Phone Car Kits

1. Strong magnetic force, super stable hold2. Soft silicone surface, safeguard your phone, would not interfere with signal3. Flexible base, fits snugly on the dash, firm & stable4. Small size, would not block air vent or driver view5. Easy to install, one-handed operation, 360 degrees free rotation6. Material: Zinc alloy+ABS+silicone+magnet7. Output power: 15W max8. Applicable scenario: car air outlet9. Size: 6.35x6.35x9cm10. Weight: 70g

Read more less

1. 320 degree free flip and adjust the viewing angle as you like.2. Adjustable base size, suitable for cup holders of various vehicle models3. Thickened silicone pad to prevent damage to the car and phone4. Open the clamping arm with one click, making it easy to access and place the phone5. Material: ABS+silicone6. Clamp mouth: 4-6.7 inches, 5.5-9cm7. Weight: 211g

Read more less

1. Material: Metal+ABS+Silicone2. Weight: 54g3. Installation method: paste type (magnetic suction type)4. Usage scenario: center console5. Easy to install, support flat and curved surface pasting6. One-handed pick and place, fully automatic operation, one-handed locking, convenient and quick7. Built-in universal ball rotating connection, free to rotate at multiple angles, and adjust the viewing angle at will8. Using strong non-marking glue, it is firmly pasted and not easy to fall off, and no trace is left when disassembling and assembling9. Anti-winding design, there is a data cable clip on the back of the bracket, and the storage is neat and convenient10. Applicable mobile phone range: 4-7 inch mobile phone

Read more less

1. Material: ABS+PC+Silicone2. Weight: 102g3. Application scenarios: rearview mirror / instrument panel / sun visor4. The horizontal angle can be rotated 180 degrees, which is convenient for storage when not in use5. Thickened non-slip pads to better protect the dashboard and your phone6. Support horizontal and vertical screen angle adjustment switching7. 360-degree rotation, free to adjust to your comfortable angle8. Strong spring, buckle base, stable and not shaking when encountering bumps9. Applicable equipment: suitable for mobile phones with a width of 5.7-10cm

Read more less

1. The mobile phone holder and the number card are combined into one, saving space in the car2. The heightened clamp arm design is not only beautiful, but also can easily clamp the folding screen3. Universal ball head design, 360-degree full rotation, satisfying multi-angle viewing angles4. The four-point principle of mechanics, more focused on the tight gear structure, quiet and no abnormal noise, no distraction5. Do not cover the buttons, reserve the charging port6. Center console windshield, multi-directional use7. Automatic locking device, one-handed use without pressure8. Weight: 290 grams

Read more less

1. Material: ABS+Silicone2. Size: 150x130x65mm3. Press lightly to insert and lock the CD port, it is stable and not easy to fall4. 360-degree universal ball rotation setting, free to adjust the use angle5. Add a silicone pad to the CD interface, which is shock-absorbing and non-slip, and will not hurt your car and mobile phone6. Easy to pick and place with one button, easy to install, easy to operate, convenient and quick to use7. Applicable mobile phone range: suitable for 4.7-7.4 inch mobile phones8. Applicable scene: car CD port

Read more less

1. Auto clip design, easy to take with one hand, safe driving.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Anti-Scratch Protection: non-slip silicone craws of the holder.5. Specification:- Material: ABS+ anodized aluminum alloy + strong PU glue- Rotation: 360 angle- Clip: 4-6 inch mobile phone, 45-190mm

Read more less

1. Material: ABS+Silicone2. Weight: 200g3. Installation method: paste type4. Use scene: car center console / air outlet5. Corrugated base design, can be attached to flat or curved surface6. One-handed operation, easy to take and place, put it down to absorb and fix, convenient and quick7. Using four N50 rubidium magnets, strong magnetic adsorption without fear of bumps, stable and not easy to fall8. Support horizontal and vertical screen switching, and can be freely adjusted to your comfortable use angle by 360-degree rotation9. A data cable storage clip is added on the back of the bracket to prevent wire entanglement, which is practical and convenient10. Using strong non-marking glue, sticking and removing without leaving traces11. Applicable equipment: mobile phone/tablet

Read more less

1. With hole design for charging.2. Designed sponge and silicone gasket for protecting the mobile phone, multi protection.3. Compatible with mobile phones or tablets with a width or length of 115-195mm.4. Silicone layer to protect your device better, won not scratch.5. Adjustable folding arm can be used for different kinds of headrest, size 130-178mm.6. 360 degrees rotating adjust the holder to fit your need.7. Material: ABS+silicone+stainless steel spring

Read more less

1. Premium aluminum alloy and silicone mat material, durable to use.2. Strongly magnetic adsorption, not easy to fall off.3. Can be used in many positions, such as car, home, kitchen, bedside table, desk, etc..4. Mini size in shape, easily pick up.5. Material: PC + aviation aluminum + silicone + N50 magnet

Read more less

1. Strong adsorption, not easy for the phone to drop off.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Adjust the mount to your most desired, convenient and comfortable angle and lengthand position. You can swing or position magnetic mount arm to an angle of up to 220 degrees, adding more flexibility and versatility in its usage or purpose.5. Material: ABS+ aluminum alloy + PU glue + N50 magnet

Read more less

1. Duckbill clips design, more steady on air outlet when using. 2. Thickened silicone pad, stable and non-slip. 3. 5pcs N50 magnet, strong adsorption, holding firmly. 4. Closed magnetic field design, ensure strong magnet but no adverse effect to the mobile signal. 5. Material: aluminum alloy + silicone + ABS + magnet

Read more less

1. Strong magnet adsorption stable mobile phone holder, do not fall off.2. Can be used in many positions, such as car, home, kitchen, bedside table, desk.3. Premium aluminum alloy shell and silicone mat.4. Super mini body, 2.5cm, you can put it anywhere.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Strong magnet adsorption stable mobile phone holder, do not fall off.2. Can be used in many positions, such as car, home, kitchen, bedside table, desk.3. Premium aluminum alloy shell and silicone mat.4. Super mini body, 2.5cm, you can put it anywhere.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Compatible mobile phone size for 4 inch to 7.0 inch. Universal design that is compatible to all mobile phones. 2. The simple yet elegant and classy andbreakthrough designs havebeen so successful that Yesido keeps onsetting their quality way above the rest.3. Flexible and safe non-slip silicone surface protruding 0.3mm above the base will not cause scratches on the phone.4. Design that is suitable for a wide range of applications. Can be used at home, at the office and of course inside the vehicle.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Compatible mobile phone size for 4 inch to 7.0 inch. Universal design that is compatible to all mobile phones. 2. The simple yet elegant and classy andbreakthrough designs havebeen so successful that Yesido keeps onsetting their quality way above the rest.3. Flexible and safe non-slip silicone surface protruding 0.3mm above the base will not cause scratches on the phone.4. Design that is suitable for a wide range of applications. Can be used at home, at the office and of course inside the vehicle.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Strong adsorption, not easy for the phone to drop off.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Material: zinc alloy + N50 magnet + silicone + foam glue5. Rotation: 360 angle

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1. Material: ABS2. Thickened non-slip foot pads, not hurting the wind guide blades3. Do not pick out the air outlet, suitable for all models4. Universal 4.0-7.0 inch mobile phone5. Metal hook, adjustment knob, 360-degree ball head6. Adjust the width with one key, and press the key on the back to automatically expand7. Triangular stable model, stable and not falling8. 360-degree ball head, adjust the angle according to driving habits9. Using intelligent clamping system, driving without fear of bumps

Read more less

1. Material: ABS + Alloy2. Frosted back panel technology, more fit3. Optimized structure, no abnormal noise from bumps4. Bottom support to prevent falling, 360-degree rotation free adjustment5. The mobile phone lightly touches both sides of the base, and it will be automatically clamped6. It can be picked and placed with one hand, making driving safer7. Double weight structure, can not shake wildly8. Alloy hook design, stronger support9. Does not block the mobile phone signal, easy to use10. Reserve the volume power button and charging port, do not block the line of sight and do not affect the use11. Compatible with 4.7-7 inch mobile phones12. High damping silicone design, anti-slip, anti-shake and shock-absorbing buffer

Read more less

1. Material: ABS + Alloy2. Frosted back panel technology, more fit3. Optimized structure, no abnormal noise from bumps4. Bottom support to prevent falling, 360-degree rotation free adjustment5. The mobile phone lightly touches both sides of the base, and it will be automatically clamped6. It can be picked and placed with one hand, making driving safer7. Double weight structure, can not shake wildly8. Alloy hook design, stronger support9. Does not block the mobile phone signal, easy to use10. Reserve the volume power button and charging port, do not block the line of sight and do not affect the use11. Compatible with 4.7-7 inch mobile phones12. High damping silicone design, anti-slip, anti-shake and shock-absorbing buffer

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1. Material: ABS + Alloy2. Frosted back panel technology, more fit3. Optimized structure, no abnormal noise from bumps4. Bottom support to prevent falling, 360-degree rotation free adjustment5. The mobile phone lightly touches both sides of the base, and it will be automatically clamped6. It can be picked and placed with one hand, making driving safer7. Double weight structure, can not shake wildly8. Alloy hook design, stronger support9. Does not block the mobile phone signal, easy to use10. Reserve the volume power button and charging port, do not block the line of sight and do not affect the use11. Compatible with 4.7-7 inch mobile phones12. High damping silicone design, anti-slip, anti-shake and shock-absorbing buffer

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less

1.Smart Infrared Sensor Design: Automatic opening and clamping design for one-handed operation, making everything easier and safer. Simply place the phone inside the holder and the clip will close and provide a firm and stable hold. Touch the quick-release button on either side and the holder will rotate to level the screen. When your phone is fully charged, the wireless car charger will automatically power off and last the life of your phones battery2.Qi Wireless Charger and Phone Holder: The 2-in-1 design combines the Qi wireless charger and the car phone holder in one device. The wireless car charger provides fast charging for your phone and keeps you free from cables and phone cases while driving.3.Strong Suction Cups and Adjustable Viewing Angle: You can install the wireless car charger holder multiple times, and it can be securely mounted on windshields, dashboards, and tables with strong suction cups. Full 360-degree rotation allows for optimal viewing angles and easier use of features, which is the safest way to access cell phone systems like GPS and phone4. Faster Charging: No need to remove the case when charging (most cases on the market, except for rough, uneven ones.). The car mount can hold all phones with 60-80mm width tightly, which is good for all QI-supported phones5.Product features: Over-current / over-temperature protection, CE / FCC / ROHS certification, Appearance patent certification, Touch sensor6. Built-in lithium battery: 200 mah

Read more less

1.Input voltage of magnetic head: DC 5V/2A2.Input voltage/current: 5V/2A,9V/1.67A,12V/1.5A3.After the equipment is powered on with DC5V-12V power supplyand DC5V-12V power supply, the equipment will automaticallyclamp the telescopic arm once, and the blue indicator lightwill turn on and turn red, and the indicator light will be on fora long time. At this time, the device enters the normal standbystate. When the front of the object is 5cm-20cm close tothe device, the device will automatically open its arms. Afterputting the mobile phone into the device, the device willautomatically clamp the mobile phone. At this time, thewireless charging will automatically charge the mobile phone.When charging, the blue indicator light (breathing light) ofthe device will be on. (mobile phone with wireless chargingfunction is required). When you need to take out the mobilephone, you need to touch the front sensing area of the device.and the device will automatically open its arms and take it away4.This device has over-voltage protection,over-temperatureprotection,magnetic field protection,short-circuit protectionif the device is abnormal,it will automatically stop working5.Some support wireless fast charging equipmentIPHONE:Iphone8/8P/X/XS/XSmax/11/11Pro/11PromaxHUAWEI:Mate RS/Mate20 Pro/Mate20 RS/P30 Pro/P40 ProSAMSUNG:S7/S7 edge/S8/S8+/S9+/S10XIAOMI:MIX2S/MIX3/NI9/106.Built-in lithium battery: 200mah

Read more less

1.1200 degree rotating design, with four movable joints, which can be flexibly adjusted to any angle to suit your driving.2.Universal mobile phone holder, compatible with mainstream mobile phones on the market, can be placed with one hand to ensure driving safety.3.Made of high-quality materials, using high-quality ABS+ alloy materials, giving the bracket a good texture.4.The gripper of the holder is filled with a rubber cushion, which can avoid scratching your phone and prevent it from slipping off.5.There is a parking number plate on the back side, which perfectly solves parking problems.

Read more less

1.Fast charging: The car charger mount is designed with a fast charging system that allows you to charge your phone in seconds.2.Easy to store and carry: The mobile phone holder is small and lightweight, easy to carry and store. it can be easily put in your pocket or bag when not in use.3.Design with care: This phone charger mount is a must-have accessory for your car,it is made with premium quality materials, which is durable and long lasting.4 Input voltage/current :5V/2A,9V/1.68A 5.Wireless charging output power :15W, 10W, 7.6W automatic recognition6. Built-in lithium battery 200 mah

Read more less

1.Smart Infrared Sensor Design: Automatic opening and clamping design for one-handed operation, making everything easier and safer. Simply place the phone inside the holder and the clip will close and provide a firm and stable hold. Touch the quick-release button on either side and the holder will rotate to level the screen. When your phone is fully charged, the wireless car charger will automatically power off and last the life of your phones battery2.Qi Wireless Charger and Phone Holder: The 2-in-1 design combines the Qi wireless charger and the car phone holder in one device. The wireless car charger provides fast charging for your phone and keeps you free from cables and phone cases while driving.3.Strong Suction Cups and Adjustable Viewing Angle: You can install the wireless car charger holder multiple times, and it can be securely mounted on windshields, dashboards, and tables with strong suction cups. Full 360-degree rotation allows for optimal viewing angles and easier use of features, which is the safest way to access cell phone systems like GPS and phone4. Faster Charging: No need to remove the case when charging (most cases on the market, except for rough, uneven ones.). The car mount can hold all phones with 60-80mm width tightly, which is good for all QI-supported phones5.Product features: Over-current / over-temperature protection, CE / FCC / ROHS certification, Appearance patent certification, Touch sensor6. Built-in lithium battery: 200 mah

Read more less

1.Input voltage/current: 5V/2A,9V/1.67A2.Input voltage of magnetic head: DC 5V/2A3.Support Specifications: Qualified with QIWireless Protocol Charging4.Support QC wireless fast charging equipment such as:HUAWE P40 Pro/Mate30/Mate20/Mate RS/iPhone 14/iPhone 14 Pro/iPhone 14 Pro Max/iPhone 13/iPhone 13 Pro/iPhone 13 Pro Max/iPhone 12/iPhone12 Pro/iPhone 12 Pro Max/iPhone 11/iPhone 11 Pro/iPhone 11 Pro Max/iPhone X/iPhone XS Max/iPhone XR/iPhone 8/iPhone 8X/Samsung Galaxy Note20/Samsung Galaxy Note10+5G/Samsung Galaxy Note10/Samsung Galaxy Note9/Samsung GalaxyNote8/Samsung S20/Samsung Galaxy S10+/Samsung Galaxy S10/Samsung Galaxy S9+/Samsung Galaxy S9/Samsung Galaxy S8+Other Qi devices that support wireless charging5.Packing list: vehicle wireless charging host *1, air outlet clip *1 set, data cable *1, manual *1, magnetic suction head *3

Read more less

1.Input voltage of magnetic head: DC 5V/2A2.Input voltage/current: 5V/2A,9V/1.67A,12V/1.5A3.After the equipment is powered on with DC5V-12V power supplyand DC5V-12V power supply, the equipment will automaticallyclamp the telescopic arm once, and the blue indicator lightwill turn on and turn red, and the indicator light will be on fora long time. At this time, the device enters the normal standbystate. When the front of the object is 5cm-20cm close tothe device, the device will automatically open its arms. Afterputting the mobile phone into the device, the device willautomatically clamp the mobile phone. At this time, thewireless charging will automatically charge the mobile phone.When charging, the blue indicator light (breathing light) ofthe device will be on. (mobile phone with wireless chargingfunction is required). When you need to take out the mobilephone, you need to touch the front sensing area of the device.and the device will automatically open its arms and take it away4.This device has over-voltage protection,over-temperatureprotection,magnetic field protection,short-circuit protectionif the device is abnormal,it will automatically stop working.5.Some support wireless fast charging equipmentIPHONE:Iphone8/8P/X/XS/XSmax/11/11Pro/11PromaxHUAWEI:Mate RS/Mate20 Pro/Mate20 RS/P30 Pro/P40 ProSAMSUNG:S7/S7 edge/S8/S8+/S9+/S10XIAOMI:MIX2S/MIX3/NI9/106. Built-in lithium battery: 200 mah

Read more less

1.Input voltage of magnetic head: DC 5V/2A2.Input voltage/current: 5V/2A,9V/1.67A,12V/1.5A3.After the equipment is powered on with DC5V-12V power supplyand DC5V-12V power supply, the equipment will automaticallyclamp the telescopic arm once, and the blue indicator lightwill turn on and turn red, and the indicator light will be on fora long time. At this time, the device enters the normal standbystate. When the front of the object is 5cm-20cm close tothe device, the device will automatically open its arms. Afterputting the mobile phone into the device, the device willautomatically clamp the mobile phone. At this time, thewireless charging will automatically charge the mobile phone.When charging, the blue indicator light (breathing light) ofthe device will be on. (mobile phone with wireless chargingfunction is required). When you need to take out the mobilephone, you need to touch the front sensing area of the device.and the device will automatically open its arms and take it away4.This device has over-voltage protection,over-temperatureprotection,magnetic field protection,short-circuit protectionif the device is abnormal,it will automatically stop working.5.Some support wireless fast charging equipmentIPHONE:Iphone8/8P/X/XS/XSmax/11/11Pro/11PromaxHUAWEI:Mate RS/Mate20 Pro/Mate20 RS/P30 Pro/P40 ProSAMSUNG:S7/S7 edge/S8/S8+/S9+/S10XIAOMI:MIX2S/MIX3/NI9/106. Built-in lithium battery: 200 mah

Read more less

1.Input voltage of magnetic head: DC 5V/2A2.Input voltage/current: 5V/2A,9V/1.67A,12V/1.5A3.After the equipment is powered on with DC5V-12V power supplyand DC5V-12V power supply, the equipment will automaticallyclamp the telescopic arm once, and the blue indicator lightwill turn on and turn red, and the indicator light will be on fora long time. At this time, the device enters the normal standbystate. When the front of the object is 5cm-20cm close tothe device, the device will automatically open its arms. Afterputting the mobile phone into the device, the device willautomatically clamp the mobile phone. At this time, thewireless charging will automatically charge the mobile phone.When charging, the blue indicator light (breathing light) ofthe device will be on. (mobile phone with wireless chargingfunction is required). When you need to take out the mobilephone, you need to touch the front sensing area of the device.and the device will automatically open its arms and take it away4.This device has over-voltage protection,over-temperatureprotection,magnetic field protection,short-circuit protectionif the device is abnormal,it will automatically stop working5.Some support wireless fast charging equipmentIPHONE:Iphone8/8P/X/XS/XSmax/11/11Pro/11PromaxHUAWEI:Mate RS/Mate20 Pro/Mate20 RS/P30 Pro/P40 ProSAMSUNG:S7/S7 edge/S8/S8+/S9+/S10XIAOMI:MIX2S/MIX3/NI9/106.Built-in lithium battery: 200mah

Read more less

1.1200 degree rotating design, with four movable joints, which can be flexibly adjusted to any angle to suit your driving.2.Universal mobile phone holder, compatible with mainstream mobile phones on the market, can be placed with one hand to ensure driving safety.3.Made of high-quality materials, using high-quality ABS+ alloy materials, giving the bracket a good texture.4.The gripper of the holder is filled with a rubber cushion, which can avoid scratching your phone and prevent it from slipping off.5.There is a parking number plate on the back side, which perfectly solves parking problems.

Read more less

1.Fast charging: The car charger mount is designed with a fast charging system that allows you to charge your phone in seconds.2.Easy to store and carry: The mobile phone holder is small and lightweight, easy to carry and store. it can be easily put in your pocket or bag when not in use.3.Design with care: This phone charger mount is a must-have accessory for your car,it is made with premium quality materials, which is durable and long lasting.4 Input voltage/current :5V/2A,9V/1.68A 5.Wireless charging output power :15W, 10W, 7.6W automatic recognition6. Built-in lithium battery 200 mah

Read more less

1.1200 degree rotating design, with four movable joints, which can be flexibly adjusted to any angle to suit your driving.2.Universal mobile phone holder, compatible with mainstream mobile phones on the market, can be placed with one hand to ensure driving safety.3.Made of high-quality materials, using high-quality ABS+ alloy materials, giving the bracket a good texture.4.The gripper of the holder is filled with a rubber cushion, which can avoid scratching your phone and prevent it from slipping off.5.There is a parking number plate on the back side, which perfectly solves parking problems.

Read more less

1. Built in soundproof partition, ultra quiet 2. 15W high-power, ultra fast charging 3. Touch + infrared sensing closure, convenient and fast 4. Upgrade the clamping arm, three-point support, and be as stable as a rock 5. Rear touch button, tap to automatically open 6. Smart chip, fast charging without damaging the phone 7. Horizontal rotation, move as needed (360 rotatable) 8. Cyberpunk + fashionable and transparent, scientific and aesthetic 9. Built-in 200mAh battery, can touch to open contracts 1000 times Parameter 1. Material: ABS/PC+Magnalium 2. Input: DC5V/2A, 9V/1.67A 3. Output: 15W/10W/7.5W/5W/automatic recognition charging 4. Charging power: 110K-205KHz 5. Charging interface: Type-C 6. Wireless charging sensing distance: 0-5mm 7. Size: 65x20x130mm 8. Net weight: 117g

Read more less

1. Built in soundproof partition, ultra quiet 2. 15W high-power, ultra fast charging 3. Touch + infrared sensing closure, convenient and fast 4. Upgrade the clamping arm, three-point support, and be as stable as a rock 5. Rear touch button, tap to automatically open 6. Smart chip, fast charging without damaging the phone 7. Horizontal rotation, move as needed (360 rotatable) 8. Cyberpunk + fashionable and transparent, scientific and aesthetic 9. Built-in 200mAh battery, can touch to open contracts 1000 times Parameter 1. Material: ABS/PC+Magnalium 2. Input: DC5V/2A, 9V/1.67A 3. Output: 15W/10W/7.5W/5W/automatic recognition charging 4. Charging power: 110K-205KHz 5. Charging interface: Type-C 6. Wireless charging sensing distance: 0-5mm 7. Size: 65x20x130mm 8. Net weight: 117g

Read more less

1. 15W ultra-fast charging 2. Upgraded clamp, three-point support, stable gripping 3. Touch key on the back, tap and open automatically 4. Smart chip, fast charging without harming the phone 5. Free rotation, adjust it on demand (360 rotary) 6. Built-in 200mAh battery, 1000 times opening and close 7. Cyberpunk + transparent style, to see the beauty of technology Parameter 1. Material: ABS/PC+Magnalium 2. Input: DC5V2A, 9V/1.67A 3. Output: 15W/10W/75W/5W/automatic recognition charging 4. Charging power: 110K-205KHz 5. Charging interface: Type-C 6. Wireless charging sensing distance: 0-5mm 7. Size: 111x70x46mm 8. Weight: 123.5

Read more less

1.Built-in magnet (iP12/13 charging coil alignment is more accurate, does not fall)2.Wireless charger with LED night atmosphere light3.With the transparent design, it has a unique appearance4.Made of aluminum alloy with tempered glass surface5.Exquisite workmanship, combined with CNC processing, strong and durable

Read more less

1. Durable Material: The Cell Phone Stand is made of Aluminum alloy material, suitable for high and low temperatures. It is made of durable material and therefore has a long service life.2. Not Occupying Space: The Car Mobile Phone Holder can be installed on display screens, instrument consoles, windshields, etc., making it easy to hide and without occupying any car inner space. 3. Strong Magnet: The Smartphone Mount has strong magnets, which are stable and reliable without falling off, ensuring the safety of your phone.4. 360 Degree Rotation: Car Phone Holder can be used vertically and horizontally, without blocking the view, making navigation safer. The Car Phone Holder can be rotated 360 degrees, easily adjusted, folded and stored without blocking the view.5. Suitable for All Sizes of Mobilephones: The Mobile Phone Holder can be used with different sizes of mobile phones, and can be adjusted freely according to the size of the phone. The maximum length can be pulled up to 33mm.

Read more less

1.Built-in magnet (iP12/13 charging coil alignment is more accurate, does not fall)2.Wireless charger with LED night atmosphere light3.With the transparent design, it has a unique appearance4.Made of aluminum alloy with tempered glass surface5.Exquisite workmanship, combined with CNC processing, strong and durable

Read more less

1.Input voltage/current: 5V/2A,9V/1.67A2.Support specification:charging according to Ql wireless protocol3.This equipmenthas overvoltage protection, overtemperature protection, magnetic field protection, shortcircuit protection,lf the equipment is abnormal, it willautomatically stop working4. The built-in battery of the body equipment, withoutconnecting the power cable,The opening, closing andtightening of the bracket work normally (wireless chargingdoes not work), touch the frontOr the position of the backtouch sensor is open, and the LOGO atmosphere lightis on for 5 secondslt turns off automatically and closesthe phone automatically5.Equipment supporting QC wireless fast chargingsuch as HUAWEIP40 Pro/Mate 40/30/20/HUAWEIMate RS/iphone 14/14Pro/14Pro Max/iphone 13/13Pro/13Pro Max/iphone 12/12Pro/12Pro Max/iphone 11/11Pro/11Pro Max/iphone X/XS Max/XR/iphone 8 Plus/iphone 8/Samsung Galaxy Note20/Note10+5G/Note10/Note9/Note8/Samsung S20/S9+S8+,etcSupport wireless charger6. Built-in lithium battery: 200 mah

Read more less

1. Material: ABS+PC 2. Size: 61.5x86mm 3. Weight: about 87g 4. USB-C input: 5V/9V-3A 5. Wireless charging output: 5W/7.5W/10W/15W 6. Instant charging, easy to use. 7. N52 strong magnet, one stick and fit, stable and not easy to fall. 8. With its own independent control switch, it can be powered off when fully charged to avoid overcharging and loss of battery health. 9. With its own ambient light design, it is convenient to use in dark environments. 10. Take and place with one hand, 360-degree adjustable viewing angle, support horizontal and vertical screen use, and can be adjusted to your comfortable direction. 11. Double-hook anti-drop design is adopted, and the rotating chuck nut is reinforced to firmly lock the blade without shaking.

Read more less

1. Material: PC, electronic components2. Input: DC12-24V3. Output: 3.6-6V/3A, 6-9V/2A, 9-12V/1.5A4. Total power: 36W5. Data cable length: 100 cm6. Suitable for most vehicles7. Using VO grade fireproof PC material, safe and stable8. Metal contacts, no fear of bumps, firm and stable charging9. Dimensions: 6.7 x 2.7 cm

Read more less