Computer Components

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 612. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. Copper core motor, strong wind, fast heat dissipation, safe and durable2. Low noise, long life, low energy consumption, large air volume, stable operation, fast start3. High-strength and high-toughness fan blade, one-time injection molding, long service life, not easy to deform and break; not only has strong wind power but also effectively reduces noise4. The metal shell is strong and durable, with the characteristics of anti-drop, corrosion resistance, oxidation resistance, high temperature resistance, etc.; it can be used in high temperature environment for a long time, with stable performance5. Scope of application: heat dissipation of mechanical equipment6. Applicable temperature: -10 to 60 degrees Celsius7. Noise: 35DB8. Number of blades: 69. Voltage: 110V/220V10. Lead length: 25cm11. Speed: 2500R/MIN12. Motor power: 18W13. Current: 0.1/0.15A14. Bearing: double ball/oil15. Blade diameter: 80MM16. Blade material: PVC plastic17. Outer frame material: black painted metal18. Product life: 60000 hours19. Frequency: 50/60HZ20. Air volume: 0.85/1 cubic meter/minute21. Wind pressure: 4.6/5.2MMH2022. Size: 92 x 92 x 25MM23. Weight: 280GDifference:- Ball bearing: the model is generally indicated by B; there are several tiny steel balls in the bearing that rotate around the axis in the form of rolling friction, so the friction force is small and there is no oil leakage. Features: long life, suitable for high speed fans- Oil bearing: the model is generally indicated by S; it adopts a sliding friction sleeve, and the shaft of the fan blade uses lubricating oil in the sleeve as a lubricant and a drag reducer. Features: Resistance to external impact, low noise

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 212. Color light/blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Lantern/blue light width: 98MM, red light width: 110MM

Read more less

1. All-copper movement, strong air flow, durable, high speed stability2. Pure copper wire movement, high temperature resistance, stable operation and long life3. High-strength and thickened fan blades. The fan blades adopt a one-time injection molding process, which is not easy to deform and break. The unique design of the fan blades makes the contact area larger, the air volume is larger, and the heat dissipation effect is good.4. The outer frame is made of PVC plastic, which is resistant to high temperature and can withstand physical impact to a certain extent, effectively protecting the motor and fan blades5. Scope of application: heat dissipation of mechanical equipment6. Applicable temperature: -10 to 60 degrees Celsius7. Bearing: double ball/oil8. Motor power: 12V: 1.56W, 24V: 3.84W9. Voltage: 5V/12V/24V10. Current: 12V: 0.13A, 24V: 0.16A11. Air volume: 12V: 9CFM, 24V: 9.1CFM12. Speed: 12V: 4500R/MIN, 24V: 5000R/MIN13. Material: PVC plastic14. Product life: 60000 hours15. Size: 50x50x10MMDifference:- Ball bearing: the model is generally indicated by B; there are several tiny steel balls in the bearing that rotate around the axis in the form of rolling friction, so the friction force is small and there is no oil leakage. Features: long life, suitable for high speed fans- Oil bearing: the model is generally indicated by S; it adopts a sliding friction sleeve, and the shaft of the fan blade uses lubricating oil in the sleeve as a lubricant and a drag reducer. Features: Resistance to external impact, low noise

Read more less

1. Copper core motor, strong wind, fast heat dissipation, safe and durable2. Low noise, long life, low energy consumption, large air volume, stable operation, fast start3. High-strength and high-toughness fan blade, one-time injection molding, long service life, not easy to deform and break; not only has strong wind power but also effectively reduces noise4. The metal shell is strong and durable, with the characteristics of anti-drop, corrosion resistance, oxidation resistance, high temperature resistance, etc.; it can be used in high temperature environment for a long time, with stable performance5. Ball bearing: The model is generally indicated by B; there are several tiny steel balls in the bearing that rotate around the axis in the form of rolling friction, so the friction force is small and there is no oil leakage. Features: long life, suitable for high speed fans6. Applicable temperature: -10 to 60 degrees Celsius7. Scope of application: heat dissipation of mechanical equipment8. Motor power: 65W9. Voltage: 110/220/380V10. Current: 0.45A11. Air volume: 12 cubic meters per minute12. Speed: 2500R/MIN13. Blade material: PVC plastic14. Outer frame material: black painted metal15. Product life: 60000 hours16. Bearing: double ball17. Frequency: 50/60HZ18. Wind pressure: 19MMH2019. Size: 200 x 200 x 60MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 612. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 612. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 612. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 412. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 412. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. The total height from the bottom of the radiator to the top of the heat pipe is 135MM, no need to worry about blocking it, suitable for large components such as North Bridge/memory2. The fan runs at full speed, the wind is strong and the heat dissipation is good3. Support all series of AMD computer/AMD universal radiator4. AMD does not need to install other brackets, just buckle the bracket that comes with the AMD motherboard5. Noise: 22DB6. Speed: 2000R/MIN7. Bearing type: hydraulic bearing8. Material: Copper-aluminum combination9. Heat dissipation method: heat pipe10. Service life: 50000H11. Number of heat pipes: 412. Blue light length: single fan: 95MM, double fan: 115MM, red light length: single fan: 67MM, double fan: 88MM13. Blue light width: 98MM, red light width: 110MM

Read more less

1. Copper core motor, strong wind, fast heat dissipation, safe and durable2. Low noise, long life, low energy consumption, large air volume, stable operation, fast start3. High-strength and high-toughness fan blade, one-time injection molding, long service life, not easy to deform and break; not only has strong wind power but also effectively reduces noise4. The metal shell is strong and durable, with the characteristics of anti-drop, corrosion resistance, oxidation resistance, high temperature resistance, etc.; it can be used in high temperature environment for a long time, with stable performance5. Scope of application: heat dissipation of mechanical equipment6. Applicable temperature: -10 to 60 degrees Celsius7. Noise: 44DB8. Frequency: 50/60HZ9. Voltage: 220V10. Lead length: 25cm11. Speed: 2600R/MIN12. Motor power: 25W13. Current: 0.14A14. Bearing: oily15. Blade diameter: 110MM16. Blade material: PVC plastic17. Outer frame material: black painted metal18. Product life: 60000 hours19. Wind pressure: 6.8MMH2020. Air volume: 2.58CFM21. Size: 120 x 120 x 38MM22. Weight: 350G

Read more less

1. CPU: Intel apollo n33502. Frequency: up to 2.4GHz3. System: genuine Windows 104. Storage: 4G+64G5. Display: HDMI x 26. CPU main frequency: 1.1-2.4GHz7. 4 USB3.08. Support Bluetooth 4.09. Frequency: 1600MHz10. Reading speed: 400M/s11. 2.4G+5.8G dual-band WIFI12. Network: support Gigabit network13. Support Linux systemCan support daily office work, such as WORD, EXCEL, PDF14. Dual-screen display, more efficient and trouble-free work15. With silent cooling fan, efficient cooling16. 4K high-definition output display, enjoy home theater17. Weight: 232 grams18. Thickness: 18mm19. Dimensions: 106x106mm20. Accessories: power supply, HD cable, quick guide

Read more less

1. CPU: Intel apollo n33502. Frequency: up to 2.4GHz3. System: genuine Windows 104. Storage: 4G+64G5. Display: HDMI x 26. CPU main frequency: 1.1-2.4GHz7. 4 USB3.08. Support Bluetooth 4.09. Frequency: 1600MHz10. Reading speed: 400M/s11. 2.4G+5.8G dual-band WIFI12. Network: support Gigabit network13. Support Linux systemCan support daily office work, such as WORD, EXCEL, PDF14. Dual-screen display, more efficient and trouble-free work15. With silent cooling fan, efficient cooling16. 4K high-definition output display, enjoy home theater17. Weight: 232 grams18. Thickness: 18mm19. Dimensions: 106x106mm20. Accessories: power supply, HD cable, quick guide

Read more less

1. CPU: Intel apollo n33502. Frequency: up to 2.4GHz3. System: genuine Windows 104. Storage: 4G+64G5. Display: HDMI x 26. CPU main frequency: 1.1-2.4GHz7. 4 USB3.08. Support Bluetooth 4.09. Frequency: 1600MHz10. Reading speed: 400M/s11. 2.4G+5.8G dual-band WIFI12. Network: support Gigabit network13. Support Linux systemCan support daily office work, such as WORD, EXCEL, PDF14. Dual-screen display, more efficient and trouble-free work15. With silent cooling fan, efficient cooling16. 4K high-definition output display, enjoy home theater17. Weight: 232 grams18. Thickness: 18mm19. Dimensions: 106x106mm20. Accessories: power supply, HD cable, quick guide

Read more less

1. CPU: Intel apollo n33502. Frequency: up to 2.4GHz3. System: genuine Windows 104. Storage: 4G+64G5. Display: HDMI x 26. CPU main frequency: 1.1-2.4GHz7. 4 USB3.08. Support Bluetooth 4.09. Frequency: 1600MHz10. Reading speed: 400M/s11. 2.4G+5.8G dual-band WIFI12. Network: support Gigabit network13. Support Linux systemCan support daily office work, such as WORD, EXCEL, PDF14. Dual-screen display, more efficient and trouble-free work15. With silent cooling fan, efficient cooling16. 4K high-definition output display, enjoy home theater17. Weight: 232 grams18. Thickness: 18mm19. Dimensions: 106x106mm20. Accessories: power supply, HD cable, quick guide

Read more less

1. With the popularity of USB3.0, you can insert this adapter card on the motherboard with PCI-E slot and install the driver to expand 7 USB3.0 ports! It can satisfy you to copy data with 7 USB3.0 devices2. This product is a desktop PCI-E expansion card. It needs to have a free PCI-E slot on the motherboard before it can be installed and used. It is also necessary to make sure that the slot is not blocked by the graphics card. Otherwise, it cannot be installed and used on the PCI slot. , Do not insert it into the PCI slot.Features:1. No external power supply design, using two 6A high-power DC-DC to ensure USB power supply2. The expansion card uses 10 high-performance solid capacitors, which greatly ensures the stability of the USB power supply.3. Because this card has 7 ports on the rear, it does not support small chassis.4. Each USB port uses a self-recovery insurance5. Compliant with PCI-Express Specification Version 2.06. Compliant with USB3.0 SuperSpeed Specification Version 1.07. Compliant with xHCI specification version 1.08. Backward compatible with USB2.0, USB1.1, USB1.09. Transmission rate: 5000/480/12/1.5Mbps10. USB power output: up to 5V 1.5A (increased current type)11. Support USB hot plug functionParameter:1. Output interface: 7 ports USB3.2 GEN1 19PIN2. Main control chip: RENESAS D720201+7202103. Interface rate: 5Gbps4. Support slot: PCI-E 1X5. PCB color: black6. Support system: WINXP/WIN7/8/10/11/LINUX

Read more less

1. With large heat sink, durable high temperature resistance, more stable operation2. Plug and play without driver, support mainstream Windows, Linux, NAS, Synology, support SATA hard disk/optical drive/SSD solid state drive3. LED monitoring indicator: The blue light is always on when the hard disk is inserted, and the blue light flashes when reading data, monitoring the working status of the hard disk at any time4. Support PCI-E 1X 4X/8X/16X interface5. PCB board color: black6. Interface rate: 6Gbps7. Main control chip: ASMedia ASM1166+JMicron JMB5xx8. System support: Win8 WIN10 LINUX

Read more less

1. This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebook’s own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)2. Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the functionFeatures:1. The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.2. The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.3. The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.4. The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.5. The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.6. The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.Parameter:1. Wire length: 60CM2. Product interface: PCI-E 1X PCI-E 16X3. Support system: Compatible with all WINDOWS systems, LINUX MAC4. Product packaging: static bag

Read more less

1. With large heat sink, durable high temperature resistance, more stable operation2. Plug and play without driver, support mainstream Windows, Linux, NAS, Synology, support SATA hard disk/optical drive/SSD solid state drive3. LED monitoring indicator: The blue light is always on when the hard disk is inserted, and the blue light flashes when reading data, monitoring the working status of the hard disk at any time4. Support PCI-E 1X 4X/8X/16X interface5. PCB board color: black6. Interface rate: 6Gbps7. Main control chip: ASMedia ASM1166+JMicron JMB5xx8. System support: Win8 WIN10 LINUX

Read more less

1. With large heat sink, durable high temperature resistance, more stable operation2. Plug and play without driver, support mainstream Windows, Linux, NAS, Synology, support SATA hard disk/optical drive/SSD solid state drive3. LED monitoring indicator: The blue light is always on when the hard disk is inserted, and the blue light flashes when reading data, monitoring the working status of the hard disk at any time4. Support PCI-E 1X 4X/8X/16X interface5. PCB board color: black6. Interface rate: 6Gbps7. Main control chip: ASMedia ASM1166+JMicron JMB5xx8. System support: Win8 WIN10 LINUX

Read more less

1. This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebook’s own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)2. Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the functionFeatures:1. The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.2. The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.3. The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.4. The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.5. The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.6. The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.Parameter:1. Wire length: 60CM2. Product interface: PCI-E 1X PCI-E 16X3. Support system: Compatible with all WINDOWS systems, LINUX MAC4. Product packaging: static bag

Read more less

1. This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebook’s own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)2. Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the functionFeatures:1. The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.2. The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.3. The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.4. The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.5. The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.6. The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.Parameter:1. Wire length: 60CM2. Product interface: PCI-E 1X PCI-E 16X3. Support system: Compatible with all WINDOWS systems, LINUX MAC4. Product packaging: static bag

Read more less

1. Connect the M.2 hard disk defined by KEY-B-M SATA on the motherboard to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. Support all SATA standard M2.SSD, do not support NVME M2.SSD, do not support PCI-E M2 SSD3. This card is suitable for 4 different SSD hard disk lengths, suitable for different M2 (NGFF) SSD hard disk lengths such as 3cm, 4.2cm, 6cm, and 8cm.Using ceramic filter capacitors, high-power LDO voltage regulator control chip, stable performanceThe riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Product interface: M.2 NGFF SATA 22PINSupport system: WinXP/Vista/Win7/Win8 32-bit/64-bit MAC/LINUXNote: The product is only a riser card, not including a hard disk

Read more less

1. With large heat sink, durable high temperature resistance, more stable operation2. Plug and play without driver, support mainstream Windows, Linux, NAS, Synology, support SATA hard disk/optical drive/SSD solid state drive3. LED monitoring indicator: The blue light is always on when the hard disk is inserted, and the blue light flashes when reading data, monitoring the working status of the hard disk at any time4. Support PCI-E 1X 4X/8X/16X interface5. PCB board color: black6. Interface rate: 6Gbps7. Main control chip: ASMedia ASM1166+JMicron JMB5xx8. System support: Win8 WIN10 LINUX

Read more less

1. Using the main control: ASMedia ASM10612. Bus interface: PCI-Express x1 slot3. Expansion interface: 2 SATA3.0 interfaces4. System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X165. Support system: WinXP/Vista/7/8/10/11/32-bit/64-bit LINUX6. Conform to Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.07. Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.8. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps9. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i10. Support two SATA11. Support AHCI1.0 mode and IDE mode12. Support Native Command Queuing (NCQ)13. Support FIS based on port multiplier switch or command switch.Support hot swap14. Compatible with SATA6G, 3G and 1.5G hard drivesThe usage method of PCIE to SATA3.0 adapter card is as follows:1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to insert a system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard, otherwise it will not pass Our card riser cards enable the system.2. If it is confirmed that the system disk is inserted into the SATA interface on the motherboard and the installation system is in AHCI mode, then you can directly insert the hard disk into our card, then enter the motherboard BIOS and set the system disk as the first boot.3. Both of the above conditions are met. If it still fails to start, or restarts repeatedly, then it may be caused by a conflict between the hard disk interface of the motherboard and our adapter card. The solution is to enter the BIOS of the motherboard and set the hard disk interface option of the motherboard to Disabled, save and restart to start the system

Read more less

1. Connect the M.2 hard disk defined by KEY-B-M SATA on the motherboard to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. Support all SATA standard M2.SSD, do not support NVME M2.SSD, do not support PCI-E M2 SSD3. This card is suitable for 4 different SSD hard disk lengths, suitable for different M2 (NGFF) SSD hard disk lengths such as 3cm, 4.2cm, 6cm, and 8cm.Using ceramic filter capacitors, high-power LDO voltage regulator control chip, stable performanceThe riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Product interface: M.2 NGFF SATA 22PINSupport system: WinXP/Vista/Win7/Win8 32-bit/64-bit MAC/LINUXNote: The product is only a riser card, not including a hard disk

Read more less

1. Connect the M.2 hard disk defined by KEY-B-M SATA on the motherboard to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. Support all SATA standard M2.SSD, do not support NVME M2.SSD, do not support PCI-E M2 SSD3. This card is suitable for 4 different SSD hard disk lengths, suitable for different M2 (NGFF) SSD hard disk lengths such as 3cm, 4.2cm, 6cm, and 8cm.Using ceramic filter capacitors, high-power LDO voltage regulator control chip, stable performanceThe riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Product interface: M.2 NGFF SATA 22PINSupport system: WinXP/Vista/Win7/Win8 32-bit/64-bit MAC/LINUXNote: The product is only a riser card, not including a hard disk

Read more less

1. With large heat sink, durable high temperature resistance, more stable operation2. Plug and play without driver, support mainstream Windows, Linux, NAS, Synology, support SATA hard disk/optical drive/SSD solid state drive3. LED monitoring indicator: The blue light is always on when the hard disk is inserted, and the blue light flashes when reading data, monitoring the working status of the hard disk at any time4. Support PCI-E 1X 4X/8X/16X interface5. PCB board color: black6. Interface rate: 6Gbps7. Main control chip: ASMedia ASM1166+JMicron JMB5xx8. System support: Win8 WIN10 LINUX

Read more less

1. This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebook’s own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)2. Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the functionFeatures:1. The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.2. The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.3. The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.4. The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.5. The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.6. The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.Parameter:1. Wire length: 60CM2. Product interface: PCI-E 1X PCI-E 16X3. Support system: Compatible with all WINDOWS systems, LINUX MAC4. Product packaging: static bag

Read more less

1. The baffle has an outlet slot, and when the external and internal adapter cards are installed, the PCIE signal is directly led out without switching, ensuring high signal integrity.2. The power indicator adopts blue LED, which can emit blue light after power on, making the whole more beautiful3. Turn out two PCI slots through the PCI-E slot. Similar products only support one PCI slot, and also support dual PCIs working at the same time.4. There is no need for additional power supply when the power is lower than 16W, and there is SATA on the board to strengthen the power supply, which is more flexible to use.5. PCI slot power supply is filtered by solid capacitor, which can work in high temperature and low temperature environmentParameter:1. Interface: motherboard side PCI-E 1X (compatible with 1X 4X 8X 16X)2. Product rate: PCI-E 1.03. Main control chip: ASM10834. System support: WINXP WIN7 WIN8 WIN10 WIN11Note: The USB cable cannot be connected to the USB interface, and must be connected to the supporting small board

Read more less

Feature: 1. Supports 6-port 6.0Gbps SATA III interface 2. Output swing control and automatic impedance calibration for SATA III PHY. 3. Supports asynchronous signal recovery. 4. Supports spread spectrum clocking. 5. Supports partial / slumber power saving mode. 6. Automatically speed negotiation. 7. Supports BIST and loopback mode. 8. Supports staggered spin-up (Optional). 9. Supports Hot-Plug. 10. Supports asynchronous notification. 11. Supports ATAPI drives. 12. Supports command-based and FIS-based swit. Specification: Product name: SATA3.0 1 to 5 expansion card Product master: JMICRON JMB575 Product interface: SATA 7PIN Support system: for WINXP, WIN7, WIN8, WIN10 Warm Tips: 1. This extension card must support the PM (SATA PORT MULTIPLIER) function of the motherboard or the extension card to recognize 5 hard disks. 2. The main motherboard SATA does not support this function. If it is not supported, only one card can be recognized. 3. You must plug in the SATA or DC2.5 power supply to the expansion card. Include: 1 x SATA Expansion Card 1 x USB-DC Power Cable

Read more less

1. Function: The mainboard USB2.0 9PIN to TYPE-C front TYPE-E 20PIN is firmly installed on the PCI bracket to help you easily connect to Type-C interface devices.2. It is easy to connect and install, it is just an expansion port, no need to install drivers.3. Support system: Compatible with all motherboards with USB 2.0 header port, suitable for all Windows and Linux systems. Need motherboard or expansion card with 9PIN socket and chassis with TYPE-E cable4. The input signal is SuperSpeed USB 2.0 5Gbps, and the connection speed will be limited to a maximum of 5Gbps. Because it is a 9PIN USB2.0 rate, it can only transfer out the USB2.0 rate, and cannot increase the speed.5. Interface: USB2.0 9PIN USB3.2 Type-E

Read more less

1. The baffle has an outlet slot, and when the external and internal adapter cards are installed, the PCIE signal is directly led out without switching, ensuring high signal integrity.2. The power indicator adopts blue LED, which can emit blue light after power on, making the whole more beautiful3. Turn out two PCI slots through the PCI-E slot. Similar products only support one PCI slot, and also support dual PCIs working at the same time.4. There is no need for additional power supply when the power is lower than 16W, and there is SATA on the board to strengthen the power supply, which is more flexible to use.5. PCI slot power supply is filtered by solid capacitor, which can work in high temperature and low temperature environmentParameter:1. Interface: motherboard side PCI-E 1X (compatible with 1X 4X 8X 16X)2. Product rate: PCI-E 1.03. Main control chip: ASM10834. System support: WINXP WIN7 WIN8 WIN10 WIN11Note: The USB cable cannot be connected to the USB interface, and must be connected to the supporting small board

Read more less

1. The baffle has an outlet slot, and when the external and internal adapter cards are installed, the PCIE signal is directly led out without switching, ensuring high signal integrity.2. The power indicator adopts blue LED, which can emit blue light after power on, making the whole more beautiful3. Turn out two PCI slots through the PCI-E slot. Similar products only support one PCI slot, and also support dual PCIs working at the same time.4. There is no need for additional power supply when the power is lower than 16W, and there is SATA on the board to strengthen the power supply, which is more flexible to use.5. PCI slot power supply is filtered by solid capacitor, which can work in high temperature and low temperature environmentParameter:1. Interface: motherboard side PCI-E 1X (compatible with 1X 4X 8X 16X)2. Product rate: PCI-E 1.03. Main control chip: ASM10834. System support: WINXP WIN7 WIN8 WIN10 WIN11Note: The USB cable cannot be connected to the USB interface, and must be connected to the supporting small board

Read more less

1. Material: aluminum2. Bearing type: alloy bearing3. Applicable brand model: for Panhong PH444. All-aluminum heat sink is used for efficient heat dissipation and equipped with 8 high-quality capacitors to provide stable and safe power for the fan5. Guarantee the stable operation of the SSD, and will not cause the transmission speed of the SSD to drop due to excessive temperature6. Dimensions: about 130 x 80 x 7mm7. Weight: about 148.8g

Read more less

1. Product function: convert the motherboard USB3.0 19PIN to TYPE-C front TYPE-E 20PIN2. Product interface: USB3.0 19PIN USB3.1 TYPE-E3. Support system: Any system that can support USB3.0 can be used, and the main board or expansion card with 19PIN socket and the chassis with TYPE-E cable are required4. Precautions: Since 19PIN is GEN1 5Gbps rate, so only 5Gbps rate is transferred out, and the speed cannot be increased5. Compatible with all Windows and Linux systems.

Read more less

1. Product function: convert the motherboard USB3.0 19PIN to TYPE-C front TYPE-E 20PIN2. Product interface: USB3.0 19PIN USB3.1 TYPE-E3. Support system: Any system that can support USB3.0 can be used, and the main board or expansion card with 19PIN socket and the chassis with TYPE-E cable are required4. Precautions: Since 19PIN is GEN1 5Gbps rate, so only 5Gbps rate is transferred out, and the speed cannot be increased5. Compatible with all Windows and Linux systems.

Read more less

1. SATA2.0 1-to-5-port adapter card: Provides a SATA host and 5 SATA device interfaces, and supports hot swapping. The host computer terminal (Host) must be supported by a motherboard or an expansion card with SATA port multiplication function.2. DC jack that provides DC power input.3. Operating system support: support SATA 1.5Gbps and 3.0Gbps auto-negotiation.4. Suitable for Windows 7 / XP / Vista / 8 / 10 etc.5. Chip: JMB321Precautions:1. This expansion card must support the PM (SATA PORT MULTIPLIER) function on the motherboard or the expansion card to recognize 5 hard disks. The general motherboard SATA does not support this function. If not supported, only one card can be recognized.2. To use, the SATA or DC2.5 power supply must be plugged in to supply power to the expansion card3. SATA2.0 version does not have plug-in display and read/write indicator LED lights

Read more less

1. Thickened gold-plated gold fingers, more stable transmission2. Multiple SATA3.0 expansion cards can be installed on the same computer and work at the same time to achieve multiple simultaneous reading3. The system comes with soft RAID and supports 4 storage modes4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Using the JMB585 chip solution, high-speed transmission and stable performance, dedicated to meeting the needs of users for massive data space6. LED working indicator light, the SATA device is connected normally, the indicator light is always on, and the indicator light flashes when data exchange is in the state of reading and writing7. System: Mac OS/Windows/Linux8. Product interface: support PCI-E X4 (compatible with X8 X16)9. Output interface: SATA3.0 x 510. Weight: about 46.6g11. Size: about 12 x 8cm

Read more less

1. Lossless transfer, high-speed transmission, stable and compatible2. This product is limited to desktop computers with standard M.2M-KEY slots (cannot be used for MSATA slots, nor for mini pci-e wireless network card slots, must be standard mini pci-e slots), Laptop not applicable3. High gold plating: strong oxidation resistance, good conductivity, wear resistance4. Device indicator light: the connection is normal, the device is powered on, and the indicator light is on5. Supports 4 length specifications, and can be cut according to the scissors pattern according to the required specification length6. External graphics card and PCle device can be installed7. Number of interfaces: M.2 SATA mobile hard disk adapter card8. Product accessories: lock plate screw + screwdriver9. Number of interfaces: USB3.0 (PCle protocol)10. Applicable slot: M.2 M KEY11. Total bandwidth: PCle GEN3 X1 8Gb/s12. Function: transfer, expansion, expansion13. Size: 80 x 22mm14. Weight: 11g

Read more less

1. Connect the KEY-B-M SATA definition of the motherboard or the MSATA hard disk to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. The riser card is suitable for 4 different SSD hard disk lengths, suitable for 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF) SSD hard disk lengths and full-height MSATA hard disks.3. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance.4. The riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Parameter:1. Product interface: SATA 22PIN male2. PCB color: black PCB3. Product rate: 20Gbps/10Gbps4. Support protocol: MSATA or M2 NGFF SATA, cannot be used at the same time5. Main control chip: switch with switch6. System support: WIN7/WIN8/WIN10/WIN11/MAC/LINUXPrecautions:1. Support all SATA standard M.2 SSD, do not support NVME M.2 SSD, do not support PCI-E M2 SSD2. MSATA and M2 cannot be used at the same time, and the MSATA and M2 disks must be switched through a switch.

Read more less

1. Connect the KEY-B-M SATA definition of the motherboard or the MSATA hard disk to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. The riser card is suitable for 4 different SSD hard disk lengths, suitable for 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF) SSD hard disk lengths and full-height MSATA hard disks.3. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance.4. The riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Parameter:1. Product interface: SATA 22PIN male2. PCB color: black PCB3. Product rate: 20Gbps/10Gbps4. Support protocol: MSATA or M2 NGFF SATA, cannot be used at the same time5. Main control chip: switch with switch6. System support: WIN7/WIN8/WIN10/WIN11/MAC/LINUXPrecautions:1. Support all SATA standard M.2 SSD, do not support NVME M.2 SSD, do not support PCI-E M2 SSD2. MSATA and M2 cannot be used at the same time, and the MSATA and M2 disks must be switched through a switch.

Read more less

1. This adapter card can convert the PCIe interface on the motherboard to a USB3.2 Type-C high-speed data transmission interface, and the theoretical transmission speed can reach 20Gbps.2. This expansion card belongs to the USB3.2 GEN2 x 2 standard and is backward compatible with USB3.0 and USB2.03. USB3.2 is a 4X interface, which can be inserted into 4X 8X 16X slots4. To achieve 20Gbps high speed, the motherboard must support PCI-E 3.0 4X, and the hard disk box and TYPE-C cable must also be 20Gbps5. The system only supports systems above WIN10/11, use the system's own driver, no need to install it separately6. Material: PCB+metal7. Main control chip: ASMedia ASM32428. Product interface: single port Type-C9. Support system: WIN10 / WIN11 32/64 BIT / MAC / Linux

Read more less

1. Compliant with Serial ATA Specification 3.0, backward compatible with SATA2.0 and SATA1.0.2. Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.3. Support communication speeds of 6.0Gbps, 3.0Gbps and 1.5Gbps.4. Supports Gen 1i, Gen 2i, Gen 2m, Gen 2x and Gen 3i.5. Support two SATA interfaces.6. Support AHCI 1.0 and IDE mode.7. Support local command queue (NCQ)8. Support switching based on Port Multiplier FIS or switching based on command.9. Support hot swap.10. Compatible with SATA 6G, 3G, 1.5G hard drivesSpecification:1. Product interface: PCI-E 1X 4X 8X 16X2. Chip: JMB5823. Supported specifications: SATA3.0 7PIN4. Bus interface: PCI-Express X1 slot5. Expansion interface: 2 SATA3.0 interfaces6. System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X167. Operating system: Windows10/8/7 (32/64 bit)/Vista (32/64 bit)/XP/2003/2008/linux

Read more less

1. No external power supply, plug and play, more stable2. The 4 USB cables are routed in the same direction, the routing is neat and not messy3. It can be expanded to 4 PCI-E, effectively solving the insufficient PCI-E interface4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Number of interfaces: PCI-E X1 interface x 46. Product interface: support PCI-E X1 (compatible with X4 X8 X16)7. System: Mac OS/Windows/Linux8. Dimensions: about 65 x 55mm9. Weight: about 45.8g

Read more less

1. No external power supply, plug and play, more stable2. The 4 USB cables are routed in the same direction, the routing is neat and not messy3. It can be expanded to 4 PCI-E, effectively solving the insufficient PCI-E interface4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Number of interfaces: PCI-E X1 interface x 46. Product interface: support PCI-E X1 (compatible with X4 X8 X16)7. System: Mac OS/Windows/Linux8. Dimensions: about 65 x 55mm9. Weight: about 45.8g

Read more less

1. This product is used to remotely start/shut down/restart the computer, and it can fully control the computer with third-party remote desktop software.2. After installation, it will not affect the use of the chassis buttons, and the chassis buttons can be locked at any time to prevent others from switching on and off your computer3. The power-on card is connected to WIFI. When using it for the first time, configure it once with the control terminal (such as the mobile phone terminal). Automatically reconnect when disconnected4. The same user can bind multiple power-on cards, and can share their own cards with other users, and can be shared with multiple users for control, which is flexible and convenient.5. Main functions: computer power on and off, reset, temperature detection, fan speed test, forced shutdown, timer power on and off, automatic power on when incoming calls6. Network standard: 2.4G (5G network is not supported)7. Input interface: PCI-E 1X8. Support slots: PCI-E 1X 4X 8X 16X9. Product module: TUYA10. Support system: all systems

Read more less