Battery Accessories

1. High energy density, long life 2. Nominal voltage: 9V 3. Can be used in these products: cameras, toys and many other electronic devices 4. Size: 48.6 x 26.0 X 17.0mm

Read more less

1) No memory effect 2) Environmentally friendly 3) Battery Type: 18650 Rechargeable Battery 4) Voltage: 3.7v 5) Capacity: 3000mAh 6) Material: Li-ion Battery 7) Rechargeable times: Up to 1000 times 8) Compatible with: Battery appliances such as emergency lighting, portable devices, power tools 9) Size: 7cm x 2cm(Diameter)

Read more less

1. Model: USB2. Input voltage: DC5V3. Output voltage: DC7.3V/2V4. Applicable: home appliances, toys5. Output current: 250MA/1000MA6. Output power: 1W/5W7. Rated power: 10W8. Suitable for all kinds of SM-2P interface rechargeable batteries, support multiple charging methods9. Aluminum alloy USB interface, good conductivity10. High-quality wire is not easy to break11. Standard charging interface, firmly connected12. Note: to use this product, the battery must have a protective plate before it can be used

Read more less

1. Model: USB2. Input voltage: DC5V 0.5-2A3. Output voltage: 3.6-3.7V4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of JST positive interface rechargeable batteries, support multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. Standard charging interface, firmly connected10. Note: To use this product, the battery must have a protective plate before it can be used11. Line length: 60cm

Read more less

1. Two in one (18650 battery charger and smart mobile power) 2. Each slot has a separate charging circuit. 3. Reverse polarity protection. 4. When the input and output are simultaneously, it will automatically charge, first the device, then charge the battery. 5. Does not work, automatically shuts down after 20 seconds. Automatically turn on after charging, and automatically stop working after the output current is overcharged. 6. Press the backlight on/off for less than one second and turn the machine on/off for two seconds. 7. The maximum output current of the USB 1A output is limited to 1.5A, and the maximum output current of the USB 2A output is limited to 2.2A. 8. With dual output USB, both devices charge simultaneously. When outputting simultaneously, the total output current of the two USB ports is 2.2A. If the total output current is greater than 2.2A, the latest USB port will stop working.

Read more less

1. Model: USB2. Input parameters: 5.2V 0.5-2A3. Output parameters: 3.7x2 1000mA4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of SM-4P rechargeable batteries, supporting multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. SM-4P standard charging interface, firmly connectedLED light prompt function:- Connect the charging cable to the power supply light- The red light is always on when the lithium battery is charged- Red light to green light means the lithium battery is fully charged

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

1. Material: Plastic2. This battery box is equipped with 6 AA rechargeable batteries, which can be used on small led fill lights for Shenniu, Ruiying, Yongnuo, Nanguan, Aitushi, Fulaishi, and Muse, which are equivalent to NP- F550 / 750 / F970, the best choice for backup battery when the camera is out of power, universal for led photography light below 15W, Sony interface3. Applicable models: Suitable for DV-16 / DV-112 / DV-160V / DV-216V4. Note: Do not use for camera5. The battery installation order is from inside to outside, please install the battery strictly according to the diagram.6. The batteries are not included

Read more less

1. 8-slot independent charging, which can charge eight AAA, AA, or four C or D batteries at the same time or at will 2. Fully power off to protect the battery. 3. LCD displays charging status. 4. With USB cable, universal 5. Light weight and portable. Product parameters: 1. Input: DC 5V / 2A, 50 / 60Hz. 2. Output: DC 1.2V / 1800mA. 3. Weight: 199.5g.

Read more less

1. 8-slot independent charging, can charge eight AAA, AA batteries simultaneously or at will. 2. 100-240V voltage, universal worldwide. 3. 360-degree large area heat dissipation, reducing the load on the charger. 4. Intelligent chip, multiple protection, safer charging. 5. 38 copper core wires, corrosion-resistant, anti-oxidation, extend the life of the wires. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 2.4V 800mA. 3. Suitable for battery types: Ni-MH, Ni-Cd rechargeable batteries. 4. Size: 17.5x9x2.9cm. 5. Charging interface: external power supply. Packing list: Charger host x 1 Adapter x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. Automatically trickle charging to protect the battery. 6. Car-mounted and discharge function, continuous power when going out. 7. Flip cover design to prevent damage to charger equipment. Product parameters: 1. Input: AC 100-240V, 110W (maximum), DC 12V 800mA. 2. Output: 4.8V 1000mA, 9V 25mA (AA / AAA / C / D: 1000mA with one and four currents). 3. Size: 19.5x9x5cm.

Read more less

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as charging

Read more less

1) 100% Brand new and high quality 2) Suitable for SSC-P7/XML-T6 LED Headlight lamp 3) Battery capacity: 4400mAh 4) Voltage: 8.4V 5) Use time: 3-4 hours 6) Charging time: 3-4 hours 7) IP level: IP67 8) Size: 67 x 35 x 35mm 9) Weight: 230g

Read more less

1. Capacity: 8000mAh 2. Output voltage : 3.7V 4. Size: 67mm x 26mm 5. Weight: 94g

Read more less

1. Suitable for charging 18650 / 26650 / 14500 / 16340 / 18500 lithium batteries. 2. Each slot can be stretched to fit different size lithium batteries and can work independently. 3. The battery can be charged forward and reverse, overcharge protection, and accurate charge stop. 4. When charging, the display light is like a horse racing dynamic running light. 5. Input: AC 100-240V, 50/60Hz. 6. Output: DC 4.2V/2000mA. 7. Charging time: 2-5 hours. 8. Size: 13.5x6.5x3.5cm. 9. Cable length: 80cm (including plug length). 10. Note: Lithium batteries are not included.

Read more less

1. Input: DC 5V 2A2. Output: 1. 2V 550mAx83. Applicable battery: AA/AAA (not included)4. 8 independent control slots5. The charging speed of AA battery is 500mAh per hour, and the charging speed of AAA battery is 250mAh per hour, so it takes about 2 hours to fully charge 1000mAh AA battery6. Battery charger with micro USB and USB-C ports7. Broken and alkaline batteries do not work with this charger, it will automatically shut off when the charge is not rechargeable, short circuited or defective8. The LCD display clearly shows you the charging status of each battery9. Total weight: 130g10. Dimensions: 128x90x28mm

Read more less

1. Material: ABS, electronic components2. Applicable battery type: NiMH/NiCd3. Battery size: AA/AAA4. Charging current: 0.2-2.2A5. Discharge current: 0.1-1.0A6. Discharge cut-off voltage: 0.9V7. Support battery capacity: 500-3200mAh8. Capacity protection: 3200mAh9. Input voltage: DC 12V 2.0A10. Mode: fast charge, charge, discharge, activate, activate11. Interactive LED status feedback, each independent working channel has an independent LED light, which is convenient to observe the charging status12. AV black and white screen with animated highlights13. Dimensions: 11.21 x 10.8 x 6.2 cm14. Net weight: 370 grams15. Note: Shipping without battery!

Read more less

1. Material: ABS, electronic components2. Applicable battery type: NiMH/NiCd3. Battery size: AA/AAA4. Charging current: 0.2-2.2A5. Discharge current: 0.1-1.0A6. Discharge cut-off voltage: 0.9V7. Support battery capacity: 500-3200mAh8. Capacity protection: 3200mAh9. Input voltage: DC 12V 2.0A10. Mode: fast charge, charge, discharge, activate, activate11. Interactive LED status feedback, each independent working channel has an independent LED light, which is convenient to observe the charging status12. AV black and white screen with animated highlights13. Dimensions: 11.21 x 10.8 x 6.2 cm14. Net weight: 370 grams15. Note: Shipping without battery!

Read more less

1. Input: DC 5V 1-2A2. Output: 4.2V 1A3. Power supply mode: USB direct plug4. Compatible battery models: 10440, 14500, 16340, 16650, 14650, 18350, 18500, 186505. Size: about 12 x 9 x 3cm6. Weight: about 106g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Slot design, can charge a variety of batteries, fasten the card position to avoid poor contact, convenient and effective2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Smart chip technology, overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge protection6. 5V USB power supply, average speed current limiting design

Read more less

1. Retractable spring design, AAA/AA batteries can be recharged2. With a charging indicator, it will light up red when charging, and it will light up when fully charged3. USB interface, a variety of power supply methods, convenient and fast4. Rated power: 2-5W5. Input: DC 5V 1-2A6. Output: DC 1.2V 250mA7. Rechargeable battery: AAA/AA8. Charging time: about 3-5h9. Power interface: USB10. Dimensions: about 8.3 x 5 x 2.4 cm11. Weight: about 45 grams

Read more less

1. Retractable spring design, AAA/AA batteries can be recharged2. With a charging indicator, it will light up red when charging, and it will light up when fully charged3. USB interface, a variety of power supply methods, convenient and fast4. Rated power: 2-5W5. Input: DC 5V 1-2A6. Output: DC 1.2V 250mA7. Rechargeable battery: AAA/AA8. Charging time: about 3-5h9. Power interface: USB10. Dimensions: about 8.3 x 6.3 x 2.4 cm11. Weight: about 45 grams12. Description: only the charger, not the battery in the picture

Read more less

1. Input: DC 5V 1-2A2. Output: 4.2V 1A3. Power supply mode: USB direct plug4. Compatible battery models: 10440, 14500, 16340, 16650, 18350, 18500, 18650, 266505. Size: about 12.5 x 7 x 2.5cm6. Weight: about 94.6g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 3 slots are controlled independently, without affecting each other5. Smart chip technology, overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge protection6. 5V USB power supply, average speed current limiting design, multiple power supply methods7. Using industrial plastic, strong impact resistance8. When the battery is fully charged, the indicator light turns red to prevent overcharging

Read more less

1. Interface: Micro USB2. Input: DC 5V 1-2A3. Output: 1.2V 4.2/4.3mA4. Rechargeable battery: NI-MH/NI-CD AAA/AA5. Size: about 7.8 x 6.2 x 2.5cm6. Weight: about 39.2g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. USB interface, a variety of charging methods, convenient and fast6. Multiple protection of overcharge/short circuit/reverse polarity protection, safe to use

Read more less

1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Input: 220V6. Output: 1.2V 250mA7. Rechargeable battery: NI-MH/NI-CD AAA/AA8. Size: about 10.2 x 6.9 x 2.9cm9. Weight: about 120g10. Description: only the charger, excluding other items such as batteries in the picture

Read more less

1. Single-slot design, intelligent fast charging, self-stop when fully charged, durable2. With charging indicator, the red light is on when charging, and the green light is on when fully charged3. The contact piece is anti-corrosion and anti-oxidation4. Fireproof shell, fast heat dissipation, high temperature resistance, strong impact resistance5. Input: 110-240V6. Output: 3.7V 1A7. Rated power: 2-5W8. Weight: about 42.8g9. Size: about 10 x 3.2 x 3.9cm10. Description: only the charger, excluding other supplies such as batteries in the picture

Read more less

1. Single-slot design, intelligent fast charging, self-stop when fully charged, durable2. With charging indicator, the red light is on when charging, and the green light is on when fully charged3. The contact piece is anti-corrosion and anti-oxidation4. Fireproof shell, fast heat dissipation, high temperature resistance, strong impact resistance5. Input: 110-240V6. Output: 3.7V 1A7. Rated power: 2-5W8. Weight: about 42.8g9. Size: about 10 x 3.2 x 3.9cm10. Description: only the charger, excluding other supplies such as batteries in the picture

Read more less

1. Interface: USB2. Input: DC 5V 1-2A3. Output: DC 4.2V 1A4. Compatible battery models: 10440, 14500, 16340, 16650, 14650, 18350, 18500, 186505. Size: about 10.5 x 3.1 x 3.4cm6. Weight: about 35g7. Description: only the charger, not the battery in the pictureFeatures:1. Sliding blade design, compatible with various specifications of rechargeable batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. With charging protection function, it will not be overcharged5. USB interface, a variety of power supply methods, convenient and fast6. Overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge multiple protection, safe to use

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cm

Read more less

1. Model: USB2. Input parameters: 5.2V 0.5-2A3. Output parameters: 7.4V 1000mA4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of XH-3P interface rechargeable batteries, supporting multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. XH-3P standard charging interface, firmly connected10. Cable length: 56 cm (including plug)LED light prompt function:- Steady red light in no-load state- The charging status red light is always on, and the green light is flashing- Green light is always on when fully charged

Read more less

1. Model: USB2. Input voltage: DC5V 0.5-2A3. Output voltage: 3.6-3.7V4. Applicable: home appliances, toys5. Rated power: 10W6. Suitable for all kinds of rechargeable batteries with MX-2.0 interface, and supports multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. Standard charging interface, firmly connected10. Note: To use this product, the battery must have a protective plate before it can be used

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cm

Read more less

1. Input: 5V 1-2A. 2. Output: Lithium-ion battery: 1000mA, Ni-MH/Ni-Cd battery: 450mA. 3. Material: shell frosted ABS, contact point manganese steel. 4. Packing list: charger + data cable + manual + color box packaging. 5. USB design can be plugged into mobile phone chargers, mobile power computers and other USB ports for convenient and fast charging, not limited to ordinary socket charging. 6. Built-in intelligent protection circuit chip, effectively prevent overcharge, overvoltage, overcurrent and overheat, short circuit protection, both insulation, heat, pressure, wear and other characteristics, built-in battery reverse connection protection function, the corresponding battery frame after battery reverse connection Flashing prompt. 7. Built-in high-definition LCD display can display the charging process of the battery 8. The smart chip can automatically identify the corresponding charging mode for lithium ion/NiMH/NiCd battery selection.

Read more less

1. Size: 11.3*3.8*3.2cm 2. Weight: 60g 3. Input power supply: Micro USB DC 5V/1A 4. Output current: 500mA/1000mA 5. USB port output no-load voltage: 4.90-5.30V 6. The charger has a button to select charging current, which is easy to use. In any case, hold down the selection key and hold for 2 seconds 500 mA to convert 1000 mA charging current, press the selection key lightly to change the charging battery, and enter the charging state for 5 seconds when the charging battery is selected (example 3V 3.85V). 7. The charger is connected with 5V power supply. All the LED lights of the charger are on at once. If the battery is not put into the charging operation, the 500 mA (LED) display shows that the bad battery LED lamp flickers. 8. When the charger connects to the battery, it automatically identifies lithium 3.7V (Li-ion) and nickel-hydrogen 1.2V (Ni-MH).Ferric phosphate 3.0V (Liepo4) and lithium 3.85V (Li-ion) need to be selected manually. When the charging is selected, it will enter the charging state 5 seconds later. When the system is charged by default, the battery type can be inquired by pressing the select key and other functions can not be changed. 9. Compatible Batteries: Li-ion/IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR 123), 14500, 10440

Read more less