Outdoor & Sports
MANNER Outdoor Multifunctional Fishing Life Vest Swimming Life Jacket (Army Green)
1.Crafted with a premium nylon fabric and replaceable EPE pearl cotton inside for superior buoyancy. 2.Four generous chest pocket, four zipped front pockets, two side mesh pocket, and one generous back pocket in total. 3.Mesh on the back and mesh fabric inside deliver high breathability. 4.Open sides leave you with more room to paddle or cast fishing float. 5.Great for fly fishing, kayak fishing, offshore angling, rock fishing or any other type of fishing. 6.For the crowd about 50 to 90kg.
823,14 Kč
4mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
154,40 Kč
5mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
159,00 Kč
6mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
159,00 Kč
7mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
159,00 Kč
8mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
164,63 Kč
9mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
175,11 Kč
10mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
187,63 Kč
11mm HENGJIA SS010 50pcs /Pack Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
204,25 Kč
12mm HENGJIA SS010 50 in 1 Stainless Steel Flat Ring Fishing Space Fittings
1. Material: stainless steel2. Purpose: small fishing accessories3. Specification: about 4/5/6/7/8/9/10/11/12mm4. The split ring is made of stainless steel to avoid rust5. Fine chemical polishing can smooth the angle to prevent damage to the line6. Good tensile force and high strength
205,02 Kč
2 PCS Plastic Nylon Single Rod Holder Single Tube Rod Holder Marine Yacht Rod Barrel(Black)
1. Material: nylon2. Uses: yachts, ships, fishing boxes and rod holders3. High-strength nylon material, made with precision workmanship, corrosion resistance, oxidation resistance, sturdiness and durability4. Use countersunk bolts to fix, the bolt head will not protrude after installation, and will not scratch the fishing rod5. Weight: about 95g/piece6. Size: about 27.1x4.6 cm/piece
182,52 Kč
2 PCS Plastic Nylon Single Rod Holder Single Tube Rod Holder Marine Yacht Rod Barrel(White)
1. Material: nylon2. Uses: yachts, ships, fishing boxes and rod holders3. High-strength nylon material, made with precision workmanship, corrosion resistance, oxidation resistance, sturdiness and durability4. Use countersunk bolts to fix, the bolt head will not protrude after installation, and will not scratch the fishing rod5. Weight: about 95g/piece6. Size: about 27.1x4.6 cm/piece
182,52 Kč
Dip Net Anti-Rotation Joint Connector Dip Net Rod Quick Joint(Black)
1. Material: aluminum-magnesium alloy2. Purpose: to avoid the rotation of the net head3. No screws, no fear of turning over, the connectors are installed separately and fixed with glue4. The principle of air pump quick connection, six steel balls are firmly locked to prevent rotation5. 8mm universal interface, suitable for most dip net poles, integrally formed, sturdy and durable6. Brass material, strong, anti-shake, strong and durable7. Quick disassembly and assembly of anti-rotation interface, simple and convenient operation, easy fishing8. Size: about 5x1.8 cm/piece9. Weight: about 31.7g/piece
177,15 Kč
Dip Net Anti-Rotation Joint Connector Dip Net Rod Quick Joint(Red)
1. Material: aluminum-magnesium alloy2. Purpose: to avoid the rotation of the net head3. No screws, no fear of turning over, the connectors are installed separately and fixed with glue4. The principle of air pump quick connection, six steel balls are firmly locked to prevent rotation5. 8mm universal interface, suitable for most dip net poles, integrally formed, sturdy and durable6. Brass material, strong, anti-shake, strong and durable7. Quick disassembly and assembly of anti-rotation interface, simple and convenient operation, easy fishing8. Size: about 5x1.8 cm/piece9. Weight: about 31.7g/piece
177,15 Kč
Dip Net Anti-Rotation Joint Connector Dip Net Rod Quick Joint(Brown)
1. Material: aluminum-magnesium alloy2. Purpose: to avoid the rotation of the net head3. No screws, no fear of turning over, the connectors are installed separately and fixed with glue4. The principle of air pump quick connection, six steel balls are firmly locked to prevent rotation5. 8mm universal interface, suitable for most dip net poles, integrally formed, sturdy and durable6. Brass material, strong, anti-shake, strong and durable7. Quick disassembly and assembly of anti-rotation interface, simple and convenient operation, easy fishing8. Size: about 5x1.8 cm/piece9. Weight: about 31.7g/piece
177,15 Kč
Dip Net Anti-Rotation Joint Connector Dip Net Rod Quick Joint(Blue)
1. Material: aluminum-magnesium alloy2. Purpose: to avoid the rotation of the net head3. No screws, no fear of turning over, the connectors are installed separately and fixed with glue4. The principle of air pump quick connection, six steel balls are firmly locked to prevent rotation5. 8mm universal interface, suitable for most dip net poles, integrally formed, sturdy and durable6. Brass material, strong, anti-shake, strong and durable7. Quick disassembly and assembly of anti-rotation interface, simple and convenient operation, easy fishing8. Size: about 5x1.8 cm/piece9. Weight: about 31.7g/piece
177,15 Kč
LED Fishing Light Underwater Luminous Lure Lamp, AC/DC 12-24V (Warm White)
1. Working voltage: AC/DC 12-24V2. Light Type: SMD LED3. Light tube size: about 9.9x2.2cm4. Features: waterproof, high power5. Function: lure fish underwater 6. Gross weight: 216g
352,26 Kč
Breathable Oxford Cloth Fishing Vest(Black Gray)
1. Easy to breathe, wear-resistant and dirt-resistant2. Material: 600D Oxford cloth3. Packing: regular PP bag packing4. Folded size: 24 x 21 x 3cm5. Weight: about 360g
498,74 Kč
VXM Direct Loading Disc GXP Straight-fit One-piece Positive and Negative Teeth XX1 X0 X9 30T38T Single Disc Platter(Black)
Brand Name:VXMCrank Length:170mmUse:Mountain BikesChainwheel Teeth:30T 32T 34T 36T 38TSpecification:1.Color: Black Red2.Weight:300g3.Performance advantage: wear-resisting, surface hardness enhancement, anti-viscosity, anti-chip4.Appearance advantage: gorgeous color, reflective super dazzle, metal texture, dazzling eyes5.Material: 7075-T651 aluminum alloy
535,04 Kč
VXM Direct Loading Disc GXP Straight-fit One-piece Positive and Negative Teeth XX1 X0 X9 30T38T Single Disc Platter(Red)
Brand Name:VXMCrank Length:170mmUse:Mountain BikesChainwheel Teeth:30T 32T 34T 36T 38TSpecification:1.Color: Black Red2.Weight:300g3.Performance advantage: wear-resisting, surface hardness enhancement, anti-viscosity, anti-chip4.Appearance advantage: gorgeous color, reflective super dazzle, metal texture, dazzling eyes5.Material: 7075-T651 aluminum alloy
535,04 Kč
VXM Direct Loading Disc GXP Straight-fit One-piece Positive and Negative Teeth XX1 X0 X9 30T38T Single Disc Platter(Black)
Brand Name:VXMCrank Length:170mmUse:Mountain BikesChainwheel Teeth:30T 32T 34T 36T 38TSpecification:1.Color: Black Red2.Weight:300g3.Performance advantage: wear-resisting, surface hardness enhancement, anti-viscosity, anti-chip4.Appearance advantage: gorgeous color, reflective super dazzle, metal texture, dazzling eyes5.Material: 7075-T651 aluminum alloy
535,04 Kč
ZTTO Bicycle Handlebar Fork Stem Lightweight Stand Pipe 32mm
1. Material: 3D Forged AL6061 Aluminium Alloy, T6 Heat Treated 2. Length: 32mm 3. Handlebar: 31.8 4. Rise: +-7 degree 5. It is easy to install and remove
306,76 Kč
ZTTO Bicycle Handlebar Fork Stem Lightweight Stand Pipe 60mm
1. Material: 3D Forged AL6061 Aluminium Alloy, T6 Heat Treated 2. Length: 60mm 3. Handlebar: 31.8 4. Rise: +-7 degree 5. It is easy to install and remove
306,76 Kč
ZTTO Bicycle Handlebar Fork Stem Lightweight Stand Pipe 80mm
1. Material: 3D Forged AL6061 Aluminium Alloy, T6 Heat Treated 2. Length: 80mm 3. Handlebar: 31.8 4. Rise: +-7 degree 5. It is easy to install and remove
306,76 Kč
ZTTO Bicycle Handlebar Fork Stem Lightweight Stand Pipe 90mm
1. Material: 3D Forged AL6061 Aluminium Alloy, T6 Heat Treated 2. Length: 90mm 3. Handlebar: 31.8 4. Rise: +-7 degree 5. It is easy to install and remove
306,76 Kč
ZTTO Bicycle Handlebar Fork Stem Lightweight Stand Pipe 100mm
1. Material: 3D Forged AL6061 Aluminium Alloy, T6 Heat Treated 2. Length: 100mm 3. Handlebar: 31.8 4. Rise: +-7 degree 5. It is easy to install and remove
316,98 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 16mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 16mm.
195,81 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 18mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 18mm.
195,81 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 21mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 21mm.
210,64 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 23mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 23mm.
211,92 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 25mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 25mm.
211,92 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 27mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 27mm.
211,92 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 29mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 29mm.
211,92 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 31mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 31mm.
224,45 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 33mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 33mm.
224,45 Kč
ZTTO 10M Bicycle Tire Liner Puncture Proof Belt Protection Pad 35mm
1. Used to seal the inner hole of the rim and maintain the airtightness of the tire under high pressure. 2. It is recommended to wrap around two turns per wheel. 3. Length: 10m. 4. Placed between the inner and outer tires, it is ultra-light and does not increase the load in the ride. It makes it easier for you to race or travel. 5. The tape has strong fit, is not easy to walk on average, is not easy to loose, and is easy to install and practical. 6. It is firmly bonded, it is resistant to breakage, it is not easy to be deformed and aging, it is not easy to fall off for a long time, it is safe and reliable. 7. Width: 35mm.
224,45 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:125mm, Style:RE Single Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.283,05 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:150mm, Style:RE Single Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.252,63 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:165mm, Style:RE Single Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.281,26 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:190mm, Style:RE Single Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.314,75 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:125mm, Style:RR1 Dual Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.632,25 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:150mm, Style:RR1 Dual Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.632,25 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:165mm, Style:RR1 Dual Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.632,25 Kč
KindShock A5 Air Pressure Rear Shock Absorber Mountain Bike Shock Absorber Folding Bike Rear Liner, Size:190mm, Style:RR1 Dual Gas
Parameter:1. Weight of single chamber/double chamber: 125mm 170g/173g, 150mm 184g/184g, 165mm 190g/192g, 190mm 202g/205g2. Eye-to-eye distance: 125mm/150mm/165mm/190mm3. Installation width: 24 mm4. Screw hole diameter: 8mm5. Application: The frame beams suitable for 125mm shock absorbers are generally round, and the frame beams suitable for 150mm shock absorbers are generally angular square tubes. 165mm/190mm is often used in mountainous areas corresponding to the length of the shock absorber. Car soft tail frame (subject to the length of the original shock absorber that can be measured)Features:1. The internal structure is simple and precise2. Unique shape, beautiful and practical3. Wide application4. Gas as the main shock absorber provides good sliding properties5. By adjusting the air pressure of the negative air chamber to adjust the fisheye bearing design to solve the tolerance and deviation of the car body itself6. Easy to install and use
2.360,00 Kč
DNM AOY36RC Mountain Bike Shock Absorber Soft Tail Bike Rear Shock Absorber, Size:165x35mm(With 24 mm Bushing)
1. Weight: 165mm 279g, 190mm 302g, 200mm 307g2. Dimensions: 165x35mm, 190x50mm, 200x55mm3. Material: aluminum alloy4. Air nozzle angle: 30 degrees5. Main body: 6061 hard film treatment6. Spindle core: hard chrome treatment7. Application: XC/Trail8. Four adjustment functions: adjustable damping / compression lock / gas pressure can be filled and adjusted / stroke can be adjusted9. Features: hard film processing precision processing, smooth movement, safe and stable, easy to install, durable
4.510,63 Kč
DNM AOY36RC Mountain Bike Shock Absorber Soft Tail Bike Rear Shock Absorber, Size:200x55mm(With 24 mm Bushing)
1. Weight: 165mm 279g, 190mm 302g, 200mm 307g2. Dimensions: 165x35mm, 190x50mm, 200x55mm3. Material: aluminum alloy4. Air nozzle angle: 30 degrees5. Main body: 6061 hard film treatment6. Spindle core: hard chrome treatment7. Application: XC/Trail8. Four adjustment functions: adjustable damping / compression lock / gas pressure can be filled and adjusted / stroke can be adjusted9. Features: hard film processing precision processing, smooth movement, safe and stable, easy to install, durable
4.510,63 Kč
DNM AOY36RC Mountain Bike Shock Absorber Soft Tail Bike Rear Shock Absorber, Size:190x50mm(With 24 mm Bushing)
1. Weight: 165mm 279g, 190mm 302g, 200mm 307g2. Dimensions: 165x35mm, 190x50mm, 200x55mm3. Material: aluminum alloy4. Air nozzle angle: 30 degrees5. Main body: 6061 hard film treatment6. Spindle core: hard chrome treatment7. Application: XC/Trail8. Four adjustment functions: adjustable damping / compression lock / gas pressure can be filled and adjusted / stroke can be adjusted9. Features: hard film processing precision processing, smooth movement, safe and stable, easy to install, durable
4.510,63 Kč
DNM RCP2S Mountain Bike Oil Spring Rear Shock Absorber Soft Tail Frame Rear Bladder, Size:190mm(With 24mm Bushing)
1. Weight: 190mm 793g, 200mm 922g, 210mm 929g, 220mm 944g, 240mm 1056g2. Dimensions: 190mm, 200mm, 210mm, 220mm, 240mm3. Main body: 33 mm4. Spindle center: 12 mm5. Weight: 550 pounds6. Material: aluminum alloy7. Application: for AM/FR/DH8. Function: rebound fine adjustment/compression fine adjustment/spring preload adjustable/air chamber soft and hard adjustable9. Features: beautiful and practical, easy to operate, safe and stable, simple to install, exquisite workmanship, excellent functions, durable
5.094,50 Kč