Microsoft Replacement Parts
For Microsoft Surface Laptop 3 / Laptop 4 4 in 1 Bottom Case Rubber Mats (Black)
1. Replace your faulty, cracked or broken bottom case rubber feet 2. Protect your laptop bottom case from wear and tear, extend its service life 3. Set including 4 pieces of rubber feet, enough for you to use 4. Completely fit and work 5. Each item has been checked and in good condition before shipping
326,13 Kč
-
For Microsoft Surface Laptop 3 / Laptop 4 4 in 1 Bottom Case Rubber Mats (Grey)
1. Replace your faulty, cracked or broken bottom case rubber feet 2. Protect your laptop bottom case from wear and tear, extend its service life 3. Set including 4 pieces of rubber feet, enough for you to use 4. Completely fit and work 5. Each item has been checked and in good condition before shipping
326,13 Kč
-
1 Pair Hinge Kickstand Connector Shaft for Microsoft Surface Pro 5 / Pro 6 / Pro 7 (Silver)
1. Hinge kickstand connector shaft replacement for Microsoft Surface Pro 5 / Pro 6 / Pro 7. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
400,68 Kč
-
OEM LCD Screen for Microsoft Surface Go 2 10.5 inch 1901 1906 1926 1927 with Digitizer Full Assembly (Black)
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Microsoft Surface Go 2 10.5 inch 1901 1906 1926 1927. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
1.186,51 Kč
-
Front Housing Adhesive for Miscrosoft Surface Pro 7
1. Replacement front housing adhesive for Miscrosoft Surface Pro 7 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
249,52 Kč
-
Front Housing Adhesive for Miscrosoft Surface Book 2 15 inch
1. Replacement front housing adhesive for Miscrosoft Surface Book 2 15 inch 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
236,06 Kč
-
Front Housing Adhesive for Miscrosoft Surface Pro 4
1. Replacement front housing adhesive for Miscrosoft Surface Pro 4 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
212,76 Kč
-
LCD Flex Cable for Microsoft Surface Pro 4 to Surface Pro 5
1. LCD flex cable ribbon replacement for Microsoft Surface Pro 4 to Surface Pro 5 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
251,07 Kč
-
Front Housing Adhesive for Miscrosoft Surface Book / Book 2 13.5 inch
1. Replacement front housing adhesive for Miscrosoft Surface Book / Book 2 13.5 inch 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
212,76 Kč
-
Front Housing Adhesive for Miscrosoft Surface Pro 5
1. Replacement front housing adhesive for Miscrosoft Surface Pro 5 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
226,22 Kč
-
For Microsoft Surface Pro 5 1796 Touch Panel
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Touch Panel replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
755,03 Kč
-
OEM LCD Screen for Microsoft Surface Pro 4 v1.0 with Digitizer Full Assembly
About the product1. Replacement LCD screen + touch screen digitizer assembly for Microsoft Surface Pro 4 v1.0 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan 2. Original top quality. 3. Complete fit and work 4. Supply quality warranty with professional service
1.803,05 Kč
-
LCD Flex Cable for Microsoft Surface Pro 4
1. LCD flex cable ribbon replacement for Microsoft Surface Pro 4 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
252,88 Kč
-
WiFi Antenna Flex Cable M1024927-001 M1024928-001 for Miscrosoft Surface Pro 5
1. WiFi antenna signal flex cable replacement for Miscrosoft Surface Pro 5. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
474,19 Kč
-
For Microsoft Surface Pro 4 / Pro 7+ 1 Pair Speaker Ringer Buzzer Dustproof Mesh
1. Speaker dustproof mesh replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
193,35 Kč
-
Power Button & Volume Button Flex Cable X933421-004 for Miscrosoft Surface Pro 4 1724
1. Volume button & power button flex cable replacement for Miscrosoft Surface Pro 4 1724 2. Replace your broken or unusable one with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
251,07 Kč
-
1 Pair Hinge Kickstand Connector Shaft for Microsoft Surface Pro 5 / Pro 6 / Pro 7 (Black)
1. Hinge kickstand connector shaft replacement for Microsoft Surface Pro 5 / Pro 6 / Pro 7. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
400,68 Kč
-
3240x2160 Original LCD Screen for Microsoft Surface Book 2 15 inch LP150QD1-SPA with Digitizer Full Assembly
About the product1. Replacement LCD display + touch screen digitizer assembly for Microsoft Surface Book 2 15 inch LP150QD1-SPA. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
4.548,01 Kč
-
LCD Flex Cable for Microsoft Surface Book 1703 1705 1724 X912283-004
1. LCD flex cable ribbon replacement for Microsoft Surface Book 1703 1705 1724 X912283-004 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
283,68 Kč
-
Charging Port Connector for Microsoft Surface Pro 4/Pro 5 1724 1796
1. Charging port connector replacement for Miscrosoft Surface Pro 4/Pro 5 1724 1796. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
405,34 Kč
-
For Microsoft Surface Laptop 3 / Laptop 4 4 in 1 Bottom Case Rubber Mats (Gold)
1. Replace your faulty, cracked or broken bottom case rubber feet 2. Protect your laptop bottom case from wear and tear, extend its service life 3. Set including 4 pieces of rubber feet, enough for you to use 4. Completely fit and work 5. Each item has been checked and in good condition before shipping
328,46 Kč
-
For Microsoft Surface Go 1 Touch Panel
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Touch Panel replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
681,00 Kč
-
Charging Port Connector Flex Cable for Microsoft Surface Laptop 3 13.5inch
1. Charging port connector replacement for Microsoft Surface Laptop 3 13.5inch. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
369,88 Kč
-
Charging Port Connector Flex Cable for Microsoft Surface Laptop 3 15inch
1. Charging port connector replacement for Microsoft Surface Laptop 3 15inch. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
407,67 Kč
-
Charging Port Connector Flex Cable for Microsoft Surface Pro 5 / Pro 6
1. Charging port connector replacement for Microsoft Surface Pro 5 / Pro 6. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
397,83 Kč
-
Original LCD Screen for Microsoft Surface Laptop 3 13.5 inch with Digitizer Full Assembly（Black)
About the product1. Replacement LCD display + touch screen digitizer assembly for Microsoft Surface Laptop 3 13.5 inch. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
2.559,11 Kč
-
LCD Flex Cable for Microsoft Surface Pro 7 1866
1. LCD flex cable ribbon replacement for Microsoft Surface Pro 7 1866 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
251,07 Kč
-
OEM LCD Screen for Microsoft Surface Pro 5 1796 LP123WQ1(SP)(A2) 12.3 inch with Digitizer Full Assembly (Black)
Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Microsoft Surface Pro 5 1796 LP123WQ1(SP)(A2) 12.3 inch. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
3.469,44 Kč
-
Power Button & Volume Button Flex Cable M1002277-004 for Miscrosoft Surface Pro 5/Pro 6/Pro 7
1. Volume button & power button flex cable replacement for Miscrosoft Surface Pro 5/Pro 6/Pro 7 2. Replace your broken or unusable one with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
249,52 Kč
-
For Microsoft Surface Laptop 3 / 4 / 5 Type-C Charging Port Connector
1. Charging port connector replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
281,35 Kč
-
US Version Keyboard with Power Button for Microsoft Surface Laptop Go 1934(Grey)
1. Replace your broken or unusable item with a new one 2. Make your device look more refreshing than ever 3. Completely fit and work 4. Each item has been checked and in good condition before shipping 5. Professional installation is highly recommended
773,66 Kč
-
For Microsoft Surface Laptop Go 1934 Bottom Case Mats (Silver)
1. Replace your faulty, cracked or broken bottom case rubber feet 2. Protect your laptop bottom case from wear and tear, extend its service life 3. Set including 2 pieces of rubber feet, enough for you to use 4. Completely fit and work 5. Each item has been checked and in good condition before shipping
407,93 Kč
-
For Microsoft Surface Go 2 / Go 3 Touch Panel
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Touch Panel replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
681,00 Kč
-
DP Port For Microsoft Surface Pro 3 / Surface Pro 4
1. DP jack connector for Microsoft Surface Pro 3 / Surface Pro 4 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts
251,07 Kč
-
Wifi Antenna Signal Frame for Microsoft Surface Book / Surface Book 2 13.5 inch X944025-001
1. Replacement Wifi antenna signal frame for Microsoft Surface Book / Surface Book 2 X944025-001. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.
449,86 Kč
-
Touch / Audio / LCD Flex Cable for Microsoft Surface Go 2 T1905002 DD0TX8LC121
1. LCD flex cable ribbon replacement for Microsoft Surface Go 2 T1905002 DD0TX8LC121 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
400,68 Kč
-
Touch Flex Cable for Microsoft Surface Pro 7 1866
1. Replacement touch flex cable for Microsoft Surface Pro 7 1866. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.
251,07 Kč
-
Battery Back Cover for Microsoft Lumia 640 XL (Black)
About the product1. High quality back cover replacement for Microsoft Lumia 640 XL 2. Replace your broken or unworkable back cover with a new one 3. Each item has been checked and in good condition before shipping
211,99 Kč
-
Touch Flex Cable for Microsoft Surface Pro 4
1. Touch flex cable ribbon replacement for Microsoft Surface Pro 4 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
248,22 Kč
-
LCD Flex Cable for Microsoft Surface Pro 5
1. LCD flex cable ribbon replacement for Microsoft Surface Pro 5 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
252,37 Kč
-
Touch Flex Cable 912285-003 for Microsoft Surface Book 1703
1. Replacement touch flex cable for Microsoft Surface Book 1703. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.
283,68 Kč
-
Keyboard Flex Cable for Microsoft Surface Pro 4 X912375-007 X912375-005
1. Replacement keyboard flex cable for Miscrosoft Surface Pro 4 X912375-007 X912375-005. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.
321,47 Kč
-
Keyboard Flex Cable for Microsoft Surface Pro 9 2038 0801-FPX2BQS
1. Replacement keyboard flex cable for Microsoft Surface Pro 9 2038 0801-FPX2BQS. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. Specification: General Compatible with MicroSoft: Surface Pro 9 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 27cm * 32cm / 12.6inch * 10.63inch * 12.6inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs
508,61 Kč
-
LCD Screen For Microsoft Surface Pro 9 2022 with Digitizer Full Assembly
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Microsoft Surface Pro 9 2022 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed
10.631,96 Kč
-
For Microsoft Surface Pro 7 / Pro 7+ Type-C Charging Port Connector
1. Charging port connector replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
371,69 Kč
-
For Microsoft Surface Laptop Go 1934 Bottom Case Mats (Gold)
1. Replace your faulty, cracked or broken bottom case rubber feet 2. Protect your laptop bottom case from wear and tear, extend its service life 3. Set including 2 pieces of rubber feet, enough for you to use 4. Completely fit and work 5. Each item has been checked and in good condition before shipping
407,93 Kč
-
For Microsoft Surface Pro 4 1724 Touch Panel
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Touch Panel replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
755,03 Kč
-
LCD Flex Cable for Microsoft Surface Pro 7+
1. LCD flex cable ribbon replacement for Microsoft Surface Pro 7+ 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
324,58 Kč
