Products

4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600E-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.2. Please check the supported bands according to your local service provider, select the proper one when placing order.Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Support GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Onboard CP2102 USB to UART converter, for serial debugging6. Breakout UART control pins, to connect with host boards like Arduino/STM327. SIM card slot, supports 1.8V/3V SIM card8. Onboard audio jack and audio decoder for making telephone call9. 2x LED indicators, easy to monitor the working status10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)12. Autobauding baudrate: 9600bps ~ 115200bps13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)14. Support SIM application toolkit: SAT Class 3, USAT15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: - LTE-- SIM7600A-H: --- LTE-FDD B2/B4/B12-- SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20--- LTE-TDD B38/B40/B41-- SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41--- LTE-FDD B1/B3/B8- WCDMA / TD-SCDMA / CDMA 2000-- SIM7600A-H: --- UMTS/HSPA+ B2/B5-- SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8-- SIM7600CE-T:--- UMTS/HSDPA/HSPA+ B1/B8--- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0- GSM/GPRS/EDGE 900/1800 MHz2. Generation: 4G, 3G, 2.5G, 2G3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS18004. Data Speed- LTE CAT 4-- Uplink=<50 Mbps-- Downlink=<150 Mbps- UMTS-- Uplink=<384Kbps-- Downlink=<384Kbps- EDGE-- Uplink=<236.8kbps-- Downlink=<236.8kbps- GPRS-- Uplink=<85.6kbps-- Downlink=<85.6kbps- HSPA+-- Uplink=<5.76Mbps-- Downlink=<42MbpsGNSS Specifications1. Receiver type- 16-channel- C/A code2. Sensitivity- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)- Cold starts: -148 dBm3. Time-To-First-Fix (open air)- Cold starts: <35s- Hot starts: <1s4. Accuracy- Position: <2.5m CEPSMS and Audio Specifications1. SMS- Support types: MT, MO, CB, Text, PDU- Storage: USIM card and ME (default)2. Audio feature- Support echo cancellation- Support noise reductionOther Specifications1. Power supply: 5V2. Operating voltage: 5V/3.3V (configured via jumper)3. Operating temperature: -30 degree C ~ 80 degree C4. Storage temperature: -45 degree C ~ 90 degree C5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600E-H2. CP2102 USB to UART converter3. NAU8810 audio decoder4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V5. MP2128DT power chip6. MP1482 power chip7. Raspberry Pi GPIO header: for connecting with Raspberry Pi8. SIM7600 control interface: for connecting with host boards like Arduino/STM329. SIM card slot: supports 1.8V/3V SIM card10. TF card slot: allows file/SMS/... storage11. 3.5mm earphone/mic jack12. USB interface: for testing AT Commands, getting GPS positioning data, etc.13. USB to UART interface: for serial debugging, or login to Raspberry Pi14. MAIN antenna connector15. AUX antenna connector16. GNSS antenna connector17. Power switch18. Network status indicator19. Power indicator20. Operating voltage selection jumper: - VCCIO - 3.3V: set operating voltage as 3.3V- VCCIO - 5V: set operating voltage as 5V21. UART selection jumper: - A: Access Raspberry Pi via USB to UART- B: Control the SIM7600 by Raspberry Pi- C: Control the SIM7600 via USB to UARTPackage Contents1. SIM7600E-H 4G HAT x12. LTE Antenna x13. GPS External Antenna (B) x14. USB type A plug to micro plug cable x25. RPi screws pack (2pcs) x1

Read more less

4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600A-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.2. Please check the supported bands according to your local service provider, select the proper one when placing order.Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Support GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Onboard CP2102 USB to UART converter, for serial debugging6. Breakout UART control pins, to connect with host boards like Arduino/STM327. SIM card slot, supports 1.8V/3V SIM card8. Onboard audio jack and audio decoder for making telephone call9. 2x LED indicators, easy to monitor the working status10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)12. Autobauding baudrate: 9600bps ~ 115200bps13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)14. Support SIM application toolkit: SAT Class 3, USAT15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: - LTE-- SIM7600A-H: --- LTE-FDD B2/B4/B12-- SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20--- LTE-TDD B38/B40/B41-- SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41--- LTE-FDD B1/B3/B8- WCDMA / TD-SCDMA / CDMA 2000-- SIM7600A-H: --- UMTS/HSPA+ B2/B5-- SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8-- SIM7600CE-T:--- UMTS/HSDPA/HSPA+ B1/B8--- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0- GSM/GPRS/EDGE 900/1800 MHz2. Generation: 4G, 3G, 2.5G, 2G3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS18004. Data Speed- LTE CAT 4-- Uplink=<50 Mbps-- Downlink=<150 Mbps- UMTS-- Uplink=<384Kbps-- Downlink=<384Kbps- EDGE-- Uplink=<236.8kbps-- Downlink=<236.8kbps- GPRS-- Uplink=<85.6kbps-- Downlink=<85.6kbps- HSPA+-- Uplink=<5.76Mbps-- Downlink=<42MbpsGNSS Specifications1. Receiver type- 16-channel- C/A code2. Sensitivity- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)- Cold starts: -148 dBm3. Time-To-First-Fix (open air)- Cold starts: <35s- Hot starts: <1s4. Accuracy- Position: <2.5m CEPSMS and Audio Specifications1. SMS- Support types: MT, MO, CB, Text, PDU- Storage: USIM card and ME (default)2. Audio feature- Support echo cancellation- Support noise reductionOther Specifications1. Power supply: 5V2. Operating voltage: 5V/3.3V (configured via jumper)3. Operating temperature: -30 degree C ~ 80 degree C4. Storage temperature: -45 degree C ~ 90 degree C5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600A-H2. CP2102 USB to UART converter3. NAU8810 audio decoder4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V5. MP2128DT power chip6. MP1482 power chip7. Raspberry Pi GPIO header: for connecting with Raspberry Pi8. SIM7600 control interface: for connecting with host boards like Arduino/STM329. SIM card slot: supports 1.8V/3V SIM card10. 3.5mm earphone/mic jack11. USB interface: for testing AT Commands, getting GPS positioning data, etc.12. USB to UART interface: for serial debugging, or login to Raspberry Pi13. MAIN antenna connector14. AUX antenna connector15. GNSS antenna connector16. Power switch17. Network status indicator18. Power indicator19. Operating voltage selection jumper: - VCCIO - 3.3V: set operating voltage as 3.3V- VCCIO - 5V: set operating voltage as 5V20. UART selection jumper: - A: access Raspberry Pi via USB to UART- B: control the SIM7600 by Raspberry Pi- C: control the SIM7600 via USB to UARTPackage Contents1. SIM7600A-H 4G HAT x12. LTE Antenna x13. GPS External Antenna (B) x14. USB type A plug to micro plug cable x25. RPi screws pack (2pcs) x1

Read more less

Features1. 5inch IPS capacitive touch screen, 800 x 480 resolution 2. Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4 (CM3/3+/4 requires extra adapter board) 3. The LCD is directly driven by Raspberry Pi DPI interface 4. Backlight can be turned off to lower power consumption 5. Toughened glass capacitive touch panel, 5-points touch 6. Compact size, suit for various projectsDevice & System Support1. Support Raspberry Pi OS, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver freePackage List1. 5 inch DSI LCD (B) x 1 2. FPC 15PIN 1.0 pitch 50mm (opposite sides) x 1 3. Screws pack x 1

Read more less

1. Resolution: 800 x 4802. Display interface: DSI3. Display panel: IPS4. Viewing angle: 160 degrees5. Touch screen models:- Touch type: capacitive touch- Touch points: 5 points touch- Touch interface: I2C- Touch panel: tempered glass panel6. Application scenarios: smart home, automotive equipment, consumer electronics, industrial equipment, etc.7. Screen size: about 5 inch8. Size: no touch model about 12 x 7.58 x 0.51cm, touch model about 12.77 x 8.7 x 0.7cmFeatures:1. IPS display panel with good display performance and wide viewing angle of up to 160 degrees2. Integrated structure design, DSI one-line, easy to integrate integrated design, provide secondary development materials, help simple development3. Thinner and more space-saving, the driver circuit is integrated into the FPC, about 5mm thickness space can be4. Touch models capacitive five-point touch, flexible operation, through the I2C signal, lead to touch function, support five-point touch5. Touch model backlight brightness can be adjusted by software6. Support Raspberry Pi OS, 5-point touch, driver-free7. Support Ubuntu / Kali / WIN10 IoT, single-touch, driver-free8. Support Retropie, driver-free9. Support Pi 4B/3B+/3A+/3B/2B/B+/A+, some CM3/3+/4 backplanes need to buy adapter cable separately

Read more less

1. Resolution: 800 x 4802. Display interface: DSI3. Display panel: IPS4. Viewing angle: 160 degrees5. Touch screen models:- Touch type: capacitive touch- Touch points: 5 points touch- Touch interface: I2C- Touch panel: tempered glass panel6. Application scenarios: smart home, automotive equipment, consumer electronics, industrial equipment, etc.7. Screen size: about 5 inch8. Size: no touch model about 12 x 7.58 x 0.51cm, touch model about 12.77 x 8.7 x 0.7cmFeatures:1. IPS display panel with good display performance and wide viewing angle of up to 160 degrees2. Integrated structure design, DSI one-line, easy to integrate integrated design, provide secondary development materials, help simple development3. Thinner and more space-saving, the driver circuit is integrated into the FPC, about 5mm thickness space can be4. Touch models capacitive five-point touch, flexible operation, through the I2C signal, lead to touch function, support five-point touch5. Touch model backlight brightness can be adjusted by software6. Support Raspberry Pi OS, 5-point touch, driver-free7. Support Ubuntu / Kali / WIN10 IoT, single-touch, driver-free8. Support Retropie, driver-free9. Support Pi 4B/3B+/3A+/3B/2B/B+/A+, some CM3/3+/4 backplanes need to buy adapter cable separately

Read more less

1. 800 x 480 high resolution,Resistive touch control 2. Supports Raspberry Pi 3. Supports popular mini-PCs like Raspberry Pi, BB Black, etc. 4. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 5. Backlight can be turned off to lower power consumption

Read more less

1. 800x480 hardware resolution, configurable by software (up to 1920x1080) 2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free 3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. 4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 5. 3.5mm audio jack, speaker connector, supports HDMI audio output 6. Also supports VGA input (specific cable is required and should be purchased separately)

Read more less

1. 800x480 hardware resolution, configurable by software (up to 1920x1080) 2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free 3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. 4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 5. 3.5mm audio jack, speaker connector, supports HDMI audio output 6. Also supports VGA input (specific cable is required and should be purchased separately)

Read more less

1. 800x480 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.5. 3.5mm audio jack, speaker connector, supports HDMI audio output6. Also supports VGA input (specific cable is required and should be purchased separately)

Read more less

1. 800 x 480 high resolution,Resistive touch control 2. Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) 3. Drivers provided (works with your own Raspbian/Ubuntu directly) 4. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) 5. Backlight can be turned off to lower power consumption 6. High quality immersion gold surface plating

Read more less

Device & System SupportRaspberry Pi 1. Support Raspbian, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver free 4. Support all versions of Raspberry Pi PC Support Windows 10 / 8.1 / 8 / 7, 5-points touch, driverTouch Control1. Up to 5-points touch, depending on the operating system. 2. Up to 6H hardness toughened glass panel.Package List1. 5 inch HDMI LCD (H) V4 x1 2. HDMI cable x1 3. HDMI to Micro HDMI Adapter x1 4. USB type A plug to micro B plug cable x1 5. RPi screws pack (4pcs) x1

Read more less

About The ProductI am a Raspberry Pi CM4 kit with a 5 inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users. Notes: 1. Do not plug and unplug any device except USB and HDMI while the baseboard is working. 2. If the fan needs to be replaced, please confirm the fan voltage and then power on. 3. The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface. 4. In normal use, it is necessary to provide at least 5V 2.5A power supply for CM4. Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on. 5. Onboard default 4-way USB 2.0 interface. 6. Support POE pins, additional POE HAT is required if POE function is required. 7. This screen needs to add a driver to work.Specifications1. CM4 Socket: Suitable for all variants of Compute Module 4 2. Networking: - Gigabit Ethernet RJ45 connector - M.2 M KEY, supports NVME SSD 3. POE: PoE header (additional PoE HAT is required to enable PoE feature) 4. USB: USB 2.0 x 4 5. Display: 5 inch screen, 800 x 480 pixels, 5-point capacitive touch 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 7. Video: HDMI, supports 4K 30fps output 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 10. Fan header: Allows speed adjustment and measurement, 5V / 12V 11. Power input: 5V 12. Size: 127.7 x 87.45mm

Read more less

Features1. 5inch IPS screen, 800x480 hardware resolution2. Compatible with Raspberry Pi 2B/3B/3B+/3A+/Zero/Zero W/Zero WH3. The LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz4. Supports Raspbian, Ubuntu, OSMC, etc.5. Backlight can be turned off to lower power consumption6. Compact size, suit for various projectsNote: This item can be used for displaying ONLY, if touch panel is required, please consider 5inch HDMI Capacitive Touch LCD OR 5inch HDMI Resistive Touch LCD.Package Contents1. 5inch 800×480 IPS LCD x12. RGB LCD HAT (B) x13. LCD stand (small size) x1

Read more less

OverviewThis is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.Features1. 5.5 inch AMOLED, 1080x1920 resolution2. Toughened glass capacitive touch panel, 6H hardness3. Support popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian / Ubuntu / Kali / Retropie, driver free5. When works as a computer monitor, support Windows 10/8.1/8/7, five-points touch, and driver free6. 3.5mm audio jack, supports HDMI audio output7. M2.5 screw holes for easy mountingPackage Contents1. 5.5inch HDMI AMOLED x12. HDMI cable x13. USB type A plug to micro B plug cable x14. HDMI adapter (B) x15. USB adapter (B) x16. Screws pack x1

Read more less

Features1. 5.5-inch IPS display with a hardware resolution of 1440 ?? 2560 2. 10-point capacitive touch control with toughened glass panel, hardness up to 6H 3. Adopt the optical bonding touch technique for better use 4. Support Raspberry Pi OS / Ubuntu / Kali and Retropie when working with Raspberry Pi 4B 5. Support Windows 11/10/8.1/8/7 when working as a computer monitor 6. Support HDMI audio output with 3.5mm Jack and 4PIN headerDevice & System Support1. For the moment, only the Raspberry Pi 4B and CM4 have adequate CPU performance to drive this 2K display completely. 2. Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B. 3. Limited by the hardware, when working with Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only supports default portrait display and cannot be rotated. 4. The case only supports Raspberry Pi 4B.Package List1. 5.5 inch 1440x2560 LCD x1 2. HDMI cable x1 3. USB type A plug to micro B plug cable x1 4. USB adapter (B) x1 5. HDMI adapter (B) x1 6. HDMI to Micro HDMI adapter (C) x1 7. USB adapter (D) x1 8. Screws pack x1

Read more less

Overview1. This is an E-Ink display HAT for Raspberry Pi, 5.83 inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano4. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.5. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specifications1. Operating voltage: 3.3V~5V2. Interface: SPI3. Outline dimension: 125.40mm x 99.50mm4. Display size: 118.80mm x 88.26mm5. Dot pitch: 0.198 x 0.1976. Resolution: 600 x 4487. Display color: Red, black, white8. Grey level: 29. Full refresh time: 14s10. Refresh power: 26.4mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degreePackage Contents1.5.83 inch e-Paper (B) x12. e-Paper Driver HAT x13. RPi screws pack (2pcs) x14. PH2.0 20cm 8Pin x1

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 648x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Dimensions: 125.4x99.5mm 10. Display size: 119.232x88.320mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.184 x 0.184mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 5.83 inch e-Paper x 1 2. Pico-ePaper-Driver-Board x 1 3. Standoff pack x 1

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 648x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Dimensions: 125.4x99.5mm 10. Display size: 119.232x88.320mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.184 x 0.184mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 5.83 inch e-Paper x 1 2. Pico-ePaper-Driver-Board x 1 3. Standoff pack x 1

Read more less

This is a MIPI_CSI camera with 5MP and 70 degree FOV. The onboard optical image stabilization camera module supports dual-axis image stabilization+/-5 degree compensation angle. Suitable for motion cameras, robots, wearables, and so on. Support Raspberry Pi, and Sunrise X3 Pi. Specifications: 1.Sensor :OV5647 2. CMOS Size: 1/4 inch 3. Pixel: 5MP 4. Aperture: F 2.8 5. Focal Length: 3.2mm 6. Angle of View: 70 degrees 7. Stabilization Type: OIS (Optical Image Stabilization) Stabilization 8. Focusing: Fixed focus 9. Distortion: Less than 1.0% 10. Range: XY axis +/- 5 derees 11. Image: 2592 x 1944 still image resolution 12. Video recording: 1920 x 1080p 30fps, 1280 x 720p 60fps, 640 ?? 480p 60fps, 640 x 480p 90fps

Read more less

600x448, 5.83inch E-Ink raw display, SPI interface, without PCBOverview1. This is an E-Ink raw display, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V2. Interface: 3-wire SPI, 4-wire SPI3. Outline dimension: 125.40mm x 99.50mm x 1.18mm4. Display size: 118.80mm x 88.26mm5. Dot pitch: 0.198 x 0.1976. Resolution: 600 x 4487. Display color: black, white8. Grey level: 29. Full refresh time: 3.5s10. Refresh power: 26.4mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degree

Read more less

1. 160x80 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect 2. SPI interface, requires minimal IO pins 3. 1x joystick and 2x user buttons for easy interacting 4. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specification 1. Operating voltage: 2.6 ~ 5.5V 2. Resolution: 160x80 pixels 3. Display color: 65K RGB 4. Communication interface: 4-wire SPI 5. Display panel: IPS 6. Display size: 21.70 x 10.80mm 7. Pixel size: 0.1356 x 0.135mm 8. Driver: ST7735S 9. Size: 52.00 x 25.00mm

Read more less

Device & System SupportSuitable for Raspberry Pi: 1. Support Raspberry Pi OS, 5-points touch, driver free 2. Support Ubuntu, single point touch, driver free 3. Support Pi 4BSpecifications1. Sensor: OV5647 2. CMOS size: 1/4 inch 3. Pixels: 5MP 4. Aperture: F2.4 5. Focal length: 3.89mm 6. Diagonal FOV: 72.9 degrees 7. Distortion: Less than 1.5% 8. Depth of field: 20cm above 9. Image: 2592 x 1944 still image resolution 10. Video: 1920 x 1080p 30fps, 1280 x 720p 60fps, 640 x 480p 60fps, 640 x 480p 90fpsPackage List1. 7 inch DSI LCD (with cam) kit x1 2. Black case kit x1

Read more less

Device & System SupportSuitable for Raspberry Pi: 1. Support Raspberry Pi OS, 5-points touch, driver free 2. Support Ubuntu, single point touch, driver free 3. Support Pi 4BSpecifications1. Sensor: OV5647 2. CMOS size: 1/4 inch 3. Pixels: 5MP 4. Aperture: F2.4 5. Focal length: 3.89mm 6. Diagonal FOV: 72.9 degrees 7. Distortion: Less than 1.5% 8. Depth of field: 20cm above 9. Image: 2592 x 1944 still image resolution 10. Video: 1920 x 1080p 30fps, 1280 x 720p 60fps, 640 x 480p 60fps, 640 x 480p 90fpsPackage List1. 7 inch DSI LCD x 1 2. FPC 15 PIN 1.0 pitch 50mm (opposite sides) x 2 3. FPC 15 PIN 1.0 pitch 120mm (opposite sides) x 1 4. 2 PIN wire 10cm x 1 5. Screws pack x 1

Read more less

1. IPS LCD screen, more natural gradient colors and more vivid display colors2. 170-degree wide viewing angle, excellent display performance3. High-quality picture, clear and bright4. The screen has more color details and a better visual experience5. Support capacitive 5-point touch6. Support adjusting brightness through software7. Display size: 7 inches8. Product size: 192.96 x 110.8mm9. Weight: 246g, 375gPacking list:-7 inch DSI LCD (B) x1-FPC 15PIN 1.0 pitch 50mm (opposite sides) x1-2PIN to PH2.0 2PIN cable 6cm x1-FPC 15PIN 1.0 pitch 160mm (opposite sides) x1-Screw pack x1

Read more less

1. IPS LCD screen, more natural gradient colors and more vivid display colors2. 170-degree wide viewing angle, excellent display performance3. High-quality picture, clear and bright4. The screen has more color details and a better visual experience5. Support capacitive 5-point touch6. Support adjusting brightness through software7. Display size: 7 inches8. Product size: 192.96 x 110.8mm9. Weight: 246g, 375gPacking list:-7 inch DSI LCD (B) x1-FPC 15PIN 1.0 pitch 50mm (opposite sides) x1-2PIN to PH2.0 2PIN cable 6cm x1-FPC 15PIN 1.0 pitch 160mm (opposite sides) x1-Screw pack x1

Read more less

1. 800 x 480 high resolution,Capacitive touch control 2. Supports popular mini-PCs like Raspberry Pi, BB Black, etc. -When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IoT, single touch, and driver free -When working with other mini-PCs, driver is required and should be developed by users 3. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 4. When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 5. Backlight can be turned off to lower power consumption 6. Note: to use the LCD with following mini-PCs( additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable)

Read more less

7inch HDMI LCD (C) Features1. 800 x 480 high resolution,Capacitive touch control 2. Supports popular mini-PCs like Raspberry Pi, BB Black, etc. -When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IoT, single touch, and driver free -When working with other mini-PCs, driver is required and should be developed by users 3. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 4. When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 5. Backlight can be turned off to lower power consumption 6. Note: to use the LCD with following mini-PCs( additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable)The Case1. Material : high quality bicolor Acrylic, black and white 2. Comes with bottom holder, optional tilt angle, 45 Celsius or 60Celsius 3. Features mounting holes for Raspberry Pi B/A+/B+/2B/3B/3B+, Banana Pi, and BB Black

Read more less

1. 7inch IPS screen, 1024 x 600 high resolution,Capacitive touch control 2.Supports popular mini-PCs like Raspberry Pi, BB Black, etc. -When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IoT, single touch, and driver free -When working with other mini-PCs, driver is required and should be developed by users 3. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 4. When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 5. Backlight can be turned off to lower power consumption 6. Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable

Read more less

1. IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers3. When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free4. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free5. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.3. 3.5mm audio jack, speaker connector, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)

Read more less

800x400, 7.5inch E-Ink display HAT for Raspberry Pi, SPI interface Overview 1. This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x400 resolution, with embedded controller, communicating via SPI interface. 2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features 1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano 4. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. 5. Onboard voltage translator, compatible with 3.3V/5V MCUs 6. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications 1. Operating voltage: 3.3V~5V 2. Interface: SPI 3. Outline dimension: 170.2mm x 111.2mm 4. Display size: 163.2mm x 97.92mm 5. Dot pitch: 0.255 x 0.255 6. Resolution: 640 x 384 7. Display color: black, white 8. Grey level: 2 9. Full refresh time: 6s 10. Refresh power: 38mW(typ.) 11. Standby power: <0.017mW 12. Viewing angle: >170 degree Package Contents 1. 7.5inch e-Paper x1 2. e-Paper Driver HAT x1 3. RPi screws pack (2pcs) x1 4. PH2.0 20cm 8Pin x1

Read more less

Overview1. This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W4. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.5. Onboard voltage translator, compatible with 3.3V/5V MCUs6. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V~5V2. Interface: SPI3. Outline dimension: 170.2mm x 111.2mm4. Display size: 163.2mm x 97.92mm5. Dot pitch: 0.255 x 0.2556. Resolution: 640 x 3847. Display color: red, black, white8. Grey level: 29. Full refresh time: 16s10. Refresh power: 38mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degree13. Weight: 0.065 kgPackage Contents1. 7.5 inch e-Paper (B) x12. e-Paper Driver HAT x13. RPi screws pack (2pcs) x14. PH2.0 20cm 8Pin x1

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Advantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmPackage List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1

Read more less

Overview1. This is an E-Ink display HAT for Raspberry Pi, 7.8 inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface, supports partial refresh.2. Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Low power consumption, basically power is only required for refreshing3. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards4. USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.5. Comes with development resources and manual (examples for Raspberry Pi/STM32)Specifications1. Operating voltage: 5V2. Interface: USB/SPI/I80/I2C3. Outline dimension: 173.8mm x 127.6mm x 0.78mm4. Display size: 158.184mm x 118.638mm5. Dot pitch: 0.0845mm x 0.0845mm6. Resolution: 1872 x 14047. Display color: Black, white8. Gray scale: 2-16 (1-4 bit)9. Full refresh time: 450ms10. Total refresh power: 1.2W(typ.)11. Total standby power: 0.1W(typ.)12. Viewing angle: >170 degree13. Weight: 77gPacking List:1. 7.8 inch e-Paper x12. e-Paper IT8951 Driver HAT (B) x13. 7.8 inch e-Paper Adapter x14. 33PIN FFC (same side contact) x15. USB type A plug to micro B plug cable x26. PH2.0 20cm 8Pin x17. RPi screws pack (2pcs) x1

Read more less

Features1. 7.9 inch IPS display with capacitive touch panel, hardware resolution is 400x1280. 2. Capacitive touch, supports up to 5-points touch. 3. Toughened glass capacitive touch panel, 6H hardness. 4. DSI interface, refresh rate up to 60Hz. 5. Working with Raspberry Pi, we provide the driver for Raspberry Pi OS. 6. Brightness is adjustable by software. 7. Support Pi 4B/3B+/3A+, CM3+/4 ,must be used with adapter cable.Package List1. 7.9 inch DSI LCD x 1 2. FPC 15PIN 1.0 pitch 50mm (opposite sides) x 2 3. Screws pack x 1

Read more less

1. 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920 x1080) 2. Toughened glass capacitive touch panel, 6H hardness 3. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers 4. When works with Raspberry Pi, supports Raspbian, Ubuntu, -WIN10 IOT, single touch, and driver free 5. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 7. 3.5mm audio jack, supports HDMI audio output 8. Also supports VGA input (specific cable is required and should be purchased separately) 9. High quality PC case, optional tilt angle: 30 Celsius /50 Celsius

Read more less

1. 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920 x1080)2. Toughened glass capacitive touch panel, 6H hardness3. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian, Ubuntu, -WIN10 IOT, single touch, and driver free5. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.7. 3.5mm audio jack, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)9. High quality PC case, optional tilt angle: 30?°/50?°

Read more less

1. 1024x600 high resolution 2. Compatible with Raspberry Pi 2B/3B/Zero/Zero W 3. The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz 4. Supports Raspbian, Ubuntu, OSMC, etc. 5. Backlight can be turned off to lower power consumption 6. Compact size, suit for various projects 7. Note: This item can be used for displaying ONLY

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1

Read more less

1. Features: high resolution, multi-touch, full color, built-in speakers, high compatibility2. Display size: 8 inches3. Resolution: 2K4. Pixel: 1536×20485. Audio interface: 3.5mm6. Touch: 10 points (MAX)7. Built-in ferrite Hi-Fi speaker, support dual-channel8. Tempered glass panel with a hardness of up to 6H, anti-fall and durable9. Optical bonding, good display, dustproof10. 2K high resolution, 1536×2048 pixels, clear display11. IPS display panel, 178-degree wide viewing angle, excellent display performance12. Touch the display screen, the operation is more convenient13. Product size: 190 x 119.8 x 11mm14. Weight: 632 gramspacking list:-LCD screen x 1-Tripod x 1-1m HDMI cable x 1-1m USB-A to USB-C Cable x 1-1m HDMI to Micro HDMI cable x 1-5V 3A Type-C Adapter x 1

Read more less

Device & System SupportFor Raspberry Pi 1. Support Raspberry Pi OS, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver free 4. Support Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4 Note: CM3/3+/4 requires extra adapter boardFeatures1. LCD FFC cable anti-interference design, more stable for industrial application 2. VCOM voltage adjustment for optimizing display effect 3. Power supply via pogo pins, eliminating messy wiring 4. Two types of 5V output headers, for connecting cooling fan or other low power devices 5. Reversed camera hole on the touch panel, allows integrating external camera 6. Large front panel design, make it easy to match user-defined cases, or to be integrated into sorts of devices 7. Adopt SMD nuts for holding and fixing the board, more compact structurePackage List1. 8 inch DSI LCD x 1 2. FPC 15 PIN 1.0 pitch 50mm (opposite sides) x 2 3. 2 PIN wire 10cm x 1 4. Screws pack x 1

Read more less

OverviewThe RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi. It gives your Pi the ability to control high voltage products such as home appliances.Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Standard rail mount bottom case5. Onboard LEDs for indicating relays status6. Relay control pin selection jumper, allows to control the relays by custom pins other than the default pins7. Reserved control Interface, allows to work with controllers like PLC8. Comes with development resources, including examples in wiringPi, bcm2835, python, python-bottle (webpage control), and crontab (cron job)Specifications1. Power supply voltage: 5V2. Trigger signal: 3.3V/5V3. Relay channels: 8-ch4. Contact form: SPDT-NO,NC5. Closed current: 6mA (per channel)6. Connector: screw terminal block7. Dimension: 232 × 72 (mm)8. Mounting hole size: 3.0mm

Read more less

Overview1. This is an E-Ink raw display, 9.7inch, 1200x825 resolution, communicating via parallel port.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Low power consumption, basically power is only required for refreshing3. Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/STM32)Specifications1. Operating voltage: 5V2. Interface: parallel port3. Outline dimension: 218.8mm x 156.425mm x 1.15mm4. Display size: 202.8mm x 139.425mm5. Dot pitch: 0.169 x 0.1696. Resolution: 1200 x 8257. Display color: black, white8. Gray scale: 2-16 (1-4 bit)9. Full refresh time: <1s10. Viewing angle: >170 degree11. Weight: 0.09 kg12. Note: This is a raw display, for easy testing and comparing, please consider the one with driver board: 9.7inch e-Paper HAT

Read more less

Features:1. 10.3-inch e-ink display with a resolution of 1200 x 825 (150DPI)2. Display advantages: Eye care, no blue light, close to the paper-like experience3. Display Environment: Visible under ambient light4. Display mode: Passively reflective5. Support mode and contrast adjustment6. Support Raspberry Pi, Jetson Nano, and computersSpecification:1. Resilution: 1200 x 825 pixel2. PPI: 1503. Panel: Anti-glare toughen glass4. Refresh Rate: 15Hz (the maximum refresh rate of A2/A2+ mode)5. Aspect Ratio: 16:116. Display Dimension: 202.8 x 139.425 mm7. Outline Dimension: 238.3 x 168 mm8. Thickness:9.5 mm9. Net Weight: 501g10. Vesa Stand Hole Spacing: 50mmPackage List:1. EINK-DISP Monitor x 12. Mini HDMI to HDMI cable 1.5m x 13. HDMI to Micro HDMI Adapter x 14. 5V 3A Power Adapter x 15. Package Box x 16. Leather Case x 1

Read more less

Features:1. 10.3-inch e-ink display with a resolution of 1200 x 825 (150DPI)2. Display advantages: Eye care, no blue light, close to the paper-like experience3. Display Environment: Visible under ambient light4. Display mode: Passively reflective5. Support mode and contrast adjustment6. Support Raspberry Pi, Jetson Nano, and computersSpecification:1. Resilution: 1200 x 825 pixel2. PPI: 1503. Panel: Anti-glare toughen glass4. Refresh Rate: 15Hz (the maximum refresh rate of A2/A2+ mode)5. Aspect Ratio: 16:116. Display Dimension: 202.8 x 139.425 mm7. Outline Dimension: 238.3 x 168 mm8. Thickness:9.5 mm9. Net Weight: 501g10. Vesa Stand Hole Spacing: 50mmPackage List:1. EINK-DISP Monitor x 12. Mini HDMI to HDMI cable 1.5m x 13. HDMI to Micro HDMI Adapter x 14. 5V 3A Power Adapter x 15. Package Box x 16. Leather Case x 1

Read more less

Features:1. 10.3-inch e-ink display with a resolution of 1200 x 825 (150DPI)2. Display advantages: Eye care, no blue light, close to the paper-like experience3. Display Environment: Visible under ambient light4. Display mode: Passively reflective5. Support mode and contrast adjustment6. Support Raspberry Pi, Jetson Nano, and computersSpecification:1. Resilution: 1200 x 825 pixel2. PPI: 1503. Panel: Anti-glare toughen glass4. Refresh Rate: 15Hz (the maximum refresh rate of A2/A2+ mode)5. Aspect Ratio: 16:116. Display Dimension: 202.8 x 139.425 mm7. Outline Dimension: 238.3 x 168 mm8. Thickness:9.5 mm9. Net Weight: 501g10. Vesa Stand Hole Spacing: 50mmPackage List:1. EINK-DISP Monitor x 12. Mini HDMI to HDMI cable 1.5m x 13. HDMI to Micro HDMI Adapter x 14. 5V 3A Power Adapter x 15. Package Box x 16. Leather Case x 1

Read more less

1. ABS protection case For Raspberry Pi Zero Series, Fits Zero / Zero 2 W 2. Protective cover is sturdy and long-lasting, designed with compact size and light weight. 3. Precise Opening Design: Reversed GPIO slot and openings for sorts of connectors 4. Easy to install 5. Package Content: - Raspberry Pi Zero case x 1 - Screwdriver x 1 - Screws pack x 1

Read more less