Test Equipment

1518 products


  • Capacitor Capacitance Meter Tester 6013 XC6013L(Yellow)-garmade.com

    Capacitor Capacitance Meter Tester 6013 XC6013L(Yellow)

    1. Data hold 2. Full overload protection 3. Low battery display 4. Backlight 5. Lead socket for small parts 6. Zero adjustment 7. LCD size: 45mm x 20mm 8. Product size:138 x 69 x 31 mm 9. Product Net weight: 170g 10. Battery:(9V included) 11. Max display:1999 12. Sampling rate 2~3 sec each sample

    $24.67

  • Ultrasonic Thickness Meter Tester Gauge Velocity 1.2~225mm Metal (GM-100)(Red)-garmade.com

    Ultrasonic Thickness Meter Tester Gauge Velocity 1.2~225mm Metal (GM-100)(Red)

    1. The tool has wide measurement range from 1.20 ~ 225.00 mm (0.047 ~ 8.86 inch) with accurate measurements. Moreover, the meter has ultrasonic wave velocity measurement function from 1000 m/s to 9999 m/s. 2. This unit is widely used in various precise measurements for different hardware / parts in industrial realm. One of its important applications is to monitor the level of thickness decreasing during operation of various and pressure container. 3. It is diffusely applied in manufacture fields, metal processing and commercial inspection. This product can be applied for the material that conduct and reflect constant sonic velocity 4. Auto Calibration to assure the accuracy 5. Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer 6. Use "up" and "down" keys to make a quick adjustment for the sound velocity/thickness and a quick recall to the stored data 7. Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not 8. 10 thickness measurement storage and recall function available, which facilitated the height work or working in wild area 9. Sound velocity measurement: with a given thickness by a sample hardware to measure the sound velocity, which avoid the further conversion or consultation of the table 10. 12 sound velocity for different material which also adjustable 11. Low battery indication 12. Auto power off mode designed to conserve battery life 13. More than 10000 times long life keys 14. The unit has a special memory that retains all of its setting even when the power is off 15. LCD Digital display: 4 digits 16. Minimum display unit: 0.1 mm 17. Working frequency: 5 MHz 18. Measurement Range: 1.2 ~ 225.0 mm (Steel) 19. Minimum limit for Tubes measurement: 20mm x 3mm (Steel) 20. Accuracy: ??± (1% H + 0.1 mm) (H denotes the measured thickness) 21. Sound Velocity Range: 1000 ~ 9999 m/s 22. Measuring Sound Velocity with a given thickness - Measuring Range: 1000 ~ 9999 m/s 23. Operating Temperature: 0 ~ 40 degree centigrade 24. Power supply: 3 x 1.5 AAA Alkaline Batteries (Not included) 25. Size: 150x76x30mm 26. Note: couplant (Not included)

    $95.49

  • JPB-70A Portable Dissolved Oxygen Analyzer Water Quality Aquaculture Dissolved Oxygen Meter Detector-garmade.com

    JPB-70A Portable Dissolved Oxygen Analyzer Water Quality Aquaculture Dissolved Oxygen Meter Detector

    Technical features:1. Dot matrix backlit LCD display2. Automatic temperature compensation, fast response time3. Portable and easy to carry4. Equipped with our own dissolved oxygen electrode (polarographic type coated type)Main Specifications:1. Measuring range: Dissolved oxygen: (0.0~20.0) mg/L, temperature: (0-40) degrees Celsius2. Basic error: Dissolved oxygen: ±0.01mg/L, temperature: ±1°C3. Residual current: not more than 0.15mg/L4. Response time: no more than 30s (90% response at 20 degrees Celsius)5. Range of automatic temperature compensation: (0-40) degrees Celsius6. Adopt 1.5V LR44 button battery x 4 (not included in delivery)7. Dimensions: 4×18.5 cm8. Weight: 88 gramsPacking list:1. Host x12. One meter wire dissolved oxygen electrode x13. Electrode membrane cover x34. A reagent x1 (set)5. Empty bottle spare x16. Certificate of conformity x17. Warranty card x18. Manual x1

    $151.54

  • Original Xiaomi Mijia Bluetooth Temperature and Humidity Thermometer 2-garmade.com

    Original Xiaomi Mijia Bluetooth Temperature and Humidity Thermometer 2

    Product parameters: 1. Size: 43x43x12.5mm. 2. LCD display size: 28x28mm. 3. Material: ABS, PMMA. 4. Voltage: DC 2.5V-3V. 5. Battery: CR2032. 6. Wireless connection: Bluetooth 4.2 BLE. 7. Measuring range: 0-60 degrees Celsius. 8. Resolution: 0.1 degrees Celsius. 9. Humidity range: 0% -99% RH. 10. Resolution: 1% RH. Packing list: Bluetooth Thermo Hygrometer 2 x 1 Wall sticker x 1 Manual x 1

    $10.24

  • WP6900 Formaldehyde Detector Indoor And Outdoor Portable Air Detector-garmade.com

    WP6900 Formaldehyde Detector Indoor And Outdoor Portable Air Detector

    1. Display form: LED screen2. Formaldehyde detection range: 0-1.999 mg/m33. TVOC detection range: 0-9.999 mg/m34. TVOC effectors: benzene, alkanes, alkenes, ketones, etc.5. Detection temperature: -10-45 degrees Celsius6. Detection principle: Principle of semiconductor gas sensor7. Battery: AA battery x28. Working voltage: 2.4-3V9. Size: 11.8x5.5x2.2 cm10. Weight: 104 grams11. Remarks: delivery without battery

    $18.96

  • BENETECH GM1312 2.4 inch LCD Screen Thermocouple Thermometer Measure J,K,T,E,N and R Type, Measure Range: -50~300C-garmade.com

    BENETECH GM1312 2.4 inch LCD Screen Thermocouple Thermometer Measure J,K,T,E,N and R Type, Measure Range: -50~300C

    About the product1. The electrical compensation function provide the compensation to the thermocouple error so as to improve the overall precision 2. To measure the thermocouple of J, K,T,E,N and R type. 3. Unit Celsius and fahrenheit unit 4. Human centered design, easy operation 5. Measuring Range: J-type: -210C to 1200C (-346F to 2192F) K-type: -200C to 1372C (-328F to 2501F) T-type: -250C to 400C (-418F to 752F) E-type: -150C to 1000C (-238F to 1832F) N-type: -200C to 1300C (-328F to 2372F) R-type: 0C to 1767C (32F to 3212F) 6. Resolution: 0.1C/F<1000Degree; 1.0C/=<1000Degree 7. Electrical compensation 8. C/F Switch

    $26.53

  • BENETECH GM3120 Electromagnetic Radiation Tester-garmade.com

    BENETECH GM3120 Electromagnetic Radiation Tester

    About the product1. Radiation survey meter can test electric field radiation and magnetic field emission to reach the optimal test result. 2. It is used to test and learn electromagnetic radiation situation indoor and outdoor. 3. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on LCD digital display after processing by the control micro-chip. 4. You can make reasonable processing or taking effective prevention measures toward the electromagnetic radiation according to the test resultFeatures1. One instrument with two uses, it can test the electric field and the magnetic field radiation at the same time 2. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically 3. Data locking, one-key lock of the radiation value 4. LCD graphic display of the radiation value trend 5. Radiation assessment, remind you whether the radiation value is safe or not 6. Fashionable design, easy on-hand operation, it is easy to move or make field measurementRange of Application1. Electromagnetic radiation monitoring: House and apartment, office, outdoor and industrial site 2. Electromagnetic radiation test: Mobile phone, computer, TV set, refrigerator and high voltage cable radiation test 3. Radiation protection product test: Test effects of radiation-proof clothes, radiation-proof film and other prevention articles

    $28.58

  • Pocket-sized PH Meter with ATC(Yellow)-garmade.com

    Pocket-sized PH Meter with ATC(Yellow)

    1. Display: LCD Digital 2. Lightweight pocket size kit set, easy to carry & store. 3. Simple & easy operation - Simply turn it on, remove the protective cap and immerse the electrode into the solution to be measured 4. Instant, quick display of results 5. A perfect tool for testing the acidity or alkalinity of liquids, ideal for all home and laboratory pH testing applications including aquariums, hydroponics, swimming pools, etc.

    $13.73

  • Home Swimming Pool Water PH / CL2 Tester, Cable length: 1.2m-garmade.com

    Home Swimming Pool Water PH / CL2 Tester, Cable length: 1.2m

    1) Quick test of water pH and Cl2 levels 2) Chlorine calibration for more accurate testing 3) No adjustment needed for pH testing 4) Simple and easy to operate 5) Get results instantly 6) Light weight and handy 7) No chemical testing and solutions needed 8) Recommended chlorine level for pools and spa is 1.2 to 1.7ppm 9) Recommended pH level for pools and spa is 7.2 to 7.8 10) Dimension: -Main unit: 190 x 120mm -Probe with handle: 150mm long -Probe (only): 48mm long (not included black band) -Cable length: 1.2m 11) Power supply: 1x AA battery (not included) 12) Weight: 160g

    $23.77

  • MD7822 Smart Grain Moisture Tester Ultra-Long Probe Digital Moisture Meter-garmade.com

    MD7822 Smart Grain Moisture Tester Ultra-Long Probe Digital Moisture Meter

    1. Measuring range: 2%~30%2. Resolution: 0.5%3. Ambient temperature: -10-60 degrees Celsius4. Operating temperature: -10-40 degrees Celsius5. Operating humidity: 0-70%Rh6. Automatic reading lock function7. Automatically display low voltage prompt symbol8. Power supply: 9V battery (not included in delivery)9. Dimensions: host: 17.4x7.3x3.8 cm, probe: 36.5x4.3x2.5 cm10. Using microcomputer technology (CPU) to make the measurement more accurate11. With automatic temperature compensation function12. The large-screen LCD display with backlighting ensures clear readings and no parallax13. There is a dedicated backlight control switch, which is convenient for saving battery14. Food types that can be tested: wheat, rice, rice, corn, soybeans, coffee beans, medicinal materials

    $30.48

  • Universal Battery Tester for 1.5V AAA, AA and 9V 6F22 Batteries-garmade.com

    Universal Battery Tester for 1.5V AAA, AA and 9V 6F22 Batteries

    1) Test batteries types: **1.5V AAA, AA, HP16, MN2400, R03, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1 **9V PP3, MN1604, 6F22, 006P 2) Portable and useful 3) Never need to guess the battery level again 4) Three colored indicators give accurate and easy battery power reading 5) Size: 120*7*35mm

    $6.33

  • BENETECH GM3110 Surface Resistance Meter-garmade.com

    BENETECH GM3110 Surface Resistance Meter

    About the productAs one resistance meter for object surface, it can measure the resistance value on object surface by putting two parallel electrodes close to object surface to be measured, so as to judge whether the measured object is a conductor, static material or insulator; meanwhile the meter can be used to measure the resistance to ground of object, which is specially applied to different anti-static fieldsFeatures1. Surface resistance test 2. Three modes to display resistance value on object surface or material property simultaneously 3. Ambient temperature measuring 4. Temperature unit conversion 5. Data holding 6. LCD backlight

    $29.55

  • Audio Portable Diamond Selector III Tester-garmade.com

    Audio Portable Diamond Selector III Tester

    1. Diamond Selector III is a compact electronic device for distinguishing real diamonds from other simulated stones. It is designed for quick, precise, and safe diamond testing 2. Light weight and ultra-compact (with a size of credit card) 3. LED light and audio result indication 4. Accurate and reliable reading 5. Metal alert 6. Simple calibration for stones of various sizes 7. Convenient carrying case 8. Testing platform for loose stones 9. Testing capability: Diamonds / Diamond simulation (e.g.CZ) / Metal 10. Auto off: N/A 11. Initial warm up: about 20 seconds 12. Indicator: Audio and LED lamps 13. Power supply: 2 X AA batteries (not included) 14. Size: 84 x 53 x 14mm 15. Weight: 40g

    $29.17

  • HC5705.jpg@24066792eff8075ef7bfe9c7d5eb6cb9

    TN-73 High-precision VU Meter DB Power Discharge Flat Meter Mixer Power Meter

    Specification1. Movable part: movable coil type 2. Pointer materials: Nickel Silver Strips 3. Pointer color: Black 4. Direction of pointer swing: From left to right 5. Pointer length: 30+/-1mm from the center axis to the end of the needle 6. Pointer width: 0.45 +/- 0.05mm 7. Direction of use: Vertical 8. Operating temperature limit: -10 degree C to + 60 degree C RH 35 to 85% 9. Storage temperature limit: -20 degree C to + 60 degree C RH 35 to 85% 10. Solder condition: Put the terminal about 3 mm into a tin plate with a temperature of 230 degree C. The placement time is 3.5 seconds. After this test, 7-14 items remain normal. 11. Solder temperature: hold the solder gun at 350a?? for 3.5 seconds, and the front end of the terminal is about 3mm in contact with the solder gun. After this test, items 7-14 remain normal. 12. Anti-static: use dry nylon cloth to test the transparent cover surface in the same direction for three times. Mark the pointer difference below 1/3 of the scale length, and return to zero after three seconds. 13. Light bulb specification: DC12V 12W Note: Do not put the meter in direct sunlight, and store the meter in the packing box to prevent foreign matter from entering the meterElectrical Performance1. Standard test conditions: temperature 20 degree C, humidity 70%, no difference in test results, it can also be tested under normal temperature and humidity. 2. Electric influenza degree: Pointer sensitivity 1mA+/- 5% from zero scale to uppper scale (full scale position) 3. Internal impedance: 50ohm+/- 5% 4. Insulation impedance: above 500V DC plus 50M OHm for the charging circuit of the meter outer box. Insulation impedance between the casing of the meter and the charging circuit is tested at 500V DC voltage. 5. Zero position: the meter is in a standard position. The place where the front end of the pointer is integrated with the zero scale center is the reference. The permissible error of the overlap between the pointer and the zero scale is +/-1mm. 6. Equalization: Permissible error range ??±1mm when the standard position of the meter is tilted 90 degrees before and after use. 7. Stick pointer: instantly add three times the full scale current over current, slowly reduce to 1/2 of the electric flu reading, then the pointer will return to 1/3 of the scale. 8. Friction: The error range of indicating point ??±1mm when the electric current is added to the meter and slowly increased or decreased to a certain value. 9. Braking: Instantly add 2/3 of the current of the dial plate, within one second from the beginning to the position indicated by the pointer.Special Test1. Over load test: input ten times the full scale current every five seconds, repeat this action for nine times. Each time is 0.5 seconds, 7 to 14 items remain normal after this test. 2. Vibration test: After the meter is packaged, it is shaken up and down by 4mm every 1,000 times per minute on the vibration plate, 10 minutes in each direction. After this test, 7-14 items remain normal. 3. Impact test: The meter fell from a height of 30cm to a 3cm thick board after being packaged, and the test was conducted in three directions,X.Y.Z, 7-14 items remained normal after this test. 4. Reliability test: Electrofluence limit remains within standard after 100,000 correction point current inputs. 5. Environmental impact test: Temperature 50a??, humidity 85%, lasting 100 hours, after this test 7-14 items remain normal. 6. Terminal tension test: the terminal must bear 1 kg tension, lasting for 60 seconds.Specification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 12cm * 7cm * 7cm / 4.72inch * 2.76inch * 2.76inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 37cm * 62cm / 16.54inch * 14.57inch * 24.41inch Loading Container 20GP: 276 cartons * 100 pcs = 27600 pcs 40HQ: 642 cartons * 100 pcs = 64200 pcs

    $20.52

  • TBD0599234701A.jpg@7077651507d66632a042ed175e56ae73

    2 PCS Household Electrolyzer Test Electrolysis Water Tools Water Purity Level Meter PH Testing Tool Water Quality Tester(EU Plug)

    1. The instrument consists of an electrolytic rod with positive and negative electrodes (one is an iron rod and the other is an aluminum rod), and two electrodes are used as electric field introduction. After electrolysis, the positive Fe3+ ions are dissolved under the action of electric current. They will combine with the negative OH-ions in the water to form water-insoluble Fe (OH) 3 particles. These particles have strong agglomeration and adsorption activity to colloidal particles in water, thereby forming an adsorption and agglomeration process for organic or inorganic substances in water.At the same time, due to the action of the electric current, the originally dissolved metal particles, such as manganese, potassium, cobalt, etc., are reduced and gradually aggregate to form metal clusters, resulting in the color separation of different metal ions. .After electrolysis, different colors of water show various impurities in the water.2. Color identification:- Yellow: Dissolved acids, silicon compounds, organic minerals, molybdenum, silicon, fluoride and other organic substances.- Green: arsenic, mercury, lead, copper and sodium.- Blue: bacteria, viruses, carcinogens, organic phosphorus, etc. (fertilizers, detergents and pesticides)- Red: iron, rust and bacteria- White: lead, zinc, mercury, inorganic salt dirt.- Black: heavy metals (zinc, lead, copper, chromium, manganese, cadmium)3. Material: ABS+ aluminum iron4. Measuring range: 50 to -200 mg/L.5. Rated voltage: 220V/50Hz6. Application: domestic drinking water, water purifier testing.7. Note: The electrolyzer can only prove the presence or absence of impurities, not the quality of the waterPacking list:1 x Electrolyzer body2 x aluminum rod2 x iron rodSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 12.5cm * 7.5cm * 4cm / 4.92inch * 2.95inch * 1.57inch Qty per Carton 100 Carton Weight 17.50kgs / 38.58lb Carton Size 42cm * 38cm * 26cm / 16.54inch * 14.96inch * 10.24inch Loading Container 20GP: 642 cartons * 100 pcs = 64200 pcs 40HQ: 1491 cartons * 100 pcs = 149100 pcs

    $7.81

  • EDA0036667.jpg@6545a7649c1944a013c6faff2723080f

    SmartSensor AR884A Smart Wall Mounted Sound Level Meter, EU/US Plug

    1. 9.5 inches super large full-screen LCD with large bold red font to display for easy reading.2. 24 hours real-time monitoring the sound level.3. Support hanging on the wall(recommended) or free-standing on the desk.4. Wide measurement range from 30dB to 130dB, Frequency: 31.5Hz - 8KHz, Resolution: 0.1dB/1dB.5. Buzzing and flashing to remind you when the real-time measurement is reached to the alarm level, and hold the data for 3s then back to normal mode.6. Suitable for checking and monitoring the sound level for personal, family, business, studies, industrial, etc.Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 25cm * 10cm * 5.5cm / 9.84inch * 3.94inch * 2.17inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 42cm * 27cm * 30cm / 16.54inch * 10.63inch * 11.81inch Loading Container 20GP: 783 cartons * 20 pcs = 15660 pcs 40HQ: 1819 cartons * 20 pcs = 36380 pcs

    $93.77

  • GM1150A 50:1 Infrared Thermometer -18~1150 Degrees Celsius LCD Digital Temperature Meter Industrial Pyrometer 0.1~1EM Adjustable-garmade.com

    GM1150A 50:1 Infrared Thermometer -18~1150 Degrees Celsius LCD Digital Temperature Meter Industrial Pyrometer 0.1~1EM Adjustable

    Measurement range: -18 °C ~ 1150 °C ( 0 °F ~2102°F ) Accuracy: -18°C ~ 0°C( ± 3°C), 0°C ~100°C (± 1.5°C), 100°C~1150°C (±1.5%) Repeatability: 1 °C or 1% of reading Resolution: 0.1°C or 0.1°F Response Time: 500mSec, 95% response Emissivity : 0.1~1.00 adjustable Distance To Spot Ration: 50:1 Spectral response: 8~14μm Storage Temperature: -20°C ~ 60°C ( -4 °F ~140 °F ) Operating Temperature: 0°C ~ 40°C ( 32 °F ~104 °F ) Operating Humidity: 10-95% RH non-condensing, up to 30°C (86°F )

    $88.14

  • DR201 Digital Salt Refractometer Salinity Specific Gravity Meter 0~28% Refractometer Food Salt Content Tester Sodium Chloride NaCl-garmade.com

    DR201 Digital Salt Refractometer Salinity Specific Gravity Meter 0~28% Refractometer Food Salt Content Tester Sodium Chloride NaCl

    featureThe device is standardized and accurate and easy to read. Digital displays are fast and easy to read.Product specifications1. Apply sugarSodium chloride NaClsalinitysalinityproportionRefractive index2. Measurement range:Salinity: 0.0~28.0%Salinity: 0~280‰Proportion: 1.000~1.217Refractive index: 1.3330-1.4200nD3. Salt absorptionSalinity: 0.1%Salinity: 1‰Specific gravity: 0.001Refractive index: 0.0001nD4. AccuracySalinity: ±0.2%Salinity: ±2‰Specific gravity: ±0.002Refractive index: ±0.0003nD

    $217.96

  • WINTACT WT8802 Hydrogen Sulfide Monitor Professional Rechargeable Gas Sensor High Sensitive Digital Sound-light Vibration Alarm H2S Detector-garmade.com

    WINTACT WT8802 Hydrogen Sulfide Monitor Professional Rechargeable Gas Sensor High Sensitive Digital Sound-light Vibration Alarm H2S Detector

    Features Color-screen display, user-friendly interface.Bilingual choices:Chinese/English.Three alarm forms:sound/light/vibration .Data recording and review function, continuously record120,000 data logging.Charging function. Specification Test Gases: H2S Display Unit: %LEL Gas detection:EXMeasurement Range: 0~100μmo/molResolution: 0.1 Accuracy: ≤ ±5%FSIndication model:LCD display real-time date and system state,LED,sound,vibration indication alarm Response Time(90%): Less than 30 seconds Alarm: Sound and light vibration alarm Alarm Point: Adjustable Working Voltage: DC3.7V, 1800mAh Battery Model: LP103450-1800mAh rechargeable lithium batteryExplosion-proof Certificate NO.: CNEx 18.5122Explosion-proof Mark: Ex ib IIB T3 GbOperating Conditions: -20~50℃ / -4~122℉, < 95%Storage Conditions: -10~55℃ / 14~122℉, < 85%charging time:6-8hstandby time:more than 8h on end (slightly change with working state)Weight: 215.4g(with battery and back buuton)Item Size: 71 * 153* 49mm Package included 1 * Hydrogen Sulfide Monitor1 * Plastic Pipe1 * USB Cable1 * Gas Calibration Cover1 * Storage Box1 * User Manual

    $107.12

  • WINTACT WT8806 Carbon Monoxide Monitor Professional Rechargeable Gas Sensor High Sensitive Poisoning Sound-light Vibration Alarm CO Detector-garmade.com

    WINTACT WT8806 Carbon Monoxide Monitor Professional Rechargeable Gas Sensor High Sensitive Poisoning Sound-light Vibration Alarm CO Detector

    Features Color-screen display, user-friendly interface.Bilingual choices:Chinese/English.Three alarm forms:sound/light/vibration .Data recording and review function, continuously record120,000 data logging.Charging function. Specification Gas detection:COMeasurement Range: 0~100μmo/molResolution: 1 Accuracy: When the measuring range is(0~50)mol/mol,maximum allowable error is:5mol/mol.When the measuring range is(50~1000)mol/mol,maximum allowable error is:10%Indication model:LCD display real-time date and system state,LED,sound,vibration indication alarm Response Time(90%): Less than 30 seconds Alarm: Sound and light vibration alarm Alarm Point: Adjustable Working Voltage: DC3.7V, 1800mAh Battery Model: LP103450-1800mAh rechargeable lithium batteryExplosion-proof Certificate NO.: CNEx 18.5122Explosion-proof Mark: Ex ib IIB T3 GbOperating Conditions: -20~50℃ / -4~122℉, < 95%Storage Conditions: -10~55℃ / 14~122℉, < 85%charging time:6-8hstandby time:more than 8h on end (slightly change with working state)Weight: 215.4g(with battery and back buuton)Item Size: 71 * 153* 49mm Package included 1 * Carbon Monoxide Monitor1 * Plastic Pipe1 * USB Cable1 * Gas Calibration Cover1 * Storage Box1 * User Manual

    $131.06

  • WINTACT WT8811 Compoud Gas Monitor LCD Display Rechargeable Multifunction 4 in1 Combustible O2 H2S CO Gas Sensor Sound-light Vibration Alarm-garmade.com

    WINTACT WT8811 Compoud Gas Monitor LCD Display Rechargeable Multifunction 4 in1 Combustible O2 H2S CO Gas Sensor Sound-light Vibration Alarm

    Features 1.Color-screen display, user-friendly interface.2.Bilingual choices:Chinese/English.3.Three alarm forms:sound/light/vibration .4.Data recording and review function, continuously record5.120,000 data logging.6.Charging function. Specification Compound Gas Monitor Range Measuring item and Unit 1.Combustible gas LEL %LEL2.Oxygen O2 %VOL3.Hydrogen sulfide H2S μmol/mol4.Carbon Monoxide CO μmol/molRange:1.Combustible gas LEL: 0~1002.Oxygen O2 : 0~303.Hydrogen sulfide H2S:0~100 4.Carbon Monoxide CO :0~1000Resolution1.Combustible gas LEL: 0.12.Oxygen O2 : 0.13.Hydrogen sulfide H2S:0.14.Carbon Monoxide CO :1Accuracy: When the measuring range is(0~50)mol/mol,maximum allowable error is:5mol/mol.When the measuring range is(50~1000)mol/mol,maximum allowable error is:10%Indication model:LCD display real-time date and system state,LED,sound,vibration indication alarm Response Time(90%): Less than 30 seconds Alarm: Sound and light vibration alarm Alarm Point: Adjustable Working Voltage: DC3.7V, 1800mAh Battery Model: LP103450-1800mAh rechargeable lithium batteryExplosion-proof Certificate NO.: CNEx 18.5122Explosion-proof Mark: Ex ib IIB T3 GbOperating Conditions: -20~50℃ / -4~122℉, < 95%Storage Conditions: -10~55℃ / 14~122℉, < 85%charging time:6-8hstandby time:more than 8h on end (slightly change with working state)Item Size: 71 * 153* 49mm Package included 1 * Carbon Monoxide Monitor1 * Plastic Pipe1 * USB Cable1 * Gas Calibration Cover1 * Storage Box1 * User Manual

    $218.30

  • SNDWAY Pipe Scanner Thickness PVC Pipe Blockage Width Measuring Instrument, Specification:SW730 Standard (30 meters)-garmade.com

    SNDWAY Pipe Scanner Thickness PVC Pipe Blockage Width Measuring Instrument, Specification:SW730 Standard (30 meters)

    Brand Name:SNDWAYInduction range:More than 50cm1. Positioning is blocked within 5cm, greatly reducing the removal area2. With 4 sets of waterproof probe sets to be replaced, all kinds of environments can cope3. 50cm signal penetration, using smart chip, the induction is stronger4. Sensitivity can be adjusted, increase the size of the induction blockage point, together with a large sound buzzer, small, small range of accurate positioning of the blockage point, can clearly distinguish the blockage position5. Built-in lithium battery, straightforward and convenient

    $91.14

  • WP6932 Professional Home Formaldehyde Detector New House Measuring Formaldehyde Instrument MP2.5 Air Detector-garmade.com

    WP6932 Professional Home Formaldehyde Detector New House Measuring Formaldehyde Instrument MP2.5 Air Detector

    1. Display form: LCD2. Formaldehyde detection range: 0-1.999 mg/m33. TVOC detection range: 0-9.999 mg/m34. TVOC effectors: Benzene, alkanes, alkenes, ketones, etc.5. Temperature detection range: 0-50 degrees Celsius6. Moderate detection range: 20-90%RH7. Built-in battery: 1200mAh lithium battery8. Charging time: About 4 hours9. Battery life: About 2 hours10. USB interface: Type-C interface11. Input: 5V/1A12. Specifications: English version13. Dimensions: 15.1x6.9x4.5 cm

    $69.38

  • 700mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale-garmade.com

    700mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale

    1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-700mm

    $71.12

  • 800mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale-garmade.com

    800mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale

    1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-800mm

    $74.48

  • 900mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale-garmade.com

    900mm Measuring Range Milling Lathe Digital Readout Encoder Grating Electronic Ruler Linear Scale

    1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-900mm

    $77.86

  • BENETECH GM510 LCD Display Pressure Manometer(Yellow)-garmade.com

    BENETECH GM510 LCD Display Pressure Manometer(Yellow)

    1. Model: GM510 2. With11unitsto select:bar,mbar,kPa,kgf/cm2,mmHg,cmH2O,Ozf/in2,psi,inHg,inH2O,ftH2O. 3. USB dara hold. 4. USB interface 5. Low battery indicator function 6. Auto power off. 7. A computer through a USB adapter,can be used to record special software for data analysis

    $76.93

  • Electronic Digital Counter Portable Hand Operated Tally LCD Screen Finger Counter, Random Color-garmade.com

    Electronic Digital Counter Portable Hand Operated Tally LCD Screen Finger Counter, Random Color

    1. Ergonomically designed to fit wearing in finger 2. Portable, compact design, Light weight, easy for carry 3. With luminous function, clear to see, lower consumption Specifications: 1. Brand Name: RV77 2. DIY Supplies: Electrical 3. Type:5-digit Counters 4. Material: Plastic 5. Color: Random 6. Size: 3.8x3x1.8cm 7. Weight: 17g Package Included: 1 x Counter

    $4.52

  • W637 Digital Breath Alcohol Tester Easy Use Breathalyzer Alcohol Meter Analyzer Detector with LCD Display-garmade.com

    W637 Digital Breath Alcohol Tester Easy Use Breathalyzer Alcohol Meter Analyzer Detector with LCD Display

    With LCD Screen Or Not:Yes Gas Type:Alcohol Resolution ratio: :0.1 Reaction time: :1 (s) Power supply: :2 x AAA battery(Not Included) Weight: :70 g Support::Dropship Features: 1. Detection range:0.000% - 0.199% BAC / 0.000-0.995 mg/l 2. Digital display results (% BAC / mg /l) 3. Quick response and recovery. 4. Automatic power outage. 5. Orange back-light. 6. Low voltage indicator. Specifications: 1. Resolution ratio: 0.1 2. Reaction time: 1 (s) 3. Power supply: 2 x AAA battery(Not Included) 4. Weight: 70g Instructions: 1. Press the switch once, the LCD screen of the tester will turn on the lights, and it will send out a "noise". 2. The state of warm up number will jump from 10 to 0, and after the state blow 10 jumps to 0, the preheating program will be completed. 3. When the countdown is 6 seconds, the mouth is close to the breath test sensor and exhaled for 3-5 seconds to the sensor. 4. The screen can read the test results.

    $12.82

  • ME-9101 Automatic Reset Wobble Stick Head Mini Limit Switch(Blue)-garmade.com

    ME-9101 Automatic Reset Wobble Stick Head Mini Limit Switch(Blue)

    1. Model: ME-9101 2. Type: Wobble Stick Type, Automatic Reset 3. Power: AC 250V, 5A / DC: 115V, 0.4A 4. Mounting Hole Diameter: 4.5mm 5. Hole Center Point Distance: 56mm x 21mm 6. Stick Length: 90mm (70mm distance adjustable) 7. Body Dimension: 88 x 28 x 25mm 8. Color: Black & Blue 9. Material: Plastic, Metal & Rubber 10.Weight: 64g

    $6.80

  • 0-25mm Range Digital Display Micrometer Thickness Gauge-garmade.com

    0-25mm Range Digital Display Micrometer Thickness Gauge

    1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

    $83.90

  • RZ230 Other measuring instruments 0~1300μm Convenient / Measure / Pro-garmade.com

    RZ230 Other measuring instruments 0~1300μm Convenient / Measure / Pro

    RZ230 Paint Film Meter Tester Coating Measure Thickness Gauge Digital Portable Mini Thickness Gauge TesterIntroductions:The thickness gauge is used to measure the thickness of the plated and coatedsheeton metal, e.g. paint/enamel/ chrome on steel, paint and anodizing coating on aluminum/copper.The gauge takes the precision integrated probe, and uses principles of electro-magnetic inductionand the eddy current effect, which automatically detects the attributeof substrates. Application Field:The Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in the laboratory, workshop and outdoor. Operating Principle:Thegauge adopts the principle of electromagnetic induction and eddy current effect.It has F probe and N probe.F probe works on the magnetic induction principle and should be used for detecting the non-magnetic coating’s thickness such as chrome/copper/zinc/varnish/rubber on the iron/steel substrate.N probe works on the eddy current principle and should be used for detecting the insulating coating’s thickness such as paint/anodizing/ceramics on the aluminum/copper/brass substrate.

    $123.38

  • BENETECH GM8903 2.6 inch LCD Screen Digital Hot Wire Wind Speed Wind Temperature Anemometer-garmade.com

    BENETECH GM8903 2.6 inch LCD Screen Digital Hot Wire Wind Speed Wind Temperature Anemometer

    About the product1. Measuring: Air Velocity & Air Temperature & Air Volume 2. Measuring range: Air velocity, 0-30m/s; Air temperature, 0 - 45C, 32 - 113F; Air volume, 0-999900m3/min 3. Resolution: 0.001m/s, 0.1C 4. Unit of Velocity: m/s, Ft/min, Knots, Km/hr, Mph 5. C/F Selection 6. Air temperature measuring accuracy: +-2C 7. Air velocity measuring accuracy: +-3%+-0.1dgts 8. Max/Min reading 9. Average/Current reading 10. Data hold 11. Backlight display 12. Low battery indication 13. Manual/Auto power shut off 14. USB Interface and cable

    $158.27

  • GM816 Handheld Digital Anemometer Wind Speed Meter-garmade.com

    GM816 Handheld Digital Anemometer Wind Speed Meter

    1. Air Velocity & Temperature Measurement;2. Max/Average/Current air velocity measurement;3. ℃/℉ Temperature unit selection;4. Five units of air velocity:M/s, Km/h, ft/min, Knots, mph5. Beaufort scale;6. Backlight display;7. Manual/Auto power shut off;8. Wind chill indication;9. Low battery indication.B. LCD

    $15.82

  • BENETECH GM8902+ LCD Display Digital Digital Anemometer Air Flow Wind Speed Scale Meter-garmade.com

    BENETECH GM8902+ LCD Display Digital Digital Anemometer Air Flow Wind Speed Scale Meter

    Features1. Measurement of wind velocity, temperature and flow 2. Unit conversion of wind velocity,temperature and flow 3. Measurement of MAX and MIN wind velocity 4. Measurement of 2/3V max and average wind flow 5. Data holding,storing and deleting function 6. Low battery indicating function 7. Auto power off function (power off autocratically if no further operation for 10 minutes) 8. Large LCD display, backlight 9. Retractable drag rodSpecification1. Measuring Range: - Air Velocity: 0-45m/s, 0-140km/hr, 0-8800Ft/min, 0-88 knots, 0-100mph(accuracy +/-3%) - Air Temperature: 0 degree C~+45 degree C, 32 degree F-113 degree F(Accuracy+/-2 degree C) 2. Resolution: 1 degree C, 0.1m/s 3. Units of velocity: m/s.ft/min, knots, km/hr, mph 4. Power supply: 4 x 1.5V AAA battery (not included)

    $63.18

  • GM630 Digital Wood Moisture Meter with LCD(Orange)-garmade.com

    GM630 Digital Wood Moisture Meter with LCD(Orange)

    1. Moisture measurement range: 0-50% 2. Temperature measurement range: 0-50 degree C / 32-122 degree F 3. Measurement error / moisture value: +/-1.5 4. Temperature value: +/- 2 degree C / +/- 3.6 degree F 5. Wood density range : 0.27-1.05g/cm3 6. Detection depth: 0-50mm 7. The moisture response speed: 2s 8. Displayer: LCD 9. Runs on one 9V battery 10. Data hold function (memory function) 11. Moisture limit value setting 12. Battery level indication 13. Auto power-off function

    $37.25

  • Digital Moisture Meter (MD918)(Dark Blue)-garmade.com

    Digital Moisture Meter (MD918)(Dark Blue)

    Description: 1) Measurement through HF electromagnetic sensing 2) 10 different timber density at option 3) Automatic temperature compensation 4) Setting of upper limit of moisture content ratio, prompting of overrunning 5) Ultra-large LCD ensuring clear readings 6) Automatic prompting of low voltage Specifications: 1) MODEL: MD918 2) Measuring Range: 4%~80% 3) Max. Error: +/- 1%Rh+0.5 4) Resolution: 0.5% 5) Battery: 3 x 1.5V AAA battery (not included) 6) Size: 13.2cm x 6.7cm x 2.6cm

    $64.84

  • BENETECH GM610 Digital Wood Moisture Meter(Black)-garmade.com

    BENETECH GM610 Digital Wood Moisture Meter(Black)

    1) Measurement range: 2~40%/50%/60%/70% 2) Emissivity: 0.5 preset 3) Temperature range: - 10℃ ~ 60℃ 4) Humidity range: 20%RH~90%RH 5) The moisture response speed: 1s 6) Displayer: LCD 7) Reading lock 8) Environment temperature automatic compensation 9) Power: 2 x 1.5V AAA battery (not included)

    $26.30

  • BENETECH GM640 High Quality Digital Grain Moisture Meter with LCD Display-garmade.com

    BENETECH GM640 High Quality Digital Grain Moisture Meter with LCD Display

    Features1. Measuring range: Moisture 5%~30%, temperature -10~60C 2. Overflow alert 3. Grain species 4. Moisture standard setup 5. Unit shift between Celsius and Fahrenheit grain moisture meter can fast measurement of moisture content in grain. Multiple allocation, suitable for grain purchase, storage, processing and so on. This machine can measure the temperature of food at the same time, can measure 8 food: Rice wheat and barley feed corn soybean rice rapeseed

    $55.17

  • Original Xiaomi Superb Accurate Mini Exquisite Easy-to-use Water Purity Tester Water Quality TDS Tester(White)-garmade.com

    Original Xiaomi Superb Accurate Mini Exquisite Easy-to-use Water Purity Tester Water Quality TDS Tester(White)

    1. Easy-to-use. Just put the test pen into the water you want to test and press the button, then the TDS(total dissolved solids) of water shows on the display. 2. Superb technique, accurate data. Measure water purity accurately, pay close attention to families'health and safety. The lower the TDS the higher purity water has. 3. Extensively application. You can use it to test the purity of running water, plain boiled water, barreled pure water, cell water, filtered water, aquarium water, and so on. 4. lowenergy and intelligent. The tester has IPX6 waterproof body and lowenergy chip, it will auto off above 2 minutes nonuse. 5. 2 changeable button batteries are built in it. 6. Test range: 0-9990.

    $15.14

  • 5Meters 0-14 PH Test Paper Alkaline Acid Indicator Paper For Water Urine Saliva Litmus Testing Measuring Analysis Kits-garmade.com

    5Meters 0-14 PH Test Paper Alkaline Acid Indicator Paper For Water Urine Saliva Litmus Testing Measuring Analysis Kits

    Display Type:Digital With Backlight Or Not:No Model Number:PH Meters Specification: Brand new Total length: approx 5m PH range: 0-14 Feature: With distinct color PH scale for result comparisons. The test strip color changes must be matched with the pH scale color chart within about 15 seconds. Quick and easy to use. Provides reliable and accurate pH readings. Easy to carry. Appropriate for testing alkaline or acid level of any liquid. Great product to have in every lab and at home to measure and inspect water quality, urine, saliva, soil, alkaline diet, aquariums etc. Great for science education. Usage: Take out a test paper. The 2 color blocks all immersed in the liquid. After 1 seconds to take out, in contrast to the color of the color reading value in 30 seconds. Scale Reads From 0 to 14: 0 - 3 indicates a very acidic substance 4 - 6 indicates an acidic substance 7 indicates neutral 8 - 11 indicates alkalinity 12 - 14 indicates a very high level of alkalinityPackage included: 1 x PH Test Paper Note: Can not indicate the Acid or alkali solution when its density was lower than 0.01%. Keep dry for the rest paper. Please allow 0-1cm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

    $5.67

  • PC102 Swimming Pool Water Quality Tester PH Test Pen Chlorine Gas Water Quality Tester-garmade.com

    PC102 Swimming Pool Water Quality Tester PH Test Pen Chlorine Gas Water Quality Tester

    Main unit: 190 mm x 20 mmHandle probe: 150 mm longProbe (only): 48 mm longCable (only): 300 mm longPower: 1 aa alkaline battery (1.5v)Weight: 160g b (without battery)include:1 pH and Cl2 probe tester1 manual1 sandpaperStandard factory packagingPackaging InformationUnit type: weight per piece: 0.221 kg (0.49 lbs) Packing: 19 cm x 12 cm x 5 cm (7.48 in x 4.72 in x 1.97 in)

    $35.15

  • Portable High-precision PH Test Pen PH Acidity Meter PH Water Quality Detection Instrument(Yellow)-garmade.com

    Portable High-precision PH Test Pen PH Acidity Meter PH Water Quality Detection Instrument(Yellow)

    1. Series: portable PH test pen2. Working temperature: 0-60 degree C3. Measurement range: 0.00-14.00PH4. Resolution / accuracy: 0.01PH5. Battery: 2x1.5V (LR44) button batteries6. Calibration method: (4.01 / 6.86 / 9.18) three-point calibration7. Scope of application: domestic water, food PH, aquarium water quality, aquaculture and other fields8.Features: highly sensitive measuring probe, automatic temperature compensation function, three-point calibration function, automatic calibration function, easy to use, large screen display9. Product accessories:- 1xPH test pen- 1xPH 4.01 25 degree C PH Buffer Powder- 1xPH 6.86 25 degree C PH Buffer Powder- 1x user manual- 1x packaging box10. Product size / weight: 15.5x3.1x1.7cm / 49g11. Note: Some customers report that the product has data jumps, which is normal. (When using this product: After being placed in water, the data will always change slowly from the last decimal point, this is because the PH meter needs to adapt to the test environment. The data will be stable for about 1 minute when it is still, and this the final test data. In addition, if the water surface shakes, the data will also jump, so the test must ensure that the water surface is still.)

    $6.62

  • ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer-garmade.com

    ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer

    1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.

    $5.96

  • H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)-garmade.com

    H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)

    Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cm

    $8.47

  • H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)-garmade.com

    H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)

    Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cm

    $8.47

  • JHL-18A Digital Non-Contact Thermometer AC Voltage Detector Infrared Thermometer Voltage Pen Type Handheld Induction Voltage Tester-garmade.com

    JHL-18A Digital Non-Contact Thermometer AC Voltage Detector Infrared Thermometer Voltage Pen Type Handheld Induction Voltage Tester

    Product specifications1. Temperature:Temperature measurement range: -30 ° C ~ 250 ° C2. Resolution: 0.1 ° C / 0.1 ° F3. Accuracy level: ± 2 ° C4. Response time response time <1 second5. Distance ratio: (D: S) 1:16. Emissivity: 0.95NCV:1. Measurement range: 12~1000VAC2. Measurement frequency: 50Hz / 60Hz3. Safety standards: CA.III 1000V / CAI.IV 600V, CE4. Product size; 152x25x28mm5. Battery: 2xAAA 1.45V (without battery) Package Included1 non-contact AC voltage detector (without battery)1 x English manual

    $20.81

  • Chip Test Leads Component LCR Testing Tool Multimeter Tester Meter Pen Test Probe Lead Tweezers-garmade.com

    Chip Test Leads Component LCR Testing Tool Multimeter Tester Meter Pen Test Probe Lead Tweezers

    Product description:1. Name: capacitance meter test dice2. Clip distance: 13 mm3. Overall length: 66 cm4. Line length: 47 cm5. Weight: 51 grams6. Safe withstand voltage: =< 250V7. High and low temperature resistance conditions: -10 degree C ~ 40 degree C, CAT II1000V 2AFeatures:1. High-voltage resistant wire, strong anti-wrap line2. Ergonomic design, non-slip design, easy to operate with one hand, two-point test3. Suitable for measuring patch components, testing resistance, capacitance, inductance, etc.4. It is the best partner for inductance and capacitance meter, LCR bridge meter, etc.5. The plug is equipped with a dust plug to prevent dust and foreign matter from entering.

    $5.12

Login

Forgot your password?

Don't have an account yet?
Create account