Bestselling Products
Back Camera Lens Frame for Xiaomi 12T Pro (Blue)
1. Replacement back camera lens frame for Xiaomi 12T Pro. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$7.91
-
2UUL SC55 Super Dry UV Curable Solder Mask 10cc
1. Excellent to change your faulty/broken parts2. Replace your faulty part and start using your device again3. UV Light must be used to cure the UV Glue, it literally hardens in about 30 seconds, but is recommended a cure time of about 3 minutes for a stronghold. Sunlight can be used too4. Professional repair tools aim to give assistance during device repair.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
$8.51
-
For Samsung Galaxy A54 SM-A546B OEM Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$9.54
-
For Samsung Galaxy A13 4G SM-A135F OEM LCD Screen With Digitizer Full Assembly
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
$18.68
-
For Samsung Galaxy M33 SM-M336B OEM Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$8.69
-
For Samsung Galaxy A04S SM-A047 OEM LCD Screen Digitizer Full Assembly with Frame
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed7. Note: No Fingerprint Identification
$22.86
-
For Xiaomi 13 Lite Battery Back Cover(Black)
1. Battery back cover replacement part. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$15.56
-
For Xiaomi Redmi K60 Original Battery Back Cover(Black)
1. Battery back cover replacement part. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$9.51
-
For Xiaomi Redmi 12 4G Battery Back Cover(Blue)
1. Battery back cover replacement part. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$10.84
-
For Xiaomi Redmi Note 12S Front Housing LCD Frame Bezel Plate
1. Front housing LCD frame bezel plate replacement part.2. Replace your broken or unworkable one.3. Each item has been checked and in good condition before shipping.4. Make your device look more refreshing than ever5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$9.85
-
Back Camera Lens Frame for Xiaomi 12T (Black)
1. Replacement back camera lens frame for Xiaomi 12T. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$7.94
-
For Xiaomi Mi 9 Original Camera Lens Cover (Black)
1. Camera lens cover replacement for Xiaomi Mi 9. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$9.04
-
For Xiaomi Mi 9 Camera Lens Cover (Blue)
1. Camera lens cover replacement for Xiaomi Mi 9. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$9.03
-
For Xiaomi Redmi Note 11 Pro+ 5G India Camera Lens Cover
1. Camera lens cover replacement for Xiaomi Redmi Note 11 Pro+ 5G India. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
$8.31
-
For Samsung Galaxy M14 SM-M146B LCD Screen Digitizer Full Assembly with Frame
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed
$28.72
-
For Samsung Galaxy A04 SM-A045F Original LCD Screen Digitizer Full Assembly with Frame
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed
$21.98
-
For Xiaomi Poco F5 Pro TFT LCD Screen with Digitizer Full Assembly
About the product1. Replacement LCD screen + touch screen digitizer assembly for Xiaomi Poco F5 Pro 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
$28.98
-
LCD Screen Frame Bezel Plate For Xiaomi Mi Watch (Black)
1. LCD screen frame bezel plate replacement for Xiaomi Mi Watch. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$12.36
-
For Motorola Moto G Stylus 5G 2022 SIM Card Tray + Micro SD Card Tray (Blue)
1. SIM card tray + Micro SD card tray for Motorola Moto G Stylus 5G 2022. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$6.32
-
For Motorola Moto G Power 2022 SIM Card Tray + Micro SD Card Tray (Black)
1. SIM card tray + Micro SD card tray for Motorola Moto G Power 2022. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$6.32
-
For Motorola Moto G7 Power US Version SIM Card Tray + Micro SD Card Tray (Black)
1. SIM card tray + Micro SD card tray for Motorola Moto G7 Power US Version. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$6.32
-
For Samsung Galaxy Watch Active2 40mm SM-R830 Rear Housing Cover (Brown)
1. Rear housing cover replacement for Samsung Galaxy Watch Active2 40mm SM-R830 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts
$18.67
-
Original Back Cover With Heart Rate Sensor + Wireless Charging Module For Samsung Galaxy Watch 3 45mm SM-R840 (Black)
1. Bottom cover with heart rate sensor + wireless charging module replacement for Samsung Watch 3 45mm SM-R840 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts
$37.09
-
LCD Screen Frame Bezel Plate For Samsung Galaxy Watch 42mm SM-R810 (Gold)
1. LCD screen frame bezel plate replacement part. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$31.37
-
Original USB Watch Charger For Samsung Galaxy Watch4 SM-R865
1. Lightweight, easy to carry2. Good anti-interference performance3. Magnetic charging, easy to use4. Output short circuit protection, over-voltage and overload safety protection5. Strong adsorption is not easy to fall off, just put it on and charge it6. Please check if this charger is suitable for your Watch before bidding.
$17.54
-
Original USB Watch Charger For Samsung Galaxy Watch Active2 SM-R830
1. Lightweight, easy to carry2. Good anti-interference performance3. Magnetic charging, easy to use4. Output short circuit protection, over-voltage and overload safety protection5. Strong adsorption is not easy to fall off, just put it on and charge it6. Please check if this charger is suitable for your Watch before bidding.
$17.54
-
For Motorola Edge 30 Ultra Front Screen Outer Glass Lens with OCA Optically Clear Adhesive
Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Front screen outer glass lens with OCA optically clear adhesive replacement part.2. Replace your broken or unusable item with a new one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
$9.13
-
For Google Pixel 4 Front Screen Outer Glass Lens with OCA Optically Clear Adhesive
Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Front screen outer glass lens with OCA optically clear adhesive replacement part.2. Replace your broken or unusable item with a new one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
$6.32
-
For Xiaomi Redmi 10 5G Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$12.26
-
For Motorola Moto G8 Power Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$11.72
-
For Motorola Moto G31 Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$11.78
-
For Motorola Moto G 5G Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$12.32
-
For TCL 10L / 10 Lite OEM Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$7.93
-
For TCL 20 XE OEM Charging Port Board
1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
$7.91
-
10 PCS Back Camera Lens for Realme C55
1. Replacement back camera lens for Realme C55. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
$9.27
-
Type-C Charging Port Connector For Lenovo Yoga 6-13ARE05 6-13ALC6
1. Laptop Type-C charging port connector replacement part.2. Replace your broken or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We are not responsible for any damage caused during installation.
$8.59
-
For Canon PowerShot SX740 HS Original LCD Display Screen
Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed
$69.79
-
JAKEMY JM-8194 Precision Screwdriver Pen Set
1. All the screwdriver bits equipped hiding inside the handle. Equipped with tight rubber ring to seal the bits storage at any time as well, protacting the bits not easy to rust. Really make full use of the space, small and delicate.2. Practical detail design with precision CNC manufacturing. Stylish and burst with texture.3. Equipped with two-way module according to the ratchet principle, easy to use.4. Built-in high-precision bearings for a smooth rotation at every turn.5. SUS316 stainless steel casting is used for the joints, which is strong and powerful.6. Multi-use mode to meet multi-scene use.7. Accessories:- 1 x Screwdriver handle- Flat-head (Slotted): 1.5 / 2.0- Phillips: 1.5 / 2.0
$20.83
-
HB3665D2EBC 4360mAh Battery Replacement For Huawei Ascend P8 Max DAV-703L DAV-713L
1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water
$13.71
-
26S1006 Battery Replacement
1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water
$13.76
-
821-03871-02A LCD Screen Cover Angle Sensor Sleep Cable for MacBook Air Retina 13.6 M2 A2681 2022 EMC4074
1. 821-03871-02A LCD screen cover angle sensor sleep cable for MacBook Air Retina 13.6 M2 A2681 2022 EMC4074. 2. Replace your broken or unworkable part with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
$21.11
-
26S1021 Battery Replacement
1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water
$13.76
-
821-03668-03 Charging Port For MacBook Air Retina 13.6 M2 A2681 2022
1. Replacement charging port for MacBook Air Retina 13.6 M2 A2681 2022. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.
$15.59
-
HB3873E2EBC 5000mAh Battery Replacement For Huawei Mediapad Honor X1 X2
1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water
$13.71
-
821-03208-A LCD Screen Cover Angle Sensor Sleep Cable for MacBook Pro Retina 14 M1 A2442 EMC3650 2021
1. 821-03208-A LCD screen cover angle sensor sleep cable for MacBook Pro Retina 14 M1 A2442 EMC3650 2021. 2. Replace your broken or unworkable part with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
$18.68
-
For DJI MAVIC 2 Enterprise External Expansion Interface Cover Upper Shell
1. Real machine mold opening, precise matching2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI MAVIC 2 Enterprise5. For repair parts that need accidental damage replacement6. Long life and easy installation7. Material: plastic
$13.26
-
Laptop Touchpad For Lenovo ThinkPad X395 20NL 20NM T490s 20NX 20NY X390 20Q0 20Q1 T495s 20QJ 20QK E14 20RA 20RB X390 20SC 20SD (Black)
1. Laptop touchpad replacement part. 2. Replace your broken or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We are not responsible for any damage caused during installation.
$28.42
-
Laptop Touchpad With Flex Cable For Lenovo Thinkpad X1 Carbon 6th GEN 20KG 20KH (Black)
1. Laptop touchpad replacement part. 2. Replace your broken or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We are not responsible for any damage caused during installation.
$28.88
