DJI & GoPro Accessories

1. Closed latch installation, fast and safe2. The protective frame makes full allowance for the opening and closing of the screen, allowing the screen to be opened and closed without any obstruction3. The bottom of the protective frame and the USB cover have reserved openings for the seamless installation of original quick release accessories, flash transfer partners, audio charging adapters and other accessories4. Flip the screen with three finger positions, so that the screen opens easily open and comfortable5. Horizontal shot: the quick release adapter can be fixed on the bottom of the camera6. Vertical shooting: the quick release adapter can be fixed on the quick release connector of the protective frame7. The quick release mounting port of the protective frame adopts non-magnetic direction design, when shooting vertically, you don't need to re-disassemble the quick release base, you can directly turn the camera 180 degrees to install it, and it is easy to realize the front shooting and self-timer8. Cold shoe expansion interface, can be installed fill light, microphone, let you Vlog more easily9. Material: ABS10. Size: about 8.64 x 6.27 x 3.44cm11. Weight: about 18g12. Description: only the camera protective frame, does not include other items in the picture

Read more less

1. The 100W USB-C battery charger has two USB-C output ports and can quickly charge DJI Mavic 3 series/Air 3/Mini series smart flight batteries, DJI remote controllers and other devices with USB-C ports.2. With powerful 100W output, this power adapter can charge the smart flight battery and remote controller at the same time, saving you valuable time and ensuring you are always ready to fly.3. Equipped with overvoltage and overcurrent protection to protect your device from damage and ensure a stable and reliable charging experience.4. Wide compatibility: Applicable to a range of DJI products, such as DJI Mavic 3 Pro, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Air 3, DJI Mini 4 Pro, DJI Mini 3, DJI Mini 3 Pro , DJI Mini 2 SE, DJI Mini 2, DI Mini SE, Mavic Mini, DJI remote control, DJI Avata, DJI Goggles 2 battery, and other USB-C port devices.5. Support PPS and PD fast charging protocolsParameter:1. Input voltage: 100V to 240V (AC), 50Hz to 60Hz, 2.5A2. USB-C1 output: 100W (Max)3. USB-C2 output: 100W (Max)4. Total output power: 100W (Max). When used simultaneously, the maximum output power of one interface is 82W and the maximum output power of the other interface is 18W. The charger will dynamically allocate the output power of the two interfaces based on the load power.5. Working environment temperature: 5-40 degrees Celsius6. Product size: 73.5 X 70 X 32mm7. Product net weight: 268+/-5g8. Charging time:--For DJI Mavic3 smart flight battery: about 1 hour and 10 minutes--For DJI RC-N1 remote control: about 2 hours and 40 minutes--For DJI RC remote control: about 2 hours--For DJI RC Pro remote control: about 2 hours--For DJI RC Pro Industrial Edition remote control: about 1 hour and 30 minutes--For DJI Avata Intelligent Flight Battery: about 47 minutes--For DJI Goggles 2 battery: about 1 hour and 50 minutes(When two charging interfaces are charging at the same time, the charging time will be slightly longer, please wait patiently. The charging time is measured in an experimental environment (room temperature 25 degrees Celsius) and is for reference only.)Packing list:100W battery charger x 1AC power cord x 1USB-C to USB-C cable x 1

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. Specifically designed for DJI Pocket 32. Anti-fall and anti-pressure, taking both inside and outside into account, it can not only withstand the squeeze in daily traffic, but also buffer the impact force when accidentally dropped, protecting the equipment from damage;3. Compact and lightweight, with reasonable space layout and just the right amount of storage;4. High-quality materials, wear-resistant and scratch-resistant, comfortable to the touch, not easy to wear or scratch, safe and durable;5. The soft sponge pad protects the machine from scratches and makes the installation more stable;6. The rope has two uses, is safe and strong, and can be used as a wrist rope or as a hanging neck;7. Anti-fouling and splash-proof, easy to clean;8. Easy to carry, travel with you, compact and meet various usage needs.9. Main material: ABS10. Net weight: 87.4g11. Product size: 5.3 x 4.2 x 19.7cmPacking list: Storage box × 1 (storage box only, no others included)

Read more less

1. Equipped with a silicone protective cover for the body and a silicone protective cover for the lens, so that the body and the lens are fully wrapped, making the protection more comprehensive2. Front screen, rear screen, microphone holes, speaker holes and other holes, all accurate openings3. Battery cover and USB cover can be opened and closed at will4. The screen is designed to avoid the air, so that the camera screen is not obstructed when opening and closing, and remains smooth and free5. The bottom is reserved for the installation of quick release adapters, so that the adapters can be freely disassembled and installed6. With a neck strap and the host set of anti-lost rope, more portable, more comfortable to use7. The surface of the set is hand-feeling, skin-friendly and delicate8. Material: silicone9. Size: about 7.8 x 6 x 4cm10. Weight: about 25g11. Description: only the camera protective sleeve, does not include other items in the picture

Read more less

1. Equipped with a silicone protective cover for the body and a silicone protective cover for the lens, so that the body and the lens are fully wrapped, making the protection more comprehensive2. Front screen, rear screen, microphone holes, speaker holes and other holes, all accurate openings3. Battery cover and USB cover can be opened and closed at will4. The screen is designed to avoid the air, so that the camera screen is not obstructed when opening and closing, and remains smooth and free5. The bottom is reserved for the installation of quick release adapters, so that the adapters can be freely disassembled and installed6. With a neck strap and the host set of anti-lost rope, more portable, more comfortable to use7. The surface of the set is hand-feeling, skin-friendly and delicate8. Material: silicone9. Size: about 7.8 x 6 x 4cm10. Weight: about 25g11. Description: only the camera protective sleeve, does not include other items in the picture

Read more less

1. Equipped with a silicone protective cover for the body and a silicone protective cover for the lens, so that the body and the lens are fully wrapped, making the protection more comprehensive2. Front screen, rear screen, microphone holes, speaker holes and other holes, all accurate openings3. Battery cover and USB cover can be opened and closed at will4. The screen is designed to avoid the air, so that the camera screen is not obstructed when opening and closing, and remains smooth and free5. The bottom is reserved for the installation of quick release adapters, so that the adapters can be freely disassembled and installed6. With a neck strap and the host set of anti-lost rope, more portable, more comfortable to use7. The surface of the set is hand-feeling, skin-friendly and delicate8. Material: silicone9. Size: about 7.8 x 6 x 4cm10. Weight: about 25g11. Description: only the camera protective sleeve, does not include other items in the picture

Read more less

1. Professional design, it can be balanced without turning on the machine, effectively reducing the pressure on the motor, allowing for smooth shooting and longer battery life;2. Freely switch between horizontal and vertical shots, providing more creative space;3. The carbon pattern design shows more quality; the bow and arrow inspired design is beautiful and sturdy;4. The left and right sides can be moved and adjusted for wider adaptability;5. Universal for Gopro adapter design, suitable for almost all action cameras;6. Compact and portable, taking up no space and easy to carry.7. Applicable models: suitable for DJI OSMO 6 5 4 38. Product weight: 181g9. Product size: 9.1 x 8 x 2.3cm

Read more less

1. Equipped with a silicone protective cover for the body and a silicone protective cover for the lens, so that the body and the lens are fully wrapped, making the protection more comprehensive2. Front screen, rear screen, microphone holes, speaker holes and other holes, all accurate openings3. Battery cover and USB cover can be opened and closed at will4. The screen is designed to avoid the air, so that the camera screen is not obstructed when opening and closing, and remains smooth and free5. The bottom is reserved for the installation of quick release adapters, so that the adapters can be freely disassembled and installed6. With a neck strap and the host set of anti-lost rope, more portable, more comfortable to use7. The surface of the set is hand-feeling, skin-friendly and delicate8. Material: silicone9. Size: about 7.8 x 6 x 4cm10. Weight: about 25g11. Description: only the camera protective sleeve, does not include other items in the picture

Read more less

1. Built-in strong magnet, quick disassembly, easy to use2. Thin and lightweight design, compact and portable3. Fixed by magnet and claw clasp4. With anti-vibration silicone sheet, further strengthen the installation of quick release accessories firmly, easy to deal with high-intensity vibration scenarios5. Strong compatibility of accessories, small body, body silicone sleeve, rabbit cage, etc., with the use of6. The surface is hand-feeling treatment, skin-friendly and delicate7. Material: metal8. Size: about 45.7 x 19.6 x 12.5mm9. Weight: about 32g10. Description: only quick release parts, does not include other items in the picture

Read more less

1. 37W high power input, intelligent temperature control charging algorithm, adjust charging power according to temperature, faster and safer2. LED lighting, 1-5 levels of brightness can be switched cyclically, and can be used in multiple scenes and for multiple purposes, meeting the needs of outdoor adventure and night flights. (Press and hold the light button for more than 2S to turn on the LED light. The default brightness mode is the second level. The fifth level is the strobe mode. Press and hold the light button for more than 2S to turn off the LED light.)3. SOS reminder: Using dynamic SOS intelligent algorithm, as the battery power decreases, the interval between calls for help is lengthened, ensuring longer calls for help.4. Intelligent detection of battery power, the battery will be charged in order from high to low power. (Only when charging the intelligent flight battery)5. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections6. LED indicator light to check battery power more accurately7. One-key storage function: Press and hold the function button for more than 2 seconds while charging to turn on the 60% storage mode. Convenient for travel, air transportation, and storage when not in use for a long time.8. Suitable for DJI Mini 4 Pro / Mini 3 series batteries, and supports PD fast charging protocol. The USB-A port can also quickly charge other digital devices.Parameter:1. Input (USB-C): 5V 3A/9V 3A/12V 3A2. Charging power: 37W (Max)3. Output (USB-A): 5V 2A, 10W (Max)4. Charging method: charge three batteries in sequence5. Compatible battery: Suitable for DJI Mini 3 series smart flight batteries, DJI Mini 4 Pro smart flight batteries, DJI Mini 4 Pro/Mini 3 series long-life smart flight batteries6. Adaptation charger: It is recommended to use 30W/65W PD protocol charger7. LED lighting function: supported8. Call for help reminder function: supported9. One-click storage mode: supported10. Battery display: supported11. Working environment temperature: 5-40 degrees Celsius12. Dimensions: 100 x 54 x 55mm

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Horizontal shot: the quick release adapter can be attached to the bottom of the camera2. Vertical shot: the quick release adapter can be fixed on the quick release connector of the protective frame3. The quick release mounting port of the dive housing is designed with non-magnetic pole direction, no need to re-disassemble the quick release base, you can directly turn the camera 180 degrees to install it, easy to realize the front shooting and self-taking4. Sturdy case + sealing ring, with 2.0mm tempered lens, brings excellent waterproof performance, can easily cope with underwater water pressure of 60m5. Multi-coated glass lens can reduce stray light reflection, and effectively prevent oil and dirt, make the image more transparent and delicate6. Sliding safety lock, easy to use, stable and reliable 7. Three anti-fog tablets can be placed inside the shell to keep the shell dry at all times and ensure that the lens does not fog up8. Anti-lost rope hole design, you can install the anti-lost rope when necessary, so that the camera can be used more relieved9. Compatible with the original quick release base and aMagisn quick release base.10. Packing list: diving case x 1, anti-fog sheet x 9, storage bag x 111. Material: PC, glass12. Size: about 9.72 x 7.86 x 5cm13. Weight: about 125g

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Horizontal shot: the quick release adapter can be attached to the bottom of the camera2. Vertical shot: the quick release adapter can be fixed on the quick release connector of the protective frame3. The quick release mounting port of the dive housing is designed with non-magnetic pole direction, no need to re-disassemble the quick release base, you can directly turn the camera 180 degrees to install it, easy to realize the front shooting and self-taking4. Sturdy case + sealing ring, with 2.0mm tempered lens, brings excellent waterproof performance, can easily cope with underwater water pressure of 60m5. Multi-coated glass lens can reduce stray light reflection, and effectively prevent oil and dirt, make the image more transparent and delicate6. Sliding safety lock, easy to use, stable and reliable 7. Three anti-fog tablets can be placed inside the shell to keep the shell dry at all times and ensure that the lens does not fog up8. Anti-lost rope hole design, you can install the anti-lost rope when necessary, so that the camera can be used more relieved9. Compatible with the original quick release base and aMagisn quick release base.10. Packing list: diving case x 1, anti-fog sheet x 9, storage bag x 111. Material: PC, glass12. Size: about 9.72 x 7.86 x 5cm13. Weight: about 125g

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality2. The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries3. Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent4. 1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless5. Does not block the host lens field of view, shooting screen transparent without dark corners6. The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera7. CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation8. Material: ABS + glass9. Single filter weight: about 8g10. Size: about 35.3 x 35.3 x 7.2mm11. Description: only the filter, does not include other items in the picture

Read more less

1. 100W high power input, can charge three batteries at the same time2. LED lighting, 1-5 levels of brightness can be switched cyclically, and can be used in multiple scenes and for multiple purposes, meeting the needs of outdoor adventure and night flights. (Press and hold the light button for more than 2S to turn on the LED light. The default brightness mode is the second level. The fifth level is the strobe mode. Press and hold the light button for more than 2S to turn off the LED light.)3. SOS reminder: Using dynamic SOS intelligent algorithm, as the battery power decreases, the interval between calls for help is lengthened, ensuring longer calls for help.4. Intelligently detects the battery power and charges three batteries at the same time, which is efficient and time-saving, and will give priority to charging the battery with the highest capacity.5. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections6. LED indicator light to check battery power more accurately7. One-key storage function: Press and hold the function button for more than 2 seconds while charging to turn on the 60% storage mode. Convenient for travel, air transportation, and storage when not in use for a long time.8. Suitable for DJI Mini 4 Pro / Mini 3 series batteries, and supports PD fast charging protocol. The USB-A port can also quickly charge other digital devices.parameter:1. Input (USB-C): 5V 3A/9V 3A/12V 3A/15V 3A/20V 3.25A/20V 5A2. Charging power: 100W (Max)3. Output (USB-A): 5V 2A, 10W (Max)4. Charging method: charge three batteries at the same time5. Compatible battery: Suitable for DJI Mini 3 series smart flight batteries, DJI Mini 4 Pro smart flight batteries, DJI Mini 4 Pro/Mini 3 series long-life smart flight batteries6. Adaptation charger: It is recommended to use 65W/100W PD protocol charger7. LED lighting function: supported8. Call for help reminder function: supported9. One-click storage mode: supported10. Battery display: supported11. Working environment temperature: 5-40 degrees Celsius12. Dimensions: 100 x 54 x 55mm

Read more less

1. The self-balancing strap system suitable for DJI RC/RC 2 remote controllers with screen. By matching the shoulder strap with components, you can free your hands and keep the screen control always facing up.2. The shape fits and coordinates with the body, and the design is reasonable without blocking the screen or affecting signal transmission.3. The shoulder strap is made of super-fiber double-layer leather with exquisite stitching, making it comfortable to wear without strangling your neck.4. Electroplated aluminum alloy buckles, tightly installed, strong and durable and will not fall off5. Three detachable buckles, lightweight design allows you to travel easily6. The high-density woven belt is wear-resistant and the length of the lanyard can be adjusted to meet the wearing needs of most people.7. Material: PU leather + calfskin + nylon8. Adjustable range: 13-23 cm9. Dimensions: length 142cm, width 3.5cm, thickness 0.35cm10. Net weight: 95.2g

Read more less

1. Built-in strong magnet, quick disassembly, easy to use2. Composite material, light and strong3. Fixed by magnetic suction and claw clasp4. With anti-vibration silicone sheet, further strengthen the installation of quick release accessories firmly, easy to cope with high-intensity vibration scene5. Strong compatibility with accessories, small body, body silicone sleeve, rabbit cage, etc. with the use of6. Material: plastic7. Size: about 45.4 x 19.5 x 32.1mm8. Weight: about 16g9. Description: only quick release parts, does not include other items in the picture

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. 200W Air 3 3-channel charging manager, supports 2 100W inputs. In standard mode, the first battery is fully charged in 60 minutes, and the three batteries are fully charged in 80 minutes; in fast charging mode, the first battery is fully charged in 40 minutes, and the three batteries are fully charged in 60 minutes. (The above charging time is based on the Charging Manager with two LKTOP 100W desktop chargers, and the initial battery capacity is 0-10%. The charging test data is measured in a laboratory environment (room temperature 25 degrees Celsius) and is for reference only. .)2. With built-in screen display function, you can view each battery’s information, voltage, capacity, temperature, number of cycles, power, etc.3. Exquisite and compact design, the contact area between the battery and the charging compartment is small, and the battery is suspended on all sides for good heat dissipation, which delays the battery lifespan.4. Three charging modes are available: the charging butler has three modes: 100% standard mode, 95% fast charging mode, and 60% storage mode to meet different needs.5. Power bank output mode: When the USB-C input port is not connected to the power supply, insert the battery, long press the function button to turn on the phone, enter the power bank output mode, and connect a mobile phone or other digital device to the USB-C output port. 6. Power collection function: The charging butler has a power collection function that concentrates the remaining power in multiple low-power batteries into a battery with high remaining power, allowing you to use one more battery.7. Power balancing function: The charging butler has a power balancing function. The power balancing function is to distribute the power in high-power batteries to other low-power batteries, so that all batteries have the same power, and energy is recycled without waste, which is convenient for long-term storage and aviation. Transportation etc.8. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protectionsParameter:1. Applicable battery model: suitable foe DJI Air 3 intelligent flight battery (BWX233-4241-14.76)2. Working temperature: 5-40 degrees Celsius3. USB-C1/C2 input: 9-20V--5V 100W Max4. USB-C1+USB-C2 input: 200W Max5. USB-C output: 5-15V-3A 45W Max6. USB-C1/C2 protocol: C port input supports PD fast charging protocol, with power greater than 18W7. Maximum charging power of each battery: 17V-5A 80W Max8. Recommended power adapter: 100W/65W charger9. Product size: approximately 164×61×52mm (product host)10. Product weight: about 158g (excluding wire weight)

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.5g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC-N1/RC-N2 remote control6. Size: 2.2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V2A, or 2A or more PD power adapter)3. Output: 4.35V 2.5A4. Charging time: about 75-115min5. Material: ABS6. Weight: about 84g7. Size: about 13.52 x 5.62 x 2.52cm8. Description: only the charger base, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, which can recognize high and low battery, and prioritize the high battery to be full3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. Two-color injection molding process, the shell of the inner layer of hard rubber, the outer layer of soft rubber molding, soft and hard to hold in the hand, a good sense of texture7. Lightweight and portable, can be easily put into your pocket8. Multi-protection, over-current/over-voltage/over-charging/short-circuit/overload/fire protection9. With charging indicator

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. All-around protection, no fear of scratches and bruises2. Precise opening of holes and slots3. The open design of the module's connection, after installing the protective cover, the threaded handle and the continuation handle can still be connected to the host, and the screen can be rotated smoothly4. The opening at the bottom is flush with the bottom of the threaded handle and the renewal handle, after installing the protective cover, the handle can still be stood on the desktop smoothly, and the bracket can still be firmly installed on the handle threads5. The screen protector cover is equipped with an anti-lost rope, once the screen protector cover is lifted, you can start shooting, no need to worry about storing the cover6. The surface has been hand-feeling treatment, skin-friendly and delicate7. Material: silicone8. Description: only the protective case, does not include other items in the picturePacking list:5 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded handle case x 1- Lanyard x 17 In 1:- Body case x 1- Lens case x 1- Screen case x 1- Threaded grip case x 1- MIC case x 1- Continuity grip case x 1- Lanyard x 1

Read more less

1. Individually powered triple charging slots, can charge three batteries at the same time2. When the battery is low, the charging cradle charges the battery with maximum power; when the battery enters the high power state, the charging cradle gradually reduces the charging power; when the battery is fully charged, the charging cradle stops charging the battery immediately3. Holds up to three micro SD cards4. With charging indicator5. Multi-protection, over-current/over-voltage/over-temperature/short-circuit/electrostatic protection6. Input interface: Type-C7. Input: 5V 3A8. Output: 4.35V 1A9. Charging time: about 2h10. Material: ABS11. Weight: about 67g12. Size: about 58.5 x 55.2 x 40.6mm13. Description: only the charger base, does not include other items in the picture

Read more less

1. Using gallium nitride technology, it can increase charging speed and be smaller in size.2. It has two output interfaces, USB-C and USB-A, which can charge the battery and remote control at the same time.3. Supports PPS and PD protocols, and can also charge your mobile phones, computers and other devices.4. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections, super fast charging also brings more safety.Technical Parameters:1. Input voltage: 100-240 V, 50/60 Hz, 2A2. Output parameters:--Type-C: 5V/9V/12V/15V-3A, 20V-3.25A (65W Max)--USB-A: 5V-2.4A, 9V-2A, 12V-1.5A (18W Max)--Type-C+USB-A: Type-C: 5V/9V/12V/15V-3A, 20V-2.25A (45W Max); USB-A: 5V-2.4A, 9V-2A, 12V-1A ( 18W Max)3. Rated power: 65W4. Operating ambient temperature: 5- 40 degrees Celsius5. Charging time:--Intelligent flight battery: about 1 hour 36 minutes--For DJI RC Pro remote controller: about 1 hour and 30 minutes (USB-C interface) (Note: When charging the intelligent flight battery and remote controller or other mobile devices at the same time, the charging time will be slightly longer, please be patient.)Compatible products:--For DJI Mavic 3--For DJI Mavic 3 Cine--For DJI Mavic Mini 2--For DJI Mavic Mini SEPacking list:65W portable charger × 10.5m Type-C data cable x 1

Read more less

1. Made of environmentally friendly TPU material, sturdy and durable. 2. It helps protect your camera from dust, smudges and scratches. 3. The hole position is accurate to ensure good appearance and protective function without affecting use. 4. Beautiful and elegant, comfortable to touch and easy to clean 5. This is a good choice for every photographer or outdoor enthusiast.

Read more less

1. Made of environmentally friendly TPU material, sturdy and durable. 2. It helps protect your camera from dust, smudges and scratches. 3. The hole position is accurate to ensure good appearance and protective function without affecting use. 4. Beautiful and elegant, comfortable to touch and easy to clean 5. This is a good choice for every photographer or outdoor enthusiast.

Read more less

1. 100W gallium nitride multi-port charger, lightning fast charging, saving time and worry, high energy efficiency conversion rate, low loss, not easy to get hot when charging, more suitable for charging drones, action cameras, and handheld shooting equipment products.2. 3 USB-C+1 USB-A port output, intelligent identification and distribution of power, safe charging without damaging the machine3. 90-degree folding plug, easy to carry4. Built-in multiple safety protections, with over-current, over-voltage, over-temperature and other protections, no screen skipping, no screen flickering, and battery protection to protect your charging process. Super fast charging also brings more safety.Parameter:1. Interface: Type-C1/C2/C3/USB-A2. Input: 100-240V 50/60Hz 2A3. Type-C1/C2 output: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A (100WMax)4. Type-C3 output: 5V=3A, 9V=3A, 12V2.5A, 15V-2A, 20V-1.5A (30W Max)5. USB-A output: 5V-3A, 9V-3A, 12V-2.5A, 20V-1.5A (30W Max)6. Total output power: 100W Max7. Product size: 85 X 61 X 28.5mm8. Net weight: 220+/-5gApplicable models:--For DJI Mavic 3 Pro/DJI Mavic 3 Pro Cine--For DJI Mavic 3 Classic/DJI Mavic 3--For DJI Mavic 3 Cine/DJI Mavic 3 Industry Series--For DJI Air 3/DJI Avata/DJI Goggles 2 batteries--For DJI Air 3 Charging Manager/DJI Mavic 3 Series 100W Charging Manager--For DJI Mini 3, DJI Mini 3 Pro, DJI Mini 4 Pro/Mini 3 series two-way charging manager (DJI Mini 3/Mini 3 Pro/Mini 4 Pro smart flight battery supports up to 30W input)--Support other fast charging protocols (PD/QC/PPS, etc.) electronic equipment

Read more less

1. 1:1 modeling of the real machine, full screen, full lens integrated coverage, all-round protection2. 9H+ high hardness, reinforced glass fiber material layer, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and dirt-proof, anti-scratch and anti-abrasion, anti-fingerprints4. High transmittance glass layer technology, reduce light reflection, the use of non-reflective perception, take pictures of high-definition more focused5. Silky smooth hand feel, touch sensitive and non-obstructive6. Material: tempered glass7. Hardness: 9H8. Thickness: 0.4mm9. Description: the picture of the camera, lens only for display purposes, the shipment does not containPacking list:1set:- Tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 12sets:- Tempered film x 2- Wet and dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. 1:1 modeling of the real machine, full screen, full lens integrated coverage, all-round protection2. 9H+ high hardness, reinforced glass fiber material layer, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and dirt-proof, anti-scratch and anti-abrasion, anti-fingerprints4. High transmittance glass layer technology, reduce light reflection, the use of non-reflective perception, take pictures of high-definition more focused5. Silky smooth hand feel, touch sensitive and non-obstructive6. Material: tempered glass7. Hardness: 9H8. Thickness: 0.4mm9. Description: the picture of the camera, lens only for display purposes, the shipment does not containPacking list:1set:- Tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 12sets:- Tempered film x 2- Wet and dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. Real camera open mold, fully fit the body, easy to carry and storage2. Body bag in the camera USB cover to do the opening design, USB cover can be opened and closed at will, at any time to the camera charging3. Velvet inner layer, soft touch, shock absorption and protection of the camera4. Surface case using woven ants fabric, wear-resistant and not easy to scratch, effectively prevent the invasion of water and snow, long-lasting use does not fall off the skin5. Bottom opening, can be directly connected to the selfie stick and other camera brackets6. Material: EVA + ants cloth7. Weight: about 35g8. Size: about 9.8 x 7.2 x 4.6cm9. Description: only the organizer bag, does not include other items in the picture

Read more less

1. Full screen and full lens integrated coverage, original molding, all-round protection without dead angle2. 9H+ high hardness, reinforced glass fiber material layer, 5 layers of pressure resistance, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and anti-fouling, anti-scratch and anti-abrasion4. High transmittance glass layer technology, reduce light reflection, the use of the perception of non-reflective, high-definition photo more focused5. Silky smooth hand feel, sensitive touch without obstruction6. Material: tempered glass7. Hardness: 9H8. Size:- Front screen tempered film: about 22.4 x 22.4mm - Rear screen tempered film: about 65.4 x 39.4mm- Lens tempered film: approx. 32.2 x 32.2mm9. Description: the camera in the picture is only for display purposes, shipment does not includePacking list:3 in 1:- Tempered film for front screen x 1- Tempered film for rear screen x 1- Lens tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 16 in 1:- Tempered film for front screen x 2- Tempered film for rear screen x 2- Lens tempered film x 2- Wet/dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. The lens is fully wrapped, more comprehensive protection2. With hanging hole design, can be hung on the lanyard to prevent loss3. The surface has been hand-feeling treatment, skin-friendly and delicate4. Precise molding, easy to disassemble and install5. Material: silicone6. Size: about 39 x 8.7mm7. Weight: about 6g8. Description: only the lens cap, does not include other items in the picture

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V 2A, or power adapter above 2A)3. Output: 4.35V 2.5A4. Charging time: about 35-75min5. Material: ABS6. Weight: about 58g7. Size: about 7.2 x 5.9 x 4cm8. Description: only the charging box, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, can identify high and low battery, prioritize to fill the high power battery3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. With charging indicator7. Lightweight and portable, can be easily put into the pocket8. Multi-protection, over-current/over-voltage/over-temperature/short-circuit/static protection

Read more less

1. 1:1 real machine molding, tight fit, 360-degree full-package protection, seamless not into the dust2. High elasticity flexible silicone cushioning to a large extent, absorbing force protection lens3. Finger grooves on the top/bottom side for better finger force during disassembly and installation4. High elasticity, strong flexibility, repeated tugging and pulling without deformation, not easy to bad5. The surface is hand-feeling treatment, skin-friendly and delicate6. Waterproof and anti-fouling, one wipe clean7. Material: silicone8. Weight: about 3g9. Size: about 39 x 41 x 6.5mm10. Description: only the lens case, does not include other items in the picture

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 3.5g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC-N1/RC-N2 remote control6. Size: 2.2 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. The lens is fully wrapped, more comprehensive protection2. With hanging hole design, can be hung on the lanyard to prevent loss3. The surface has been hand-feeling treatment, skin-friendly and delicate4. Precise molding, easy to disassemble and install5. Material: silicone6. Size: about 39 x 8.7mm7. Weight: about 6g8. Description: only the lens cap, does not include other items in the picture

Read more less

1. Compact and lightweight, easy to carry and can be easily stored in the remote control storage groove2. Made of aviation aluminum alloy, high hardness and durable; light weight only 2.3g per pair3. Ergonomic design, knurled anti-slip, comfortable to use4. Exquisite design, sensitive control, and stable swinging back and forth, left and right5. Applicable models: suitable for DJI RC/RC 2 remote controller6. Size: 1.8 x 0.8cm7. Note: The product is only a joystick, not a remote control

Read more less

1. Do flip cover structure design at the battery compartment, a push flip cover toggle, you can open the flip cover for battery replacement, convenient and fast2. Silicone protective cover for the lens, so that the camera can be stored to avoid bumps and scratches3. The rabbit cage makes full allowance for the opening and closing of the screen, which allows the screen to be opened and closed without any obstruction4. Flip the screen with two fingers, so that the screen can be opened easily and comfortably5. Horizontal shooting: the quick release parts are attached directly to the camera through the opening at the bottom of the rabbit cage6. Vertical shot: the quick release accessory is attached to the side of the rabbit cage7. The quick release mounting port of the protective frame is designed in a non-magnetic direction, so that when shooting vertically, you don't need to re-disassemble the base of the quick release, and you can directly turn the camera 180 degrees to install it, so that you can easily realize the front shooting and self-timer8. Soft foam on the top and bottom of the inner side, the camera can be firmly fixed after installation9. The flip cover is fixed with snap fasteners for easy operation and good firmness10. The openings on the bottom and USB cover allow for seamless installation of original quick release accessories, flash transfer partners, audio charging adapters and other accessories11. Reserved cold shoe expansion interface, can expand the fill light, microphone, etc.12. Material: aluminum alloy13. Size: about 8.55 x 6.46 x 3.28cm14. Weight: about 60g15. Description: only the camera protective frame, does not include other items in the picture

Read more less