DJI FPV Series

1. The appearance and structure of this 3D skin-friendly mask have been optimized, and the bridge of the nose is equipped with an anti-leakage pad that can be cut freely and installed in two ways2. The inside of the mask is made of multi-layer sponge inner core, and the outer layer is made of skin-friendly Lycra fabric, which is made of environmentally friendly new technology, which effectively prevents light leakage and improves the overall wearing comfort3. Non-destructive installation, increase the value of glasses and individual needs.4. The headband is made of Lycra sports skin-friendly elastic fabric, the surface of the headband is perforated, breathable, sweat-resistant and washable5. Compatible products: suitable for DJI FPV Goggles V1 V26. Product net weight: 20g (weight of single eye pad)Specification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 21cm * 14cm * 5cm / 8.27inch * 5.51inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. It can charge the FPV intelligent flight battery, remote controller and goggles battery at the same time.2. Multiple output interfaces and output modes.3. 90W output power, fast charging.4. Input: 100 - 240 V, 50/60 Hz, 1.8 A5. output:- Battery interface: 25.2 V +/- 0.1 V; 3.57 A +/- 0.1 A (high current gear); 1 A +/- 0.2 A (low current gear)- USB interface: 5V / 2A (two)6. Rated power: 86WWarm Reminder: The charger does not include an AC power cord.Specification: Package Weight One Package Weight 0.49kgs / 1.07lb One Package Size 18cm * 15cm * 6cm / 7.09inch * 5.91inch * 2.36inch Qty per Carton 40 Carton Weight 17.50kgs / 38.58lb Carton Size 62cm * 32cm * 37cm / 24.41inch * 12.6inch * 14.57inch Loading Container 20GP: 363 cartons * 40 pcs = 14520 pcs 40HQ: 843 cartons * 40 pcs = 33720 pcs

Read more less

1. The 5.8G RX PORT 2.0 is designed to be fixed with the FPV goggles headband ring screw, and is completely non-destructively installed on the side of the DJI goggles, so that you can use Fat Shark or various third-party Fat Shark interface 5.8G receiver systems, Conveniently transfer video and audio signals to the high-quality screen of FPV flying glasses for viewing or recording2. Dimensions: 48 x 28 x 12mm3. Weight: 10g (excluding the adapter cable)4. Power input: 2S-4S (DC5.5 x 2.1)5. Internal voltage: 5V 3A (with pad for output)6. Power output: 2S-4S (DC5.5 x 2.1)7. Signal input: Standard Fat Shark receiver port8. Including third-party receivers: Reaxacc Furious, etc.9. Signal output: standard audio/videoappendix: Adapter mounting block and screw x 1Audio and video cable x 1Power cable x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 26.50kgs / 58.42lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs 40HQ: 727 cartons * 500 pcs = 363500 pcs

Read more less

1. Material: Plastic 2. Quick-release, the same design as the original propeller 3. Easy to mount, secure, durable, and well-balanced propellers. 4. The shape is small, exquisite, lightweight and easy to fly 5. List: 2 x propellers Note: The drone and other accessories are not included, for reference onlySpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 20cm * 15cm * 1cm / 7.87inch * 5.91inch * 0.39inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

1. Aluminum alloy material, sturdy and durable 2. Process: Anodizing and coloring process to use 3. Ergonomic design, knurled anti-slip, comfortable 4. Stored in the remote control like the original joystick 5. Design for DJI FPV, quick disassembly and easy installation 6. Size: 2.4x0.9x0.9cm 7. Weight: 4.7gSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 6cm * 3cm / 2.36inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 32cm * 35cm * 25cm / 12.6inch * 13.78inch * 9.84inch Loading Container 20GP: 952 cartons * 200 pcs = 190400 pcs 40HQ: 2210 cartons * 200 pcs = 442000 pcs

Read more less

1. It adopts nylon and mesh cloth material, which is not easy to draw, and feels good 2. It can be stored when not in use, easy to carry 3. Length adjustment buckle, adjustable length, 61.5-81cm can change as you like 4. Metal hanging buckle, strong, stable and safe 5. Lightweight and portable, easy to carry 6. Weight: 65.2gSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 24cm * 17cm * 2cm / 9.45inch * 6.69inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 200 pcs = 48600 pcs 40HQ: 566 cartons * 200 pcs = 113200 pcs

Read more less

1. The bracket is designed for DJI FPV Goggles V2 battery, fix the battery well and is installed on the headband of goggles. 2. This clip of Battery can be fixed on the headband of goggles V2, good way to charge your goggles and increase your playing time if you have another charging cable and battery as backup. 3. This bracket is ultra portable, easy to install and uninstall, will give you better flying experience. 4. Made of plastic material, durable to use 5. Small size, light weight, easy to carrySpecification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 33cm * 42cm / 20.47inch * 12.99inch * 16.54inch Loading Container 20GP: 370 cartons * 200 pcs = 74000 pcs 40HQ: 858 cartons * 200 pcs = 171600 pcs

Read more less

1. Aluminum alloy material, sturdy and durable 2. Process: Anodizing and coloring process to use 3. Ergonomic design, knurled anti-slip, comfortable 4. Stored in the remote control like the original joystick 5. Design for DJI FPV, quick disassembly and easy installationSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 500 Carton Weight 6.00kgs / 13.23lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 500 pcs = 310000 pcs 40HQ: 1439 cartons * 500 pcs = 719500 pcs

Read more less

1. Made Of High-density PC. Double EVA sponge and hardshell secures everything in place, protects against scratches, jostles and drops. 2. The PC hard shell is used in the front, and the water-repellent nylon cloth is used in the back. If you encounter heavy rain in the wild, you do not worry about the drone get wet.great perfectly to protection your UAV does not suffer any damage . 3. Shock absorption and compression resistance, effectively protect your equipment from normal scratches, dirt, tears and wear 4. Large capacity: Can additional store 2pcs of battery (1pc on drone body) + RC drone + remote controller + Goggles V2 + charger + Cables + Propellers 5. Ideal for travel or home storage, built in carry handle and comfortable shoulder strap to keep your drone secure Multiple storage compartments and an attractive design. Keep your drone and accessories organized, safe from scratches and dust. Water resistant protects from short-term exposure to water and extreme weather phenomena. 6. Size: 46x14x34cm 7. Weight: 1.65kgSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 2.10kgs / 4.63lb One Package Size 48cm * 37cm * 18cm / 18.9inch * 14.57inch * 7.09inch Qty per Carton 4 Carton Weight 9.00kgs / 19.84lb Carton Size 75cm * 48cm * 37cm / 29.53inch * 18.9inch * 14.57inch Loading Container 20GP: 200 cartons * 4 pcs = 800 pcs 40HQ: 464 cartons * 4 pcs = 1856 pcs

Read more less

1. Allow users to wear the FPV Goggles V2 without myopia glasses and eliminates any discomfort. 2. Comfortable even for those who ordinarily wear myopia glasses. 3. Choose the corrective lenses according to your degree of myopia. 4. Aspherical resin lens: Thinner and more translucent than spherical lens, the vision is lifelike, and the visual effect is more comfortable. 5. High-quality professional lenses: Aspheric lenses can reduce aberrations and distortions, and have a clearer and wider field of view. 6. Frame card design: It does not affect the adjustment of the interpupillary distance at all, and the left and right sides can be adjusted without hindrance. 7. The thickness of the frame is only 5mm, so you do not contact your nose and face, and also not block some light.Specification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

1. It adopts nylon material, which is not easy to draw, and feels good 2. It can be stored when not in use, easy to carry 3. Length adjustment buckle, adjustable length, 36.5-62cm can change as you like 4. Metal hanging buckle, strong, stable and safe 5. Lightweight and portable, easy to carry 6. Weight: 29.1gSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 24cm * 17cm * 2cm / 9.45inch * 6.69inch * 0.79inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 200 pcs = 48600 pcs 40HQ: 566 cartons * 200 pcs = 113200 pcs

Read more less

1. Choose corrective lenses according to your myopia2. The aspherical resin lens is thinner and more translucent than the spherical lens, the vision is lifelike, and the visual effect is more comfortable3. Aspherical lens can reduce aberration and distortion, and the field of view is clearer and wider4. Frame card position design: does not affect the adjustment of the interpupillary distance at all, and can be adjusted without hindrance5. The thickness of the frame is only 5mm, so you don’t touch your nose or face6. Material: Plastic frame + resin lens7. Net weight: 4g (one pair)Specification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 6cm * 2.5cm / 3.94inch * 2.36inch * 0.98inch Qty per Carton 200 Carton Weight 10.40kgs / 22.93lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 200 pcs = 146800 pcs 40HQ: 1705 cartons * 200 pcs = 341000 pcs

Read more less

Features:1. Ergonomic Portability: Lightweight design provides a comfortable grip for extended training sessions, simulator practice and travel.2. 10-Channel Customization: Two additional tactile switches expand the output to 10 channels, providing flexible control options for drones, robots, drone soccer and fixed-wing aircraft.3. 5D Trim Adjustments: Two dedicated trim switches allow pilots to fine-tune joystick offsets during flight for precise control and quick balancing.4. Advanced Gimbal Sensor: The gimbal features an anti-wear coating for smooth and precise stick movement with improved durability.5. Wireless Simulator Support: Bluetooth joystick mode enables wireless connection to FPV simulators on compatible PCs, mobile devices and tablets.6. Fast Charging Battery: Built-in 1S 2000mAh LiPo battery provides up to 8 hours of runtime at 25mW and supports 15W fast charging, reaching a full charge in approximately 40 minutes.7. Low-Latency Radio Control: Equipped with BETAFPV radio transmission technology and ExpressLRS 2.4G for responsive and reliable control.Specifications:1. Item: LiteRadio 4 Radio Transmitter2. Channels: 103. Color: Gray 4. Gimbal: Potentiometer (Standard Version), Hall Sensor (Twilight Limited Edition)5. RF System: ExpressLRS 2.4G6. RF Output Power: 25mW / 50mW / 100mW (Adjustable)7. Simulator Connection: Bluetooth and USB-C Cable8. Supported Simulators: Most Compatible Simulators and DJI Virtual Flight9. Port: USB-C, Data Transfer and Charging10. Charging Power: 5V, Max. 3A11. Battery: Built-in 1S 2000mAh LiPo Battery12. Battery Life: 4-5 Hours at 100mW or Up to 8 Hours at 25mW13. Weight: Approximately 210g14. Dimensions: 172.5 x 118.5 x 72.5mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 10cm * 1.5cm / 5.91inch * 3.94inch * 0.59inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 200 pcs = 64000 pcs 40HQ: 744 cartons * 200 pcs = 148800 pcs

Read more less

Features:1. Lightweight and Agile: With a 45mm diameter and 1.8-inch pitch, each propeller weighs only 0.32g, helping reduce rotational inertia for faster throttle response and agile flight performance.2. Precision-Balanced Tri-Blade Design: The three-blade configuration is designed for smooth and stable rotation, helping reduce vibration and improve overall flight efficiency.3. Durable PC Material: Made from durable PC material with good impact resistance, providing reliable performance during FPV flying and everyday use.4. Optimized for Meteor75 Pro: Designed to pair with 1102 Freestyle Motors (2026), providing a suitable propulsion solution for the Meteor75 Pro FPV drone.5. Two Color Options: Available in white and transparent gray to match different FPV drone builds and styling preferences.Specifications:1. Item: Gemfan 1811 3-Blade Propellers (1.5mm Shaft)2. Material: PC3. Propeller Pitch: 1.8 inch4. Propeller Diameter: 45mm5. Center Thickness: 4.4mm6. Maximum Propeller Width: 8.7mm7. Center Hole Inner Diameter: 1.5mm8. Weight: 0.32g/pc9. Recommended Takeoff Weight: 100g10. Blade Type: 3-Blade11. Colors: White / Transparent GraySpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 11cm * 3cm / 5.91inch * 4.33inch * 1.18inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

Features:1. Lightweight and Agile: With a 45mm diameter and 1.8-inch pitch, each propeller weighs only 0.32g, helping reduce rotational inertia for faster throttle response and agile flight performance.2. Precision-Balanced Tri-Blade Design: The three-blade configuration is designed for smooth and stable rotation, helping reduce vibration and improve overall flight efficiency.3. Durable PC Material: Made from durable PC material with good impact resistance, providing reliable performance during FPV flying and everyday use.4. Optimized for Meteor75 Pro: Designed to pair with 1102 Freestyle Motors (2026), providing a suitable propulsion solution for the Meteor75 Pro FPV drone.5. Two Color Options: Available in white and transparent gray to match different FPV drone builds and styling preferences.Specifications:1. Item: Gemfan 1811 3-Blade Propellers (1.5mm Shaft)2. Material: PC3. Propeller Pitch: 1.8 inch4. Propeller Diameter: 45mm5. Center Thickness: 4.4mm6. Maximum Propeller Width: 8.7mm7. Center Hole Inner Diameter: 1.5mm8. Weight: 0.32g/pc9. Recommended Takeoff Weight: 100g10. Blade Type: 3-Blade11. Colors: White / Transparent GraySpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 11cm * 3cm / 5.91inch * 4.33inch * 1.18inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

Features:1. ArtLynk Protocol: Uses the low-latency ArtLynk communication protocol to provide stable, long-range digital video transmission with improved performance compared with traditional analog VTX systems.2. Lightweight HD VTX: The compact air unit weighs approximately 3.61g without the camera and approximately 6.5g with the camera, providing a lightweight and cost-effective HD video transmission solution for FPV drones.3. Reliable Video Transmission: Supports a video transmission range of over 5km with approximately 60ms latency, providing smooth and responsive live video for FPV flight.4. Wide-Angle 1080p Video: Equipped with a 1/2.9-inch CMOS image sensor and a 170-degree FOV lens, supporting 1080p video at 60fps for a wide and immersive live view.5. Plug-and-Play Connection: Features a standard SH 1.0 6-pin FC port for convenient connection with compatible Betaflight and BETAFPV flight controllers, plus a 4-pin USB port for configuration and firmware updates.Specifications:1. Product Type: ArtLynk HD Air Unit2. Air Unit Weight: Approximately 3.61g (Camera Excluded), Approximately 6.5g (Camera Included)3. Antenna Weight: Approximately 0.44g4. Air Unit Dimensions: 30 x 30 x 5.5mm5. Camera Dimensions: 14 x 14 x 17mm6. Mounting Hole Size: 25.5 x 25.5mm7. Mounting Hole Diameter: 2.5mm8. Air Unit Ports: SH 1.0 6-pin (FC), SH 1.0 4-pin (USB)9. VTX Frequency: 5.1-5.9GHz10. EIRP: Less than 200mW (FCC/SRRC), Less than 25mW (CE)11. Video Transmission Range: Greater than 5km12. Video Transmission Latency: Approximately 60ms13. Live View Quality: 1080p at 60fps14. Bandwidth: 10MHz15. Antenna: Single Antenna16. Channels: 317. Camera Mounting Width: 14mm18. Camera Mounting Hole: M219. Image Sensor: 1/2.9-inch CMOS20. Lens FOV: 170 degrees21. Video Format: MP422. Maximum Video Transmission Bitrate: 20Mbps23. OSD: Canvas Mode24. Input Voltage: 5V25. Operating Temperature: -10C to 40CSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 40 Carton Weight 5.80kgs / 12.79lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 40 pcs = 12800 pcs 40HQ: 744 cartons * 40 pcs = 29760 pcs

Read more less

Features:1. Ergonomic Portability: Lightweight design provides a comfortable grip for extended training sessions, simulator practice and travel.2. 10-Channel Customization: Two additional tactile switches expand the output to 10 channels, providing flexible control options for drones, robots, drone soccer and fixed-wing aircraft.3. 5D Trim Adjustments: Two dedicated trim switches allow pilots to fine-tune joystick offsets during flight for precise control and quick balancing.4. Advanced Gimbal Sensor: The gimbal features an anti-wear coating for smooth and precise stick movement with improved durability.5. Wireless Simulator Support: Bluetooth joystick mode enables wireless connection to FPV simulators on compatible PCs, mobile devices and tablets.6. Fast Charging Battery: Built-in 1S 2000mAh LiPo battery provides up to 8 hours of runtime at 25mW and supports 15W fast charging, reaching a full charge in approximately 40 minutes.7. Low-Latency Radio Control: Equipped with BETAFPV radio transmission technology and ExpressLRS 2.4G for responsive and reliable control.Specifications:1. Item: LiteRadio 4 Radio Transmitter2. Channels: 103. Color: Gray 4. Gimbal: Potentiometer (Standard Version), Hall Sensor (Twilight Limited Edition)5. RF System: ExpressLRS 2.4G6. RF Output Power: 25mW / 50mW / 100mW (Adjustable)7. Simulator Connection: Bluetooth and USB-C Cable8. Supported Simulators: Most Compatible Simulators and DJI Virtual Flight9. Port: USB-C, Data Transfer and Charging10. Charging Power: 5V, Max. 3A11. Battery: Built-in 1S 2000mAh LiPo Battery12. Battery Life: 4-5 Hours at 100mW or Up to 8 Hours at 25mW13. Weight: Approximately 210g14. Dimensions: 172.5 x 118.5 x 72.5mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 10cm * 1.5cm / 5.91inch * 3.94inch * 0.59inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 200 pcs = 64000 pcs 40HQ: 744 cartons * 200 pcs = 148800 pcs

Read more less

Features:1. Lightweight and Agile: With a 45mm diameter and 1.8-inch pitch, each propeller weighs only 0.32g, helping reduce rotational inertia for faster throttle response and agile flight performance.2. Precision-Balanced Tri-Blade Design: The three-blade configuration is designed for smooth and stable rotation, helping reduce vibration and improve overall flight efficiency.3. Durable PC Material: Made from durable PC material with good impact resistance, providing reliable performance during FPV flying and everyday use.4. Optimized for Meteor75 Pro: Designed to pair with 1102 Freestyle Motors (2026), providing a suitable propulsion solution for the Meteor75 Pro FPV drone.5. Two Color Options: Available in white and transparent gray to match different FPV drone builds and styling preferences.Specifications:1. Item: Gemfan 1811 3-Blade Propellers (1.5mm Shaft)2. Material: PC3. Propeller Pitch: 1.8 inch4. Propeller Diameter: 45mm5. Center Thickness: 4.4mm6. Maximum Propeller Width: 8.7mm7. Center Hole Inner Diameter: 1.5mm8. Weight: 0.32g/pc9. Recommended Takeoff Weight: 100g10. Blade Type: 3-Blade11. Colors: White / Transparent GraySpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 11cm * 3cm / 5.91inch * 4.33inch * 1.18inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs 40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

Product Features:1. Ultra?Light & Compact: Weighs only 2.74g, minimising added weight on micro builds without compromising durability or performance.2. High?Definition Imaging: 1200TVL resolution paired with a 1/3 inch CMOS sensor delivers crisp, clear imagery.3. Wide 160 degree Field of View: Captures expansive, immersive scenes, perfect for close?quarters racing and freestyle exploration.4. Direct Compatibility: Seamlessly replaces the Aquila 20 Analog camera, and fits any whoop frame with a 14mm camera mount, making it a versatile spare for quick field repairs and reduced downtime.Specifications1. Item: C04 FPV Camera2. Image Sensor: 1/3 inch CMOS Sensor3. Horizontal Resolution: 1200TVL4. FOV: 160 Degrees5. Video System: NTSC (4:3)6. Supply Voltage: 5V7. Size: 14.3 x 14 x 19mm8. Weight: 2.74gSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 40 Carton Weight 4.50kgs / 9.92lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 40 pcs = 12800 pcs 40HQ: 744 cartons * 40 pcs = 29760 pcs

Read more less

Features:1. Lightweight PP Frame: Made of PP material with a net weight of approximately 7.73g, helping reduce the overall weight of the FPV quadcopter.2. 80.8mm Wheelbase: Compact 75mm-class frame design with an 80.8mm wheelbase, suitable for lightweight FPV builds and indoor or outdoor flying.3. Cross-Type Flight Controller Mounting: Features 26 x 26mm flight controller mounting holes for cross-shaped flight controllers. The mounting pattern may not be compatible with standard whoop-style flight controllers.4. Motor Compatibility: Designed with 3-M1.4-6.6mm motor mounting holes and recommended for use with 1102 or 0802 brushless motors.5. Propeller Compatibility: Recommended for use with Qianfeng 45mm tri-blade propellers or Qianfeng 45mm bi-blade propellers.6. Compatible Flight Controller: Designed to work with the F41S 5A brushless flight controller for a suitable Meteor75 Pro FPV setup.7. Compatible Canopies: Compatible with the Micro Canopy 2022 version, Micro digital transmission canopy and Micro lightweight digital transmission canopy.Specification:1. Product Name: Meteor75 Pro Frame2. Material: PP3. Weight: Approximately 7.73g4. Wheelbase: 80.8mm5. Flight Controller Mounting: 26 x 26mm6. Flight Controller Mounting Type: Cross-shaped7. Motor Mounting Holes: 3-M1.4-6.6mm8. Recommended Motors: 1102, 0802 brushless motors9. Recommended Propellers: Qianfeng 45mm tri-blade propellers, Qianfeng 45mm bi-blade propellers10. Compatible Flight Controller: F41S 5A brushless flight controller11. Compatible Canopies: Micro Canopy 2022 version, Micro digital transmission canopy, Micro lightweight digital transmission canopySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 15cm * 12cm / 7.87inch * 5.91inch * 4.72inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

Features:1. Lightweight PP Frame: Made of PP material with a net weight of approximately 7.73g, helping reduce the overall weight of the FPV quadcopter.2. 80.8mm Wheelbase: Compact 75mm-class frame design with an 80.8mm wheelbase, suitable for lightweight FPV builds and indoor or outdoor flying.3. Cross-Type Flight Controller Mounting: Features 26 x 26mm flight controller mounting holes for cross-shaped flight controllers. The mounting pattern may not be compatible with standard whoop-style flight controllers.4. Motor Compatibility: Designed with 3-M1.4-6.6mm motor mounting holes and recommended for use with 1102 or 0802 brushless motors.5. Propeller Compatibility: Recommended for use with Qianfeng 45mm tri-blade propellers or Qianfeng 45mm bi-blade propellers.6. Compatible Flight Controller: Designed to work with the F41S 5A brushless flight controller for a suitable Meteor75 Pro FPV setup.7. Compatible Canopies: Compatible with the Micro Canopy 2022 version, Micro digital transmission canopy and Micro lightweight digital transmission canopy.Specification:1. Product Name: Meteor75 Pro Frame2. Material: PP3. Weight: Approximately 7.73g4. Wheelbase: 80.8mm5. Flight Controller Mounting: 26 x 26mm6. Flight Controller Mounting Type: Cross-shaped7. Motor Mounting Holes: 3-M1.4-6.6mm8. Recommended Motors: 1102, 0802 brushless motors9. Recommended Propellers: Qianfeng 45mm tri-blade propellers, Qianfeng 45mm bi-blade propellers10. Compatible Flight Controller: F41S 5A brushless flight controller11. Compatible Canopies: Micro Canopy 2022 version, Micro digital transmission canopy, Micro lightweight digital transmission canopySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 15cm * 12cm / 7.87inch * 5.91inch * 4.72inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

Features:1. Lightweight PP Frame: Made of PP material with a net weight of approximately 7.73g, helping reduce the overall weight of the FPV quadcopter.2. 80.8mm Wheelbase: Compact 75mm-class frame design with an 80.8mm wheelbase, suitable for lightweight FPV builds and indoor or outdoor flying.3. Cross-Type Flight Controller Mounting: Features 26 x 26mm flight controller mounting holes for cross-shaped flight controllers. The mounting pattern may not be compatible with standard whoop-style flight controllers.4. Motor Compatibility: Designed with 3-M1.4-6.6mm motor mounting holes and recommended for use with 1102 or 0802 brushless motors.5. Propeller Compatibility: Recommended for use with Qianfeng 45mm tri-blade propellers or Qianfeng 45mm bi-blade propellers.6. Compatible Flight Controller: Designed to work with the F41S 5A brushless flight controller for a suitable Meteor75 Pro FPV setup.7. Compatible Canopies: Compatible with the Micro Canopy 2022 version, Micro digital transmission canopy and Micro lightweight digital transmission canopy.Specification:1. Product Name: Meteor75 Pro Frame2. Material: PP3. Weight: Approximately 7.73g4. Wheelbase: 80.8mm5. Flight Controller Mounting: 26 x 26mm6. Flight Controller Mounting Type: Cross-shaped7. Motor Mounting Holes: 3-M1.4-6.6mm8. Recommended Motors: 1102, 0802 brushless motors9. Recommended Propellers: Qianfeng 45mm tri-blade propellers, Qianfeng 45mm bi-blade propellers10. Compatible Flight Controller: F41S 5A brushless flight controller11. Compatible Canopies: Micro Canopy 2022 version, Micro digital transmission canopy, Micro lightweight digital transmission canopySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 15cm * 12cm / 7.87inch * 5.91inch * 4.72inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

Features:1. Lightweight PP Frame: Made of PP material with a net weight of approximately 7.73g, helping reduce the overall weight of the FPV quadcopter.2. 80.8mm Wheelbase: Compact 75mm-class frame design with an 80.8mm wheelbase, suitable for lightweight FPV builds and indoor or outdoor flying.3. Cross-Type Flight Controller Mounting: Features 26 x 26mm flight controller mounting holes for cross-shaped flight controllers. The mounting pattern may not be compatible with standard whoop-style flight controllers.4. Motor Compatibility: Designed with 3-M1.4-6.6mm motor mounting holes and recommended for use with 1102 or 0802 brushless motors.5. Propeller Compatibility: Recommended for use with Qianfeng 45mm tri-blade propellers or Qianfeng 45mm bi-blade propellers.6. Compatible Flight Controller: Designed to work with the F41S 5A brushless flight controller for a suitable Meteor75 Pro FPV setup.7. Compatible Canopies: Compatible with the Micro Canopy 2022 version, Micro digital transmission canopy and Micro lightweight digital transmission canopy.Specification:1. Product Name: Meteor75 Pro Frame2. Material: PP3. Weight: Approximately 7.73g4. Wheelbase: 80.8mm5. Flight Controller Mounting: 26 x 26mm6. Flight Controller Mounting Type: Cross-shaped7. Motor Mounting Holes: 3-M1.4-6.6mm8. Recommended Motors: 1102, 0802 brushless motors9. Recommended Propellers: Qianfeng 45mm tri-blade propellers, Qianfeng 45mm bi-blade propellers10. Compatible Flight Controller: F41S 5A brushless flight controller11. Compatible Canopies: Micro Canopy 2022 version, Micro digital transmission canopy, Micro lightweight digital transmission canopySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 15cm * 12cm / 7.87inch * 5.91inch * 4.72inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

Features1. High-Power Transmission (Up to 1W): ELRS RF module with a maximum output of 1W (2.4GHz version) and adjustable power levels, ensuring stable, long-range control for FPV drones.2. OLED Display & 5D Navigation Button: Features an onboard OLED screen and a 5-way navigation button for direct configuration of transmit power, refresh rate, telemetry ratio, RGB lighting, binding, and firmware updates, allowing for intuitive parameter adjustment.3. Dual External Power Options (XT30 and Type-C): Supports 5–12V external input (2S LiPo recommended); do not use 3S or higher voltage batteries to avoid equipment damage. Designed to meet the demands of extended outdoor operation.4. Automatic Cooling Fan: The fan activates automatically when output power exceeds 250mW. The 1W version includes a built-in heatsink to dissipate heat rapidly during high-power operation, preventing overheating and ensuring consistent performance.5. Broad Transmitter Compatibility: Uses the standard Micro JR interface and is compatible with OpenTX systems as well as transmitters such as the Futaba T16IZ, T16SZ, T18SZ, and ET16. Transmitters without a JR bay can connect via GND/VCC/CRSF wiring; compatible with the vast majority of ELRS receivers on the market.Specification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 15cm * 12cm * 12cm / 5.91inch * 4.72inch * 4.72inch Qty per Carton 20 Carton Weight 2.50kgs / 5.51lb Carton Size 45cm * 37cm * 34cm / 17.72inch * 14.57inch * 13.39inch Loading Container 20GP: 471 cartons * 20 pcs = 9420 pcs 40HQ: 1093 cartons * 20 pcs = 21860 pcs

Read more less

Features1. Ultra-light and Compact: Weighs only 4.2g with dimensions of 19×32×6mm; its compact size allows it to fit into the fuselages of most RC models, while the plug-and-play design ensures quick and easy installation.2. ELRS 2.4G Protocol: Supports ExpressLRS 2.4G and 5-channel PWM output; switchable to CRSF signal mode, delivering a low-latency, long-range, and stable control link.3. Multi-Model Compatibility: Suitable for fixed-wing aircraft, helicopters, RC boats, and RC cars, bringing the high performance of the ELRS system to traditional RC models.4. Practical Hardware Design: Features an IPEX MHF antenna connector, status indicator LED, and firmware update button; clearly defined pinouts simplify wiring and firmware upgrades.5. Comprehensive Accessory Kit: Includes the receiver, antenna, and double-sided tape, allowing for quick assembly and immediate use right out of the box.Specifications1. Antenna: IPEX MHF + T-style antenna2. MCU: ESP8285/SX1280/SX12813. Power: 12.5dBm/17mW4. Firmware Version: ExpressLRS V2.05. Dimensions: 19mm x 32mm x 6mm6. Weight: 4.2g7. Number of Channels: 5CH8. Operating Voltage: +5V–9V DC9. Receiver Protocol: Switchable (PWM/CRSF)10. Frequency Band: 2.4GHzSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 3cm * 4cm * 8cm / 1.18inch * 1.57inch * 3.15inch Qty per Carton 40 Carton Weight 1.00kgs / 2.20lb Carton Size 36cm * 20cm * 25cm / 14.17inch * 7.87inch * 9.84inch Loading Container 20GP: 1481 cartons * 40 pcs = 59240 pcs 40HQ: 3439 cartons * 40 pcs = 137560 pcs

Read more less

Features1. Direct-solder coaxial cable process for stable signal: The coaxial feeder is soldered directly to the antenna body, eliminating signal loss caused by connectors; this ensures more stable remote control transmission and reduces contact-related failures during long-term use.2. High-gain omnidirectional loop design: Features a loop-style omnidirectional antenna with 2.3dBi gain, providing excellent signal gain in all directions, wider coverage, and effectively increased transmission range.3. Standard SMA male connector: Gold-plated SMA male connector compatible with 2.4G and 868-915M remote control transmitters and RF modules; highly versatile and compatible with the vast majority of ELRS remote control systems.4. Lightweight, reinforced injection-molded structure: Lightweight loop design adds no extra load; the solder joint is reinforced with injection molding for resistance to bending and vibration, ensuring durability and reliability for outdoor flight.5. Optimized dimensions and dual-frequency options: Dimensions optimized for remote control installation; available in 2.4G and 868-915M frequency specifications, suitable for FPV drones, fixed-wing aircraft, and other RC equipment.Specifications1. Coaxial cable length: 65mm (2.4G) / 90mm (868M / 915M)2. Connector type: SMA Male (internal thread, internal pin)3. Gain: 2.3dBi (2.4G) / 2.3dBi (868M / 915M)4. VSWR: less than1.5 (2.4G) / less than2.0 (868M / 915M)5. Polarization type: Linear polarization6. Compatible transmitters: Remote controllers or RF modules with 2.4GHz/915MHz/868MHz transmission frequencies.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 20 Carton Weight 1.20kgs / 2.65lb Carton Size 42cm * 35cm * 40cm / 16.54inch * 13.78inch * 15.75inch Loading Container 20GP: 453 cartons * 20 pcs = 9060 pcs 40HQ: 1052 cartons * 20 pcs = 21040 pcs

Read more less

Features1. Next-Generation 1/4.5-inch CMOS Sensor: Equipped with a new-generation 1/4.5-inch CMOS sensor that integrates light sensing and image processing. It delivers true-to-life, accurate colors and lower power consumption—reducing heat generation—to ensure outstanding image quality.2. 173-degree Ultra-Wide-Angle High-Transmittance Glass Lens: Features a scratch-resistant, high-transmittance glass lens with a 173-degree racing-grade field of view, providing an expansive perspective and stable, clear imagery.3. Ultra-Light, Compact Mini Body: Its lightweight, mini design adds negligible weight, preserving the maneuverability of aircraft. It is ideal for small FPV drones, offering agile flight control.4. Dual Aspect Ratios for Diverse Flight Scenarios: Supports both 16:9 and 4:3 aspect ratios. The 16:9 mode offers a 173-degree ultra-wide angle for easier flight path anticipation, while the 4:3 mode is compatible with traditional FPV goggles, catering to needs ranging from micro-drone racing and freestyle flying to beginner practice.5. Durable Design for Broad Application: The scratch-resistant lens ensures a long service life. It is suitable for micro FPV racing, freestyle, and beginner flying, and is compatible with a wide range of small FPV drone models.Product Specifications1. Image Sensor: 1/4.5 英寸 CMOS2. FOV: 173-degree (16:9) / 141-degree (4:3)3. Video Format: NTSC (16:9 / 4:3)4. Resolution: 600TVL5. Signal-to-Noise Ratio: 40.59dB6. Electronic Shutter Speed: Auto7. Voltage: DC 5-12V8. Automatic Gain Control: Auto9. Current: 60mA / 5V10. Camera Dimensions: 11 x 13 x 12.5mm; Lens Outer Diameter: 10mm11. Connector: JST-0.8mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 30 Carton Weight 3.00kgs / 6.61lb Carton Size 44cm * 32cm * 36cm / 17.32inch * 12.6inch * 14.17inch Loading Container 20GP: 526 cartons * 30 pcs = 15780 pcs 40HQ: 1221 cartons * 30 pcs = 36630 pcs

Read more less

Features1. Compact Plug-and-Play Design: Weighing only 15.5g with a finely crafted casing, it fits easily into most model airframes. Features a Type-C port for convenient use—no external ELRS flashing tool required.2. TCXO Temperature-Compensated Crystal Oscillator: Offers high frequency precision and stable performance across a wide temperature range, preventing signal loss during extended flights.3. 14-Channel PWM Output and High Compatibility: Supports 14 PWM channels; compatible with fixed-wing aircraft, helicopters, RC cars, and RC boats. Supports the ELRS protocol and works with a wide variety of RC models.4. 1–6S Voltage Telemetry and External Barometer Support: Supports real-time 1–6S battery voltage telemetry to enhance flight safety; allows for an external barometer module to provide flight altitude data.5. ELRS 2.4GHz Diversity Receiver: Features dual-antenna omnidirectional reception for stable, interference-resistant signals. Delivers long-range control, low latency, and high refresh rates—ideal for long-range missions and flights in complex environments.Specifications1. Antenna: 2 x 150mm coaxial antennas2. Channels: 14 PWM channels3. Output Protocol: PWM/CRSF/SBUS4. Input Voltage: 3.5V–8.4V DC5. Rated Current: 180mA 5V / 140mA 5V6. Voltage Detection Range: 1–6S7. Firmware Version: ExpressLRS V3.3.08. Compatible Models: Multirotors, fixed-wing aircraft, helicopters, RC cars, RC boats, etc.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 3.5cm * 2cm / 1.97inch * 1.38inch * 0.79inch Qty per Carton 30 Carton Weight 1.00kgs / 2.20lb Carton Size 35cm * 28cm * 20cm / 13.78inch * 11.02inch * 7.87inch Loading Container 20GP: 1360 cartons * 30 pcs = 40800 pcs 40HQ: 3158 cartons * 30 pcs = 94740 pcs

Read more less

Features1. Compact Plug-and-Play Design: Weighing only 15.5g with a finely crafted casing, it fits easily into most model airframes. Features a Type-C port for convenient use—no external ELRS flashing tool required.2. TCXO Temperature-Compensated Crystal Oscillator: Offers high frequency precision and stable performance across a wide temperature range, preventing signal loss during extended flights.3. 14-Channel PWM Output and High Compatibility: Supports 14 PWM channels; compatible with fixed-wing aircraft, helicopters, RC cars, and RC boats. Supports the ELRS protocol and works with a wide variety of RC models.4. 1–6S Voltage Telemetry and External Barometer Support: Supports real-time 1–6S battery voltage telemetry to enhance flight safety; allows for an external barometer module to provide flight altitude data.5. ELRS 2.4GHz Diversity Receiver: Features dual-antenna omnidirectional reception for stable, interference-resistant signals. Delivers long-range control, low latency, and high refresh rates—ideal for long-range missions and flights in complex environments.Specifications1. Antenna: 2 x 150mm coaxial antennas2. Channels: 14 PWM channels3. Output Protocol: PWM/CRSF/SBUS4. Input Voltage: 3.5V–8.4V DC5. Rated Current: 180mA 5V / 140mA 5V6. Voltage Detection Range: 1–6S7. Firmware Version: ExpressLRS V3.3.08. Compatible Models: Multirotors, fixed-wing aircraft, helicopters, RC cars, RC boats, etc.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 3.5cm * 2cm / 1.97inch * 1.38inch * 0.79inch Qty per Carton 30 Carton Weight 1.00kgs / 2.20lb Carton Size 35cm * 28cm * 20cm / 13.78inch * 11.02inch * 7.87inch Loading Container 20GP: 1360 cartons * 30 pcs = 40800 pcs 40HQ: 3158 cartons * 30 pcs = 94740 pcs

Read more less

Features1. Moxon V2 High-Gain Directional Antenna: An upgraded Moxon directional antenna offering a forward gain of up to 5.5dBi. It significantly extends transmission range and improves signal quality for long-range RC flight and FPV operations.2. Direct-Soldered Coaxial Cable for Reduced Signal Loss: The coaxial feeder is soldered directly to the antenna body, minimizing signal loss caused by connectors and ensuring a stable, reliable signal during extended outdoor flights.3. Standard SMA Male Connector for Broad Compatibility: Features a gold-plated SMA male connector compatible with 2.4GHz and 915MHz transmitters and RF modules. It supports mainstream ELRS systems and fits the vast majority of remote controllers.4. Lightweight, Reinforced Injection-Molded Structure: Lightweight design adds no significant load; the solder joints are protected by injection molding, offering resistance to vibration and repeated bending for enhanced durability.5. Dual-Band Options and Easy Installation: Available in 2.4GHz and 915MHz versions with plug-and-play functionality; ideal for long-range FPV drones, fixed-wing aircraft, and various RC equipment.Specifications1. Coaxial Cable Length: 65mm (2.4GHz) / 90mm (868MHz/915MHz)2. Connector Type: SMA Male (Internal thread, internal pin)3. Gain: 5.4dBi (2.4GHz) / 5.9dBi (915MHz)4. VSWR: less than 2.0 (2.4GHz) / less than 2.0 (915MHz)5. Polarization: Linear Polarization6. Compatible Transmitters: Remote controllers or RF modules operating at 2.4GHz or 915MHzSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 15 Carton Weight 1.00kgs / 2.20lb Carton Size 35cm * 25cm * 32cm / 13.78inch * 9.84inch * 12.6inch Loading Container 20GP: 952 cartons * 15 pcs = 14280 pcs 40HQ: 2210 cartons * 15 pcs = 33150 pcs

Read more less

Features1. Moxon V2 High-Gain Directional Antenna: An upgraded Moxon directional antenna offering a forward gain of up to 5.5dBi. It significantly extends transmission range and improves signal quality for long-range RC flight and FPV operations.2. Direct-Soldered Coaxial Cable for Reduced Signal Loss: The coaxial feeder is soldered directly to the antenna body, minimizing signal loss caused by connectors and ensuring a stable, reliable signal during extended outdoor flights.3. Standard SMA Male Connector for Broad Compatibility: Features a gold-plated SMA male connector compatible with 2.4GHz and 915MHz transmitters and RF modules. It supports mainstream ELRS systems and fits the vast majority of remote controllers.4. Lightweight, Reinforced Injection-Molded Structure: Lightweight design adds no significant load; the solder joints are protected by injection molding, offering resistance to vibration and repeated bending for enhanced durability.5. Dual-Band Options and Easy Installation: Available in 2.4GHz and 915MHz versions with plug-and-play functionality; ideal for long-range FPV drones, fixed-wing aircraft, and various RC equipment.Specifications1. Coaxial Cable Length: 65mm (2.4GHz) / 90mm (868MHz/915MHz)2. Connector Type: SMA Male (Internal thread, internal pin)3. Gain: 5.4dBi (2.4GHz) / 5.9dBi (915MHz)4. VSWR: less than 2.0 (2.4GHz) / less than 2.0 (915MHz)5. Polarization: Linear Polarization6. Compatible Transmitters: Remote controllers or RF modules operating at 2.4GHz or 915MHzSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 15cm * 10cm * 12cm / 5.91inch * 3.94inch * 4.72inch Qty per Carton 30 Carton Weight 2.00kgs / 4.41lb Carton Size 35cm * 25cm * 32cm / 13.78inch * 9.84inch * 12.6inch Loading Container 20GP: 952 cartons * 30 pcs = 28560 pcs 40HQ: 2210 cartons * 30 pcs = 66300 pcs

Read more less

1. Remote control channels: 8 channels 2. Transmit power: 100mW 3. Remote distance: about 1000 meters 4. Operating frequency band: 2400-2500ΜΗΖ 5. Battery capacity: 650mAh6. Charging interface: Type-C7. Charging cut-off voltage: 4.2V +/-0.02V 8. Low voltage alarm: 3.4V 9. Battery life: about 2.5H 10. Charging time: about 2H 11. Input: 5V 1A 12. Simulator function: support 13. Applicable models: fixed-wing, multi-rotor, glider, soccer drone, car, boat, etc. with ELRS protocol14. Compatible simulator software: for Liftoff, DRL, DCL, Al Drone Simulator, TRYP FPV, Uncrashed, Freerider, Velocidrone), FPVLOGIC, SkyDive, FPVWorldwide, FPV Battleground, Black Sheep. Battleground, Black Sheep15. Material: ABS16. Size: about 16.2 x 12 x 6.6cm17. Weight: about 155gFeatures:1. Seamless training with real aircraft/simulator2. Compatible with ELRS 2.4G and support firmware version 3.0-3.3.2 or above receivers (compatible with most receivers), support for 8-channel coordinated control (4 flight channels, 4 customized functions toggle channel)3. 100mW fixed transmit power, with 2.4G copper tube antenna, high gain 3.0dB, frequency range 2400-2500MHz, control distance up to 1km in unobstructed environment, easily meet the needs of most flight scenarios4. Ultra-light body, easy to store, convenient to carry around5. Aviation model level control assembly, equipped with composite damping system, real restoration from miniature traverser to professional racing machine dynamic feedback (30g-800g model real machine feel), 0.1 degree fine-tuning precision6. Power down to 15% trigger a buzzer alarm, the voltage drops to the lithium battery protection threshold of 3.3V automatically shut down, effectively preventing damage to the battery over-discharge, to protect the safety of equipment7. Built-in 650mAh lithium battery, can be directly connected to the computer with a USB cable, rechargeable treasure, or cell phone charging plug charging (Note: does not support fast charging for charging)8. Compatible with a variety of models, support for fixed-wing with ELRS protocol, multi-rotor, glider, soccer drones, cars, boats and so onRemote control pairing tutorial: 1. The airplane is powered on and plugged in 3 times, the remote control is in the power-on state, push the right rocker to the maximum travel upward, and at the same time, quickly toggle the reset position switch (SA) toggle 2 times (up and down is one time)2. When the blue indicator light flashes rapidly, it means that it enters the pairing mode3. When the pairing is successful, the blue indicator light will be on and the beeper will beep onceSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 9.70kgs / 21.38lb Carton Size 46cm * 36cm * 31cm / 18.11inch * 14.17inch * 12.2inch Loading Container 20GP: 519 cartons * 25 pcs = 12975 pcs 40HQ: 1205 cartons * 25 pcs = 30125 pcs

Read more less

1. Suitable for DRL/DCL/LIFTOFF/UNCRASHED/TryPFPV/Freerider/Black Sheep and other 16+ mainstream FPV simulator software2. Immersive flight experience, realistic reproduction of the real aircraft operation feel3. High-precision joystick, 1:1 restore the real driving control feeling4. Ergonomic and smooth design, close to the palm, holding ultra-comfortable 5. Lightweight and compact, a load and go, anytime and anywhere to play without worries6. Connected to the computer can be used, no driver, no need to set up7. 8 flight channels, computer/mobile phone universal8. Size: about 16 x 12 x 5cm9. Weight: about 162gCalibration tutorial:1. First push the left hand throttle to the highest point2. Press and hold the center switch button once, then press and hold the center switch button for 2 seconds3. At this time, the blue light in the center will flash rapidly, indicating that calibration is in progress, and the flashing light will change to a constant state, indicating that calibration is completeSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 8.00kgs / 17.64lb Carton Size 48cm * 38cm * 34cm / 18.9inch * 14.96inch * 13.39inch Loading Container 20GP: 429 cartons * 25 pcs = 10725 pcs 40HQ: 998 cartons * 25 pcs = 24950 pcs

Read more less

1. Remote control channels: 8 channels 2. Transmit power: 100mW 3. Remote distance: about 1000 meters 4. Operating frequency band: 2400-2500ΜΗΖ 5. Battery capacity: 650mAh6. Charging interface: Type-C7. Charging cut-off voltage: 4.2V +/-0.02V 8. Low voltage alarm: 3.4V 9. Battery life: about 2.5H 10. Charging time: about 2H 11. Input: 5V 1A 12. Simulator function: support 13. Applicable models: fixed-wing, multi-rotor, glider, soccer drone, car, boat, etc. with ELRS protocol14. Compatible simulator software: for Liftoff, DRL, DCL, Al Drone Simulator, TRYP FPV, Uncrashed, Freerider, Velocidrone), FPVLOGIC, SkyDive, FPVWorldwide, FPV Battleground, Black Sheep. Battleground, Black Sheep15. Material: ABS16. Size: about 16.2 x 12 x 6.6cm17. Weight: about 155gFeatures:1. Seamless training with real aircraft/simulator2. Compatible with ELRS 2.4G and support firmware version 3.0-3.3.2 or above receivers (compatible with most receivers), support for 8-channel coordinated control (4 flight channels, 4 customized functions toggle channel)3. 100mW fixed transmit power, with 2.4G copper tube antenna, high gain 3.0dB, frequency range 2400-2500MHz, control distance up to 1km in unobstructed environment, easily meet the needs of most flight scenarios4. Ultra-light body, easy to store, convenient to carry around5. Aviation model level control assembly, equipped with composite damping system, real restoration from miniature traverser to professional racing machine dynamic feedback (30g-800g model real machine feel), 0.1 degree fine-tuning precision6. Power down to 15% trigger a buzzer alarm, the voltage drops to the lithium battery protection threshold of 3.3V automatically shut down, effectively preventing damage to the battery over-discharge, to protect the safety of equipment7. Built-in 650mAh lithium battery, can be directly connected to the computer with a USB cable, rechargeable treasure, or cell phone charging plug charging (Note: does not support fast charging for charging)8. Compatible with a variety of models, support for fixed-wing with ELRS protocol, multi-rotor, glider, soccer drones, cars, boats and so onRemote control pairing tutorial: 1. The airplane is powered on and plugged in 3 times, the remote control is in the power-on state, push the right rocker to the maximum travel upward, and at the same time, quickly toggle the reset position switch (SA) toggle 2 times (up and down is one time)2. When the blue indicator light flashes rapidly, it means that it enters the pairing mode3. When the pairing is successful, the blue indicator light will be on and the beeper will beep onceSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 9.00kgs / 19.84lb Carton Size 46cm * 36cm * 31cm / 18.11inch * 14.17inch * 12.2inch Loading Container 20GP: 519 cartons * 25 pcs = 12975 pcs 40HQ: 1205 cartons * 25 pcs = 30125 pcs

Read more less

1. Suitable for DRL/DCL/LIFTOFF/UNCRASHED/TryPFPV/Freerider/Black Sheep and other 16+ mainstream FPV simulator software2. Immersive flight experience, realistic reproduction of the real aircraft operation feel3. High-precision joystick, 1:1 restore the real driving control feeling4. Ergonomic and smooth design, close to the palm, holding ultra-comfortable 5. Lightweight and compact, a load and go, anytime and anywhere to play without worries6. Connected to the computer can be used, no driver, no need to set up7. 8 flight channels, computer/mobile phone universal8. Size: about 16 x 12 x 5cm9. Weight: about 162gCalibration tutorial:1. First push the left hand throttle to the highest point2. Press and hold the center switch button once, then press and hold the center switch button for 2 seconds3. At this time, the blue light in the center will flash rapidly, indicating that calibration is in progress, and the flashing light will change to a constant state, indicating that calibration is completeSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 8.00kgs / 17.64lb Carton Size 48cm * 38cm * 34cm / 18.9inch * 14.96inch * 13.39inch Loading Container 20GP: 429 cartons * 25 pcs = 10725 pcs 40HQ: 998 cartons * 25 pcs = 24950 pcs

Read more less

1. Suitable for Liftoff, DRL, DCL, AI Drone Simulator, TRY P FPV, Uncrashed, Freerider, Velocidrone, FPV LOGIC, SkyDive, FPV Worldwide, FPV Battleground, Virtual Flight, Phoenix Simulator, AeroFly RC 10 and other mainstream simulators2. Immersive flight experience, realistically restore the feel of the real aircraft operation3. High-precision joystick, 1:1 reproduction of the real driving control feeling4. Ergonomic and smooth design, close to the palm of the hand, holding ultra-comfortable 5. Lightweight and compact, a load and go, anytime and anywhere to play without worries6. Portable plug and play, connect to computer via Type-C cable, and connect to mobile devices via OTG adapter7. High precision joystick, smooth and sensitive control, support 4 modes switching8. Size: about 16 x 12 x 5cm9. Weight: about 162gCalibration tutorial:1. Push the left hand throttle to the highest point first2. Press and hold the center switch button once, then press and hold the center switch button for 2 seconds3. At this time, the blue light in the center will flash rapidly, indicating that calibration is in progress, and the flashing light will change to a constant state, indicating that calibration is completeSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 8.00kgs / 17.64lb Carton Size 48cm * 38cm * 34cm / 18.9inch * 14.96inch * 13.39inch Loading Container 20GP: 429 cartons * 25 pcs = 10725 pcs 40HQ: 998 cartons * 25 pcs = 24950 pcs

Read more less

1. Suitable for Liftoff, DRL, DCL, AI Drone Simulator, TRY P FPV, Uncrashed, Freerider, Velocidrone, FPV LOGIC, SkyDive, FPV Worldwide, FPV Battleground, Virtual Flight, Phoenix Simulator, AeroFly RC 10 and other mainstream simulators2. Immersive flight experience, realistically restore the feel of the real aircraft operation3. High-precision joystick, 1:1 reproduction of the real driving control feeling4. Ergonomic and smooth design, close to the palm of the hand, holding ultra-comfortable 5. Lightweight and compact, a load and go, anytime and anywhere to play without worries6. Portable plug and play, connect to computer via Type-C cable, and connect to mobile devices via OTG adapter7. High precision joystick, smooth and sensitive control, support 4 modes switching8. Size: about 16 x 12 x 5cm9. Weight: about 162gCalibration tutorial:1. Push the left hand throttle to the highest point first2. Press and hold the center switch button once, then press and hold the center switch button for 2 seconds3. At this time, the blue light in the center will flash rapidly, indicating that calibration is in progress, and the flashing light will change to a constant state, indicating that calibration is completeSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 16cm * 7cm / 8.27inch * 6.3inch * 2.76inch Qty per Carton 25 Carton Weight 8.00kgs / 17.64lb Carton Size 48cm * 38cm * 34cm / 18.9inch * 14.96inch * 13.39inch Loading Container 20GP: 429 cartons * 25 pcs = 10725 pcs 40HQ: 998 cartons * 25 pcs = 24950 pcs

Read more less

1. Chip: ESP8285+SX1281 2. Crystal: Epson Crystal 3. Frequency band: 2.4GHZ 4. Antenna: T-type antenna 5. Antenna connector: IPEX-MHF 6. RF power: 100mW 7. Refresh rate: 50HZ-F1000HZ 8. Input voltage: DC5V 9. Firmware version: ExpressLRS V3.3 10. Firmware upgrade: support WIFI upgrade firmware11. Size: about 18.9 x 11.2 x 1mm12. PCBA weight: about 0.8gFeatures:1. Immersion gold layer of high conductivity, lower resistance, faster signal transmission, more accurate flight control response, oxidation and corrosion resistance, to enhance the overall stability of the electrical connection2. Epson crystal high-precision frequency stabilization technology, low-power, long-life design, industrial-grade reliability, widely adapted to smart devices and communication systems3. 100mW power output on the transmitter side, 250Hz refresh rate, no-obstruction environment control distance of about 3,000 meters, long-distance flight is more secure4. Mini size design, easy to hide in the compact traverser or model, does not take up valuable space, effectively reduce the weight of the whole aircraft, improve flight efficiency and maneuverability5. High hardness and pressure-resistant plastic storage box, dustproof and moisture-proofPacking list:- Receiver x 1- T-antenna x 1- Spare shrink tube x 1- 28AWG silicone wiring (1 black 1 red 1 white 1 yellow) x 2- Instruction manual x 1- Storage box x 1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 560 Carton Weight 15.00kgs / 33.07lb Carton Size 51cm * 37cm * 34cm / 20.08inch * 14.57inch * 13.39inch Loading Container 20GP: 415 cartons * 560 pcs = 232400 pcs 40HQ: 964 cartons * 560 pcs = 539840 pcs

Read more less

1. Video output: HDMI, TYPE C-DP2. Wide dynamic range: supported3. Automatic frequency control: automatic4. Transmitter power range: maximum 25dBm5. Latency: 60ms6. Frequency band: 4.9-5.9GHz7. Image sensor: 1/2.8-inch image sensor8. Aperture: f/2.09. ISO range: 100 to 12800 (Auto)10. Resolution: 1080p/60fps11. Field of view: 155 degrees12. Power auto-sensing: automatic13. Antennas: dual14. Flight range: 6km (default antenna configuration)15. System power consumption: (maximum) 5W16. Operating voltage: 5V-26V17. Equivalent focal length: 2.28mm18. Focus point: 2 meters or more19. Mounting hole spacing: 25.5 x 25.5mm20. Air system size: about 30 x 30 x 6mm21. Air system camera size: about 17.5 x 14 x 14mm22. Air system weight: about 9.2g (including camera)23. Ground system size: about 60 x 21 x 73mm24. Ground system weight: about 74.7gFeatures:1. 1080p Full HD resolution with a high frame rate of 60 frames per second ensures smooth, ghost-free images during high-speed flight, significantly improving flight safety and image capture success rates2. Utilizing a high-performance transmitter chip and premium circuit design, it delivers 60ms low latency image transmission. In open, interference-free environments, it can transmit images up to 6 kilometers, meeting the needs of FPV long-distance exploration and various flight scenarios3. The receiver utilizes dual-antenna MIMO technology, intelligently selecting the optimal signal and automatically switching between signals. When the drones attitude changes, blocking one antenna, the other end seamlessly takes over, effectively reducing signal dead zones and preventing pixelation or lag caused by signal attenuation4. Adjustable channel selection, with support for manual channel selection, allows you to quickly switch to a clean channel when theres interference from other pilots or radio interference at the flight site, ensuring smooth and stable video5. Compatible with drones, fixed-wing aircraft, model aircraft, model cars, and model boats6. The ground system features HD output and supports direct HDMI connection to FPV headsets for plug-and-play operation. Compatible with HDMI-enabled displays, glasses, computers, and morePackaging list:- Air system x 1- Air system camera x 1- Ground system x 1- Rubber pads x 2- Antennas x 2- Screws x 8- Silicone cable x 1- Camera printer x 1- Storage case x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 60 Carton Weight 10.60kgs / 23.37lb Carton Size 47cm * 37cm * 32cm / 18.5inch * 14.57inch * 12.6inch Loading Container 20GP: 479 cartons * 60 pcs = 28740 pcs 40HQ: 1112 cartons * 60 pcs = 66720 pcs

Read more less

1. Top hard-shell quick-access compartment, specifically designed for remote controls, enabling instant retrieval2. Internal DIY fully adjustable modular compartment system, freely configurable to suit your gear3. Exterior constructed from high-density abrasion-resistant fabric, internally reinforced with rigid support—combining soft and hard elements for cushioning and shock absorption, ensuring equipment safety4. Adjustable ergonomic carrying system with thickened EVA padding and 3D breathable back panel. Contours to your back for shock absorption and moisture wicking, keeping you dry5. Reinforced waist belt and padding structure stabilizes the pack, efficiently transferring weight and distributing pressure evenly6. Professional protection for unpredictable outdoor weather, high-density water-repellent fabric with lotus-leaf effect locks in dryness; fully waterproof taped zippers provide precise moisture barrier7. Fabric composition: 35% Coating + 15% TPU + 40% XPE8. Compatibility: FPV drones, cameras, lenses, laptops up to 15.6 inches (not included) 9. Total capacity: about 40L10. External size: about 51 x 36 x 25cm11. Weight: about 3.19kgPackage list:- Backpack x 1- Battery pouches x 2- Rain cover x 1- Waist pad x 1- Adhesive straps x 2Specification: Package Weight One Package Weight 4.10kgs / 9.05lb One Package Size 54cm * 36cm * 28cm / 21.26inch * 14.17inch * 11.02inch Qty per Carton 1 Carton Weight 4.10kgs / 9.04lb Carton Size 54cm * 36cm * 28cm / 21.26inch * 14.17inch * 11.02inch Loading Container 20GP: 489 cartons * 1 pcs = 489 pcs 40HQ: 1137 cartons * 1 pcs = 1137 pcs

Read more less

1. Firmly installed, for AirTag can be firmly clamped into the bracket without worrying about falling off2. Strong nano adhesive, super viscous, durable and effective3. Quick installation, can be pasted anywhere4. Wide compatibility and convenient installation5. Tear it off without leaving adhesive, and do not worry about leaving offset prints, which will not damage the UAV surface at all6. Applicable model: for DJI FPV / Avata / Mavic 3 / Mini 3 Pro / Mini 2 / Mavic Air 2 / Mavic Pro / 精灵4 Pro / Mavic Mini / 飞米FIMI X8SE 2020 / Air 2S / Mavic 2, etc7. Material: plastic8. Net weight: 2g9. Gross weight: 4g10. Note: The product only includes the support, not other items of UAVSpecification: General Compatible with DJI:  Avata , Mini 3 Pro , Mavic 3 , Air 2S , Mini 2 , Mavic Air 2 , Mavic Mini , FPV , Mavic 2 Pro , Mavic Pro , Phantom 4 Pro Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs 40HQ: 1031 cartons * 500 pcs = 515500 pcs

Read more less

1. For DJI FPV Flight Video Glasses V22. Button design, no need to disassemble, just buckle it3. Adjustable length, suitable for different head types4. Good elasticity, thermal transfer process, wear-resistant and beautiful5. High-strength weaving, durable, strong bearing capacity, fine processing6. Specially designed fixed position for the battery, elastic design, easy to install, can stably fix the battery7. Can carry 10kg weight, easily cope with the weight of glasses8. Material: Elastic band9. Power cable length: 30cm10. Shrink size: 29x3.8x0.5cm11. Adjustment size: 40x3.8x0.5cm12. Stretch size: 55x3.8x0.5cm13. Weight: 33.5gSpecification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 13cm * 10cm * 4cm / 5.12inch * 3.94inch * 1.57inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs 40HQ: 412 cartons * 356 pcs = 146672 pcs

Read more less

1. For DJI FPV Flight Video Glasses V22. Button design, no need to disassemble, just buckle it3. Adjustable length, suitable for different head types4. Good elasticity, thermal transfer process, wear-resistant and beautiful5. High-strength weaving, durable, strong bearing capacity, fine processing6. Specially designed fixed position for the battery, elastic design, easy to install, can stably fix the battery7. Can carry 10kg weight, easily cope with the weight of glasses8. Material: Elastic band9. Power cable length: 30cm10. Shrink size: 29x3.8x0.5cm11. Adjustment size: 40x3.8x0.5cm12. Stretch size: 55x3.8x0.5cm13. Weight: 33.5gSpecification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 13cm * 10cm * 2cm / 5.12inch * 3.94inch * 0.79inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs 40HQ: 412 cartons * 468 pcs = 192816 pcs

Read more less

1. For DJI FPV Flight Video Glasses V22. Button design, no need to disassemble, just buckle it3. Adjustable length, suitable for different head types4. Good elasticity, thermal transfer process, wear-resistant and beautiful5. High-strength weaving, durable, strong bearing capacity, fine processing6. Specially designed fixed position for the battery, elastic design, easy to install, can stably fix the battery7. Can carry 10kg weight, easily cope with the weight of glasses8. Material: Elastic band9. Power cable length: 30cm10. Shrink size: 29x3.8x0.5cm11. Adjustment size: 40x3.8x0.5cm12. Stretch size: 55x3.8x0.5cm13. Weight: 33.5gSpecification: General Compatible with DJI:  FPV Goggles V2 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 13cm * 10cm * 0.8cm / 5.12inch * 3.94inch * 0.31inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs 40HQ: 458 cartons * 500 pcs = 229000 pcs

Read more less

1. Using SCHOTT optical glass, precision grinding, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and scratch-resistant, effective protection3. UV protection lens: used for shooting in the seaside, mountains, snowfields and open spaces, etc., it can reduce the blue tone caused by ultraviolet rays, and can also eliminate the interference of ultraviolet rays on the CCD4. CPL: mainly used to eliminate harmful non-metallic reflected light, increase color density, improve the clarity and expressiveness of the picture5. ND filter: prevent overexposure in strong light environment and resist scattered light6. NDPL: Combines the advantages of ND light reduction and PL polarizer, eliminates reflections, enhances contrast, and makes the picture more three-dimensional7. Anti-light pollution filter (Night): Effectively reduce light pollution and make the picture show true color8. Star: There will be a starburst effect when shooting where the light is brighter9. Material: frame lightweight aluminum + optical glassSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 7cm * 8cm * 2cm / 2.76inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 36cm / 16.54inch * 12.99inch * 14.17inch Loading Container 20GP: 534 cartons * 400 pcs = 213600 pcs 40HQ: 1240 cartons * 400 pcs = 496000 pcs

Read more less

1. Using SCHOTT optical glass, precision grinding, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and scratch-resistant, effective protection3. UV protection lens: used for shooting in the seaside, mountains, snowfields and open spaces, etc., it can reduce the blue tone caused by ultraviolet rays, and can also eliminate the interference of ultraviolet rays on the CCD4. CPL: mainly used to eliminate harmful non-metallic reflected light, increase color density, improve the clarity and expressiveness of the picture5. ND filter: prevent overexposure in strong light environment and resist scattered light6. NDPL: Combines the advantages of ND light reduction and PL polarizer, eliminates reflections, enhances contrast, and makes the picture more three-dimensional7. Anti-light pollution filter (Night): Effectively reduce light pollution and make the picture show true color8. Star: There will be a starburst effect when shooting where the light is brighter9. Material: frame lightweight aluminum + optical glassSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 7cm * 8cm * 2cm / 2.76inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 36cm / 16.54inch * 12.99inch * 14.17inch Loading Container 20GP: 534 cartons * 400 pcs = 213600 pcs 40HQ: 1240 cartons * 400 pcs = 496000 pcs

Read more less

1. Using SCHOTT optical glass, precision grinding, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and scratch-resistant, effective protection3. UV protection lens: used for shooting in the seaside, mountains, snowfields and open spaces, etc., it can reduce the blue tone caused by ultraviolet rays, and can also eliminate the interference of ultraviolet rays on the CCD4. CPL: mainly used to eliminate harmful non-metallic reflected light, increase color density, improve the clarity and expressiveness of the picture5. ND filter: prevent overexposure in strong light environment and resist scattered light6. NDPL: Combines the advantages of ND light reduction and PL polarizer, eliminates reflections, enhances contrast, and makes the picture more three-dimensional7. Anti-light pollution filter (Night): Effectively reduce light pollution and make the picture show true color8. Star: There will be a starburst effect when shooting where the light is brighter9. Material: frame lightweight aluminum + optical glassSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 11cm * 10cm * 2cm / 4.33inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 36cm / 16.54inch * 12.99inch * 14.17inch Loading Container 20GP: 534 cartons * 200 pcs = 106800 pcs 40HQ: 1240 cartons * 200 pcs = 248000 pcs

Read more less

1. Using SCHOTT optical glass, precision grinding, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and scratch-resistant, effective protection3. UV protection lens: used for shooting in the seaside, mountains, snowfields and open spaces, etc., it can reduce the blue tone caused by ultraviolet rays, and can also eliminate the interference of ultraviolet rays on the CCD4. CPL: mainly used to eliminate harmful non-metallic reflected light, increase color density, improve the clarity and expressiveness of the picture5. ND filter: prevent overexposure in strong light environment and resist scattered light6. NDPL: Combines the advantages of ND light reduction and PL polarizer, eliminates reflections, enhances contrast, and makes the picture more three-dimensional7. Anti-light pollution filter (Night): Effectively reduce light pollution and make the picture show true color8. Star: There will be a starburst effect when shooting where the light is brighter9. Material: frame lightweight aluminum + optical glassSpecification: General Compatible with DJI:  FPV Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 7cm * 8cm * 2cm / 2.76inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 36cm / 16.54inch * 12.99inch * 14.17inch Loading Container 20GP: 534 cartons * 400 pcs = 213600 pcs 40HQ: 1240 cartons * 400 pcs = 496000 pcs

Read more less