Products

1. Thickness of surface: 9H 2. Coating of oleophobicity: anti-oil, anti-acid and anti-alkali. 3. The product is environmentally friendly and pollution-free. 4. High safety coefficient, High touch sensitivity, Highly fit and dismantling. 5. High transparency and the color will never changes. 6. The surrounding part is smooth to protect the screen from being smashed.

Read more less

1. Thickness of surface: 9H 2. Coating of oleophobicity: anti-oil, anti-acid and anti-alkali. 3. The product is environmentally friendly and pollution-free. 4. High safety coefficient, High touch sensitivity, Highly fit and dismantling. 5. High transparency and the color will never changes. 6. The surrounding part is smooth to protect the screen from being smashed.

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once its been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  touch 7 , iPod touch 6 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 20cm * 11cm * 1.5cm / 7.87inch * 4.33inch * 0.59inch Qty per Carton 150 Carton Weight 0.75kgs / 1.65lb Carton Size 30cm * 20cm * 20cm / 11.81inch * 7.87inch * 7.87inch Loading Container 20GP: 2222 cartons * 150 pcs = 333300 pcs 40HQ: 5158 cartons * 150 pcs = 773700 pcs

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once its been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  touch 7 , iPod touch 6 Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 20cm * 11cm * 1.5cm / 7.87inch * 4.33inch * 0.59inch Qty per Carton 150 Carton Weight 3.40kgs / 7.50lb Carton Size 30cm * 20cm * 20cm / 11.81inch * 7.87inch * 7.87inch Loading Container 20GP: 2222 cartons * 150 pcs = 333300 pcs 40HQ: 5158 cartons * 150 pcs = 773700 pcs

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

Descriptions1. Ultra-thin and excellent flexibility. The screen is thick. you do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your iPhone 6 Plus & 6s Plus from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. 3D arc edge, smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it may work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  iPhone 6s Plus , iPhone 6 Plus Material Tempered Glass Thickness about 0.26 mm Package Include Package Contents Screen Protector x 1 Cleaning cloth x 1 Alcohol Pad x 1 Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 16.5cm * 8cm * 0.6cm / 6.5inch * 3.15inch * 0.24inch Qty per Carton 400 Carton Weight 28.00kgs / 61.73lb Carton Size 40cm * 35cm * 30cm / 15.75inch * 13.78inch * 11.81inch Loading Container 20GP: 634 cartons * 400 pcs = 253600 pcs 40HQ: 1473 cartons * 400 pcs = 589200 pcs

Read more less

Descriptions1. Ultra-thin and excellent flexibility. The screen is thick. you do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your iPhone 6 Plus & 6s Plus from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. 3D arc edge, smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it may work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  iPhone 6s Plus , iPhone 6 Plus Material Tempered Glass Thickness about 0.26 mm Package Include Package Contents Screen Protector x 1 Cleaning cloth x 1 Alcohol Pad x 1 Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 16.5cm * 8cm * 0.6cm / 6.5inch * 3.15inch * 0.24inch Qty per Carton 400 Carton Weight 28.00kgs / 61.73lb Carton Size 40cm * 35cm * 30cm / 15.75inch * 13.78inch * 11.81inch Loading Container 20GP: 634 cartons * 400 pcs = 253600 pcs 40HQ: 1473 cartons * 400 pcs = 589200 pcs

Read more less

Descriptions1. Ultra-thin and excellent flexibility. The screen is thick. you do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your iPhone 6 & 6s from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. 3D arc edge, smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it may work for a long time.Installation Instructions1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  iPhone 6s , iPhone 6 Material Tempered Glass Thickness about 0.26 mm Size 135 * 63.5 * 0.26 mm Weight 19g Package Include Package Contents Screen Protector x 1 Cleaning cloth x 1 Alcohol Pad x 1 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 16.5cm * 8cm * 0.6cm / 6.5inch * 3.15inch * 0.24inch Qty per Carton 400 Carton Weight 13.20kgs / 29.10lb Carton Size 40cm * 35cm * 30cm / 15.75inch * 13.78inch * 11.81inch Loading Container 20GP: 634 cartons * 400 pcs = 253600 pcs 40HQ: 1473 cartons * 400 pcs = 589200 pcs

Read more less

Descriptions 1.Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all. 2.High hardness. This tempered glass screen film has a high hardness up to 9H hardness. 3.High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4.Functional. The protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, oil, dust and so on.When stained with fingerprint, mud, oil or other attachments, it can be cleaned without effort. 5.Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly. 6.Durable. With good performance and high quality titanium alloy and tempered glass material , it may work for a long time. Cautions 1.As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2.It is not recommended to reuse the glass protector once it's been applied. 3.Using excessive force who installing or removing the screen protector may damage the product.

Read more less

Descriptions 1.Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all. 2.High hardness. This tempered glass screen film has a high hardness up to 9H hardness. 3.High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4.Functional. The protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, oil, dust and so on.When stained with fingerprint, mud, oil or other attachments, it can be cleaned without effort. 5.Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly. 6.Durable. With good performance and high quality titanium alloy and tempered glass material , it may work for a long time. Cautions 1.As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2.It is not recommended to reuse the glass protector once it's been applied. 3.Using excessive force who installing or removing the screen protector may damage the product.

Read more less

Descriptions 1.Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all. 2.High hardness. This tempered glass screen film has a high hardness up to 9H hardness. 3.High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4.Functional. The protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, oil, dust and so on.When stained with fingerprint, mud, oil or other attachments, it can be cleaned without effort. 5.Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly. 6.Durable. With good performance and high quality titanium alloy and tempered glass material , it may work for a long time. Cautions 1.As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2.It is not recommended to reuse the glass protector once it's been applied. 3.Using excessive force who installing or removing the screen protector may damage the product.Specification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 29cm * 22cm * 1.5cm / 11.42inch * 8.66inch * 0.59inch Qty per Carton 40 Carton Weight 21.00kgs / 46.30lb Carton Size 46cm * 32cm * 31cm / 18.11inch * 12.6inch * 12.2inch Loading Container 20GP: 584 cartons * 40 pcs = 23360 pcs 40HQ: 1356 cartons * 40 pcs = 54240 pcs

Read more less

Descriptions 1.Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all. 2.High hardness. This tempered glass screen film has a high hardness up to 9H hardness. 3.High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4.Functional. The protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, oil, dust and so on.When stained with fingerprint, mud, oil or other attachments, it can be cleaned without effort. 5.Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly. 6.Durable. With good performance and high quality titanium alloy and tempered glass material , it may work for a long time. Cautions 1.As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2.It is not recommended to reuse the glass protector once it's been applied. 3.Using excessive force who installing or removing the screen protector may damage the product. Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 30cm * 23cm * 1.5cm / 11.81inch * 9.06inch * 0.59inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 47cm * 46cm * 30cm / 18.5inch * 18.11inch * 11.81inch Loading Container 20GP: 411 cartons * 60 pcs = 24660 pcs 40HQ: 954 cartons * 60 pcs = 57240 pcs

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your MacBook would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your MacBook well and make a big difference on protecting your MacBook from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

Descriptions 1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness up to 9H hardness. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, oil, dust and so on.When stained with fingerprint, mud, oil or other attachments, it can be cleaned without effort. 5. Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly. 6. Durable. With good performance and high quality titanium alloy and tempered glass material , it may work for a long time. Cautions 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. It is not recommended to reuse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

Descriptions1. Ultra-thin and excellent flexibility.The screen is about 0.26mm thick.you do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness .This tempered glass screen film is made of premium tempered glass and has a hardness of 9H+,so it can prevent itself from being scratched or broken into pieces effectively and continually.If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition.The film has a high light transmission.With high light transmission and low light reflection,the film can provide you with a high definition screen just as usual. 4. Functional.The Screen Protector can fit your phone well and make a big difference on protecting your iPad Pro from scratch,fingerprint,water,oil,dust,shock,slip and so on.When stained with water,soil,mud,oil or other attachments,it can be cleaned without effort. 5. Smooth surface.Even the sides of screen film feels smoothly because of its arch design. 6. Convenient for use.It has excellent adhesion.To paste the film,the only thing you need to do is clean up the screen thoroughly. 7. Durable.With good performance and high quality,it may work for a long time.Installation Instructions1. Clean your phone with the micro fibre cloth. 2. Remove the protective film on the glass. 3. Put the glass on the screen. 4. If there are other accessories,please final installation.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once its been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1) Brand new and durable material 2) Oleophobic coated chemically treated glass 3) Border round angle for perfect grip 4) Ultra protection anti-chip 5) Round angle for easy control 6) Surface hardness: 9H 7) Slim chemical treatment processed tempered glass (thickness 0.55mm) 8) Highly responsive with the touchscreenSpecification: General Compatible with Apple:  iPhone 5S , iPhone 5 Material Tempered Glass Surface Hardness 9H Arc-edge Process 2.5D Edge Coverage Full Screen Coverage Thickness 0.26mm Quantity 1 PCS Features High-definition, Anti fingerprint, Anti scratch, Protect Screen Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 18cm * 10cm * 1cm / 7.09inch * 3.94inch * 0.39inch Qty per Carton 200 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 37cm * 22cm / 19.69inch * 14.57inch * 8.66inch Loading Container 20GP: 655 cartons * 200 pcs = 131000 pcs 40HQ: 1521 cartons * 200 pcs = 304200 pcs

Read more less

Package Inclusion1. Tempered Glass Film X 1; 2. Dry Wipes X 1; 3. Wet Wipes X 1; 4. Guide Sticker X 2; 5. Dust-absorber X 1. Descriptions1. Ultra-thin and excellent flexibility.The screen is about 0.26mm thick.you do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness .This tempered glass screen film is made of premium tempered glass and has a hardness of 9H+,so it can prevent itself from being scratched or broken into pieces effectively and continually.If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users. 3. High definition.The film has a high light transmission.With high light transmission and low light reflection,the film can provide you with a high definition screen just as usual. 4. Functional.The Screen Protector can fit your phone well and make a big difference on protecting your iPhone 6s Plus from scratch,fingerprint,water,oil,dust,shock,slip and so on.When stained with water,soil,mud,oil or other attachments,it can be cleaned without effort. 5. Smooth surface.Even the sides of screen film feels smoothly because of it's arch design. 6. Convenient for use.It has excellent adhesion.To paste the film,the only thing you need to do is clean up the screen thoroughly. 7. Durable.With good performance and high quality,it may work for a long time.Installation Instructions1. Clean your phone with the micro fibre cloth. 2. Remove the protective film on the glass. 3. Put the glass on the screen. 4. If there are other accessories,please final installation.Cautions1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.Specification: General Compatible with Apple:  iPhone 6s Plus Material Tempered Glass Thickness about 0.26 mm Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 9.5cm * 1.2cm / 6.69inch * 3.74inch * 0.47inch Qty per Carton 120 Carton Weight 5.04kgs / 11.11lb Carton Size 38cm * 30cm * 26cm / 14.96inch * 11.81inch * 10.24inch Loading Container 20GP: 899 cartons * 120 pcs = 107880 pcs 40HQ: 2088 cartons * 120 pcs = 250560 pcs

Read more less

Caution1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.About the product1. Premium tempered glass film is made with specially processed glass to protect the screen of the device from shocks and scratches 2. Oleo-phobic Coating - The oleo-phobic coating can prevent fingerprints or other stains, and make the film easy to clean 3. Sensitive Operation, Delicate Touch - The self-adhesive silicone can touch on the screen smoothly. It makes the installation easy and is more sensitive for operation 4. Whole transparency 5. Surface Hardness - Surafacehardness can effectively protect the screen from scratches and external shocks 6. Exquisite workmanship, ultra thin 7. Perfect adhesion 8. The product is eco-friendlyInstallation Instructions1. Clean your phone with the micro fiber cloth 2. Remove the protective film on the glass 3. Put the glass on the screen 4. If there are other accessories, please final installationCaution1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.About the product1. Premium tempered glass film is made with specially processed glass to protect the screen of the device from shocks and scratches 2. Oleo-phobic Coating - The oleo-phobic coating can prevent fingerprints or other stains, and make the film easy to clean 3. Sensitive Operation, Delicate Touch - The self-adhesive silicone can touch on the screen smoothly. It makes the installation easy and is more sensitive for operation 4. Whole transparency 5. Surface Hardness - Surafacehardness can effectively protect the screen from scratches and external shocks 6. Exquisite workmanship, ultra thin 7. Perfect adhesion 8. The product is eco-friendlyInstallation Instructions1. Clean your phone with the micro fiber cloth 2. Remove the protective film on the glass 3. Put the glass on the screen 4. If there are other accessories, please final installationCaution1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.About the product1. Premium tempered glass film is made with specially processed glass to protect the screen of the device from shocks and scratches 2. Oleo-phobic Coating - The oleo-phobic coating can prevent fingerprints or other stains, and make the film easy to clean 3. Sensitive Operation, Delicate Touch - The self-adhesive silicone can touch on the screen smoothly. It makes the installation easy and is more sensitive for operation 4. Whole transparency 5. Surface Hardness - Surafacehardness can effectively protect the screen from scratches and external shocks 6. Exquisite workmanship, ultra thin 7. Perfect adhesion 8. The product is eco-friendlyInstallation Instructions1. Clean your phone with the micro fiber cloth 2. Remove the protective film on the glass 3. Put the glass on the screen 4. If there are other accessories, please final installationCaution1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.About the product1. Premium tempered glass film is made with specially processed glass to protect the screen of the device from shocks and scratches 2. Oleo-phobic Coating - The oleo-phobic coating can prevent fingerprints or other stains, and make the film easy to clean 3. Sensitive Operation, Delicate Touch - The self-adhesive silicone can touch on the screen smoothly. It makes the installation easy and is more sensitive for operation 4. Whole transparency 5. Surface Hardness - Surafacehardness can effectively protect the screen from scratches and external shocks 6. Exquisite workmanship, ultra thin 7. Perfect adhesion 8. The product is eco-friendlyInstallation Instructions1. Clean your phone with the micro fiber cloth 2. Remove the protective film on the glass 3. Put the glass on the screen 4. If there are other accessories, please final installation

Read more less

1. Product interface: one end of the motherboard small 4pin connector, the other ends of the fan small 4pin interface2. Function: make multiple computer fans share a common interface3. Double-wall rubberized casing can effectively prevent the braided mesh from falling off4. 6mm diameter high-density braided mesh wrapped around the outside of the cable, full of texture5. Tinned copper material, strong corrosion resistance and oxidation resistance6. Stable and durable power supply, without affecting the performance of the fanParameters:1. Insulation material: PVC2. Conductor specification: 11 x 0.12TS3. Conductor material: tinned copper4. Outer diameter of wire: OD1.4mm5. Rated temperature: 80 degree celsius6. Wire type: 1007 24AWG7. Length: 27cm8. Weight:- 1 in 4: 21g- 1 in 3: 16g- 1 in 2: 11g- 1 in 1: 6g

Read more less

1. Product interface: one end of the motherboard small 4pin connector, the other ends of the fan small 4pin interface2. Function: make multiple computer fans share a common interface3. Double-wall rubberized casing can effectively prevent the braided mesh from falling off4. 6mm diameter high-density braided mesh wrapped around the outside of the cable, full of texture5. Tinned copper material, strong corrosion resistance and oxidation resistance6. Stable and durable power supply, without affecting the performance of the fanParameters:1. Insulation material: PVC2. Conductor specification: 11 x 0.12TS3. Conductor material: tinned copper4. Outer diameter of wire: OD1.4mm5. Rated temperature: 80 degree celsius6. Wire type: 1007 24AWG7. Length: 27cm8. Weight:- 1 in 4: 21g- 1 in 3: 16g- 1 in 2: 11g- 1 in 1: 6g

Read more less

1. Product interface: one end of the motherboard small 4pin connector, the other ends of the fan small 4pin interface2. Function: make multiple computer fans share a common interface3. Double-wall rubberized casing can effectively prevent the braided mesh from falling off4. 6mm diameter high-density braided mesh wrapped around the outside of the cable, full of texture5. Tinned copper material, strong corrosion resistance and oxidation resistance6. Stable and durable power supply, without affecting the performance of the fanParameters:1. Insulation material: PVC2. Conductor specification: 11 x 0.12TS3. Conductor material: tinned copper4. Outer diameter of wire: OD1.4mm5. Rated temperature: 80 degree celsius6. Wire type: 1007 24AWG7. Length: 27cm8. Weight:- 1 in 4: 21g- 1 in 3: 16g- 1 in 2: 11g- 1 in 1: 6g

Read more less

1. Wire material: copper2. It can supply power to two SATA interface hard drives or optical drives at the same time to make up for the lack of SATA interfaces3. The red core wire is for 5V power supply, and the yellow core wire is for 12V power supply4. The outer cover is made of PVC, which has good insulation and flame retardancy, and is safer to use. The toughness is solid, durable and not easy to break5. Length: 20cm

Read more less

Features 1. Durable. With good performance and high quality, it can work for a long time. 2. High hardness. This tempered glass lens film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition lens just as usual. 4. Functional. The lens protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on .When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of lens film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the lens thoroughly. Cautions 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product. Installation Instructions 1. Please use the alcohol swab and the microfiber fabric to clean the lens before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Specification: General Compatible with Apple:  iPhone 6s Plus , iPhone 6 Plus Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 8.4cm * 6.1cm * 1.1cm / 3.31inch * 2.4inch * 0.43inch Qty per Carton 200 Carton Weight 1.00kgs / 2.20lb Carton Size 12cm * 12cm * 10cm / 4.72inch * 4.72inch * 3.94inch Loading Container 20GP: 18518 cartons * 200 pcs = 3703600 pcs 40HQ: 42989 cartons * 200 pcs = 8597800 pcs

Read more less

Features 1. Durable. With good performance and high quality, it can work for a long time. 2. High hardness. This tempered glass lens film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition lens just as usual. 4. Functional. The lens protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on .When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of lens film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the lens thoroughly. Cautions 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product. Installation Instructions 1. Please use the alcohol swab and the microfiber fabric to clean the lens before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Specification: General Compatible with Apple:  iPhone 8 , iPhone 7 Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8.4cm * 6.1cm * 1.1cm / 3.31inch * 2.4inch * 0.43inch Qty per Carton 200 Carton Weight 4.20kgs / 9.26lb Carton Size 12cm * 12cm * 10cm / 4.72inch * 4.72inch * 3.94inch Loading Container 20GP: 18518 cartons * 200 pcs = 3703600 pcs 40HQ: 42989 cartons * 200 pcs = 8597800 pcs

Read more less

Features 1. Durable. With good performance and high quality, it can work for a long time. 2. High hardness. This tempered glass lens film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition lens just as usual. 4. Functional. The lens protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on .When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of lens film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the lens thoroughly. Cautions 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product. Installation Instructions 1. Please use the alcohol swab and the microfiber fabric to clean the lens before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly.Specification: General Compatible with Apple:  iPhone 8 Plus , iPhone 7 Plus Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 8.4cm * 6.1cm * 1.1cm / 3.31inch * 2.4inch * 0.43inch Qty per Carton 200 Carton Weight 1.00kgs / 2.20lb Carton Size 12cm * 12cm * 10cm / 4.72inch * 4.72inch * 3.94inch Loading Container 20GP: 18518 cartons * 200 pcs = 3703600 pcs 40HQ: 42989 cartons * 200 pcs = 8597800 pcs

Read more less

1. Brand new and high quality. 2. Convenient to place, sturdy clip can attach to a book, shelf, cupboard, or computer. 3. Eye protection, the bright LED provides natural and non-flickering white light. 4. Easy to use, flexible gooseneck allows you to illuminate it at any angle. 5. Lightweight and compact design, easy to carry. 6. Low power consumption soft white LED light. 7. With ON/OFF switch design. 8. Extra strong clip grips almost anything, or use free standing as a task light. 9. Powered by 2 x CR1220 battery 10. Lamp bead type: F5

Read more less

1. Focal diatance: 1-2.5cm 2. Interface: USB 2.0 3. CPU 1.8g or above 4. Memory above 256M 5. System: Windows SP4/XP/ VISTA /7 / MAC OS 10.5 or above

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 240*165*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 240*165*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 250*174*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 200*130*0.4mm 9. Weight: 30g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 200*130*0.4mm 9. Weight: 30g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 245*178*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 300*220*0.4mm 9. Weight: 65g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti Blue-ray. The film can insulate 90% Blue-ray, and keep high definition at the same time, to protect your eyes. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 280*214*0.4mm 9. Weight: 65g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 240*165*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 240*165*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 245*178*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 200*130*0.4mm 9. Weight: 30g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 200*130*0.4mm 9. Weight: 30g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 250*174*0.4mm 9. Weight: 50g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. Excellent flexibility. You do not need to worry whether the reflexes of your iPad would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. Anti-glare. Applying optical principles of polarized light, to anti peeping and protect privacy. 4. Functional. The screen protector can fit your iPad well and make a big difference on protecting your iPad from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the edge of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly. 7. Durable. With good performance and quality, it can work for a long time. 8. Size: 280*214*0.4mm 9. Weight: 65g Installation Instructions: 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions: 1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once its been applied. 3. Using excessive force who installing or removing the screen protector may damage the product.

Read more less

1. This sophisticated LED outdoor solar lamp is ideal for illuminating your house number at night.2. The environmentally friendly solar powered light charges in natural daylight and turns on automatically at dusk making your door number visible for visitors.3. Recharges using natural daylight and automatically turns on at dusk.4. 6 pieces of super bright white LED lights inside weather resistant casing.5. Quick & easy to install with no wiring needed. Wall fixtures included.6. Material: ABS,PC7. Color: As shown8. LED Beads Quantity: 69. Power: 0.36W10. Mode: Steady on/Off11. Solar Panel: 2V 130mA12. Battery: Ni-MH1.2V / 850mAh (included)13. Waterproof: IP6514. Working Time: about 8h15. Charging Time: about 6h16. Product packaging:1 x Solar energy digital lamp

Read more less

1. This sophisticated LED outdoor solar lamp is ideal for illuminating your house number at night.2. The environmentally friendly solar powered light charges in natural daylight and turns on automatically at dusk making your door number visible for visitors.3. Recharges using natural daylight and automatically turns on at dusk.4. 6 pieces of super bright white LED lights inside weather resistant casing.5. Quick & easy to install with no wiring needed. Wall fixtures included.6. Material: ABS,PC7. Color: As shown8. LED Beads Quantity: 69. Power: 0.36W10. Mode: Steady on/Off11. Solar Panel: 2V 130mA12. Battery: Ni-MH1.2V / 850mAh (included)13. Waterproof: IP6514. Working Time: about 8h15. Charging Time: about 6h16. Product packaging:1 x Solar energy digital lamp

Read more less

1. This sophisticated LED outdoor solar lamp is ideal for illuminating your house number at night.2. The environmentally friendly solar powered light charges in natural daylight and turns on automatically at dusk making your door number visible for visitors.3. Recharges using natural daylight and automatically turns on at dusk.4. 6 pieces of super bright white LED lights inside weather resistant casing.5. Quick & easy to install with no wiring needed. Wall fixtures included.6. Material: ABS,PC7. Color: As shown8. LED Beads Quantity: 69. Power: 0.36W10. Mode: Steady on/Off11. Solar Panel: 2V 130mA12. Battery: Ni-MH1.2V / 850mAh (included)13. Waterproof: IP6514. Working Time: about 8h15. Charging Time: about 6h16. Product packaging:1 x Solar energy digital lamp

Read more less