicate surface5. Not easy to fade, the color is bright and durable6. Durable and not easy to rust7. Weight: 7.3 grams

Read more less

1. Material: metal2. Application: for ordinary ball hubs (not suitable for integrated wheels and bearing hubs), it needs to be used with quick release levers3. Strong and durable, not easy to break4. Weight: 65 grams on the front axle and 94.5 grams on the rear axle5. Dimensions: front axle 108mm, rear axle 144mm

Read more less

1. Material: metal2. Application: for ordinary ball hubs (not suitable for integrated wheels and bearing hubs), it needs to be used with quick release levers3. Strong and durable, not easy to break4. Weight: 65 grams on the front axle and 94.5 grams on the rear axle5. Dimensions: front axle 108mm, rear axle 144mm

Read more less

1. The stronger the light, the brighter, the safer night riding2. Long-term viewing distance, visible reflections from 300 meters away3. Adopt prism reflective technology to increase the brightness of reflective4. Rain and sun protection, not easy to fade5. Waterproof and wear-resistant, long service life6. High reflective brightness, bright colors7. Application: cars, motorcycles, bicycles, etc.8. Size: 21x11.5cm9. Material: PET10. Specification: 42 pcs / set

Read more less

1. The stronger the light, the brighter, the safer night riding2. Long-term viewing distance, visible reflections from 300 meters away3. Adopt prism reflective technology to increase the brightness of reflective4. Rain and sun protection, not easy to fade5. Waterproof and wear-resistant, long service life6. High reflective brightness, bright colors7. Application: cars, motorcycles, bicycles, etc.8. Size: 21x11.5cm9. Material: PET10. Specification: 42 pcs / set

Read more less

1. The stronger the light, the brighter, the safer night riding2. Long-term viewing distance, visible reflections from 300 meters away3. Adopt prism reflective technology to increase the brightness of reflective4. Rain and sun protection, not easy to fade5. Waterproof and wear-resistant, long service life6. High reflective brightness, bright colors7. Application: cars, motorcycles, bicycles, etc.8. Size: 21x11.5cm9. Material: PET10. Specification: 42 pcs / set

Read more less

1. The stronger the light, the brighter, the safer night riding2. Long-term viewing distance, visible reflections from 300 meters away3. Adopt prism reflective technology to increase the brightness of reflective4. Rain and sun protection, not easy to fade5. Waterproof and wear-resistant, long service life6. High reflective brightness, bright colors7. Application: cars, motorcycles, bicycles, etc.8. Size: 21x11.5cm9. Material: PET10. Specification: 42 pcs / set

Read more less

1. Q195 wire stamping forming2. Surface black spray treatment3. Wear resistance, corrosion resistance, strong load-bearing4. Material: Iron5. Load-bearing capacity: up to 15kg6. Surface treatment: plastic spray + dipping7. Weight: about 275g/piece for 820 models, about 284g/piece for 830 models8. Size: 820 models are about 17.8x13.3x8.8 cm, 830 models are about 9.5x16x14 cm9. Note: 830 models include screws, 820 models do not

Read more less

1. Q195 wire stamping forming2. Surface black spray treatment3. Wear resistance, corrosion resistance, strong load-bearing4. Material: Iron5. Load-bearing capacity: up to 15kg6. Surface treatment: plastic spray + dipping7. Weight: about 275g/piece for 820 models, about 284g/piece for 830 models8. Size: 820 models are about 17.8x13.3x8.8 cm, 830 models are about 9.5x16x14 cm9. Note: 830 models include screws, 820 models do not

Read more less

1. Using: - Press to turn the light on, seven pics show up one by one. - Press again to turn on the laser light. - Press once again to switch it off. 2. Turn Light Function: - When you are riding a bike, in order to switch the tail turning light on automatically, you just have to lean the bike (left / right) for about 10 degree. The light would flash for six times to warn the vehicles behind you. 3. Brake Function: - When you are riding a bike, if you use a bike, a builtin sensor would send a message to the lights and all the 64 LED lights would light up automitically and flash for six times to warn the vehicles behind you. 4. The mount holder strap is suitable for diameter 15-28mm handlebar. 5. Built-in 1200mAh rechargeable lithium battery. 6. With USB charger cable, you can charge for your bike brake light.

Read more less

1. Material: plastic2. Multifunctional 2-in-1 speaker lighting3. 36V 48V 52V 60V universal4. Weight: 120g5. Dimensions: 8x8x6 cm

Read more less

1. LED with laser light bike tail light. 2. Include 5 high light LED lights. 3. 7 flashing modes for your choice. 4. Easy to install and remove. 5. And it is water resistant. 6. Powered by 2 x AAA batteries (not included). 7. Comes with a bracket, suitable for installing in the tail of the bike. 8. Design for your safety riding. 9. 260 degrees wide visility.

Read more less

Feature:1. Super bright LED COB as the light source, high illuminance2. With different lighting modes to meet the needs of riding3. Provide two-color or three-color for ordering options4. With mode memory, charging indicator5. Built-in 500mAH lithium polymer battery, rechargeable6. Vertical or horizontal installation on the bracket, adjustable inclination7. The silicone belt can be quickly installed and disassembled, and the installation range is wide Specification:1. Material: PC2. Light source: LED COB, 1W, 10-15lm3. Light color: red/blue, red/white, red/white/blue4. Lighting mode: 5/6 mode5. Mode memory: available6. Switch: Press the button, long press for 1.5S to turn on/off, quickly click to switch modes7. Battery: Lithium polymer, 500mAH 3.7V8. Input: 5V 0.5A9. Charging: USB interface, fully charged for about 2 hours10. Running time: 2-4 hours11. Inlet protection: splash-proof, please dont use it immersed in water12. Installation range: silicone strap suitable for tube diameter 22-33 mm13. Net weight: about 45 grams14. Dimensions: 87x20x30 mm Lighting mode:1. Red/White (7505B) 5 modes: red stable, red flash, white stable, white flash, red/white flash2. Red/Blue (7505) 5 modes: red stable, red flash, blue stable, blue flash, red and blue flash3. Red/White/Blue (7505C): white stable, white flashing, red and blue Packing list:- Tail light x 1- Silicone tape x 1- USB cable x 1- Manual x 1

Read more less

Feature:1. Super bright LED COB as the light source, high illuminance2. With different lighting modes to meet the needs of riding3. Provide two-color or three-color for ordering options4. With mode memory, charging indicator5. Built-in 500mAH lithium polymer battery, rechargeable6. Vertical or horizontal installation on the bracket, adjustable inclination7. The silicone belt can be quickly installed and disassembled, and the installation range is wide Specification:1. Material: PC2. Light source: LED COB, 1W, 10-15lm3. Light color: red/blue, red/white, red/white/blue4. Lighting mode: 5/6 mode5. Mode memory: available6. Switch: Press the button, long press for 1.5S to turn on/off, quickly click to switch modes7. Battery: Lithium polymer, 500mAH 3.7V8. Input: 5V 0.5A9. Charging: USB interface, fully charged for about 2 hours10. Running time: 2-4 hours11. Inlet protection: splash-proof, please don't use it immersed in water12. Installation range: silicone strap suitable for tube diameter 22-33 mm13. Net weight: about 45 grams14. Dimensions: 87x20x30 mm Lighting mode:1. Red/White (7505B) 5 modes: red stable, red flash, white stable, white flash, red/white flash2. Red/Blue (7505) 5 modes: red stable, red flash, blue stable, blue flash, red and blue flash3. Red/White/Blue (7505C): white stable, white flashing, red and blue Packing list:- Tail light x 1- Silicone tape x 1- USB cable x 1- Manual x 1

Read more less

Feature:1. Super bright LED COB as the light source, high illuminance2. With different lighting modes to meet the needs of riding3. Provide two-color or three-color for ordering options4. With mode memory, charging indicator5. Built-in 500mAH lithium polymer battery, rechargeable6. Vertical or horizontal installation on the bracket, adjustable inclination7. The silicone belt can be quickly installed and disassembled, and the installation range is wide Specification:1. Material: PC2. Light source: LED COB, 1W, 10-15lm3. Light color: red/blue, red/white, red/white/blue4. Lighting mode: 5/6 mode5. Mode memory: available6. Switch: Press the button, long press for 1.5S to turn on/off, quickly click to switch modes7. Battery: Lithium polymer, 500mAH 3.7V8. Input: 5V 0.5A9. Charging: USB interface, fully charged for about 2 hours10. Running time: 2-4 hours11. Inlet protection: splash-proof, please dont use it immersed in water12. Installation range: silicone strap suitable for tube diameter 22-33 mm13. Net weight: about 45 grams14. Dimensions: 87x20x30 mm Lighting mode:1. Red/White (7505B) 5 modes: red stable, red flash, white stable, white flash, red/white flash2. Red/Blue (7505) 5 modes: red stable, red flash, blue stable, blue flash, red and blue flash3. Red/White/Blue (7505C): white stable, white flashing, red and blue Packing list:- Tail light x 1- Silicone tape x 1- USB cable x 1- Manual x 1

Read more less

Feature:1. Super bright LED COB as the light source, high illuminance2. With different lighting modes to meet the needs of riding3. Provide two-color or three-color for ordering options4. With mode memory, charging indicator5. Built-in 500mAH lithium polymer battery, rechargeable6. Vertical or horizontal installation on the bracket, adjustable inclination7. The silicone belt can be quickly installed and disassembled, and the installation range is wide Specification:1. Material: PC2. Light source: LED COB, 1W, 10-15lm3. Light color: red/blue, red/white, red/white/blue4. Lighting mode: 5/6 mode5. Mode memory: available6. Switch: Press the button, long press for 1.5S to turn on/off, quickly click to switch modes7. Battery: Lithium polymer, 500mAH 3.7V8. Input: 5V 0.5A9. Charging: USB interface, fully charged for about 2 hours10. Running time: 2-4 hours11. Inlet protection: splash-proof, please don't use it immersed in water12. Installation range: silicone strap suitable for tube diameter 22-33 mm13. Net weight: about 45 grams14. Dimensions: 87x20x30 mm Lighting mode:1. Red/White (7505B) 5 modes: red stable, red flash, white stable, white flash, red/white flash2. Red/Blue (7505) 5 modes: red stable, red flash, blue stable, blue flash, red and blue flash3. Red/White/Blue (7505C): white stable, white flashing, red and blue Packing list:- Tail light x 1- Silicone tape x 1- USB cable x 1- Manual x 1

Read more less

Front Light Features:1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery lifeTail Light Features:1. 16 SMD red LEDs, warning lighting at night2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle lightParameter1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs2. Irradiation distance: 100-200 meters3. Lumens: 300 lumens4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life5. Charging interface type: TYPE-C/USB-C USB charging port6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged7. Front light mode: high-medium-low-SOS-warning flash8. Tail light mode: high-medium-low-slow flash-fast flash-marquee9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory10. Charging voltage: 5V/1A11. Barrel material: aluminum alloy (wear-resistant anodized)12. Charging time: 2-3 hours13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery15. Switch type: lamp head push switch16. Waterproof grade: IPX617. Packing list: host + USB cable + silicone strap + manual + packing box18. Size: 4.3 x 2.4 x 2.8cm19. Net weight: 36g

Read more less

Front Light Features:1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery lifeTail Light Features:1. 16 SMD red LEDs, warning lighting at night2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle lightParameter1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs2. Irradiation distance: 100-200 meters3. Lumens: 300 lumens4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life5. Charging interface type: TYPE-C/USB-C USB charging port6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged7. Front light mode: high-medium-low-SOS-warning flash8. Tail light mode: high-medium-low-slow flash-fast flash-marquee9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory10. Charging voltage: 5V/1A11. Barrel material: aluminum alloy (wear-resistant anodized)12. Charging time: 2-3 hours13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery15. Switch type: lamp head push switch16. Waterproof grade: IPX617. Packing list: host + USB cable + silicone strap + manual + packing box18. Size: 4.3 x 2.4 x 2.8cm19. Net weight: 36g

Read more less

Front Light Features:1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery lifeTail Light Features:1. 16 SMD red LEDs, warning lighting at night2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle lightParameter1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs2. Irradiation distance: 100-200 meters3. Lumens: 300 lumens4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life5. Charging interface type: TYPE-C/USB-C USB charging port6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged7. Front light mode: high-medium-low-SOS-warning flash8. Tail light mode: high-medium-low-slow flash-fast flash-marquee9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory10. Charging voltage: 5V/1A11. Barrel material: aluminum alloy (wear-resistant anodized)12. Charging time: 2-3 hours13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery15. Switch type: lamp head push switch16. Waterproof grade: IPX617. Packing list: host + USB cable + silicone strap + manual + packing box18. Size: 4.3 x 2.4 x 2.8cm19. Net weight: 36g

Read more less

1. 1680D fabric, thick and durable. 2. Large capacity, easy to carry, long-distance necessary. 3. The outer layer of the bag can be equipped with small tools to prevent loss. 4. Personalized compartments in the bag, frame and wheels are open to avoid scratches. 5. It is suitable for packing bicycles on cars, trains, subways, and can also be carried. 6. Size: Unfolded: 130 x 82 x 25cm, not unfolded: 43 x 28 x 5cm

Read more less

Description:1. Built-in 500MAH polymer lithium battery2. Remote control battery: button battery CR2016 3V / three (subject to the actual remote control model)3. The main battery is continuously charged and discharged up to 500 times (normal temperature)4. Host size: 93x45x19 mm5. Remote control size: 70x32x20 mm6. Alarm sound, test distance 10 cm up to 100 decibels

Read more less

1. Material: aluminum alloy2. The rear wheel fixed seat has two kinds of arc surface, suitable for different bicycle tires3. The rear wheel retaining seat has a nylon strap to secure the crank4. Strong and durable, not easy to deform5. High hardness and good durability6. Convenient to fix the bike on the roof7. RC010 Size: 109x74x75 mm8. RC010 Weight: 214 g9. RC02 Size: 160x64x40 mm10. RC02 Weight: 250 g11. Distribution screws, nuts, and internal hexagon wrench

Read more less

1. Material: aluminum alloy2. The rear wheel fixed seat has two kinds of arc surface, suitable for different bicycle tires3. The rear wheel retaining seat has a nylon strap to secure the crank4. Strong and durable, not easy to deform5. High hardness and good durability6. Convenient to fix the bike on the roof7. RC010 Size: 109x74x75 mm8. RC010 Weight: 214 g9. RC02 Size: 160x64x40 mm10. RC02 Weight: 250 g11. Distribution screws, nuts, and internal hexagon wrench

Read more less

1. Material: aluminum alloy2. The rear wheel fixed seat has two kinds of arc surface, suitable for different bicycle tires3. The rear wheel retaining seat has a nylon strap to secure the crank4. Strong and durable, not easy to deform5. High hardness and good durability6. Convenient to fix the bike on the roof7. RC010 Size: 109x74x75 mm8. RC010 Weight: 214 g9. RC02 Size: 160x64x40 mm10. RC02 Weight: 250 g11. Distribution screws, nuts, and internal hexagon wrench

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder cant be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less

Three-in-one combination tool:1. Environmentally friendly plastic, good slip resistance2. One-piece milling pin forming, high strength3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel4. Material: carbon steel + surface chrome plating5. Size: length 20cm6. Weight: about 200gPull code tool:1. The ejector rod has an extended and removable square mouth2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis4. Anti-slip embossing, easy to screw by hand, easy to adjust5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured7. Material: high strength steel8. Size: length 8cm, diameter 1.9cm9. Weight: about 120gSilver chain clipper:1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation2. Effectively avoid ejection, the ejector needles make concentric and concentric movements3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged5. Using automatic thread rolling machine, high precision push thread, accurate push6. Material: high strength steel7. Size: 8.2x7x1.1cm8. Weight: about 120gSpoke wrench1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand6. Material: high strength steel7. Size: 3.8x3.8x1.7cm8. Weight: about 46gUniversal tool for flywheel:1. With the use of a chain wrench, the flywheel can be easily removed2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled3. Material: carbon steel4. Size: height 2.6cm, diameter 2.5cm5. Weight: about 33gBottom axle removal sleeve:1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force3. 20 sturdy teeth, which can fit and exert force at the same time4. Satisfy the daily vehicle disassembly, maintenance and durability of riders5. Material: high strength steel6. Size: 3.2x3.25cm7. Weight: about 108gTire lever:1. Material: high strength steel + plastic handle2. Size: length 15cm3. Weight: about 120gFreewheel chain wrench:1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain2. Material: high strength3. Size: length 30cm7. Weight: about 260gChain clipper:1. Material: high strength steel + plastic handle2. Dimensions: 10.5 x 7 x 2cm3. Weight: about 200g

Read more less