Black Friday Week at Garmade ENDS SOON!

Save up to 25%! Don't miss out—check it out now!

Dec 03, 2024 11:59:59

  • For orders below 150€a 5% discount will be automatically applied.
  • For orders between 150€ and 250€a 10% discount will be automatically applied.
  • For orders between 250€ and 500€, a 15% discount will be automatically applied.
  • For orders between 500€ and 1000€, a 20% discount will be automatically applied.
  • For orders of above 1000€, a 25% discount will be automatically applied.

Bicycle Maintenance Tool Set Tool + 20 Teeth + 35 Grams

Description


Three-in-one combination tool:
1. Environmentally friendly plastic, good slip resistance
2. One-piece milling pin forming, high strength
3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel
4. Material: carbon steel + surface chrome plating
5. Size: length 20cm
6. Weight: about 200g

Pull code tool:
1. The ejector rod has an extended and removable square mouth
2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank
3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis
4. Anti-slip embossing, easy to screw by hand, easy to adjust
5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip
6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured
7. Material: high strength steel
8. Size: length 8cm, diameter 1.9cm
9. Weight: about 120g

Silver chain clipper:
1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation
2. Effectively avoid ejection, the ejector needles make concentric and concentric movements
3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency
4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged
5. Using automatic thread rolling machine, high precision push thread, accurate push
6. Material: high strength steel
7. Size: 8.2x7x1.1cm
8. Weight: about 120g

Spoke wrench
1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market
2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust
3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples
4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple
5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand
6. Material: high strength steel
7. Size: 3.8x3.8x1.7cm
8. Weight: about 46g

Universal tool for flywheel:
1. With the use of a chain wrench, the flywheel can be easily removed
2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled
3. Material: carbon steel
4. Size: height 2.6cm, diameter 2.5cm
5. Weight: about 33g

Bottom axle removal sleeve:
1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway
2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force
3. 20 sturdy teeth, which can fit and exert force at the same time
4. Satisfy the daily vehicle disassembly, maintenance and durability of riders
5. Material: high strength steel
6. Size: 3.2x3.25cm
7. Weight: about 108g

Tire lever:
1. Material: high strength steel + plastic handle
2. Size: length 15cm
3. Weight: about 120g

Freewheel chain wrench:
1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain
2. Material: high strength
3. Size: length 30cm
7. Weight: about 260g

Chain clipper:
1. Material: high strength steel + plastic handle
2. Dimensions: 10.5 x 7 x 2cm
3. Weight: about 200g

Bicycle Maintenance Tool Set Tool + 20 Teeth + 35 Grams

Product form

SKU: TBD0602425101

  • In stock (Processing Time 1 - 72 hours)

230,90 Kč

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Three-in-one combination tool:
    1. Environmentally friendly plastic, good slip resistance
    2. One-piece milling pin forming, high strength
    3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel
    4. Material: carbon steel + surface chrome plating
    5. Size: length 20cm
    6. Weight: about 200g

    Pull code tool:
    1. The ejector rod has an extended and removable square mouth
    2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank
    3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis
    4. Anti-slip embossing, easy to screw by hand, easy to adjust
    5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip
    6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured
    7. Material: high strength steel
    8. Size: length 8cm, diameter 1.9cm
    9. Weight: about 120g

    Silver chain clipper:
    1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation
    2. Effectively avoid ejection, the ejector needles make concentric and concentric movements
    3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency
    4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged
    5. Using automatic thread rolling machine, high precision push thread, accurate push
    6. Material: high strength steel
    7. Size: 8.2x7x1.1cm
    8. Weight: about 120g

    Spoke wrench
    1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market
    2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust
    3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples
    4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple
    5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand
    6. Material: high strength steel
    7. Size: 3.8x3.8x1.7cm
    8. Weight: about 46g

    Universal tool for flywheel:
    1. With the use of a chain wrench, the flywheel can be easily removed
    2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled
    3. Material: carbon steel
    4. Size: height 2.6cm, diameter 2.5cm
    5. Weight: about 33g

    Bottom axle removal sleeve:
    1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway
    2. Anti-dropping design, easy to solve the problem that the cylinder can't be fixed and easy to fall off without exerting force
    3. 20 sturdy teeth, which can fit and exert force at the same time
    4. Satisfy the daily vehicle disassembly, maintenance and durability of riders
    5. Material: high strength steel
    6. Size: 3.2x3.25cm
    7. Weight: about 108g

    Tire lever:
    1. Material: high strength steel + plastic handle
    2. Size: length 15cm
    3. Weight: about 120g

    Freewheel chain wrench:
    1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain
    2. Material: high strength
    3. Size: length 30cm
    7. Weight: about 260g

    Chain clipper:
    1. Material: high strength steel + plastic handle
    2. Dimensions: 10.5 x 7 x 2cm
    3. Weight: about 200g

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account