Engraving Machines
NEJE Air Assist Pump For Laser Cutting Engraving Machine(EU Plug)
Features:1.Cut Deeper Faster : Equipped with an air assist set on the laser engraver for wood and metal, large and stable air blows away smoke and debris generated during laser engraving machine working, helping engraver to cut faster and deeper, increasing laser efficiency, thus saving your time.2.Clean Surfce and Smooth edge : Air Assist Set uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces.3.Keep Low Noise Vibration : Air Assist Set has the advantages of low noise and vibration. The vibration generated by the air-assisted device, during the laser cutter working process will not affect the positioning of the laser head, ensuring continuous cutting of lines and complete patterns4.Protecte Laser Head : Air assist set has a stable air output system that blows away the acceptable debris and smoke generated during the laser head's work, protecting the laser head's lens from contamination and extending the laser head's service life.Compatible With NEJE Machine: Air Assist compatible with NEJE Laser Engraver and is easy to install.
€87,85
NEJE DK-8-KZ 1500mW USB DIY Laser Engraver Carving Machine
1. Support our professional English design software . 2. Engraving is 10 times faster. 3. Strong and cool design, high precision and stability, with 108 screws and alloy structure that make it strong. 4. Unique frame and weak light automatic positioning, Frame positioning makes the image positioning easier, Weak light even would not be difficult to engrave in toothpicks, Make engraving picture no excess residue, also more safe to prevent fire. 5. 490x490 high resolution print, soft material can print out the 3D and the gradient effect. 6. Lone time use, NEJE developed the professional power IC and radiator, Carving time will last much longer than other laser and more stable. 7. Truly 1500mW Blue and purple laser head, more higher speed, support more types of materials. 8. Material: acrylic + aluminum + stainless steel. 9. Laser power: 1500mw. 10. Laser wavelength: 405nm. 11. Laser operating temperature: 500 Degrees Celsius. 12. Support software: laser carver. 13. Image formats: JPG. 14. Image Size: 490x490pixels. 15. Image engraving pattern: Bitmap engraving. 16. Supply voltage: 4.2V-5.5V. 17. Supply Current: 1A. 18. Support Windows XP / 7 / 8 / 10. 19. Can be carved objects: mahogany, bamboo, paper cards, ivory, leather, flammable plastic, PCBA, rubber products and so on. 20. Can not engrave metal / aluminum / acrylic. 21. Uses: engraving, hand tools and industrial processing. 22. Work area: 38*38mm. 23. Product size: 19.8*14.5*16cm.
€115,00
NEJE 1500mW 405NM Blue + Purple Light Laser Module Accessory for DIY Laser Engraver Printer
1. Input voltage: 4.5-5V 2. Color: blue + purple light 3. Power: 1500mw 4. Laser wavelength: 405nm 5. Laser operating temperature: 500 Degrees Celsius 6. Product features: high power, fast speed, high precision 7. Can be carved items included: Hard wood, plastic, bamboo, rubber, leather, cut paper and so on. 8. Can not engrave metal / aluminum / acrylic and any retardant material 9. Length: 45mm 10. Diameter: 12mm 11. Weight: 17g
€37,53
NEJE 1000mW 405NM Blue + Purple Light Laser Module Accessory for DIY Laser Engraver Printer
1. Input voltage: 4.5-5V 2. Color: blue + purple light 3. Power: 1000mw 4. Laser wavelength: 405nm 5. Laser operating temperature: 500 Degrees Celsius 6. Product features: high power, fast speed, high precision 7. Can be carved items included: Hard wood, plastic, bamboo, rubber, leather, cut paper and so on. 8. Can not engrave metal / aluminum / acrylic and any retardant material 9. Length: 45mm 10. Diameter: 12mm 11. Weight: 17g
€34,16
NEJE KZ 3000mW Bluetooth DIY USB Laser Engraver Carving Machine
1. Material: Acrylic + Aluminum + Stainless Steel 2. Main Color: Black 3. Power: 3000mW 4. Laser Wave Length: 405nm 5. Image Format: jpg bmp 6. Image Size: 490 * 490 pixels / 0.075mm point distance 7. Image Engraving Pattern: Bitmap Engraving 8. Support System: Win7 / Win8 / XP / Win10 9. Supply Voltage: 5V 10. Supply Current: 500ma 11. Item Size: 16 * 14.5 * 19cm 12. Item Weight: 976g 13. Package Size: 30 * 21 * 23cm 14. Package Weight: 1800g
€139,21
XTOOL KA020132000 150 PCS Rectangular Wood Piece Engraving Machine Consumables with Hole
1. Made of natural poplar, smooth to the touch, no giant knots or rough spots, non-toxic and anti-allergic. 2. Unfinished blank poplar wood chips are ideal materials for laser cutting engraving, pigment coloring, etc. Use your imagination and creativity to make your special and unforgettable craft wood products, which you can then use twine to hang on walls, windows, trees, etc. 3. Rectangular woodwork can be used for artistic creations such as handmade DIY paintings, Christmas signs, gift tags, handwritten tags, lettering, wish cards, table numbers, hangers, coasters, photo props and many other art and craft projects. Suitable for home decoration, party decoration, festival and tourist attraction decoration. 4. Great for classroom use to help kids learn colors, letters, animals, etc. Perfect for art classes, wedding planning or home decor. Can also be used as a nice decoration for Christmas, baby shower, birthday, new year, etc. 5. Product size: 50 x 33 x 2mm.
€13,24
XTOOL D1 KA020167000 Air Assist Kit Engraving Machine Accessories, US Plug
1. The gas nozzle is made of metal material, which is resistant to high temperature. 2. The strong and stable air output of 30L/min can quickly blow away the smoke and stains produced by laser processing. 3. The running sound is small and the vibration is small. 4. Small size, can be placed on the desktop. 5. The installation is simple, and it can be quickly retrofitted and upgraded. 6. Power supply voltage: AC 110V/60Hz 7. Air flow: 30L/min 8. Rated power: 17W 9. Air pipe length: 2m
€147,11
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:AU Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.975,30
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:EU Plug(Golden Red)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:AU Plug(Metal Gray)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:US Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:UK Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:EU Plug(Metal Gray)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:US Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:UK Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.640,26
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:AU Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:AU Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.975,30
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:UK Plug(Metal Gray)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:EU Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:US Plug(Metal Gray)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:EU Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:AU Plug(Golden Red)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:US Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:EU Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:UK Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:UK Plug(Metal Gray)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.644,31
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:US Plug(Golden Red)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-10W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:UK Plug(Golden Red)
1. Machine power: 60W2. Laser power: 40W3. Laser module output power: 10W4. Laser spot: 0.08x0.06mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€981,05
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:EU Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine, Plug Type:AU Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.643,36
XTOOL D1 Pro-20W High Accuracy DIY Laser Engraving & Cutting Machine + Rotary Attachment + Raiser Kit, Plug Type:US Plug(Golden Red)
1. Machine power: 120W2. Laser power: 84W3. Laser module output power: 20W4. Laser spot: 0.08x0.1mm5. Maximum workpiece height: 50mm6. Connection interface: USB/wireless network/TF card7. Support system: Windows system/Apple system/Android/Apple8. Superfine compression points for finer details9. Up to 400mm/s working speed can increase your productivity10. 10mm basswood cuts in One-PASS by 20W highest power diode laser11. Higher precision and stability through durable mechanical structure12. Auto-Stop if detects flame or moving or tipping for extra safety
€1.969,00
NEJE MASTER 3 Laser Engraver with B30635 Laser Module
1. Fan speed: 10600rpm2. Single output power: 600mW3. Laser wavelength: 405nm4. Focus spot size: 0.02×0.02mm5. PWM input: 3-12V0-20KHZ6. Support system: Win 7/8/XP/10, Android APP (NEJE scanner).7. Please wear laser goggles to avoid direct contact of the laser with eyes and skin!8. Do not engrave mirror objects, pay attention to fire prevention, and pay attention to pets when working!9. Smoke will be produced when burning, please pay attention to indoor smoke exhaust.10. The warranty period of the laser module is one year. If you have any quality problems (except for individual cases, such as using the laser module for more than 30 minutes each time and causing damage), please feel free to ask us for help.11. If there is any problem with your laser module, please do not disassemble it without our permission. It will destroy the laser module.12. Package includes:• 1 x Master 2 Laser Engraver• 1 laser module• 4 nuts• 1 goggle• 1 x L-Wrench• 1 x USB cable• 1 x Small Wrench• 1 12V2A power adapter• 1 EU adapter• 1 small wooden block• 1 x test strip
€280,80
XTOOL D1 Air Assist Kit Engraving Machine Accessories, Plug:UK Plug
1. The gas nozzle is made of metal material, which is resistant to high temperature.2. The strong and stable air output of 30L/min can quickly blow away the smoke and stains produced by laser processing.3. The running sound is small and the vibration is small.4. Small size, can be placed on the desktop.5. The installation is simple, and it can be quickly retrofitted and upgraded.6. Power supply voltage: AC 110V/60Hz7. Air flow: 30L/min8. Rated power: 17W
€148,23
XTOOL D1 Air Assist Kit Engraving Machine Accessories, Plug:AU Plug
1. The gas nozzle is made of metal material, which is resistant to high temperature.2. The strong and stable air output of 30L/min can quickly blow away the smoke and stains produced by laser processing.3. The running sound is small and the vibration is small.4. Small size, can be placed on the desktop.5. The installation is simple, and it can be quickly retrofitted and upgraded.6. Power supply voltage: AC 110V/60Hz7. Air flow: 30L/min8. Rated power: 17W
€148,23
XTOOL D1 Air Assist Kit Engraving Machine Accessories, Plug:EU Plug
1. The gas nozzle is made of metal material, which is resistant to high temperature.2. The strong and stable air output of 30L/min can quickly blow away the smoke and stains produced by laser processing.3. The running sound is small and the vibration is small.4. Small size, can be placed on the desktop.5. The installation is simple, and it can be quickly retrofitted and upgraded.6. Power supply voltage: AC 110V/60Hz7. Air flow: 30L/min8. Rated power: 17W
€148,23
NEJE A40640 15W 450nm Laser Engraver Module Kits
1. Designed for Laser Engraver, 3D printer, CNC mill, Arduino project.2.15W Optical power output, 4mm plywood from 1 pass(speed 200), 3mm black acrylic board from 1 pass. Able to engrave stainless steel, but it needs good focus adjustment.3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable.4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature.5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module.6. Slidable mounting fixture is provided for easy adjustment of focus.Specification:1. Heatsink Material: Aircraft Aluminum + Brass Shell 2. Luminous Color: Blue 3. Section Size: 40mm x 40mm 4. Cooling Mode: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan 5. Dimension: 60 x 40 x 40mm 6. Adapter Plug: 5.5 2.1 port7. an Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum 8. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material Technical Parameters: 1. Module Input: 30-40W 2. Optical power output: 15W3. Wavelength: 445-450nm 4. Beam Shape: Dot (Focusable) 5. Working Voltage: DC 12V 6. TTL&PWM Modulation: YES, compatible with Both TTL & PWM Modulation 7. Input Voltage: DC12V 3-4A8. PWM/TTL Input: DC3.3V-12V 9. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-) 10. NOTE: Temperature interface can be disconnected11. Drive Mode: External ACC 12. Safe temperature range: <60 degrees Celsius13. Module weight: 202g ( The lighter the weight, the smaller the moving inertia, the better the performance ) 14. Life Time: 10000-20,000 hoursPackage Included- 1 x Laser Engraving Module- 1 x Laser Module Sliding fixture- 1 x 4 Pin Cable(1m)- 1 x NEJE Digital PWM Wave Pulse Signal Generator Adjustable board- 1 x 2.5mm L-shaped wrench- 1 x 5mm L-shaped wrench- 1 x 4Pin Cable- 1 x 3Pin Cable- 1 x 2Pin Cable
€366,84
NEJE A40630 7.5W 450nm Laser Engraver Module Kits
1.Designed for laser engraver, 3D printer, CNC mill, arduino project.2. 7.5W Optical power output, 4mm plywood from 1 pass(speed 100).3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable.4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature.5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module.6. The slidable mounting fixture is provided for easy adjustment of focus.7. 2 in 1 lens, adjustable focus and fixed focal length in one module.Specification1. Heatsink Material: Aircraft Aluminum + Brass Shell2. Luminous Color: Blue3. Section Size: 40mm x 40mm4. Cooling Mode: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan5. Dimension: 60 x 40 x 40mm6. Adapter Plug: 5.5 2.1 port7. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum8. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent MaterialTechnical Parameters1. Optical power output: 5.5W~7.5W2. Wavelength: 445-450nm3. Beam Shape: Dot (Focusable)4. Working Voltage: DC 12V5. TTL&PWM Modulation: YES, compatible with both TTL & PWM Modulation6. Input Voltage: DC12V 3A7. PWM/TTL Input: DC3.3V-12V8. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)9. Drive Mode: External ACC10. Safe temperature range: <60 degrees Celsius11. Module weight: 202g (The lighter the weight, the smaller the move inertia, the better the performance)12. Life Time: 10000-20,000 hoursPackage Included- 1 x Laser Engraving Module- 1 x Laser Module Sliding slot- 1 x 4 Pin Cable(32cm cable)- 1 x NEJE interface tranfer board- 1 x 2.5mm L-shaped wrench- 1 x 5mm L-shaped wrench- 1 x 3pin input cable
€184,91
NEJE MASTER 3 MAX Laser Engraver with E30130 Laser Module(US Plug)
1. Frame Size (L - W -H): 590x980x160mm2. Working Size ( X - Y): 460 x 810mm, area extended design3. Dot Pitch: 0.075mm4. Pixel: 6133 x 10800 px5. Frame Material: All-aluminum alloy and PC material hybrid frame6. Structure Technology:Y-axis fit adjustable design, X-axis stress fit assembly7. Structure Feature: Fit, High precision, stablize, smooth, no oil, easy 8. Motor Size: 42 x 42 x 40mm9. Motor Drive Current: 0.9A10. Module Height Adjuster:Yes11. Max Move Speed: X:1000mm/s(with A40640 module 204g) Y:750mm/s12. MCU:32-bit MCU13. Input:12V 5A14. Compatible Modules: All NEJE 12V 4pin Laser Moudle15. Radiator Size: 30 x 30 x 100 mm16. Speed of the Fan: 15000RPM(Double ball bearing)17. Interface: PH2.0 4Pin18. Drive Design: Built-in19. Input: 12V 2A +20. Optical Power:5W +21. Wavelength: 450nm22. Laser Class: Class 423. Number of Diodes: 124. Light Source: 1 X LD + Cylindrical Lens Compression Tech + C-Lens25. Focus Spot focus on 20mm: 0.13 x 0.13 mm26. PWM Input:VPP(3.3-12V), Recomend 1KHzFeatures:1. The standard area is 810*460, and the extended Y-axis track kit provided by NEJE can be extended to a larger area to meet the needs of large-area engraving and cutting.2. Only 6 screws can complete the basic installation, and the whole machine has passed the strict quality control procedures of NEJE to ensure the integrity of the quality.3. The high-precision CNC metal + CNC PC composite frame structure ensures the structural strength and the track fitting accuracy and smoothness.4. Adjustable mechanical calibration to ensure precise metal fit.5. Rich expansion accessories make the operation more professional, automatic and safe.6. Brand new NEJE E30130 intelligent high power module7. The E30130 module adopts the optical compression technology of the outer cylindrical lens to obtain a smaller and square fixed focal length spot, and is equipped with an inner cavity air assist to make the engraving and cutting easier.8. Internal thread high-efficiency heat dissipation design, effectively stabilizes power, and supports long-term use.9. The built-in MCU of the module adjusts the work of the module to obtain a quieter operating experience.10. Enhanced anti-static and anti-surge performance, more comprehensive protection of laser from environmental damage.11. The module provides 2 years free warranty.12. New 32-bit 200MHz processor+BLE+MEMS mobile control system, support NEJE Win software, NEJE Android APP, LseerGRBL, Lightburn. Support NEJE OTA software and firmware upgrades, providing users with more surprises and value.13. In NEJE mode, after transferring files to the device, you can unplug the USB cable and use it offline without occupying the computer or mobile phone.14. Optimized the GRBL firmware to better adapt the experience of diode lasers, and optimized the automatic control and interaction experience in laserGRBL and lightburn. For example, low light adjustment, air assist and smoke exhaust system automatic control.
€503,80
NEJE N25410 2.5W Laser Engraver Module Kits
1. High optical precision, 0.06mm focus point.2. 10W high power, 2.5W optical power output,3. Wide application, able to engrave black alumina, good at deep engraving4. Light weight, high-speed scanning without jitter.5. Intelligent, quiet, drive design, built-in control program can adjust the fan working status according to the TTL status and laser temperature.6. High heat dissipation performance, 20000 hours life.Packing List:- Laser module x 1- Screw installation kit (5 pcs) x 1- 30cm 4pin laser cable x 1- Interface adapter board x 1- 2pin TTL signal cable x 1- 3pin input signal cable x 1
€73,47
NEJE A30130 7.5W 450nm Laser Engraver Module Kits
1. Module size: 30x30x100mm2. Weight: 227g3. Speed of the fan: 15000RPM(double ball bearing)4. Interface: PH2.0 4 Pin5. Drive design: buit-in6. Input: 12V3A7. Optical power: 7.5W8. Wave length: 450nm9. Nmber of diodes: 110. Min focus spot size: 0.04x0.04mm11. Temperature sensing: YES12. Power adjustment method: PWM duty cvcle13. PWM Input: 3.3-12V.0-20KHz14. Max cutting carving deepth: 18mm15. Cutting speed(plywood 3mm, with airasist, clear edge): 120mm/min 100% power from 1 pass16. Packing list- 1 x laser module- 1 x sliding card slot- 1 x L wrench- 1 x L-shaped small wrench- 1 x Interface adapter board- 1 x 4pin laser line- 1 x 3pin 2.54 interface output cable- 1 x 2pin TTL control line
€171,88
NEJE E30130 5.5W 450nm Laser Engraver Module Kits
1. Cylindrical lens optical compression technology2. Fixed focus3. Thread enhanced heat dissipation process4. Intelligent drive, silent design5. Anti-surge and anti-static design6. Equipped with inner cavity air-assisted design, supporting 1.5MPa clean air pressure7. Double ball high-speed cooling fan design, super durable lifeSpecification1. Focus: 0.05x0.05mm2. Focus method: fixed ( about 10mm from the bottom )3. Optical power: CW 5.5W+, Pulse 7.5W4. Wavelength: 450nm5. Weight: 210g6. Module Size: 30x30x130 mm7. Input: DC 12V 3A8. Interface: 4Pin PH2.0 9. Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 3 Plus, NEJE 2s Max, NEJE 2s Plus, etc...10. Power Control: PWM Power Modulation11. Temperature control: 45 degrees CelsiusPackage Included1 x Laser Engraving Module1 x Sliding fixture1 x 4 Pin Cable(30cm)1 x 2pin yellow and black signal cable + 3pin input cable1 x NEJE Interface adapter board1 x 2.5mm L-shaped wrench1 x 5mm L-shaped wrench1 x Air Assist
€171,88
NEJE B30635 500MW 405nm Laser Engraver Module Kits
1. Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.2. Original laser diodes, good-quality, Ensure service life!3. Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hours 100% power aging test, Ensure long time working!4. Clear focus lens, not stray light, adjustable focal length.5. Can carving MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal).Specification1. Heatsink Material: Aircraft Aluminum + Brass Shell2. Laser diode: sharp 350MW 5.6mm laser diode (The maximum power 405nm 5.6mm laser diode)3. LD current: 350mA4. Luminous Color: Blue5. Section Size: 30mm x 30mm6. Cooling Mode: 20mm copper core + Heat Sink Groove+ Thermal silicone grease + 10000 rpm cooling fan7. Dimension: 60 x 30 x 30mm8. Adapter Output Voltage: DC 12V 2A9. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum10. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent MaterialTechnical Parameters: 1. Module Input: 3500MW2. Laser Output Power: 500MW3. Wavelength: 405nm4. Beam Shape: Dot (Focusable)5. Working Voltage: DC 12V6. TTL&PWM Modulation: YES, compatible with Both TTL & PWM Modulation7. Input Voltage: DC12V8. PWM/TTL Input: DC3.3V-12V 9. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL), 2Pin+2Pin (+,-) + (PWM/TTL,-)10. NOTE:Temperature interface can be disconnected11. Drive Mode: External ACC12. Safe temperature range: <70 degrees Celsius13. Module weight: 115g ( The lighter the weight, the smaller the moving inertia, the better the performance )14. Life Time: 20,000 hoursPackage Included:- 1 x Laser Engraving Module- 2 x Screw- 2 x ABS cushion post-1 x L-shaped wrench-1 x 4 Pin Cable(30cm Sports Cable) -1 x NEJE Digital PWM Wave Pulse Signal Generator Adjustable board
€105,58
NEJE MASTER 3 MAX Laser Engraver with A40640 Dual Laser Beam Module(US Plug)
1. Frame Size (L - W -H): 590x980x160mm2. Working Size ( X - Y): 460 x 810mm, area extended design3. Dot Pitch: 0. 075mm4. Pixel: 6133 x 10800 px5. Frame Material: All-aluminum alloy and PC material hybrid frame6. Structure: Y-axis fit adjustable design, X-axis stress fit assembly7. Structure Feature: Fit, High precision, stablize, smooth, no oil, easy maintenance, long life8. Motor Drive Current: 0.9A9. Max Move Speed: X:1000mm/s(with A40640 module 204g) Y:750mm/s10. MCU: 32-bit MCU11. Input: 12V 5A12. Compatible Modules: All NEJE 12V 4pin Laser Moudle13. You can safely and stably upgrade to the latest GRBL firmware through NEJE software, When using the device for the first time, please open the NEJE software to update to the latest firmware.14. NEJE optimizes the low-light experience in GRBL mode for diode lasers, and the low-light settings can be adjusted through the laserGRBL software.15. NEJE is compatible with M8, M7, Door functions, and automatically adapts to lightburn, laserGRBL and NEJE software for better automation of processes.16. The motor is automatically locked when power is turned on, and secondary processing can be performed when repeating the engraving work, so that the position information will not be lost.17. NEJE win software adds area customization settings, NEJE provides the function of expanding the orbits, both the Y-axis area and the X-axis area can be freely expanded, and the laser module also automatically engraves silently.18. NEJE 3 comes standard with a high-pressure air assist kit.19. NEJE 3 adopts all-metal frame + PC CNC structural parts, which improves the stability of the structure and enhances the smoothness of movement. It also adopts easy maintenance driving structure.20. NEJE 3 Max comes standard with M8 air valve kit for controlling air assist, M7 relay switch kit for controlling smoke exhaust system, and Door switch for emergency stop.21. NEJE 3 Max is equipped with a towline as standard to organize air pipes and wires for easy installation into a closed box.22. NEJE has greatly enhanced the anti-static and surge design under the new control system. NEJE has passed the very severe test in the experiment, which has greatly improved the reliability of the NEJE control system. The new system does not require additional grounding to protect equipment.23. The new laser uses a high temperature resistant window to protect the lens, which effectively improves the service life of the lens.Features:1. At the same time, it supports NEJE software, NEJE APP, LaserGRBL, Lightburn.2. Compared with NEJE 2s MAX, the operating experience is greatly optimized, the low-light display of laserGRBL and lightburn in GRBL mode is increased, and the low-light intensity can be adjusted through laserGRBL.3. The machine is powered on Afterwards, the motor will be automatically locked, so that the work can be operated twice after operation without repositioning; the interactive experience has been optimized, and the interactive communication with laserGRBL and lightburn software has been optimized.4. BLE-based wireless control, supports NEJE APP wireless control;5. Support NEJE 2S Max replacement of the mainboard. The device only adjusts the position of the YL and YR motor sockets.6. More abundant functions are: added M8, M7, Door functions, and all are compatible with NEJE software, laserGRBL, Lightburn, M8 generally achieve air-assisted Automatic control, so as to realize the dynamic control of each process of the work; M7 function is generally used to realize smoke control; Door function can only be stopped due to the problem of the message mechanism of the lightburn software, but can be suspended in NEJE mode or LaserGRBL mode , after canceling the door, you can continue to work without losing the work; NEJE provides M8, M7, Door function expansion accessories, including air valve switch and relay switch, you can use these accessories to realize the air compressor air circuit, smoke exhaust fan circuit , automatic control of the oxygen machine circuit.7. The new NEJE V6.1.2 software supports area expansion, you can simply modify the length of the track to achieve area expansion, NEJE also provides the option of extended track.8. Built-in sensor protection, currently in NEJE mode, when the machine angle changes, the device will automatically stop working.9. The top 32-bit processor has replaced the previous two The chip processing solution is more reliable, support OTA upgrade in NEJE mode, NEJE continuously upgrades software and firmware Provide more surprising and useful interesting features.
€691,75
NEJE MASTER 3 Plus Laser Engraver with A40640 Laser Module(US Plug)
1. It is just suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure.2. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation.3. The laser beam is composed of two high-power laser diodes, using FAC technology. The minimum focus point reaches 0.04x0.04mm (A40640 module). Support NEJE advanced laser module, built-in fast intelligent drive, timely temperature feedback, intelligently adjust fan cooling. Safe and quiet to use.4. Wood, MDF, leather, paper, cotton, etc. are all supported. 8mm plywood only needs one air-assisted cut (A40640), and the cut is very clean. It can directly engrave stainless steel, glass, transparent acrylic, etc.5. 32-bit control system, the fastest speed can reach 200,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS)6. You can take pictures with your mobile phone or choose pictures from the album.packing list• Laser engraver x1• A40640 Laser Module x1• 12V4A power supply x1• Manual x1• Goggles x1•Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, open-end wrench x1
€600,15
NEJE MASTER 3 Plus Laser Engraver with N40630 Laser Module(EU Plug)
1. Suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time.2. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure.3. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation.4. The newly designed N40630 module can cleanly cut 3mm thick plywood at one time, the minimum focus is 0.05x0.05mm, and the overlay can engrave metal. Built-in fast intelligent drive, timely temperature feedback, intelligent adjustment of fan cooling. Safe and quiet to use.5. Wood, MDF, leather, paper, cotton, etc. are all supported. The blade is very clean. The finish spray can engrave stainless steel, glass, clear acrylic, etc.6. 32-bit control system, the fastest speed can reach 200,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS)7. You can take pictures with your mobile phone or choose pictures from the album.Packing List:• Laser Engraver 1• Module 1• 1 12V3A power supply• Euro Adapter 1• Manual 1• red glasses 1•(Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, opening Wrench x1)
€324,90
NEJE MASTER 3 Plus Laser Engraver with N40630 Laser Module(US Plug)
1. Suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time.2. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure.3. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation.4. The newly designed N40630 module can cleanly cut 3mm thick plywood at one time, the minimum focus is 0.05x0.05mm, and the overlay can engrave metal. Built-in fast intelligent drive, timely temperature feedback, intelligent adjustment of fan cooling. Safe and quiet to use.5. Wood, MDF, leather, paper, cotton, etc. are all supported. The blade is very clean. The finish spray can engrave stainless steel, glass, clear acrylic, etc.6. 32-bit control system, the fastest speed can reach 200,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS)7. You can take pictures with your mobile phone or choose pictures from the album.Packing List:• Laser Engraver 1• Module 1• 1 12V3A power supply• Euro Adapter 1• Manual 1• red glasses 1•(Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, opening Wrench x1)
€324,90
NEJE MASTER 3 MAX Laser Engraver with E30130 Laser Module(EU Plug)
1. Frame Size (L - W -H): 590x980x160mm2. Working Size ( X - Y): 460 x 810mm, area extended design3. Dot Pitch: 0.075mm4. Pixel: 6133 x 10800 px5. Frame Material: All-aluminum alloy and PC material hybrid frame6. Structure Technology:Y-axis fit adjustable design, X-axis stress fit assembly7. Structure Feature: Fit, High precision, stablize, smooth, no oil, easy 8. Motor Size: 42 x 42 x 40mm9. Motor Drive Current: 0.9A10. Module Height Adjuster:Yes11. Max Move Speed: X:1000mm/s(with A40640 module 204g) Y:750mm/s12. MCU:32-bit MCU13. Input:12V 5A14. Compatible Modules: All NEJE 12V 4pin Laser Moudle15. Radiator Size: 30 x 30 x 100 mm16. Speed of the Fan: 15000RPM(Double ball bearing)17. Interface: PH2.0 4Pin18. Drive Design: Built-in19. Input: 12V 2A +20. Optical Power:5W +21. Wavelength: 450nm22. Laser Class: Class 423. Number of Diodes: 124. Light Source: 1 X LD + Cylindrical Lens Compression Tech + C-Lens25. Focus Spot focus on 20mm: 0.13 x 0.13 mm26. PWM Input:VPP(3.3-12V), Recomend 1KHzFeatures:1. The standard area is 810*460, and the extended Y-axis track kit provided by NEJE can be extended to a larger area to meet the needs of large-area engraving and cutting.2. Only 6 screws can complete the basic installation, and the whole machine has passed the strict quality control procedures of NEJE to ensure the integrity of the quality.3. The high-precision CNC metal + CNC PC composite frame structure ensures the structural strength and the track fitting accuracy and smoothness.4. Adjustable mechanical calibration to ensure precise metal fit.5. Rich expansion accessories make the operation more professional, automatic and safe.6. Brand new NEJE E30130 intelligent high power module7. The E30130 module adopts the optical compression technology of the outer cylindrical lens to obtain a smaller and square fixed focal length spot, and is equipped with an inner cavity air assist to make the engraving and cutting easier.8. Internal thread high-efficiency heat dissipation design, effectively stabilizes power, and supports long-term use.9. The built-in MCU of the module adjusts the work of the module to obtain a quieter operating experience.10. Enhanced anti-static and anti-surge performance, more comprehensive protection of laser from environmental damage.11. The module provides 2 years free warranty.12. New 32-bit 200MHz processor+BLE+MEMS mobile control system, support NEJE Win software, NEJE Android APP, LseerGRBL, Lightburn. Support NEJE OTA software and firmware upgrades, providing users with more surprises and value.13. In NEJE mode, after transferring files to the device, you can unplug the USB cable and use it offline without occupying the computer or mobile phone.14. Optimized the GRBL firmware to better adapt the experience of diode lasers, and optimized the automatic control and interaction experience in laserGRBL and lightburn. For example, low light adjustment, air assist and smoke exhaust system automatic control.
€503,80
NEJE MASTER 3 Laser Engraver with N30610 Laser Module(EU Plug)
1. Offline and APP wireless control. NEJE scanners transmit wirelessly. Cloud galleries and online Gcode make creation easier.2. Professional CNC software: Benbox, LaserGRBL. 170 x 170 mm engraving range. 3. Operating system: windows 7/10 / android / iOS / macOS.4. Image format: BMP/PNG/JPG/NC/DXF5. Greater power. Faster speed, more accurate precision, if you are a real maker, DIY handyman, CNC engineer or artist, this machine offers a great way6. Carve more material. Can engrave MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc. (not suitable for iron or other metals)Notice1. Please wear laser goggles to avoid direct contact with the eyes and skin of the laser!2. Do not engrave mirror objects, pay attention to fire prevention, and pay attention to pets when working!3. Smoke will be produced when burning, please pay attention to indoor smoke exhaust.4. The warranty period of the laser module is one year. If you have any quality problems (except for individual cases, such as using the laser module for more than 30 minutes each time and causing damage), please feel free to ask our customer service for help.5. If there is any problem with your laser module, please do not disassemble it without our permission. It will destroy the laser module.6. If you have any quality problems with the machine, please feel free to contact us. Many operational issues can be resolved based on your video and problem description. Thank you in advance.Package Included• 1 x Master 2 Laser Engraver• 1 laser module• 4 nuts• 1 goggle• 1 x L-Wrench• 1 x USB cable• 1 x Small Wrench• 1 12V2A power adapter• 1 EU adapter• 1 small wooden block• 1 x test strip
€257,27