DJI & GoPro Accessories

1. Easy to use, easy to install2. Made of high quality material and durable3. For mounting to the bottom of the camera to fix on the Ronin 2 head4. Packing list: fixing plate x 15. Compatible products: DJI Ronin 2

Read more less

1. Using Ronin 2 tripod adapter, you can remove the camera equipment from Ronin 2 without removing the bottom fixing plate of the camera, you can directly mount the camera on the tripod2. The bottom screw ports are 1/4 inch and 3/8 inch, adaptable to a variety of tripod quick release plate to meet the needs of shooting3. Packing list: Ronin 2 tripod adapter x 14. Compatible products: DJI Ronin 25. Weight: about 175g

Read more less

1. MMCX to SMA conversion cable, connecting for DJI FPV air unit and the antenna (SMA head) for the air unit2. The SMA head of this product is an external threaded internal needle3. MMCX straight/elbow: SMA are standard parts, the length is 83mm4. Compatible products: suitable for DJI FPV air system5. Packing list: adapter cable x 2

Read more less

1. Compatible products: DJI RS 2, DJI RSC 2, DJI RS 32. Provide counterweight for the situation where the roll axis cannot be leveled3. Mainly for machines whose roll axis may not be directly leveled, such as BMPCC 4K/6K+, etc.4. Two kinds of gram weight counterweights, you can counterweight according to your needsPacking list:-Pitch motor weight clamp x 1-200g counterweight x 2-100g counterweight x 2

Read more less

1. The module cable can connect the Ronin-S external GPS module to DJI RS 2/DJI RS 3 Pro2. Improve the stability of the gimbal during rapid acceleration, reduce the impact of acceleration on the sensor, and avoid image distortion3. Compatible products: DJI RS 3 Pro, DJI RS 24. Reminder: The Ronin-S external GPS module is not included in the module connection cable and needs to be purchased separately!Packing list:Module cable x 1

Read more less

1. Using magnetic quick release design, increase the positioning column, strong impact resistance, can be firmly connected with the camera2. The bottom of the adapter structure to adapt to most traditional sports camera accessories, the use of more diverse3. Compatible products: DJI Osmo Action 34. Packing list: Osmo Action 3 quick release adapter x 15. Dimensions: about 4.02 x 2.1 x 3.42cm6. Weight: about 16g

Read more less

1. It is only the size of your palm when folded, and you can start shooting immediately after unfolding2. The built-in extension pole helps you unlock selfies, low angles and more creative perspectives3. A variety of intelligent functions to meet various shooting scenarios4. Magnetic suction design, you can quickly connect to your phone and start shooting without removing the protective case, and it is super convenient to take off the phone5. A new status display panel is added, which is convenient for viewing battery power, system indicator status, and gimbal mode. With the M button, it is easy to switch between four gimbal modes to meet different camera movement needs6. The side dial is added to switch focus and zoom functions freely. Slide the dial to adjust the focal length, making the composition more flexible and enjoying the silky zoom effect. Short press the dial to switch to manual focus mode, making the picture more cinematic7. Expanded dimensions: Length 276mm, Width 111.5mm, Height 99mm8. Folded size: length 189mm, width 84.5mm, height 44mm9. Weight: About 309 grams for the gimbal; about 31 grams for the magnetic mobile phone clip; about 72 grams for the tripod10. Applicable mobile phone weight: 170g to 290g11. Applicable mobile phone thickness: 6.9mm to 10mm12. Applicable mobile phone width: 67mm to 84mm13. Battery: Li-Po 2S14. Capacity: 1000mAh15. Energy: 7.74 Wh16. Working time: about 6 hours and 24 minutes (test reference value under the condition of balance adjustment)17. Charging time: Approx. 1 hour 24 minutes (measured with a 10W charger)18. Gimbal charging port: USB-C19. Structural rotation range:- Pan: -161.64 degrees to 173.79 degrees- Roll: -120.30 degrees to 211.97 degrees- Pitch: -101.64° to 78.55°20. Control speed: 120 degrees/s (MAX)21. Bluetooth version: 5.122. Software: App DJI Mimo

Read more less

1. The portable adapter can be used with the DJI R handle extension tripod, which can quickly realize the shooting in portable mode2. Adopt NATO quick-release design, easy to disassemble and assemble, compact and easy to store3. Dimensions: 180 x 60 x 30mm4. Weight: 150 grams5. Compatible products: DJI RS 3, DJI RS 3 Pro, DJI RS 2, DJI RSC 2Packing list:Portable adapter x 1

Read more less

1. Compatible products: DJI RS 2, DJI RS 3 Pro2. Through the control handle, the gimbal can be controlled by wire to realize long-distance follow focus, video recording, joystick and other control functions3. Remote power supply can be realized through the gimbal power supply adapter and battery power adapter with the handle battery4. Through this combination, DJI RS 2/DJI RS 3 Pro can be better suitable for shooting scenes such as vehicles, slide rails, ropeways, and rockersPacking list:-Control handle × 1-Gimbal power adapter × 1-Bottom plate × 1-1/4''-20 screw × 5-Wrench (4 mm) × 1-Wrench (2.5 mm) × 1-Battery Power Adapter × 1-Control wire (30 cm) × 1-Control wire (5m) x 2-Control handle communication interface adapter × 1-Strengthening rod × 1-Safety Buckle × 1

Read more less

1. Compatible products: DJI RS 2, DJI RS 3 Pro2. Cooperate with multi-form dual-hand-held, in the dual-hand-held mode, a series of operations such as dormancy, video recording, and focus can be realized on the control handle held3. In the case of long-distance control, such as vehicle, rocker, etc., it can be controlled by wire (wire control distance is 5 meters, you need to purchase the Ronin Vehicle Extension Kit to obtain a 5-meter control cable)4. The control handle is equipped with a NATO interface and a cold shoe interface, and the image transmission monitor can be installed on the handle; a focus wheel can also be installed on the side of the handle to realize the corresponding functionPacking list:-Control handle × 1-Control handle communication interface adapter × 1-Control wire (30 cm) × 1

Read more less

1. On the DJI RS 2, the focus motor can be used with the DJI R follow focus wheel or the front dial to realize the focus, zoom or aperture adjustment of the camera lens2. Installing two Ronin follow focus motors on the DJI RS 2 can realize a dual channel follow focus system (DJI R follow focus wheels need to be purchased separately)3. Note: The DJI R focus motor can be used with the front dial to control the follow focus, zoom or aperture of the camera lens on the DJI RSC 2, but the DJI R follow focus wheel is not suitable for the DJI RSC 2Product parameters:1. Torque: 0.27 Nm (MAX)2. Operating speed: 100 RPM (MAX)3. Working voltage: 5V/8V4. Mounting hole size: 12 mm5. Working temperature: minus 20-45 degrees Celsius6. Adaptive lens diameter range of follow focus rack: 30-110 mm7. Total length of follow focus rack: 377 mm8. Dimensions: 71×47×34mm9. Weight: 88g10. Compatible products: DJI RS 2, DJI RSC 2Packing list-Follow focus motor × 1-fixed components × 1-12 mm conduit × 1-M4 screws (10 mm) × 4-Follow focus gear follow focus rack × 1-Camera control cable (USB-C, 30 cm) × 1-Wrench (3 mm) × 1

Read more less

1. Omni-directional control PTZ, support zoom control (only support Pocket 2), PTZ mode switching2. Directly control the direction and zoom of the gimbal, easy to operate3. Using physical buttons, good hand feel and sensitive feedback4. The right button can quickly switch the gimbal mode5. Compatible products: suitable for DJI Pocket 2 / Osmo Pocket6. Dimensions: 27.6x13.2x10.5mm7. Weight: 2.1g

Read more less

1. Compatible products: DJI RS 2, DJI RSC 2, DJI RS 3, DJI RS 3 Pro, DJI RS 3 Mini2. Use the elbow end to connect the camera. When the gimbal rotates, the camera control line and the gimbal will not interfere with each other, thus avoiding damage to the camera and control line3. Specifications: Type-C/USB-C to Type-C/USB-C4. Length: 30cm5. Reminder: It is recommended to use the elbow end to connect the camerapacking list:-USB-C elbow control cable x 1

Read more less

1. 15mm equivalent focal length for a wider field of view 2. Magnetic connector design for easy removal and installation 3. Magnetic design for easy access and storage in a protective case 4. 110 degree FOV for DJI Pocket 2; 90 degree for Osmo Pocket 5. Fitted products: for DJI Pocket 2 / Osmo Pocket 6. Dimensions: 17.8x15.2x6.7 mm 7. Weight: 3.3g 8. Note: Product includes lens only, nothing else

Read more less

1. MMCX to SMA conversion cable, connecting for DJI FPV air unit and the antenna (SMA head) for the air unit2. The SMA head of this product is an external threaded internal needle3. MMCX straight/elbow: SMA are standard parts, the length is 83mm4. Compatible products: suitable for DJI FPV air system5. Packing list: adapter cable x 2

Read more less

1. Powerful wireless radio system, which can achieve a wireless radio distance of up to 250 meters2. The transmitter can record, regardless of human voice, ambient sound or instrument sound, it can be recorded clearly, and it has built-in storage, which can be used as a recording pen alone, and can also back up the sound during recording to ensure the integrity of the recording data3. The charging box can quickly pair the receiver and the transmitter, and charge them in real time. It can also store some accessories in one piece. It is easy to carry and fully charged after opening the cover.4. The two transmitters can record at the same time, and have built-in storage, which can record independently, and you can use it as a recording pen; it also supports sound backup to ensure the integrity of the recording data to the greatest extent5. The transmitter adopts a clip-back design and is equipped with magnetic accessories, which can be easily fixed on clothes. The receiver can also be mounted on the cold shoe/hot shoe with the help of the hot shoe conversion plate, and the installation is very flexible6. The receiver supports USB-C, Lightning and 3.5mm TRS interface output, compatible with mainstream mobile phones, various cameras and computers7. Standard charging box (optional), with a sense of security, the charging box can charge the receiver and transmitter in real time, the battery life is up to 15 hours, and the creation is not limitedLauncher:1. Dimensions: Length 47.32mm, Width 30.43mm, Height 20.01mm2. Weight: 30g3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5.5 hoursReceiver:1. Dimensions: Length 47.44mm, Width 32.21mm, Height 17.35mm2. Weight: 24.9 grams3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5 hoursCharging case:1. Dimensions: Length 103.06mm, Width 61.87mm, Height 41.50mm2. Weight: 162.2 grams3. Battery type: LiPo 1S4. Battery capacity: 2600mAh5. Battery power: 10 Wh6. Battery voltage: 3.87 volts7. Charging time: 2 hours and 40 minutes8. Working time: 3 charges at the same time, about 1.8 times of charging9. General: microphone directivity10. Low cut off: 50 Hz to 20 kHz11. Low cut function on: 150 Hz to 20 kHz12. Sound pressure level (MAX): 114 dB SPL13. Input level (3.5mm): -17 dBV14. Equivalent noise: 23 dBA15. Output power (MAX): 22 mW@1 kHz, 32 Ω16. Transmission distance (MAX): 250 meters (FCC); 160 meters (CE) measured in an open outdoor environment without interference

Read more less

1. Compatible products: Osmo Mobile series; Osmo Pocket series; Osmo Action series2. Designed for small handheld devices3. Small and smart, reasonable layout4. It can prevent rain and splash to a certain extent5. The design is simple and dynamic6. Exclusive storage, light and portable7. Comfortable hand feeling and rich functions8. Weight: 380 grams9. Dimensions: 240x170x80mmPacking list:- Shoulder bag x 1

Read more less

1. Powerful wireless radio system, which can achieve a wireless radio distance of up to 250 meters2. The transmitter can record, regardless of human voice, ambient sound or instrument sound, it can be recorded clearly, and it has built-in storage, which can be used as a recording pen alone, and can also back up the sound during recording to ensure the integrity of the recording data3. The charging box can quickly pair the receiver and the transmitter, and charge them in real time. It can also store some accessories in one piece. It is easy to carry and fully charged after opening the cover.4. The two transmitters can record at the same time, and have built-in storage, which can record independently, and you can use it as a recording pen; it also supports sound backup to ensure the integrity of the recording data to the greatest extent5. The transmitter adopts a clip-back design and is equipped with magnetic accessories, which can be easily fixed on clothes. The receiver can also be mounted on the cold shoe/hot shoe with the help of the hot shoe conversion plate, and the installation is very flexible6. The receiver supports USB-C, Lightning and 3.5mm TRS interface output, compatible with mainstream mobile phones, various cameras and computers7. Standard charging box (optional), with a sense of security, the charging box can charge the receiver and transmitter in real time, the battery life is up to 15 hours, and the creation is not limitedLauncher:1. Dimensions: Length 47.32mm, Width 30.43mm, Height 20.01mm2. Weight: 30g3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5.5 hoursReceiver:1. Dimensions: Length 47.44mm, Width 32.21mm, Height 17.35mm2. Weight: 24.9 grams3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5 hoursCharging case:1. Dimensions: Length 103.06mm, Width 61.87mm, Height 41.50mm2. Weight: 162.2 grams3. Battery type: LiPo 1S4. Battery capacity: 2600mAh5. Battery power: 10 Wh6. Battery voltage: 3.87 volts7. Charging time: 2 hours and 40 minutes8. Working time: 3 charges at the same time, about 1.8 times of charging9. General: microphone directivity10. Low cut off: 50 Hz to 20 kHz11. Low cut function on: 150 Hz to 20 kHz12. Sound pressure level (MAX): 114 dB SPL13. Input level (3.5mm): -17 dBV14. Equivalent noise: 23 dBA15. Output power (MAX): 22 mW@1 kHz, 32 Ω16. Transmission distance (MAX): 250 meters (FCC); 160 meters (CE) measured in an open outdoor environment without interference

Read more less

1. Installation method: quick release2. For DJI Ronin 4D3. Installed at the interface of the Ronin 4D control handle4. It can be used to transfer GPS modules and other accessories5. Solve the problem of horizontal skew of Ronin 4D during high-speed sports such as car shooting6. Weight: about 474 gramspacking list:- Control handle interface multi-function adapter x 1

Read more less

1. 150 degrees wide angle of view to present the picture, 4K/60fps shooting, clear records, RockSteady stabilization support, to bring a stable and smooth FPV aerial photography experience 2. High-definition and low-latency digital image transmission, dual-band adaptive switching, stable signal transmission and reception, smooth flight 3. Support emergency brake hovering, with intelligent return, low battery return, forward-looking and downward-looking obstacle detection and other functions, safety and security 4. Can be used with DJI FPV flight glasses V2 and DJI FPV remote control 5. High maneuverability, progressive flight gear 6. Support 2.4GHz/5.8GHz dual-band adaptive switching, image transfer bit rate up to 50 Mbps, strong anti-interference ability, effectively reduce screen lag and dragging shadow 7. 4 antenna design, signal transmission stability 8. Camera main camera pixel number: 12 million 9. Perception system: real-time image transmission quality 810p 10. Aircraft battery capacity: 44.4Wh (Not included battery) 11. Flight time: up to 20 minutes 12. Wind speed: up to 6 wind 13. Image format: JPEG 14. Airframe weight: about 795g 15. Note: only the drone is included, no other accessories

Read more less

1. It can charge the FPV intelligent flight battery, remote controller and goggles battery at the same time.2. Multiple output interfaces and output modes.3. 90W output power, fast charging.4. Input: 100 - 240 V, 50/60 Hz, 1.8 A5. output:- Battery interface: 25.2 V +/- 0.1 V; 3.57 A +/- 0.1 A (high current gear); 1 A +/- 0.2 A (low current gear)- USB interface: 5V / 2A (two)6. Rated power: 86WWarm Reminder: The charger does not include an AC power cord.

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. Equipped with a NATO interface, it supports quick disassembly and assembly, and can hold the gimbal with both hands for shooting3. In the two-handed mode, the low-angle handheld mode can be quickly switched without disassembly, and different usage modes can be selected according to actual needs4. The left and right rails are equipped with 3/8'' threaded interface, 1/4''-20 threaded interface and cold shoe interface, which support the installation of accessories with corresponding interfaces5. After replacing the mechanical handle on one side with a control handle and connecting a short control cable, a series of operations such as sleep, video, joystick, and focus can be realized on the handlePacking list:- Left crossbar x 1- Right crossbar x 1- Handle grip x 2

Read more less

1. Material: aluminum alloy2. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 23. One-piece body design4. CNC processing, surface anodic anti-oxidation treatment5. Durable and convenientpacking list:Lower quick release plate x 1

Read more less

1. Convert Type-C interface to Micro-USB interface to control Fuji X-H1, X-T2 series cameras2. Small size, lightweight and portable3.Type-C interface, suitable for a variety of cameras4. Interface: Type-C to Micro USB5. Length: 28 mm6. Compatible products: Ronin SCPacking list:Adapter x 1

Read more less

1. Double cold shoes, switch between horizontal and vertical shooting, quick release structure, all aluminum alloy2. Dual cooling shoes double the expansion, and can be connected with external microphones and flashlights3. The magnetic suction part at the bottom is hollowed out, which can be transferred to the original magnetic suction base, and the magnetic suction card slot is added on the side, and the second cuts vertical shooting4. Toggle the buckle to quickly disassemble, and close the side cover to lock automatically5. Made of aluminum alloy, anti-fall and wear-resistant, strong protection6. Open the mold of the real machine, avoid the empty charging port on the side, and cooperate with the charging selfie stick to realize charging and shooting at the same time7. The surface is sandblasted and oxidized to cope with various complex shooting environments8. Compatible models: Compatible with DJI Osmo Action 39. Precautions: Do not place it in a humid place for a long time, and do not squeeze it and drop it10. Note: The product only includes a protective frame, nothing else11. Material: aluminum alloy12. Size: 82.6x56.1x31.8mm13. Weight: 55g

Read more less

1. Compatible with most action cameras and mobile phones on the market2. Silicone collar designed to fit the neck better, comfortable to wear for a long time3. Magnetic quick release connector for quick disassembly and assembly of the camera4. Flexible silicone collar, the tough material is not easy to break5. Smart hanging neck button, one key to open, easy to operate6. Closed-loop hanging neck, stable and firm without falling off7. There is a silicone protective layer on the outside, which is soft and non-slip, and there is a stainless steel gooseneck + aluminum strip inside, which is not easy to break8. Applicable models: suitable for all kinds of sports cameras9. Multi-angle adjustment to meet the needs of various shooting angles10. One pull and use, simple design, easy to operate, quick to wear11. Material: Silicone12. Size: 180x130mm13. Weight: 170gProduct List:-1 x Halter bracket/screw rod-1 x Adapter-1 x Product manual-1 x Packing box

Read more less

1. Compatible with most action cameras and mobile phones on the market2. Silicone collar designed to fit the neck better, comfortable to wear for a long time3. Magnetic quick release connector for quick disassembly and assembly of the camera4. Flexible silicone collar, the tough material is not easy to break5. Smart hanging neck button, one key to open, easy to operate6. Closed-loop hanging neck, stable and firm without falling off7. There is a silicone protective layer on the outside, which is soft and non-slip, and there is a stainless steel gooseneck + aluminum strip inside, which is not easy to break8. Applicable models: suitable for all kinds of sports cameras9. Multi-angle adjustment to meet the needs of various shooting angles10. One pull and use, simple design, easy to operate, quick to wear11. Material: Silicone12. Size: 180x130mm13. Weight: 170gProduct List:-1 x Halter bracket/screw rod-1 x Adapter-1 x Product manual-1 x Packing box

Read more less

1. Compatible with DJI RS 3 Mini2. CNC finishing metal fixing ring, high strength, high hardness and durability3. Double hanging buckles ensure the balance of force at the joint and improve stability4. Soft and comfortable shoulder strap, decompression and breathable, quick release and quick assembly5. Big head metal hook, strong load-bearing capacity6. The length of the shoulder strap is adjustable, and the length range of folding in half: 55.5-76.5cm, suitable for users of different heights7. The inner wall of the fixed ring is non-slip soft pad, soft and scratch-resistant, increasing friction to lock the body firmly8. Soft and breathable, thick mesh fabric inside9. Tough and durable, tight nylon webbing10. High-strength tensile, precision stitching + hemming11. Load bearing: 2-5 kg12. Material: cloth + nylon webbing + leather + metal13. Size: 14x8x6cm14. Net weight: 177g (including fixing ring)15. Gross weight: 202gPacking list:-1 x wrench-1 x shoulder strap-1 x retaining ring-2 x screws

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. It can be used to support and fix a variety of camera lenses to make the shooting effect more stable3. It has a large adjustable range, and the user can adjust it through the knob on the bracket4. Super Stabilization mode needs to be used with this accessory to work normally (Ronin-S and Ronin-SC can also use this lens mount, but Super Stabilization mode cannot be used)5. Stand size: 56 x 54 x 19 mm6. Strap size: 410 x 10mm (unfolded)7. Stand weight: 16.1 grams8. Strap weight: 3.7 grams9. Knob weight: 3.5 gramsPacking list:- Strap x 1- Bracket x 1- Knob x 1

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Translucent design, easy to observe the protection status of the gimbal2. Fit the fuselage design, stable and not loose3. Provide multi-directional protection for the lens to prevent foreign objects from colliding and dust4. Fix the head, protect the lens from being scratched at all times during transportation, and prolong the service life of the machine5. For DJI MINI 36. Note: The product only includes the lens protection cover, and does not include other items of the drone7. Material: plastic

Read more less

1. With a unique foldable design, it is easy to store and adjust the direction at will2. Stabilize the effect number and provide a wealth of shooting functions3. Equipped with four kinds of connecting wires and various installation accessories4. Storage bag design, more convenient to carryPacking list:Gimbal main body x 1BG18 handle x 1Handle Extension Tripod x 1Camera quick release plate x 1Camera Pad Module x 1Phone clip x 1Lens Fixing Bracket x 1Interface protection cover x 2wrench x 2Camera Mount Screw 1/4"-20 x 3screw M4 x 4Multi camera control cable x 1Type-C camera control cable x 1USB-C cable x 1Camera Adapter (Type-C to Micro-USB) x 1Suitcase x 1

Read more less

1. Install and uninstall your device quickly and easily2. Applicable models: suitable for sports cameras/mobile phones3. Material: aluminum alloy4. Note: The product only includes the bracket, nothing else5. Size: 190x170x45mm

Read more less

1. The unique two-in-one design is not only a protective cover, but also a hood. Two-stage shading, free viewing angle2. Effectively protect the screen, buttons, joystick3. One button to close, avoiding repeated disassembly and assembly of the joystick4. Equipped with lifting eye screws, it is convenient to use the lanyard while locking the protective cover5. It fits the shape of RC PRO, effectively prevents the screen from being squeezed and scratched, and prevents accidental button touches6. Precisely cut holes, do not block the buttons and indicators, and do not affect the touch screen7. Compatible products: DJI RC Pro / Mavic 3 Classic / Mavic 3 / Mavic 3 Cine / Mini 3 Pro / Air 2S8. Material: plastic9. Net weight: 93g10. Gross weight: 138g

Read more less

1. Shockproof and drop-resistant, effectively protect your camera2. The anti-skid design of fuel injection will not damage the fuselage, and the protective frame has reserved sound holes to improve the shooting experience3. The angle can be adjusted to meet different shooting needs4. Can be used with selfie sticks, tripods, backpack clips, suction cup holders, bicycle clips, etc.5. Applicable models: suitable for Gopro Hero 11Black mini6. Material: PC+ABS fuel injection process7. Packing list: frame, base, screw8. Size: 6.2x3.6x5.4cm9. Weight: 45g10. Note: the product contains only protect the borders, not including the camera other items

Read more less

1. Storage function, impact resistance, waterproof and dustproof, semi-opening design2. Sturdy protection, drop resistance and compression resistance, the hard layer is made of EVA material, which reduces the impact strength of objects such as extrusion and dropping3. The real machine is molded, the size is adapted, and the lens space is reserved to effectively protect the lens part4. Half-open zipper design, without removing the tripod and other accessories, it can be opened and used immediately5. PU outer layer, rainproof and dustproof6. Compatible design, bare metal and after installing the rabbit cage two state interface use7. Soft and scratch-free, the inner lining is made of velvet material to prevent the lens and screen from being scratched8. Portable, small and convenient, light travel9. Compatible models: for DJI Osmo Action 310. Material: PU, EVA, velvet11. Weight: 36.8g12. Size: 10.1x7x4.25cmPrecautions:1. The product needs to be stored in a cool, ventilated and dry place, and the storage temperature should not be higher than 40 degrees2. Do not touch the source3. Do not soak in water, please air dry as soon as possible after soaking in water

Read more less

1. The large-capacity suit bag can store gimbal, tripod, quick release plate, MIC charging box, MIC receiver and transmitter, as well as data cables, mobile phone connectors, Mic windproof fleece and other small accessories2. Precise mold opening, stable storage of machines and accessories, shock absorption and drop resistance, meticulous care3. It can be carried on one shoulder, and the length of the shoulder strap can be adjusted freely4. Reasonable partition, a full set of storage5. The shock-absorbing and pressure-resistant shell can effectively relieve external impact and provide effective protection for the fuselage6. The liner is made of soft fabric to prevent scratches7. Exquisite and smooth zipper, rigorous stitching8. Durable handle, easy to carry without tired hands9. Applicable models: suitable for DJI RS 3 Mini10. Material: fabric + fabric lining11. Dimensions: 310 x 226 x 108mm12. Net weight: 653g13. Gross weight: 759g

Read more less

1. Using the principle of Yagi antenna, formulate Mavic series universal booster, enhance the antenna model, under the same signal interference strength of the flight environment, the distance of the aircraft can be increased by 50-500 meters 2. Using ABS+ pure copper, after anodic oxidation treatment, enhance the texture, wear resistance, corrosion resistance 3. Simple and fast installation and disassembly, no need to change the control, plug and play, non-destructive installation design 4. Small size, easy to carry 5. Size: 7.2x6.5cm

Read more less

1. Using the principle of Yagi antenna, formulate Mavic series universal booster, enhance the antenna model, under the same signal interference strength of the flight environment, the distance of the aircraft can be increased by 50-500 meters 2. Using ABS+ pure copper, after anodic oxidation treatment, enhance the texture, wear resistance, corrosion resistance 3. Simple and fast installation and disassembly, no need to change the control, plug and play, non-destructive installation design 4. Small size, easy to carry 5. Size: 6.4 x 3cm

Read more less

1. Practical and large capacity. It can store gimbal, tripod, charger, MIC charging box, MIC receiver and transmitter, camera, portable transfer handle, and small accessories such as quick release plate, data cable, mobile phone connector, Mic windproof holster2. Professional waterproof, the safety box is tightly closed and sealed, which can effectively prevent water seepage and leakage when splashing or sprinkling water3. High-strength, drop-resistant, compressive, corrosion-resistant, high and low temperature resistant4. Super impact-resistant hard material is used, which is resistant to falling and smashing, not easy to deform, and has a strong load-bearing capacity5. Shockproof inner support, precise mold opening, tight storage and protection of your equipment6. Comfortable soft rubber handle, comfortable hand feeling, non-slip and wear-resistant, relieve hand pressure7. Double insurance safety lock, wear-resistant and durable, bold and thick, durable8. The gas balance valve balances the air pressure inside and outside the body, avoiding the phenomenon of failure to open or collapse caused by high altitude or temperature9. High-density elastic egg cotton, soft and fit shock-absorbing protection, effectively protect the machine and accessories10. 304 stainless steel chain, high strength, corrosion resistance, wear resistance11. Box reinforcement ribs increase the strength of the box, making it more compressive and wear-resistant, so that the box can be placed stably12. Applicable models: suitable for DJI RS3 Mini13. Note: The product only includes the storage bag, nothing else14. Material: ABS+EVA15. Size: 35.4 x 29.4 x 13.7cm16. Net weight: 1.5kg17. Gross weight: 1.75kg

Read more less

1. For Mini 3 / Mini 3 Pro / Mini 2 SE / Mini 2 / Mini SE / Mavic Mini2. Tailor-made, stable support, fits the bottom structure of Mini series drones, it is stable and not easy to fall off when placed lightly3. Intuitive display angle, better display of aircraft shape, can be expanded or folded for display4. Low center of gravity and stable support, no shaking or tipping5. Note: The product only includes the bracket, nothing else6. Material: plastic7. Net weight: 27g8. Gross weight: 36g

Read more less

Features1. Unlock the POV angle of view: The first-person perspective neck neck shooting has a stronger sense of substitution than handheld shooting, and it is close to the eyes, bringing you more shocking visual effects. 2. Built-in 8 high-strength magnets, strong adsorption, sports photography is not afraid of bumps. 3. Small displacement is automatically corrected, and the adsorption is not misplaced to maintain the positive direction. 4. "Invisible" magnetic design: Invisible wearing under clothing, docile fit without shaking, quick magnetic disassembly. 5. Unlimited viewing angle: Easily switch between horizontal and vertical screens; you can also flip the camera up and down to adjust the shooting angle arbitrarily. 6. Wide range of applications: can be used in a variety of sports cameras, such as for GoPro series, Osmo Action series, Insta360 series, Feimi FIMI series...Specifications1. Model: ZJ554 2. Material: Magnet, plastic, lanyard 3. Net weight: 73g

Read more less

Features1. High-toughness material, which can effectively cushion the impact force. 2. Multi-arch structure, anti-collision and impact resistance, anti-collision upgrade is safer. 3. Connected end to end, stable and anti-shake. The front and rear rings are connected and integrated to reduce resonance and make it more stable. 4. Isolate the blades, protect the propellers, and prevent the propellers from scratching people or objects to a large extent. 5. It can be used with Sunnylife LG551 spider tripod.Specifications1. Model: MM3-KC559 2. Applicable models: Suitable for DJI Mini 3 3. Material: Plastic 4. Net weight: 47g

Read more less

1. Carbon fiber material, light weight, high hardness, high aerodynamic efficiency;2. The blades have passed the dynamic balance test, with low power consumption and strong battery life;3. Precise mold opening, easy alignment of screw holes, and easy installation.4. Applicable models: suitable for DJI Mini 3 (not applicable for Mini 3 Pro)5. Main material: carbon fiber6. Net weight: 15.3g7. Size: 7.6 x 1.7cmPacking list:Propellers (pair) x 2Screw × 10Screwdriver × 1

Read more less