CN Warehouses

1. For A4 inkless thermal printer 2. Waterproof and oil-proof, water-proof writing will not fall off 3. No ink is required, does not contain bisphenol A, and is harmless to the human body 4. Scratch-resistant and wear-resistant, the printed content is not easily scratched off 5. Stable printing, clear and efficient 6. Material: paper 7. Note: The printer in the picture is not included!

Read more less

1. The frequency, power indicator, and signal strength bar are clearly and intuitively displayed on the LED screen.2. Built-in dual antennas, resistant to WiFi, electromagnetic and other interference, with the characteristics of anti-interference and longer transmission distance (30m).3. 24-bit/48kpbs high resolution, Mic/Line modes available for switching.4. The received signal is strong, stable and fast.5. Small wireless system with built-in lithium battery, plug and play, easy to operate.6. Supports dynamic microphones and condenser microphones with built-in power supply.7. Equipped with XLR female to 6.35mm male microphone adapter, compatible with mixers, recorders, speakers, PA systems, amplifiers, etc. Provide stable and reliable wireless transmission.Specification:1. Material: ABS2. Number of channels: 63. Transmission distance: about 30 meters4. Duration: stable for 5 hours5. Power supply: built-in rechargeable lithium battery6. Delay: about 5ms7. Sound dynamics: 110dB8. Sampling rate: 24bit / 48 kpbs audio9. Frequency response: 20Hz-20kHz10. Antenna impedance: 50Ω11. Signal-to-noise ratio: 110dB12. Battery: 3.7V 400mAh lithium-ion battery13. Supported microphone types: dynamic microphone and built-in power condenser microphone14. Product dimensions: 70 x 30 x 30 mm15. Weight: 200 g

Read more less

1. Material: metal2. Input type: LINE IN (O IN)3. Output type: LINE OUT (O OUT)4. Built-in battery: None5. Recommended headphone impedance: 65-80 ohms (MAX)6. Type: mini amplifier7. Power adapter: US standard8. Ultra-compact stereo headphone amplifier for studio and stage applications.9. 8 headphone output channels and 1 input channel10. The volume of each output channel can be controlled independently11. Ultra-low noise 4580 operational amplifier with excellent performance12. Comes with DC 12V power adapter13. Product size: approximately 19.6x5.7x3.1cm14. Product weight: 350gPacking list:Amplifier x 1Power adapter x 1English manual x 1Only the above package contents, other products are not includedNote: different lighting and monitors may cause the color of the item in the picture to be slightly different from the actual item, measurement tolerance is +/- 1- 3cm

Read more less

1. Made of high-quality ABS, wear-resistant and durable, giving you a comfortable feel.2. Brand new replacement remote control, ready to use without setting up.3. Comfortable buttons, made of silicone material, sensitive to operation, durable in use for a long time4. No programming required, just install the battery and it will work normally. (2 AA batteries not included)5. Compatible brands: suitable for Samsung smart TVs6. Model: BN59-01312F

Read more less

1. Universal gauge material: brass + inner tank holder 2. Outer quilt material: PVC matte black OD7.8MM 3. Rated power: 3250W 4. Rated current: 13A 5. Length: 0.25m 6. Extend the cable body to solve the problem of short cables in the original equipment and say goodbye to the constraints of short cables. 7. Thick copper core, low resistance, low heat generation, anti-oxidation, conductive block, stable transmission 8. Small size, does not take up space, can be placed smoothly and not easily rolled during plugging and unplugging. 9. Supports 3250W high power and can be used with various plug appliances such as electric vehicle chargers, desk lamps, and induction cookers.

Read more less

1. Universal gauge material: brass + inner tank holder 2. Outer quilt material: PVC matte black OD7.8MM 3. Rated power: 3250W 4. Rated current: 13A 5. Length: 2m 6. Extend the cable body to solve the problem of short cables in the original equipment and say goodbye to the constraints of short cables. 7. Thick copper core, low resistance, low heat generation, anti-oxidation, conductive block, stable transmission 8. Small size, does not take up space, can be placed smoothly and not easily rolled during plugging and unplugging. 9. Supports 3250W high power and can be used with various plug appliances such as electric vehicle chargers, desk lamps, and induction cookers.

Read more less

Features1. Wireless microphone makes you move freely and do energetic and active performances 2. The rechargeable and portable receiver only needs to charge for long time 3. Plug and Play, cable-free, frequency automatic pairing, AA battery-powered handheld microphone, and 18650 lithium rechargeable battery powered receiver makes it portable (Note: The AA batteries and 18650 batteries are not included) 4. The microphone can be connected to multiple audio systems including speakers, amplifiers, wireless mic systems. Wireless microphones will give you the mobility and freedom of movement for stage performances, speeches, churches, weddings, etc.Specifications1. ABS pipe + silicone 2. Transmitter frequency: 765.4Mhz, 763.4Mhz 3. Receiver battery: 18650 (not included) 4. Transmitter battery: AA (not included) 5. Receiver audio port: 3.5mm 6. Receiver charging port: type-c 7. Signal-to-noise ratio: greater than or equal to 70dB 8. Frequency response range: 100Hz-20KHzHighlight1. Type: Handheld 2. Sound field force: Combined type 3. Directivity: Supercardioid 4. Energy conversion principle: Electric type 5. High-sensitivity dynamic microphone core 6. Impedance: 580 ohms 7. Sensitivity: -50.7dBPackage List1. Receiver x 1 2. Transmitter x 2 3. Anti-slip ring x 2 4. Charging cable x 1 5. Windproof cover x 2 Batteries not included

Read more less

1. Fully DVB-S/S2/S2X/T/T2/C compliant, Live FTA digital picture and sound. 2. Support H.264/H.265(10 Bit) hardware decoding.3. Digital measuring device for signal strength and quality, supports presetting all satellite information.4. Support AV in and AV/HDMI out function.5. 4.3 inch LCD Colour Screen.6. 4000mAh Lithium-ion battery, normal work up to 4-6 hours. 7. Support 13V/18V/LOCK status panel LED display directly. 8. Support battery power display.9. Software upgradeable via USB and Wifi network (Wifi for MT7601 chip). 10. Supports scan of Auto, Blind, Manual or NIT, Sound for Locking Signal. 11. Supports DISEQC 1.0/1.1/1.2, unicable, 0/22kHz tone, auto calculate angle of AZ, EL.12. Support compass function, speaker integrated. 13. Support real-time power display, with low power reminder. 14. LNB short protect.Main Features:1. System capabilities: Full HD DVB-S/S2/S2X/T/T2 & H.265 Complian, Fully DVB compliant2. Video Decode: AC-3, MPEG-2 MPEG-4 MP HL, H.264 BP MP&HP L4.1, AVS profile L6.1/4.0/2.03. PAL/NTSC: Automatic PAL/NTSC conversion4. Channels Number: 6000 channels TV and Radio programmable5. Favorites: 8 different favorite groups selection6. OSD Language: English, German, French, Portuguese, Spanish, Italian, Russian, Turkish, Polish, Arabic, Farsi, Espanol, Deutsch7. OSD Color: 16-bit OSD with anti-flickering8. Channel Search: Channel search in automatic, manual and network search 9. Channel Edit: Various channel editing function(favorite, move, lock, skip, delete, rename, find, sort) 10. Easy Menu: Plug and Play installation, with an easy to use Menu System11. SoftUpgrade: Software upgrade through USB12. Save Channel: Automatic save for last channel13. Li-on Battery: 4000mAh14. Power Supply: DC12V/1500mA (Input 100V-240V, 50/60Hz)15. Panel display: 4.3 inch LCD Colour Screen16. Output Interface: HDMI(up to 1080P) output, LNB-IN x 2, DV-OUT, AV-OUT, AV-IN, USB, Power supplyElectric Performance1. System resource: Flash Memory: 64MB Serial FlashDDR3 Memory: 1GB DDR32. LNB/Tuner input:Connector: F-type maleFrequency range: 950MHz-2150MHzInput Impedance: 75ΩSignal lever: -65dBm to -25dBmActive Ant Power: 13/18V DC 400mA MAX, Overload ProtectionLNB switch control: 22KHzDiSEqC: Ver 1.0/1.1/1.23. Demodulator:Front end: QPSK(S), QPSK, 8PSK, 16APSK, 32APSK(S2)Modulation range: 2Mbps-45MbpsSCPC and MCPC Capable: YesSpectral inversion: Auto conversionPacking listDigital satellite meter x 1User manual x 1AV cable x 1Car charger cable x 1Adaptor x 1

Read more less

1. Material: copper core + PVC body + metal shell2. Craftsmanship: gold-plated process3. Connectors: 3.5 male to XLR female audio connector4. Outer diameter of cable body: about 6mm5. Length: 1.5m, 3m, 5m, 10mFunctional features:1. Thickened cable, strong and durable, solid materials, rigorous workmanship, the outer diameter of 6mm, durable, soft PVC cable body with good elasticity and toughness2. Good sound quality comes from good materials, thicker core, better and more stable signal transmission, sound quality is more pure, clear and lossless, no noise and no current sound, restore the original sound quality3. Wire body and connectors are firmly connected, not easy to loosen, the standard slot design, so you no longer worry about loose interfaces in use4. Equipment connected to each other, stable transmission, so that the sound into the ear more delicate, richer and fuller levels, the transmission of a clearer sound5. Wide range of applicable equipment, suitable for microphone/microphone/amplifier/mixer/mobile phone/computer and other equipment connected to each other

Read more less

1. Shell material: plastic2. Power supply voltage: 220V3. Battery capacity: 550mAh4. Multi-function time control switch, power failure memory, intelligent chip accurate timing, energy saving, high pressure efficiency, long service life5. Built-in rechargeable battery, the user sets the time, automatically open and close the power supply of various electrical equipment6. 20 groups of switch appointment time settings, can be set daily or weekly cycle control, multiple timing time adjustable7. Low power consumption, simple operation, small size, universal, simple and convenient, no need to pull out the previous tone after each current connection8. Simple installation steps, wide measurement range, good performance, widely used in production equipment, street lights, advertising lights, LED lights, warehouse exhaust dehumidification, agriculture, radio and television, etc.9. Weight: about 120 g10. Size: about 8.7 x 6.5 cm

Read more less

1. Easily handles a variety of flooring types, including hardwood, tile, laminate and carpet, making it easy to maintain a spotless home.2. LED light design, can help you easily find dust in corners, under the bed and on the sofa, so the dust will not stay in dark places.3. With its efficient design and strong nylon bristles, this floor brush easily removes embedded dirt and debris from carpets and rugs, leaving your floors spotless.4. Made from high-quality materials, designed to withstand regular use and provide long-lasting performance.5. Dimensions: 260 x 115mm

Read more less

1. Coil voltage: AC 220V2. Working current: 9A-95A3. Insulation voltage: 690V4. Wiring capacity: 4-10 square millimeters5. Installation: rail/screw mountingFeatures:1. Description: selection on demand, CJX2-xx10: normally open, energized suction; CJX2-xx01: normally closed, energized disconnection; CJX2-xx11: an open and a closed2. 8 contacts, silver alloy material, strong conductivity, more stable contact when connecting with larger size3. 32 pieces of iron core, suction more smooth and tight, real material, two silicon steel iron core4. Copper core coil, when the coil is energized, the static iron core generates electromagnetic suction, which sucks the iron core together5. A variety of uses, control equipment, load is too large with the use of temperature control, time control, water level control, etc.6. Rated current is not equal to the agreed heating current, please take the rated current as the standard purchase, long-term work under the agreed heating current will cause damage to the equipment or reduce the life of the AC contactor, damage

Read more less

1. Made of high-quality ABS, wear-resistant and durable, giving you a comfortable feel.2. Brand new replacement remote control, ready to use without setting up.3. Comfortable buttons, made of silicone material, sensitive to operation, durable in use for a long time4. No programming required, just install the battery and it will work normally. (2 AA batteries not included)5. Remote control distance: about 8m6. Frequency: 433MHz

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Wide compatibility: The microphone handle is suitable for RODE Wireless Go, Wireless Go II, Wireless ME, DJI Mic, Lark150, CaTeFo Star200, Star500 and other wireless transmitters2. Integrated cold shoe socket design, compatible with mainstream microphones, plug and play3. High-density windproof sponge, effective noise reduction4. The microphone handle is made of ABS plastic, lightweight and portable.5. Dimensions: 238 x 42 x 24.5mm

Read more less

1. The remote control has buttons, which is easy to use and can be easily controlled with one hand.2. Suitable for Daikin 433A1 air conditioner remote control3. No programming or setup required.4. Note: It is not original, it is a replacement! Most of the features are the same as the original remote, but may have some different buttons!5. Material: ABS plastic6. Power supply method: AAA battery (not included)7. Frequency: 433 MHz

Read more less

Module performance and features:1. With voltmeter display and voltmeter can be self-calibrating, using a more advanced voltage microprocessor, voltmeter error 0.05V, range 0-40V (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4.5V)2. With power indicator, touching the button to switch the measurement of input or output voltage, and there is an indicator to show which voltage is being measured, and save the settings, even if the power is off and on again3. Voltmeter can be turned off, when not needed when touching the left button can be easily realized4. With terminal block, easy to use without soldering iron, and retain the soldering wire junction point5. Input voltage 4.0-38V (input voltage must be higher than output voltage by more than 1.5V)6. Adjustable output voltage range 1.25V-36V continuously adjustable (input voltage must be 1.5V higher than output voltage)7. Output current up to 5A, it is recommended to use within 4.5A8. Output power up to 75W, more than 50W, please strengthen the chip cooling (that is, must add a small heat sink)9. High conversion efficiency, up to 96% (efficiency and input and output voltage, current, pressure difference)10. Operating frequency: 180KHZ11. Load adjustment rate S (I) less than 0.8 percent, voltage adjustment rate S (u) less than 0.8 percent12. With thermal protection and short-circuit protection (but short-circuit there is an accident, try not to short-circuit)13. Board size: about 7 x 4.7 cmApplications:DC/DC step-down module is used in the field of input voltage higher than the output voltage step-down, such as batteries, power transformers, DIY adjustable voltage regulator power supply, LCD monitors and LCD TVs, portable instrument power supply, telecom/network equipment, 24V car laptop power supply, industrial equipment step-down, 12V step-down to 3.3V, 12V step-down to 5V, 24V step-down to 5V, 24V step-down to 12V, 36V to 24V, etc.

Read more less

1. The remote control has buttons, which is easy to use and can be easily controlled with one hand.2. Applicable to Gree YBOF YB1FA YB1F2 YBOF1 YBOF2 YBOFB Y502K3. No programming or setup required.4. Note: It is not original, it is a replacement! Most of the features are the same as the original remote, but may have some different buttons!5. Material: ABS plastic6. Power supply method: AAA battery (not included)

Read more less

1. Bluetooth version: 5.02. Operating voltage: DC8-24V3. Transmission distance: 15 meters (visible and unobstructed)4. Number of channels: dual-channel (stereo)5. Adaptable speaker power (30W-150): 4 ohms (8-12V power supply), 8 ohms (8-24V power supply), 16 ohms (8-24V power supply)6. Module protection mechanism: reverse power supply protection, short-circuit protection, self-recovery overheating protection7. Note: to improve the performance of the module, it is recommended to work more than 20W x 2 application scenarios under the amplifier chip plus heat dissipation8. Anti-static bag packaging, acrylic panels have a protective film, please tear off when assembling9. Module size: about 5 x 3.3 cmOperating instructions:1. After turning on the power, the blue indicator light will flash quickly to enter the Bluetooth mode2. Enter pairing mode and wait for pairing after announcing the beep3. Mobile phone bluetooth search to XY-P15W (amplifier board device name), click XY-P15W connection4. After successful connection, play the tone, the indicator light will be on, you can play the music on your cell phone, and the indicator light will flash slowly when playing the music5. Bluetooth disconnect the amplifier board to prepare for the next pairing, and play the tone after entering the pairing mode waiting for the pairingPrecautions for use:1. Amplifier board to use as far away from WIFI signals (router)2. Recommended power supply voltage DC 8-24V, more than 26V, the chip will be burned3. Connect 4 ohm speakers when the power supply does not exceed 12V, connect 8 ohm speakers when the power supply does not exceed 24V4. Recommended power supply current is more than 2A5. Module working power more than 20W x 2, need to add heat sinks6. The speaker cable should not be too long, ensure that 1 meter or less is suitable7. Pay attention to electrostatic protection, contact the amplifier board before the need to release the hand of static electricity, to avoid static electricity will chip breakdown, bluetooth chip is more sensitive to static electricity8. It is recommended to adapt to the speaker rated power 30W and above, to avoid burning the speaker heat

Read more less

1. This module complies with international safety standards, with isolation slots between the control area and the load area2. Using relays, with power and relay action indication, absorb bright, disconnect not bright3. When there is signal at the signal input, the common terminal and the normally open terminal will conduct4. It can be used as a microcontroller development board module, and can be used for home appliance control5. Control DC or AC signals, can control 220V AC loads6. There is a normally open and a normally closed contacts7. Blue KF301 terminals to connect the control line is more convenient8. Weight: about 12.4 g9. Size: about 4.3 x 2.7 cmAbout the high level and low level trigger mode description:1. High level triggering refers to the triggering mode where there is a voltage between the signal input and ground, which can be understood as a mode of triggering by short-circuiting the signal input and the positive pole of VCC2. Low level trigger refers to the trigger mode where the voltage between the signal input and the ground is OV, which can be understood as a mode where the signal input is triggered by a short circuit with the negative pole of GND

Read more less

1. Voltage: 220V2. Power supply: use 1 x 12V A23 battery (not included)3. Output motor current: less than 3A4. The longest effective time of one key: 120 seconds, more than 120 seconds, the controller will cut off the power supply of the motor5. Operating frequency: RF 315MHz or 433.9MHz, IR 38KHz6. Remote control distance: RF: within 20m; IR within 10m; about 15 degrees horizontal7. Weight: about 165g

Read more less

1. Applicable models: for Meta Quest32. Material: ABS3. Lighting modes: four (RGB gradient mode, static light mode, breathing mode, flash mode)4. Battery capacity: 8000 mAh polymer battery5. Head circumference size: 40-68mm6. Net weight: 450 grams7. RGB colorful luminous marquee8. The head circumference is adjustable, stable and not easy to fall off9. Sturdy knob, easy to adjust, durable, better comfortable for your head10. Built-in 8000mAh large-capacity battery, long battery life11. Foldable design, you can adjust the angle at will, making it easy and portable12. Ergonomic design, effectively dispersing the wearing gravity, and full head bow design to improve comfort.Packing list:-Charging headset x 1-Charging cable x 1-Manual x 1

Read more less

1. The sound quality using this module is very good.2. Mono digital audio amplifier chip.3. High output and low power consumption.4. Applicable speaker impedance: 4-8 ohms (8 ohms is best).Product specifications:1. Power amplifier chip: TPA31182. Working voltage: DC8-24V3. Output power: 60W/30W4. PCB board size: 45 x 35mm/1.77 x 1.4in5. Weight: 12.3 grams

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Guidance display real battery data2. Read the battery information automatically3. Test whether original or not4. Modify the battery data5. Note: This product needs to be used with an i2C programmer6. Automatically update data guide-free. battery health automatically updates to 100% with 0 cycles

Read more less

1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly (OLED material) for ZTE Axon 30 Ultra 5G. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Charging port flex cable ribbon replacement for iPhone 14 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Charging port flex cable ribbon replacement for iPhone 14 Pro 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Touch Panel replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. SIM + SIM card tray for Honor Magic V. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM + SIM card tray for Honor 90. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM + SIM / Micro SD card tray for Honor X7. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM card tray for Honor X9b. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM + SIM card tray for Honor Magic5. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly with frame replacement part 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. SIM + SIM card tray for Honor Play 20 Pro. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM + SIM / Micro SD card tray for Honor X7. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. SIM + SIM card tray for Honor 90. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less