Consumer Electronics

1. Single diaphragm, compact capacitive type 2. Pickup mode: cardioid pointing mode, -10dB cardioid pointing mode 3. USB plug and play, no driver required, compatible with Mac/PC 4. Spherical design, full of style 5. Sturdy adjustable microphone stabilization stand 6. Recording resolution: 16bit, 44.1KHz 7. Output mode: USB digital output

Read more less

1. Double diaphragm capsule design, clear and high sensitivity, low noise and low distortion 2. Three pickup modes: cardioid pointing mode, -10dB cardioid pointing mode, omnidirectional mode 3. USB plug and play, no driver required, compatible with Mac/PC 4. Spherical design, full of style 5. Sturdy adjustable microphone stabilization stand 6. Frequency response: 40-18KHz 7. Output mode: USB digital output

Read more less

1. Four pickup modes: cardioid, omnidirectional, bidirectional, omnidirectional 2. Power/power consumption: 62mA-203mA 3. Sampling rate: 48KHz 4. Diaphragm cabin: four Blue proprietary 14 mm capacitive diaphragm cabins 5. Microphone frequency response: 20Hz-20KHz 6. Bit rate: 24 bit 7. Sound pressure level: 122dB 8. Headphone amplifier impedance: 13ohms (low), 16ohms (conventional) 9. Headphone amplifier signal-to-noise ratio: 100dB 10. Headphone amplifier frequency response: 20Hz-20KHz 11. Size: 11x12.2x28.9cm

Read more less

1. Sensor type: pressure gradient, capacitance 2. Pointing: Heart-shaped 3. Frequency response: 20Hz-20KHz 4. Rated impedance: 50 Ohms 5. Recommended load impedance: greater than 1K ohms 6. Sensitivity: 34.9mV/Pa (@1Khz) 7. Signal to noise ratio: 73dB-A (IEC 651) 8. Background noise: 16.4dB-A (IEC 651) 9. Dynamic range: 119.6dB (@2.5K ohms) 10. Volume attenuation switch: -20dB 11. Size: 22x4.5cm 12. Weight: 336g

Read more less

1. Two pickup modes: cardioid mode, omnidirectional mode 2. The USB interface is plug and play, no driver is required 3. High purity brazed steel mesh head 4. Multi-function indicator aperture 5. Built-in shock-absorbing silicone knob 6. Anti-rust paint metal base 7. Power/power consumption: 5V, 50.5mA 8. Sampling rate: 32KHz, 44.1KHz and 48KHz 9. Bit rate: 16 and 24bit 10. Microphone frequency response: 20Hz-20KHz 11. Sound pressure level: 110dB 12. Diaphragm cabin: two Blue 14mm condenser diaphragm cabins 13. Microphone sensitivity: -37dB 14. Headphone amplifier impedance: greater than 13 Ohms 15. Headphone amplifier frequency response: 20Hz-20KHz 16. Size: 10.9x9.6x21.1cm 17. Weight: 630g

Read more less

1. Pickup mode: stereo, cardioid, omnidirectional, bidirectional 2. Bit rate: 16bit 3. Sampling rate: 48KHz 4. Diaphragm cabin: 3 Blue proprietary 14mm capacitive diaphragm cabins 5. Sensitivity: 4.5mV/Pa (1KHz) 6. Frequency response: 20Hz-20KHz 7. Sound pressure level: 120dB 8. Impedance: greater than 16 Ohms 9. Signal to noise ratio: 100dB 10. Output power: 130mW 11. Frequency response of headphone amplifier: 15Hz-22KHz

Read more less

1. Sensitivity: -46dB+/-3dB 2. Directivity: omnidirectional and cardioid can be switched 3. Impedance: less than or equal to 2.2K ohm 4. Power supply voltage USB 4.5-5V DC 5. Frequency response: 20Hz-20KHz 6. Signal-to-noise ratio: greater than 36dB 7. Cable length: 1.8M 8. The joint of the microphone and the tripod adopts a universal shaft structure design, which can easily adjust the angle of use 9. The rear design of the TYPE-C interface does not interfere with the tripod when rotating, and the design on the right side of the headphone interface is more convenient to use 10. Colorful gradient breathing light can create a gaming atmosphere 11. Material: Metal 12. Size: about 215x46mm

Read more less

1. The hole position is accurate and does not block the signal2. Material: Silicone3. Size: 101x139mm4. Weight: 90g (one set)5. Specifications: a set contains 26. Wearing method: handheld7. Packing list: protective sleeve + strap

Read more less

1. The hole position is accurate and does not block the signal2. Material: Silicone3. Size: 101x139mm4. Weight: 90g (one set)5. Specifications: a set contains 26. Wearing method: handheld7. Packing list: protective sleeve + strap

Read more less

1. Working voltage: AC/DC 9 v-30v2. Channel: 23. Working frequency: 300MHz, 310MHz, 315MHz, 318MHz, 390MHz, 433.4MHz, 433MHz, 433.92MHz, 868MHz, 868.8MHz4. Distance: about 30-50m5. Uses: garage doors, gates, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products, alarm systems, etc.

Read more less

1. Digital 2.4 GHz and automatic pairing: Adopt 2.4 GHz spectrum and synchronization technology to avoid UHF domain confusion and provide a safe, stable and simple audio system. It supports automatic connection of TX and RX after power-on, and the manual pairing operation is simple.2. 50m transmission and DSP technology: transmit stable anti-interference signals, up to 164 feet/50 meters long distance (LOS), 12.5 milliseconds low latency. Integrate DSP technology, which can optimize audio instantly, efficiently post-processing and provide high-quality audio performance in live broadcast.3. Low-cut filter and mono/stereo output: 180Hz low-cut function can filter out specific low-frequency noise, such as wind and traffic noise, to obtain a clear sound output. There are mono/stereo modes to choose from, which is convenient for post-processing.4. Real-time monitoring and 4-level gain adjustment: The receiver has a 3.5mm TRS headphone jack, which can control the recording effect during real-time shooting. The 0-4 level receiver gain setting has an adjustment range of up to 8dB, which can optimize the signal level simply and effectively.5. Long working time and indicator light: Built-in 400mAh lithium battery, it can work for up to 8 hours after being fully charged.6. The receiver has a back clip, which can be connected to a mobile phone/SLR camera, etc.7. The transmitter has a back clip, supports built-in microphones and external lavalier microphones8. 360-degree omnidirectional pickup9. Weight: 35 grams10. Dimensions: 50 x 44 x 20 mm

Read more less

1. Digital 2.4 GHz and automatic pairing: Adopt 2.4 GHz spectrum and synchronization technology to avoid UHF domain confusion and provide a safe, stable and simple audio system. It supports automatic connection of TX and RX after power-on, and the manual pairing operation is simple.2. 50m transmission and DSP technology: transmit stable anti-interference signals, up to 164 feet/50 meters long distance (LOS), 12.5 milliseconds low latency. Integrate DSP technology, which can optimize audio instantly, efficiently post-processing and provide high-quality audio performance in live broadcast.3. Low-cut filter and mono/stereo output: 180Hz low-cut function can filter out specific low-frequency noise, such as wind and traffic noise, to obtain a clear sound output. There are mono/stereo modes to choose from, which is convenient for post-processing.4. Real-time monitoring and 4-level gain adjustment: The receiver has a 3.5mm TRS headphone jack, which can control the recording effect during real-time shooting. The 0-4 level receiver gain setting has an adjustment range of up to 8dB, which can optimize the signal level simply and effectively.5. Long working time and indicator light: Built-in 400mAh lithium battery, it can work for up to 8 hours after being fully charged.6. The receiver has a back clip, which can be connected to a mobile phone/SLR camera, etc.7. The transmitter has a back clip, supports built-in microphones and external lavalier microphones8. 360-degree omnidirectional pickup9. Weight: 35 grams10. Dimensions: 50 x 44 x 20 mm

Read more less

1. Material: carbon steel, ABS2. Suitable for: suitable for micro projectors within 3 kg3. Dimensions: Desktop version: 19.5 x 19.5 x 30 cm, floor standard version: 32.5 x 32.5 x 50 cm, floor lift version: 32.5 x 32.5 x 60 cm4. Carbon steel material, sturdy and durable, quality assurance5. It can be adjusted in 360 degrees, twisted tightly and wont fall off6. Large chassis, stable and not shaking, safe and secure7. Remarks: only the bracket is shipped, no others

Read more less

1. Applied to touch sensors such as buttons, sliders and wheels2. Application scenarios: car control panels, LCD TVs and monitors, notebook computers, mobile phones, etc.3. The single-chip microcomputer integrates Atmels AVR microcontroller, and includes 1KB to 4KB of flash memory, with 32 KB to 256 KB of SRAM4. The device supports SPI and TWI (I2C-compatible) communication, providing high flexibility and working voltage from 1.8V to 5.5V5. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used6. Size: 24x18mm7. Model: ATTINY85 MICRO blue board

Read more less

1. Shell material: ABS 2. Sensitivity: -47db 3. Color temperature: 6500K 4. Number of lamp beads: 36 5. Power: 5W 6. The microphone is powered by AAA battery, which is more convenient to use (without batteries) 7. The LED light is powered by 2 AA batteries (without batteries) or USB charging (750 mAh lithium battery) 8. Three levels of light adjustment, soft fill light 9. Mobile phone holder hot shoe design, expandable LED light and microphone light equipment, mobile phone holder range 5.6-8.3 cm 10. The tripod has a weight of 3 kg and a 1/4 standard screw port, which can be directly installed on the fill light and camera 11. The angle of the tripod can be adjusted freely at 120 degrees for easy composition 12. 36 high-brightness lamp beads, larger illumination angle 13. Multiple scenes and multiple angles can be used, freeing hands 14. Weight: 222.8g 15. Size: about 30x19.5 cm The package contains: Fill light x 1 Mobile phone holder x 1 Monopod x 1 Microphone x 1 Color box x 1 Remote control x 1

Read more less

1. Purpose: Digital power amplifier board2. Chip model: TPA31163. Input voltage: DC8-28V4. Output impedance: 4-82 ohm5. Output power: 2 x 120w6. Size: 83x60x25mm7. Weight: About 65gInstructions for use:1. Connect the power input terminal to a DC8-28V power supply. The recommended power supply is DC24V with a current of 6A, and the output power can reach 120W per channel.2. Connect the audio input terminal to the audio source, such as MP3, mobile phone, computer, etc.; it is recommended to connect the output terminal of the front power amplifier board3. Two audio output terminals are connected to two speakers respectively

Read more less

1. Shell material: ABS 2. Sensitivity: -47db 3. Color temperature: 6500K 4. Number of lamp beads: 36 5. Power: 5W 6. The microphone is powered by AAA battery, which is more convenient to use (without batteries) 7. The LED light is powered by 2 AA batteries (without batteries) or USB charging (750 mAh lithium battery) 8. Three levels of light adjustment, soft fill light 9. Mobile phone holder hot shoe design, expandable LED light and microphone light equipment, mobile phone holder range 5.6-8.3 cm 10. The tripod has a weight of 3 kg and a 1/4 standard screw port, which can be directly installed on the fill light and camera 11. The angle of the tripod can be adjusted freely at 120 degrees for easy composition 12. 36 high-brightness lamp beads, larger illumination angle 13. Multiple scenes and multiple angles can be used, freeing hands 14. Weight: 222.8g 15. Size: about 30x19.5 cm The package contains: Fill light x 1 Mobile phone holder x 1 Monopod x 1 Microphone x 1 Color box x 1 Remote control x 1

Read more less

1. USB mobile phone smart charging, RZC7512 charging control IC can identify the charging protocol and automatically switch the charging mode2. Support the power supply range of 9-36v, covering common 12v and 24v power supplies. Simply connect the module with a wire, and you can output a constant voltage of 5v as a 5v power supply. When using 220v AC, you can use a 12/24v transformer to convert the output first in the connection module3. Socket modification can install a small transformer inside the socket, and then connect the output wire to the module. If there is enough space inside the socket, you can open the socket to expose the output port of the module to the socket for easy use.4. The plug strip with USB socket also needs to be modified. The module comes with a charging identification chip, which can automatically switch the charging mode, and the charging efficiency is higher and safer.5. Output voltage: 5v6. Working voltage: 4.5-5.5v7. Input voltage: 9-36v8. Application scope: USB charging for electric car/motorcycle modification, car power modification, solar battery, portable USB charging, generator USB output, DIY application

Read more less

1. Get 51 Arduino STM32 microcontroller routine.2. With a USB interface, you can watch the computer positioning effect directly phone line.3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.4. With SMA interface can be directly connected to an active antenna SMA.5. TTL level, compatible with 3.3V/5V systems.(Size: 39 x 25.5mm)6. Frequency: 1575.42MHz7. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used

Read more less

1. Suitable for Dyson hair dryer, curling iron, hair straightener2. Optimized material, scratch-resistant and wear-resistant3. Large capacity design, easy to carry around4. The velvet lining is soft and delicate, which can protect the hair dryer well and reduce the damage to the fuselage caused by accidental bumps.5. Lanyard design, rational use of space6. Material: PU+human pattern material7. Shape: cube type8. Weight: about 290 grams9. Dimensions: 39 x 17 x 12.5 cm

Read more less

1. Using XL4016 switch voltage regulator chip, with MBR20100 dual rectifier, the input voltage can reach 40V and output 1.25~36V continuously adjustable2. 180KHz fixed frequency PWE step-down (step-down) DC/DC converter3. High efficiency and up to 8A load driving capacity4. Low ripple and excellent line and load regulation ability5. Built-in frequency compensation and fixed frequency oscillator6. Built-in over-current and short-circuit protection functions7. Built-in thermal shutdown function, output protection function, output overvoltage protection8. Voltage regulation method: PWM modulation9. Chip model: XL4016E110. Type: DC/DC power supply module11. Input voltage: DC4-40v12. Output range: DC1.25-36v13. Rated current: 8A14. Rated power: 200w15. Conversion efficiency: 94%16. Switching efficiency: 180Khz17. Size: 61x41x27mm

Read more less

1. Ultra-wide input and output voltage, ultra-high conversion efficiency2. Small size and adjustable boost module, which can be easily installed in various small devices3. MicroUSB input can be used, and the common voltages of 9V, 12V, 15V, 18V, 24V can be easily obtained through the mobile phone data line with a USB charger or mobile power supply, which is very convenient to use4. Packing: individually packed in anti-static bag5. Type: voltage regulator IC6. Output current: 2A (recommended to use within 1A)7. Input voltage: 2 v--24 v8. Output voltage: 28 v (recommended to use within 26V)9. Size: 30x17x14mmPrecautions:1. This module is a boost module, the output voltage should be greater than the input voltage2. The peak current output current does not exceed 2A

Read more less

1. The module uses STs L298N as the main driving chip, which has the characteristics of strong driving ability, low heat generation and strong anti-jamming ability.2. The module can use the built-in 78M05 to work through the drive power supply, but in order to avoid damage to the voltage regulator chip, when using a drive voltage greater than 12V, please use an external 5V logic power supply3. This module uses large-capacity filter capacitors and freewheeling protection diodes, which can improve reliability4. The high-voltage and high-current full-bridge driver with two bridges can be used to drive inductive loads such as DC motors, stepping motors, relay coils, etc.5. It has two enable control terminals, allowing or prohibiting the device to work without being affected by the input signal. There is a logic power input terminal to make the internal logic circuit work at low voltage.6. Features: high working voltage, large output current, using standard logic level signal control7. An external detection resistor can be connected to feedback the change to the control circuit8. Drive voltage: 5-35v9. Drive current: 2A10. Working voltage: 5v11. Working current: 0-36mA12. Storage temperature: -20 to 135 degrees Celsius13. Main control chip: L298N14. Packing: Individually packed in anti-static bag15. Rated power: 25w16. Working mode: double H-bridge drive17. Weight: 30g18. Size: 43x43x27mm

Read more less

1. According to the time set by the user, the power of various electrical equipment can be automatically turned on and off2. Scope of application: production equipment, street lights, light boxes, neon lights, warehouse exhaust and dehumidification, agricultural breeding, radio and television and other electrical power control products3. The program supports 16 sets of switches per day, different periods of on-off can be set every day of a week, with program memory, one-time setting, long-term cycle4. LED display, more accurate data5. Soft rubber keys, easy to operate6. Clear wiring diagram, clearer to use7. Power supply voltage: 220V/110V/24V/12V8. Travel time error: 1 second/24 hours9. Timing times: 16 times on and off10. Display device: LCD11. Power consumption: less than 2W12. Control power: 16A13. Internal battery: 1.2V 40mA rechargeable button battery14. Timing range: 1 minute -168 hours15. Ambient temperature: -25-65 degrees Celsius

Read more less

1. Applicable places: personal recording studio, professional recording studio, stage, chat room, Internet cafe, broadcasting room, control room.2. Scope of application: computer recording production, cover recording, online K song, video chat, broadcasting, radio hosting3. High-quality tight elastic rope winding is one of the very important recording accessories, which can effectively reduce the vibrato caused by vibration, making the recorded sound effect more appropriate and realistic4. SH-100 (with short teeth suitable for long tooth microphones), SH-101 (with long teeth suitable for short tooth microphones)5. Suitable for many types of microphones, the microphone clip can be adjusted up and down 180 degrees6. Material: ABS7. Weight: 0.28 kg8. Mesh diameter: 15 cm9. Overall length: 25.5 cm

Read more less

1. According to the time set by the user, the power of various electrical equipment can be automatically turned on and off2. Scope of application: production equipment, street lights, light boxes, neon lights, warehouse exhaust and dehumidification, agricultural breeding, radio and television and other electrical power control products3. The program supports 16 sets of switches per day, different periods of on-off can be set every day of a week, with program memory, one-time setting, long-term cycle4. LED display, more accurate data5. Soft rubber keys, easy to operate6. Clear wiring diagram, clearer to use7. Power supply voltage: 220V/110V/24V/12V8. Travel time error: 1 second/24 hours9. Timing times: 16 times on and off10. Display device: LCD11. Power consumption: less than 2W12. Control power: 16A13. Internal battery: 1.2V 40mA rechargeable button battery14. Timing range: 1 minute -168 hours15. Ambient temperature: -25-65 degrees Celsius

Read more less

1. Size: 9x8x4cm2. Storage medium: TF card3. LCD screen size: 2.4 inches4. Pixel range: Front and rear dual camera 1200W pixels5. Material: ABS6. Battery life: 2-3 hours7. Weight: 175g8. Input voltage: 5V/1A9. Printing method: Thermal black and white printing10. Support paper: Thermal paper, thermal sticker11. Battery capacity: 1500mah12. Power supply mode: USB power supplyPacking list: 1. Print camera x 12. Data cable x 13. Sticker book x 14. Lanyard x 15. Film x 16. Color pen set x 17. Printing paper x 2

Read more less

1. According to the time set by the user, the power of various electrical equipment can be automatically turned on and off2. Scope of application: production equipment, street lights, light boxes, neon lights, warehouse exhaust and dehumidification, agricultural breeding, radio and television and other electrical power control products3. The program supports 16 sets of switches per day, different periods of on-off can be set every day of a week, with program memory, one-time setting, long-term cycle4. LED display, more accurate data5. Soft rubber keys, easy to operate6. Clear wiring diagram, clearer to use7. Power supply voltage: 220V/110V/24V/12V8. Travel time error: 1 second/24 hours9. Timing times: 16 times on and off10. Display device: LCD11. Power consumption: less than 2W12. Control power: 16A13. Internal battery: 1.2V 40mA rechargeable button battery14. Timing range: 1 minute -168 hours15. Ambient temperature: -25-65 degrees Celsius

Read more less

1. No need to write Ethernet underlying code to implement TCP/IP protocol stack2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing3. Support 10/100MBPS transfer rate4. Support 8 independent ports working at the same time5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the "client", "server" and "UDP" three working modes, as well as a detailed manual10. Chip model: W550011. Input voltage: 3.3-5v12. Size: about 55 x 28mm

Read more less

1. Size: 9x8x4cm2. Storage medium: TF card3. LCD screen size: 2.4 inches4. Pixel range: Front and rear dual camera 1200W pixels5. Material: ABS6. Battery life: 2-3 hours7. Weight: 175g8. Input voltage: 5V/1A9. Printing method: Thermal black and white printing10. Support paper: Thermal paper, thermal sticker11. Battery capacity: 1500mah12. Power supply mode: USB power supplyPacking list: 1. Print camera x 12. Data cable x 13. Sticker book x 14. Lanyard x 15. Film x 16. Color pen set x 17. Printing paper x 2

Read more less

1. Rotate the lens 180 degrees 2. Video resolution: 720P, interpolated 1920x1080 3. Recording time: 5-6 hours of recording, 13 hours of independent recording 4. Lens pixels: 1 million 5. Lens angle: 90 degrees 6. Supports 256GB TF card (without memory card) 7. Built-in 1000mAh polymer lithium battery 8. Product size: 98x31x14mm (17.5mm) with clip height 9. Material: ABS

Read more less

1. Wear and stain resistant, shockproof and anti-fall. 2. Glue wrist strap is thick and thick, strong and reliable, easy to lift 3. Built-in hook and loop fastener buckle to secure the machine. 4. Double-sided sponge inner layer, can be placed or disassembled according to the size of the machine 5. Material: nylon

Read more less

1. Input voltage: 5V-2A 2. Light intensity: 1100-2800-5600Lux 3. Color temperture: 12000K 4. Batteries: 3 pcs AA batteries 5. Luminous: 720lm 6. Dimension: 337x227x12mm 7. Active Area: 300x210mm

Read more less

1. Put out the pen 2. Writing on the designated area 3. Press the remove-button to clear the writing content, please replace the battery when it is not clear 4. Panel: handwriting clear 5. Battery: CR2020 button battery

Read more less

1. Frequency range: - FM:60-108MHz - AM:522-1710KHz 2. LCD display: temprature, pedometer, frequecy, voice, battery symbol 3. Memory station: 50pcs 4. Backlight color: orange 5. Lithium battery: 350mah 3.7V 6. Stereo separation: >=32dB 7. Product size:90x40x8.5mm 8. Lock/Full scan search station function 9. Standard accessories: headset, usb cable, rope, color box, english manual

Read more less

1. Put out the pen 2. Writing on the designated area 3. Press the remove-button to clear the writing content, please replace the battery when not clear 4. Panel: handwriting clear 5. Battery: CR2020 button battery

Read more less

1. WIFI remote control: turn on / off the light from anywhere. 2. Application Support: Free iOS and Android Mobile Apps (Smart Life). 3. Voice control: with Amazon Alexa, Google Home voice control. 4. Independent control: control each way separately. 5. Sync status: real-time device status provided on the APP. 6. Timing function: set the schedule / countdown timer to turn on / off at the specified time. 7. Product specifications: Power supply: AC 100-250V Maximum current: 10A / channel Maximum power: 2000W / channel Wireless standard: 802.11 b / g / n Security mechanism: WPA-PSK / WPA2-PSK Product material: PC V0 fireproof + tempered glass panel

Read more less

1. WIFI remote control: turn on / off the light from anywhere. 2. Application Support: Free iOS and Android Mobile Apps (Smart Life). 3. Voice control: with Amazon Alexa, Google Home voice control. 4. Independent control: control each way separately. 5. Sync status: real-time device status provided on the APP. 6. Timing function: set the schedule / countdown timer to turn on / off at the specified time. 7. Product specifications: Power supply: AC 100-250V Maximum current: 10A / channel Maximum power: 2000W / channel Wireless standard: 802.11 b / g / n Security mechanism: WPA-PSK / WPA2-PSK Product material: PC V0 fireproof + tempered glass panel

Read more less

1. With 2.0 inch LCD display screen 2. File format: video(AVI), photo(JPEG) 3. Digital zoom: 16X 4. Video: 1080P 30fps/720P 30fps, 1080P&720P by interpolation, VGA 5. PC camera VGA: QVGA 320x240 6. Storage media SD(up to 8GB), MMC, support SDHC 7. PC interface: USB 2.0 8. Power source: 3 x AAA batteries(not included) 9. Supported O/S Microsoft Windows 98SE, ME, 2000, XP, VISTA 10. Size: 10x5.2x3.5cm 11. Material: ABS

Read more less

About AFI V51. With fashionable and attractive outlook design, AFI Light V5 enables you to make stable and smooth footage with your smartphone. 2. It has three smooth and steady footage modes, Panning, Pitching& Rolling. 3. The Gimbal can be used for up to 12 hrs, before the batteries need to be fully recharged. 4. The extendable pole extends the shooting distance and makes the shooting effect better. 5. The patented built-in dimmable fill light to give you enough light during shooting. 6. And multi-functional APP offers you a flexible and marvelous shooting experience. 7. There is a side standard 1/4 inch screw hole for adding microphone or a flashlight for video recording. 8. You can also add a side grip holder to add more stability to your footage 9. It also has a tripod made of aluminum, slim and strong support. Good accessory for your gimbal and camera. 10. Compatible with iPhone Xs / Max Xr X / 8 Plus 7 / 6 / Android Smartphones. 11. Capture your every moment, enjoy your life with our Light V5!High Light1. Lightweight and High-compatible. 2. 320 degree angle of pitch, roll and panning for free, steady and smooth filming. 3. Great Power for 12 hours run-time. 4. Built-in flash light with 3 grades brightness adjustable. 5. 10 cm/3.94 inch extension bar, favorable design during taking selfie to have more fun. 6. Quick and easy change of the shooting direction from horizontal to vertical. 7. Easy built-in zoom wheel control for zoom-in&out. 8. Multiple function controls such as panoramas, face tracking, time-lapse and etc. 9. Come with a tripod and carry bag.Specifications1. Run time: 12 hours 2. Title angle: 320 degree 3. Roll angle: 320 degree 4. Pan angle: 320 degree 5. Load: 75-200g / 2.65-7.05Oz 6. Charge time: 2.5 hours 7. Charge voltage: 5V 8. Support phone: Smartphones within 6 inch screen 9. Size: 124*117*337mm / 4.88*4.61*13.27inch 10. Weight: 480g / 16.930 oz / 1.056lbsPackage List1. V5 Gimbal x 1 2. USB Cable x 1 3. User Manual x 1 4. Mini tripod x 1 5. Carry Bag x 1

Read more less

1. 16.0 Mega Pixels CMOS sensor 2. LCD display: 2.4 inch TFT 3. External memory: SD/MMC/SDHC up to 32GB 4. Image file format: JPEG 5. Still image resolution: 16MP(4608x3472), 12MP(4000x3000), 5MP(2592x1944), 3MP(2048x1536), 1MP(1024x768), VGA(640x480) 6. Video resolution: HD(1280x720)Pixels@30fps, 720(720x480), 640(640x480), 320(640x480)Pixels@30fps 7. Video file format: AVI 8. Size: 9.2x5.8x2.4cm 9. Size: ABS 10. Power source: 3 x AAA batteries(not included)

Read more less

1. 16.0 Mega Pixels CMOS sensor 2. LCD display: 2.4 inch TFT 3. External memory: SD/MMC/SDHC up to 32GB 4. Image file format: JPEG 5. Still image resolution: 16MP(4608x3472), 12MP(4000x3000), 5MP(2592x1944), 3MP(2048x1536), 1MP(1024x768), VGA(640x480) 6. Video resolution: HD(1280x720)Pixels@30fps, 720(720x480), 640(640x480), 320(640x480)Pixels@30fps 7. Video file format: AVI 8. Size: 9.2x5.8x2.4cm 9. Size: ABS 10. Power source: 3 x AAA batteries(not included)

Read more less

1. Material is aluminum alloy, light and strong, not deformation 2. Suitble for most smartphones on the market, width between 46 to 87mm 3. Cage frame has some cold shoes and screws holes 4. Cage can be installed on tripod 5. Phone clip has silicone pad to protect phone 6. Strongly locked, the phone will not fall

Read more less

1. Used to install a mobile phone for mobile shooting. 2. The handle can be installed on all sides of the cage to achieve horizontal and vertical shooting of the phone. 3. There are springs and soft pads at the cell phone clamping position, which is convenient for clamping and will not scratch the cell phone. 4. There are multiple cold shoe ports and 1/4 thread ports on the top, which can install various peripherals. 5. The overall light weight can support long-term handheld use. 6. There are 1/4 screw posts and threaded holes on the handle, which can be connected to other shooting peripherals or directly connected to the camera. 7. You can hold both hands for stable shooting.

Read more less

1. For installing mobile phone to move shooting. 2. The handle can be installed on the various sides of the cage to realize mobile phone horizontal or vertical shooting. 3. The phone holder has springs and cushions for easy clamping and does not scratch the phone. 4. Multiple cold shoe interfaces and 1/4 threaded interface on the top for mounting other device. 5. Light weight, support mobile phone long shooting. 6. The handle grip has 1/4 screw and thread hole can be used with other shooting device or use with dslr camera directly. 7. The item is suitable for mobile phones under 6.6 inch (include 6.6 inch). 8. Note: The handle is not included.

Read more less

1. Material is aluminum alloy, light and strong, not deformation 2. Suitble for most smartphones on the market, width between 46 to 87mm 3. Cage frame has some cold shoes and screws holes 4. Cage can be installed on tripod 5. Phone clip has silicone pad to protect phone 6. Lock without shaking

Read more less

1. Voltage: 15-18V 2. Power: 36+36W 3. Color temperature: 3300K-5600K 4. Net weight: 1100g 5. Type: LED lamp beads 6. Number of lamp beads: 600 7. Dimming range: 10%-100 8. Battery power supply: 2 7.4 VNP750 batteries 9. Power supply: power supply adapter 10. Product size: 350x250x18mm 11. The 13-inch large screen is scientifically arranged, with a large range and sufficient light 12. Support remote wireless remote control 100K color temperature adjustment and brightness, according to the live scene to show sweet/cold wind and other light supplement effects 13. The color of the light is real, natural, with high restoration, and easy post-processing! 14. Equipped with universal metal connector for multi-angle adjustment

Read more less

1. Brightness: 1000 lumens 2. Contrast: 1000:1 3. Display ratio: 4:3/16:9 4. Projection size: 14-100 inches 5. Projection distance: 0.5-3.2 meters 6. Recommended projection size: 30-60 inches 7. Lens focusing: manual 8. Support decoding: 1080P 9. Interface: 1x audio output, 1xHDMI, 1xUSB, 1xMicro SD, 1xDC-in 10. Working power supply: DC 12V/2A 11. Product size: 13x10x4.5cm

Read more less