Optical Series

519 products


  • TBD06039971.jpg@57ff4438b4885a50f868bc26882a3615

    2 Fiber Port+3 Ethernet Port AB-PCBA 100Mbps Fiber Transceiver

    1. Specifications: 2 fiber optic ports + 3 RJ45 ports 100Mbps PCBA fiber optic converter2. Transmission rate: 100Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 20km6. Product weight: 62g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm

    $15.55

  • S-PC-1418.jpg@e46e4f863e4a5136fc73535f50decc58

    LC-FC Dual-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-FC Fiber Optic Jumper 2. Connector type: LC-FC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    $6.76

  • NK-A6L 5.1 Audio Gear Digital Sound Decoder-garmade.com

    NK-A6L 5.1 Audio Gear Digital Sound Decoder, EU Plug

    1. Convert DTS / AC3 source digital audio to analog 5.1 audio or stereo audio output. 2. The analog stereo(L / R) signals after digital processing chip handle convert it to analog 5.1 channel output. 3. Multi-channel audio input(SPDIF, Coaxial, Stereo), 2 x SPDIF input, 1 x Coaxial input, 1 x Stereo, 1 x USB. 4. Analog 5.1-channel or stereo output. 5. Plug and play, easy to use.

    $43.20

  • EMK Female to Female Conversion Head Optical Fiber Adapter Audio Adapter-garmade.com

    EMK Female to Female Conversion Head Optical Fiber Adapter Audio Adapter

    1. Reliable quality, can achieve electrical isolation, prevent digital noise from being transmitted through the ground wire, and help to improve the signal-to-noise ratio of the DAC 2. Effectively reduce the interference of audio signals around the equipment 3. PVC shell, flame retardant, high temperature resistance, strong pressure resistance 4. High-definition sound quality transmission to ensure complete signal transmission 5. When there are 2 fiber optic cables at home and the length is not enough, you can use this extension connector to effectively extend the fiber optic cable 6. Both ends are fiber square square female holes, more convenient 7. Can be used for: DVD, power amplifier, TV, speaker equipment, etc.

    $6.41

  • EMK OD6.0mm 3.5mm Digital Sound Toslink to Mini Toslink Digital Optical Audio Cable, Length:3m-garmade.com

    EMK OD6.0mm 3.5mm Digital Sound Toslink to Mini Toslink Digital Optical Audio Cable, Length:3m

    1. Suitable for Macbook, home theater, Blu-ray, AV receiver, DVD, CD player, etc. 2. Imported plastic optical fiber (POF) core, OD6.0mm 3. Cable outer diameter: 4.0mm, 6.0mm 4. 24K gold-plated lead head 5. Dust cover design, easy to use 6. Support 5.1 7.1 surround sound

    $13.12

  • EMK YL-A 10m OD8.0mm Gold Plated Metal Head Toslink Male to Male Digital Optical Audio Cable-garmade.com

    EMK YL-A 10m OD8.0mm Gold Plated Metal Head Toslink Male to Male Digital Optical Audio Cable

    1. The item is a toslink male to toslink male audio fiber cable. 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light, thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Using good quality fiber core ensures high speed, high efficiency, high fidelity, and low loss of transmission. 5. OD 8.0mm PVC jacket prevents cable from damage and adds flexibility and durability for years of listening pleasure. 6. Metal head strong and sturdy. 7. Non-slip metal grip connectors provide easy installation. 8. Dust cap protects connector from contamination when not in use. 9. This optical fiber cable widely used on CD / DVD / DAT / MD / TD and other digital equipment, and it provides you fully enriched and detailed sound quality.

    $30.69

  • 1m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)-garmade.com

    1m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $7.24

  • 2m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(Pink)-garmade.com

    2m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(Pink)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $8.09

  • 2m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)-garmade.com

    2m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $8.09

  • 3m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)-garmade.com

    3m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $8.79

  • 10m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)-garmade.com

    10m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $11.99

  • 20m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)-garmade.com

    20m EMK OD2.2mm Digital Audio Optical Fiber Cable Plastic Speaker Balance Cable(White)

    1. Material: PVC2. OD: 2.2mm3. Compatible with most SPDIF/Toslink port devices4. The optical fiber transmits digital signals in the form of light pulses without interference from point magnetism and noise, and the sound quality is clear5. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission6. Soft thread cable body, flexible to use7. Dust protection caps on both ends of the joint to prevent oxidation, rust and other situations

    $15.85

  • 10m EMK OD6.0mm Square Port to Round Port Set-top Box Digital Audio Optical Fiber Connecting Cable-garmade.com

    10m EMK OD6.0mm Square Port to Round Port Set-top Box Digital Audio Optical Fiber Connecting Cable

    1. Choose high-quality PMMA fiber material, signal transmission is not interfered by electromagnetic and noise2. 3.5mm Mini-Toslink interface, more convenient and compatible3. Convex lens technology makes the port contact more fit, can focus the beam highly, reduce the time difference and distortion during transmission4. The shell is made of aluminum alloy nickel plated material, high strength protection, safer and more durable5. The outside is adopted high-quality nylon braided wire to protect the wire body, which is soft and tensile6. Dust protection caps on both ends of the joint are designed to prevent oxidation, rust and other situations7. The port uses 24K gold plating, more stable and durable8. Compatible with most Mini-Toslink port devices

    $17.50

  • EMK Male To Female SPDIF Paired Digital Optical Audio Extension Cable, Cable Length: 2m (Blue)-garmade.com

    EMK Male To Female SPDIF Paired Digital Optical Audio Extension Cable, Cable Length: 2m (Blue)

    1. The audio port is extended, making it more convenient to plug and unplug 2. The outer quilt is made of nylon braided mesh to protect the wire body, which is soft and tensile, and reduces damage 3. Male-to-female digital optical fiber extension cable, high-fidelity transmission sound quality, support for a variety of audio, stable and not loose 4. Support the transmission of multiple audios, using standard S/PDIF protocol transmission, support the transmission of PCM, Dolby, DTS, 5.1 and other audio signals 5. Low dispersion PMMA material, POF high-quality optical fiber, fast and accurate transmission of digital signals 6. Using PMMA fiber material, the signal transmission is highly resistant to electromagnetic and noise interference, no noise and no current sound, and the audio and video quality is better and clearer 7. High polished convex lens Toslink port, contact fit, can highly focus the beam, reduce the time difference and distortion during transmission, and transmit signals with clearer high-fidelity audio and video 8. Outer quilt: Nylon woven mesh 9. OD: middle quilt: 5.0mm, lining: 2.0mm, PMMMA fiber core: 1.0mm, outer quilt: 6.0mm 10. Sound quality: HD lossless HIFI 11. Cable length: 1M, 1.5M, 2M, 3M

    $16.55

  • PC6621B.jpg@6ed8f872ebc5c4384aeaca00be8aa828

    NK-A6L 5.1 Audio Gear Digital Sound Decoder, US Plug

    1. Convert DTS / AC3 source digital audio to analog 5.1 audio or stereo audio output. 2. The analog stereo(L / R) signals after digital processing chip handle convert it to analog 5.1 channel output. 3. Multi-channel audio input(SPDIF, Coaxial, Stereo), 2 x SPDIF input, 1 x Coaxial input, 1 x Stereo, 1 x USB. 4. Analog 5.1-channel or stereo output. 5. Plug and play, easy to use.

    $42.98

  • PC6621D.jpg@6ed8f872ebc5c4384aeaca00be8aa828

    NK-A6L 5.1 Audio Gear Digital Sound Decoder, AU Plug

    1. Convert DTS / AC3 source digital audio to analog 5.1 audio or stereo audio output. 2. The analog stereo(L / R) signals after digital processing chip handle convert it to analog 5.1 channel output. 3. Multi-channel audio input(SPDIF, Coaxial, Stereo), 2 x SPDIF input, 1 x Coaxial input, 1 x Stereo, 1 x USB. 4. Analog 5.1-channel or stereo output. 5. Plug and play, easy to use.

    $42.98

  • PC6621C.jpg@6ed8f872ebc5c4384aeaca00be8aa828

    NK-A6L 5.1 Audio Gear Digital Sound Decoder, UK Plug

    1. Convert DTS / AC3 source digital audio to analog 5.1 audio or stereo audio output. 2. The analog stereo(L / R) signals after digital processing chip handle convert it to analog 5.1 channel output. 3. Multi-channel audio input(SPDIF, Coaxial, Stereo), 2 x SPDIF input, 1 x Coaxial input, 1 x Stereo, 1 x USB. 4. Analog 5.1-channel or stereo output. 5. Plug and play, easy to use.

    $42.98

  • S-PC-41032.jpg@54a2f98c11ad27c27b3942f77ec20333

    Digital Audio Optical Fiber Toslink Cable, Cable Length: 5m, OD: 5.0mm

    1. Digital Optical Audio Cable - Molded - M/M 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light; thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Gold Plated ferule prevents corrosion and provides for maximum protection of the fiber tip. 5. Precision Polished fiber tips for maximum signal transfer (includes tip protectors). 6. Connect to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. 7. Connectors: Toslink Male to Toslink Male 8. Designed for CD, D/A Converters, Dolby Digital DTS Surround sound receivers, DVD, MiniDisk players and recorders, Pro Audio cards, etc. 9. Cable Length: 5m 10. OD: 5.0mm

    $11.32

  • S-PC-4103.jpg@495efea3c1cfc8d78c36ccfeb60a482d

    Digital Audio Optical Fiber Toslink Cable, OD: 5.0mm, Length: 1.5m

    1. Digital Optical Audio Cable - Molded - M/M 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light; thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Gold Plated ferule prevents corrosion and provides for maximum protection of the fiber tip. 5. Precision Polished fiber tips for maximum signal transfer (includes tip protectors). 6. Connect to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. 7. Connectors: Toslink Male to Toslink Male 8. Designed for CD, D/A Converters, Dolby Digital DTS Surround sound receivers, DVD, MiniDisk players and recorders, Pro Audio cards, etc. 9. Cable Length: 1.5m 10. OD: 5.0mm

    $8.36

  • S-PC-41033.jpg@9032c8cd76a6a753ea6f30f92d94adc3

    Digital Audio Optical Fiber Toslink Cable, Cable Length: 1m, OD: 5.0mm

    1. Digital Optical Audio Cable - Molded - M/M 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light; thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Gold Plated ferule prevents corrosion and provides for maximum protection of the fiber tip. 5. Precision Polished fiber tips for maximum signal transfer (includes tip protectors). 6. Connect to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. 7. Connectors: Toslink Male to Toslink Male 8. Designed for CD, D/A Converters, Dolby Digital DTS Surround sound receivers, DVD, MiniDisk players and recorders, Pro Audio cards, etc. 9. Cable Length: 1m 10. OD: 5.0mm

    $7.64

  • S-PC-41034.jpg@6fdf019915dcf3238b19c0a4008797aa

    Digital Audio Optical Fiber Toslink Cable, Cable Length: 2m, OD: 5.0mm

    1. Digital Optical Audio Cable - Molded - M/M 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light; thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Gold Plated ferule prevents corrosion and provides for maximum protection of the fiber tip. 5. Precision Polished fiber tips for maximum signal transfer (includes tip protectors). 6. Connect to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. 7. Connectors: Toslink Male to Toslink Male 8. Designed for CD, D/A Converters, Dolby Digital DTS Surround sound receivers, DVD, MiniDisk players and recorders, Pro Audio cards, etc. 9. Cable Length: 2m 10. OD: 5.0mm

    $8.94

  • S-PC-41035.jpg@3fc1e6a442264335577ec371d1ce2671

    Digital Audio Optical Fiber Toslink Cable, Cable Length: 3m, OD: 5.0mm

    1. Digital Optical Audio Cable - Molded - M/M 2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels. 3. Optical cables transfer the signal using light; thus completely eliminating any chance for RFI, EMI or ground loop interference. 4. Gold Plated ferule prevents corrosion and provides for maximum protection of the fiber tip. 5. Precision Polished fiber tips for maximum signal transfer (includes tip protectors). 6. Connect to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. 7. Connectors: Toslink Male to Toslink Male 8. Designed for CD, D/A Converters, Dolby Digital DTS Surround sound receivers, DVD, MiniDisk players and recorders, Pro Audio cards, etc. 9. Cable Length: 3m 10. OD: 5.0mm

    $9.57

  • TBD06039972.jpg@704fd60722efbc31dcc708fef00f263f

    3 Fiber Port+2 Ethernet Port AAB-PCBA 100Mbps Fiber Transceiver

    1. Specifications: 3 fiber optic ports + 2 RJ45 ports 100Mbps PCBA fiber optic converter2. Transmission rate: 100Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 20km6. Product weight: 53g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm

    $16.45

  • TBD06040006.jpg@57153b515401df5ace901bdef89c963f

    2-in-1 10-30mW Fiber Optic Red Light Pen + Optical Power Meter (-70+6dBm) Set

    Optical Power Meter:1. Mini and exquisite: the body design conforms to the requirements of ergonomics, and the size is small, easy to store in the pocket, clip on the clothes, and carry it with you2. 2.5mm universal interface design, suitable for various interfaces such as SC/ST/FC interface3. High precision measurement, fast response, measurement error +/-0.2dB4. 7 wavelengths, 850nm/980nm/1300nm/1310nm/1490nm/1550nm/1625nm5. User self-calibration and adjustment value, flexible and accurate measurement6. LED lighting, easy to check the line construction in the dark environment, making the work more convenient7. Probe type: InGaAs8. Power measurement range: -70~+10dBm/-50~+26dBm9. Uncertainty: less than 0.2dB10. Display resolution: 0.01dB11. Working temperature: -10~+60 degrees Celsius12. Storage temperature: -25~+70 degrees Celsius13. Power working time: 20 hours (No. 7 AAA 1.5V battery × 2, delivery does not include batteries)14. Size/weight: 127×36.5×28mm/61gRed light fault detector:1. Mini compact, high-quality ceramic ferrule, LED lighting2. 2.5mm universal interface design, suitable for various interfaces such as SC/ST/FC interface3. Wavelength range: 650nm red laser head4. Power range: 10/20/30mw5. Test distance: 5-8km/12-15km/20-25km6. Laser type: LD7. Modulation frequency: CW/2Hz8. Power supply: 2 x AAA batteries (batteries not included)9. Dimensions: 127 x 36.5 x 28mm10. Working temperature: 61g

    $40.14

  • TBD06040106.jpg@6151ab8398989972cb7f4ed40a8fcec8

    100pcs/pack 45mm Single Pin Optical Fiber Heat Shrinkable Tube Optical Hot Melt Tube

    1. Optical fiber heat shrinkable tube better protects the optical fiber and prolongs the service life of the optical fiber2. Both ends of the ironing head are sealed: both ends of the heat shrinkable tube are designed with locks to effectively prevent the inner steel needle from falling off3. High-quality 304 steel needle, high strength, light weight, high temperature resistance and long service life4. Environmentally friendly PE material, made of cross-linked polyolefin material, has greatly improved performance in terms of extension, oil and cold resistance, cracking, etc. Anti-corrosion, can meet the use under harsh conditions, and is safer to use5. Only need to connect the optical fiber to be fused in the tube to effectively protect the fused part without affecting the loss6. Structure: heat-shrinkable tube + heat-melt tube + stainless steel optical fiber continuous protection elementSpecification:1. Outer skin material: environmentally friendly PE material2. Steel needle material: 304 stainless steel3. Steel needle specification: diameter 1.2mm4. Length: 45mm5. Working temperature: -55-105 degrees Celsius6. Scope of application: fiber splicing parts7. Packing: 100 pieces/pack

    $7.01

  • TBD06039963.jpg@19404e947b40aa30a8b5783b7912c315

    2 x 10/100/1000 RJ45 Port & 4 x 1000M SFP Port Fiber Optic Switch

    1. Specifications: 4 SFP fiber optic ports + 2 RJ45 ports Gigabit fiber optic converter2. Transmission rate: 1000Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 3-5km6. Product weight: 495g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm10. Dimensions: 170 x 90 x 32mm

    $32.31

  • TBD06039973.jpg@af2b6684c35052bd9b2c8fc1a794009e

    8 Fiber Port+2 Lan Port 1000Mbps Fiber Transceiver

    1. Specifications: 8 fiber optic ports + 2 RJ45 ports 1000Mbps fiber optic converter2. Transmission rate: 1000Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 3-5km6. Product weight: 670g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm10. Dimensions: 220 x 110 x 27mm

    $53.37

  • TBD06040029.jpg@9d2aeb9c09dab2aa883c38baabbe14a3

    4 Core Fiber Splitter Box Wall Mounted FTTX Distribution Box

    1. The shell is made of high-strength plastic material, corrosion-resistant spray paint, and can withstand vertical pressure greater than or equal to 200N2. The cabinet can be opened and closed flexibly, and at the same time has the functions of dustproof, anticorrosion and waterproof3. It can be installed with SC/FC/LC and other miniature optical splitters4. It can be installed indoors and outdoors to meet the installation needs in various environments, with high flexibility and wide selectionParameter:1. Equipment name: 4-core optical fiber distribution box2. Features: rainproof, dustproof, anti-theft3. Working temperature: -40~60 degrees Celsius4. Protection level: IP555. Working environment: indoor, outdoor6. Shell material: ABS7. Mountable equipment: 4 flanges8. Size: 205 x 135 x 40mm9. Product weight: about 324.5g/piece (including packaging)

    $11.57

  • TBD06039979.jpg@f150d5635a6cc2f52157fbcc2e1758a7

    FTTH Distribution Box with 16 PLC Splitter Can Hold Up to 16 Subscribers Drop Cable

    1. ABS material, waterproof and corrosion-resistant, anti-aging2. Features: waterproof, dustproof and anti-theft3. Protection class: IP654. Loadable accessories: 18 flanges and 8 differential or 1-8 insert optical splitters5. Working environment: indoor and outdoor6. Working temperature: -40 to 60 degrees Celsius7. Cabinet material: PC+ABS8. Dimensions: 300 x 235 x 110mm9. Weight: 1.45kg

    $18.03

  • TBD0604015003.jpg@d0eefb9924018a8cddbb8e73eeda9164

    10pcs 7mm Ceramic Core Replacement Parts For Fiber Optic Visual Fault Locator

    1. When the fiber optic visual fault locator laser is very bright, but there are signs of looseness when the fiber jumper is inserted, the red light cannot be injected into the optical fiber, and no light can be seen at the other end of the optical fiber, it means that the ceramic sleeve is damaged and needs to be replaced with a new one.2. Autonomous replacement, saving time and effort3. Applicable to: fiber optic visual fault locator, optical power meter, pda red light all-in-one machine, etc.4. Most of the ceramic cores used in red light pens are 7mm. If you are not sure, you can consult the original instrument manufacturer or buy a (5mm+7mm) ceramic package and try it back. There is only one type of metal head. Please confirm clearly before purchasing.5. Product material: ceramic /metal

    $7.54

  • TBD06039962.jpg@4f97cb1d54ef56d4bf31bc7c87d668f5

    3 Fiber Port & 3 LAN Port 10/100Mbps Ethernet Switch Fiber Optic Switch

    1. Specifications: 3 fiber optic ports 3 RJ45 ports 100Mbps fiber optic converter2. Transmission rate: 100Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 20km6. Product weight: 310g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm

    $19.60

  • TBD06039964.jpg@e0393cd84bb1eb32e3eead9e3c826153

    2 Fiber Port & 4 LAN Port 10/100M Ethernet Switch Fiber Optic Switch

    1. Specifications: 2 fiber optic ports + 4 RJ45 ports 100Mbps fiber optic converter2. Transmission rate: 100Mbps3. Fiber mode: single mode single fiber4. Interface type: SC interface5. Transmission distance: 20km6. Product weight: 266g7. Working voltage: DC 5V 2A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm10. Dimensions: 100 x 72 x 27mm

    $17.72

  • TBD06040105.jpg@0d9e93a07bc6d4f591ce669dad0d0fed

    50pcs/pack 60mm Double -Pin Leather Thread Optical Fiber Heat Shrinkable Tube Optical Hot Melt Tube

    1. Optical fiber heat shrinkable tube better protects the optical fiber and prolongs the service life of the optical fiber2. Both ends of the ironing head are sealed: both ends of the heat shrinkable tube are designed with locks to effectively prevent the inner steel needle from falling off3. High-quality 304 steel needle, high strength, light weight, high temperature resistance and long service life4. Environmentally friendly PE material, made of cross-linked polyolefin material, has greatly improved performance in terms of extension, oil and cold resistance, cracking, etc. Anti-corrosion, can meet the use under harsh conditions, and is safer to use5. Only need to connect the optical fiber to be fused in the tube to effectively protect the fused part without affecting the loss6. Structure: heat-shrinkable tube + heat-melt tube + stainless steel optical fiber continuous protection elementSpecification:1. Outer skin material: environmentally friendly PE material2. Steel needle material: 304 stainless steel3. Steel needle specifications: diameter 1.2mm, length 55mm4. Length: 60mm5. Working temperature: -55-105 degrees Celsius6. Scope of application: fiber splicing parts7. Packing: 50 pieces/pack

    $7.01

  • TBD0604015001.jpg@d1c5669060676b2a63c2d90ce516eb4f

    10pcs Metal Head Connector Replacement Parts For Fiber Optic Visual Fault Locator

    1. When the fiber optic visual fault locator laser is very bright, but there are signs of looseness when the fiber jumper is inserted, the red light cannot be injected into the optical fiber, and no light can be seen at the other end of the optical fiber, it means that the ceramic sleeve is damaged and needs to be replaced with a new one.2. Autonomous replacement, saving time and effort3. Applicable to: fiber optic visual fault locator, optical power meter, pda red light all-in-one machine, etc.4. Most of the ceramic cores used in red light pens are 7mm. If you are not sure, you can consult the original instrument manufacturer or buy a (5mm+7mm) ceramic package and try it back. There is only one type of metal head. Please confirm clearly before purchasing.5. Product material: ceramic /metal

    $7.54

  • TBD0604015002.jpg@d0eefb9924018a8cddbb8e73eeda9164

    10pcs 5mm Ceramic Core Replacement Parts For Fiber Optic Visual Fault Locator

    1. When the fiber optic visual fault locator laser is very bright, but there are signs of looseness when the fiber jumper is inserted, the red light cannot be injected into the optical fiber, and no light can be seen at the other end of the optical fiber, it means that the ceramic sleeve is damaged and needs to be replaced with a new one.2. Autonomous replacement, saving time and effort3. Applicable to: fiber optic visual fault locator, optical power meter, pda red light all-in-one machine, etc.4. Most of the ceramic cores used in red light pens are 7mm. If you are not sure, you can consult the original instrument manufacturer or buy a (5mm+7mm) ceramic package and try it back. There is only one type of metal head. Please confirm clearly before purchasing.5. Product material: ceramic /metal

    $7.54

  • TBD06040107.jpg@6151ab8398989972cb7f4ed40a8fcec8

    100pcs/pack 60mm Single Pin Optical Fiber Heat Shrinkable Tube Optical Hot Melt Tube

    1. Optical fiber heat shrinkable tube better protects the optical fiber and prolongs the service life of the optical fiber2. Both ends of the ironing head are sealed: both ends of the heat shrinkable tube are designed with locks to effectively prevent the inner steel needle from falling off3. High-quality 304 steel needle, high strength, light weight, high temperature resistance and long service life4. Environmentally friendly PE material, made of cross-linked polyolefin material, has greatly improved performance in terms of extension, oil and cold resistance, cracking, etc. Anti-corrosion, can meet the use under harsh conditions, and is safer to use5. Only need to connect the optical fiber to be fused in the tube to effectively protect the fused part without affecting the loss6. Structure: heat-shrinkable tube + heat-melt tube + stainless steel optical fiber continuous protection elementSpecification:1. Outer skin material: environmentally friendly PE material2. Steel needle material: 304 stainless steel3. Steel needle specifications: diameter 1.2mm, length 55mm4. Length: 60mm5. Working temperature: -55-105 degrees Celsius6. Scope of application: fiber splicing parts7. Packing: 100 pieces/pack

    $7.01

  • TBD06039945.jpg@57c16112b632d74b8f2b5bbecab0ab49

    NESTONG 100M Single-Mode Fiber Optic Transceiver POE Photoelectric Converter,CN Plug

    1. 1 optical 2 electrical 10/100M switch, electrical port supports POE, IEEE 802.3AF/AT international standard, port power supply power 15.4W/25.4W, total power of the whole machine 30W, backplane bandwidth 1.0Gbps, network port transmission support 100 meters, single fiber SC TX1310nm2. High-quality chip, efficient decoding, stable and fast transmission3. High-quality cold-rolled plate, double-sided ventilation, fast heat dissipation and long service life4. Plug and play, no need to set up, support hot plug, connect optical fiber and network cable, automatic matchingParameter:1. Production transmission rate: optical port 1.25G/network port 100M2. Fiber mode: single mode single fiber3. Interface type: SC interface & POE electrical interface4. Transmission distance: 25km5. Product size: 105mm x 70mm x 25mm6. Product weight: 427g7. Working voltage: DC 52V 1A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A side: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm

    $45.60

  • TBD06039947.jpg@57c16112b632d74b8f2b5bbecab0ab49

    NESTONG Gigabit Single-mode Fiber Optic Transceiver POE Photoelectric Converter,CN Plug

    1. 1 optical 2 electrical 10/100/1000M switch, the electrical port supports POE, IEEE 802.3AF/AT international standard, the port power supply power is 15.4W/25.4W, the total power of the whole machine is 30W, the backplane bandwidth is 5.0Gbps, and the network port Transmission support 100 meters, single fiber SC TX1310nm2. High-quality chip, efficient decoding, stable and fast transmission3. High-quality cold-rolled plate, double-sided ventilation, fast heat dissipation and long service life4. Plug and play, no need to set up, support hot plug, connect optical fiber and network cable, automatic matchingParameter:1. Production transmission rate: optical port 1.25G/network port 1000M2. Fiber mode: single mode single fiber3. Interface type: SC interface & POE electrical interface4. Transmission distance: 25km5. Product size: 105mm x 70mm x 25mm6. Product weight: 427g7. Working voltage: DC 52V 1A8. Working temperature: -10 to 60 degrees Celsius9. Working wavelength:-A end: TX1310nm/RX1550nm-B end: TX1550nm/RX1310nm

    $50.23

  • 30MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection-garmade.com

    30MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection

    1. Metal tip/ceramic core can be replaced by yourself2. One button operation, easy to understand3. Strong anti-oxidation, durable, alloy material performance, corrosion resistance4. Standard 2.5mm universal interface, support FC, SC, ST5. Easy to penetrate, long distance fiber optic, laser head stability, good penetration effect6. Metal body, wear-resistant and drop-resistant, non-slip handle, comfortable hand feeling7. Power supply: 2 AA batteries (not included)8. Material: metal9. Weight: about 145g

    $17.05

  • 10MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection-garmade.com

    10MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection

    1. Metal tip/ceramic core can be replaced by yourself2. One button operation, easy to understand3. Strong anti-oxidation, durable, alloy material performance, corrosion resistance4. Standard 2.5mm universal interface, support FC, SC, ST5. Easy to penetrate, long distance fiber optic, laser head stability, good penetration effect6. Metal body, wear-resistant and drop-resistant, non-slip handle, comfortable hand feeling7. Power supply: 2 AA batteries (not included)8. Material: metal9. Weight: about 145g

    $12.75

  • 50MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection-garmade.com

    50MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection

    1. Metal tip/ceramic core can be replaced by yourself2. One button operation, easy to understand3. Strong anti-oxidation, durable, alloy material performance, corrosion resistance4. Standard 2.5mm universal interface, support FC, SC, ST5. Easy to penetrate, long distance fiber optic, laser head stability, good penetration effect6. Metal body, wear-resistant and drop-resistant, non-slip handle, comfortable hand feeling7. Power supply: 2 AA batteries (not included)8. Material: metal9. Weight: about 145g

    $26.83

  • 5MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection-garmade.com

    5MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection

    1. Metal tip/ceramic core can be replaced by yourself2. One button operation, easy to understand3. Strong anti-oxidation, durable, alloy material performance, corrosion resistance4. Standard 2.5mm universal interface, support FC, SC, ST5. Easy to penetrate, long distance fiber optic, laser head stability, good penetration effect6. Metal body, wear-resistant and drop-resistant, non-slip handle, comfortable hand feeling7. Power supply: 2 AA batteries (not included)8. Material: metal9. Weight: about 145g

    $12.42

  • 20MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection-garmade.com

    20MW Fiber Red Light Test Pen Red Light Sources Through Optical Pen Optical Fiber Detection

    1. Metal tip/ceramic core can be replaced by yourself2. One button operation, easy to understand3. Strong anti-oxidation, durable, alloy material performance, corrosion resistance4. Standard 2.5mm universal interface, support FC, SC, ST5. Easy to penetrate, long distance fiber optic, laser head stability, good penetration effect6. Metal body, wear-resistant and drop-resistant, non-slip handle, comfortable hand feeling7. Power supply: 2 AA batteries (not included)8. Material: metal9. Weight: about 145g

    $16.73

  • EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 8m(Black)-garmade.com

    EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 8m(Black)

    1. High density woven outer network2. Soft, flexible and durable wire3. 24K gold plated head, braided mesh protection4. Durable and pluggable interface, fast transmission, stable and accurate5. Avoid signal interference, reduce the audio signal interference around the equipment, sound quality is delicate, warm, low distortion6. Compatible with most 3.5mm Mini-Toslink port devices7. Highly polished convex lens fiber optic head, can highly focus the beam, reduce the transmission time difference and distortion, make the transmission signal high fidelity audio and video more clear

    $23.14

  • EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 15m(Black)-garmade.com

    EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 15m(Black)

    1. High density woven outer network2. Soft, flexible and durable wire3. 24K gold plated head, braided mesh protection4. Durable and pluggable interface, fast transmission, stable and accurate5. Avoid signal interference, reduce the audio signal interference around the equipment, sound quality is delicate, warm, low distortion6. Compatible with most 3.5mm Mini-Toslink port devices7. Highly polished convex lens fiber optic head, can highly focus the beam, reduce the transmission time difference and distortion, make the transmission signal high fidelity audio and video more clear

    $20.00

  • EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 2m(Black)-garmade.com

    EMK QH4.0 Mini Toslink 3.5mm Interface SPDIF Audio Fiber Optical, Length: 2m(Black)

    1. High density woven outer network2. Soft, flexible and durable wire3. 24K gold plated head, braided mesh protection4. Durable and pluggable interface, fast transmission, stable and accurate5. Avoid signal interference, reduce the audio signal interference around the equipment, sound quality is delicate, warm, low distortion6. Compatible with most 3.5mm Mini-Toslink port devices7. Highly polished convex lens fiber optic head, can highly focus the beam, reduce the transmission time difference and distortion, make the transmission signal high fidelity audio and video more clear

    $11.47

  • EMK 1 to 2 Audio Optical Digital Cable(1.5m+1m)-garmade.com

    EMK 1 to 2 Audio Optical Digital Cable(1.5m+1m)

    1. Material: bare copper wire2. Allows you to connect a toslink optical digital audio source and split into two different receiving devices such as A/V receiver and TV3. Designed to split a single signal in two4. Ideal for connecting CD players, DVD players or other digital audio sources to receivers and recorders5. Use low-loss core, low-jitter synthetic fiber and heavy metal connectors to suppress vibration6. Size: 1.5m+1m

    $16.45

  • P2102-60 100pcs Optical Fiber Thermal Tube Bare Fiber Special Transparent Tubes-garmade.com

    P2102-60 100pcs Optical Fiber Thermal Tube Bare Fiber Special Transparent Tubes

    1. 1.2mm steel pin with indented ends to prevent the pin from falling out2. Fiber optic splicing and protection element consisting of cross-linked polyolefin, hot melt tube and reinforced stainless steel wire3. No influence on the optical conductivity of the fibre4. Protects the splice point and improves mechanical strength5. Easy to handle, reducing the risk of damage to the fibre during installation6. Transparent sleeve, making it possible to see the splice condition at a glance7. Sealed construction provides good resistance to temperature and humidity8. Durable and oxidation resistant9. Application: fibre splice area10. Operating temperature: -55 to 105 degrees Celsius11. Shrinkage temperature range: 90-120 degrees Celsius12. Material: stainless steel needle + PE13. Inner and outer diameter: 3.8x1.3mm

    $7.41

Login

Forgot your password?

Don't have an account yet?
Create account