Test Equipment

1. High-precision integrated chip, high sensitivity, accurate temperature control2. Support Celsius/Fahrenheit display3. When the thermocouple signal is input, the digital display resolution can reach 0.1 degrees Celsius / 0.1 degrees Fahrenheit4. The relay and SSR are integrated, and the relay output or SSR output can be freely used5. Short shell design, about 85mm deep, easy to assemble and use6. Fireproof and waterproof, dust-proof and shockproof, the shell is sturdy7. Control mode: PID control and self-tuning control8. Temperature range: 0- 1300 degrees Celsius9. Power supply voltage: 100-240V 50/60Hz10. Output signal: relay/SSR output11. Size: 9.6x9.6x8.5cm

Read more less

1. Voltage range: 50-380V AC2. Temperature range: -20-199 degrees Celsius3. Material: ABS4. Hole size: 22mm5. Dimensions: about 2.8x5.1x2 cm6. Weight: about 36 grams

Read more less

1. Remote control on/off at any time through APP2. Voltage: 85-300V AC 50/60Hz3. Rated current: 80A4. Wifi frequency: 2.4GHz5. 100 on/off programs can be set daily or weekly6. If the network is disconnected, the timer will keep all the programs set by the phone and work according to the set programs7. With a memory function, when the contact is in a closed state, the contact remains closed after power off and re-energized8. Share to 100 people via mobile app9. When the load exceeds the rated current, the load circuit will be automatically disconnected10. Installation: DIN rail 35mm11. Size: about 10x4.8x3.5cm12. Weight: about 196 grams

Read more less

1. Material: ABS2. Display mode: 2.8-inch LCD screen display, 320x240 pixels3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection temperature: -10 to 50 degrees celsius7. Relative humidity: 20 percent to 85 percent8. Storage temperature: -10 degrees celsius to 60 degrees celsius9. Concentration unit of HCHO and TVOC: mg/m310. Power supply: 1500mAh lithium battery11. Power supply: 5V DC power charging via USB port12. User adjustable formaldehyde (HCHO) alarm threshold to alert user to elevated13. Onboard fan draws ambient air for more accurate real-time results14. With low battery warning15. Combined with multiple air sensors and a built-in fan, it can monitor real-time detectable formaldehyde (HCHO), total volatile organic compounds (TVOC), particulate matter < 2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and recording function16. Dimensions: 155x87x35mm17. Weight: about 280 gramsPacking list:- Detector x 1- USB cable x 1- Manual x 1

Read more less

1. PVC + alloy head, not easy to break, good toughness, no rust 2. Fast transmission speed, low impedance, good toughness 3. Length: 54CM 4. Alligator clip, upgraded thickened clip body, pull-resistant plug, large bite force, does not fall off 5. Insulation all-inclusive edge protectsthe alligator clip without leakage

Read more less

1. Silicone leads, burn resistant 2. Alligator clip, Strong bite force the spring in bold, not easy to fall off, Welding is firm 3. Environment-friendly soft silicone, not easy to break, good toughness 4. Fast transmission, steady current, 168 pcs of copper wire 5. It can plug to the multimeter, probes are very sharp, very suitable for IC pins, LED and small components 6. Length: 1.35m 7. High temperature resistance: 240 degrees

Read more less

1. Material: ABS2. Display mode: digital tube display3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection of PM2.5: 0-999 ug/cubic meter7. Detection temperature: -10 to 50 degrees celsius8. Relative humidity: 20 percent to 85 percent9. Storage temperature: -10 degrees celsius to 60 degrees celsius10. Power supply: 1000mAh lithium battery11. Power supply: 5V DC power charging via USB port12. Combined with dust air sensor and built-in fan, it can monitor PM2.5, temperature and humidity in real time on digital LCD display13. Product weight: 168 grams14. Product size: 100x95x47mm

Read more less

1. Material: ABS2. Display mode: 2.8-inch LCD screen display, 320 x 240 pixels3. Atmospheric pressure: 86Kpa - 106Kpa4. Detection method of PM: laser scattering5. Sampling time: 1.5 seconds6. Detection temperature: -10 degrees celsius to 50 degrees celsius7. PM (PM2.5/1.0/10) concentration unit: ug/cubic meter8. Concentration unit of HCHO and TVOC: mg/m39. Power supply: 2000mAh lithium battery; 5V DC power charging via USB port10. Can detect formaldehyde (HCHO), total volatile organic compounds (TVOC), particles less than 2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and recording functions11. Onboard fan draws ambient air for more accurate real-time results12. The formaldehyde alarm threshold is 0.1 mg/m3, if the HCHO level exceeds this alarm threshold, the device will sound a short beep alarm13. Product weight: 183 grams14. Product size: 164 x 69 x 44 mmPacking list:- Air quality monitor x 1- Micro USB charging cable x 1- Product manual x 1

Read more less

1. Material: ABS2. Display mode: 4.3-inch LCD display, 320 x 240 pixels3. Atmospheric pressure: 86Kpa - 106Kpa4. PM Detection Method: Laser Scattering5. Sampling time: 1.5 seconds6. Detection temperature: -10 degrees celsius to 50 degrees celsius7. Relative humidity: 20 percent to 85 percent8. Storage temperature: -10 degrees celsius to 60 degrees celsius9. HCHO and TVOC concentration unit: mg/m310. Power supply: 3000mAh lithium battery; 5V DC power charging via USB port11. Multifunctional air quality detector, which can detect formaldehyde (HCHO), total volatile organic compounds (TVOC), particles less than 2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and record Features12. Product weight: about 530 grams13. Dimensions: 131x78x67.5mm

Read more less

1. Superconducting probe, accurate measurement, fast transmission 2. Protect the fine-tipped needles from damage, with friction ring make it easier and safer to change the prob 3. Special buckle design, make the connection stronger 4. Applicable to all types of multimeters, with strong overload current capability 5. 168 roots 0.08AS copper conductor, fast transmission

Read more less

1. Material: ABS2. Power supply: 2000mAh rechargeable lithium battery3. Sampling time: 1.5 seconds4. Detection temperature: -10 degrees celsius to 50 degrees celsius5. Relative humidity: 20 percent to 85 percent6. Storage temperature: -10 degrees celsius to 60 degrees celsius7. Detection method: sensor laser8. Measurement: PM2.5 HCHO TVOC TEMP HUM9. PM2.5 0-999: micrograms/cubic meter10. HCHO range: 0.001-1.999Mg/M311. TVOC range: 0.001-9.999Mg/M312. Product size: 90x90x50mm13. Weight: about 320 gramsPacking list:- Detector x 1- USB charging cable x 1- English manual x 1

Read more less

1. This ultrasonic thickness gauge is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material. 2. Auto calibration to assure the accuracy. 3. Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer. 4. Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not. 5. 10 thickness measurement storage and recall function available, which facilitates the height work or working in wild area. 6. Low battery indication 7. Auto power off mode designed to conserve battery life. 8. More than 10000 times long lift keys. 9. The unit has a special memory that retains all of its setting even when the power is off. 10. Power supply: 3 X 1.5V AAA batteries(Not included)

Read more less

1. Auto MPPT detection: when pressing the AUTO MPPT test button, the instrument automatically adjusts the test interval time according to the current power value and refreshes the digital display. for example, when the power of solar panel is 100W, refresh once every 5s.2. Manual MPPT detection: when pressing the manual MPPT test button, the instrument starts a scan of the maximum power point and refreshes the digital display.3. Open circuit voltage realtime display: the open circuit voltage will display on the large LCD screen at any time, giving you a better experience.4. Large LCD display with backlight: the upgraded screen adopts large LCD with backlight, you can turn on or turn off the screen with your like.5. Multi-protections: over-voltage protects, over-temperature protects, over-current protects and over-rated power protects.6. Wide applications: this multimeter can be widely used by PV panel manufacturers, PV panel distributors, PV panel installers, PV panel users and PV panel fans.

Read more less

Parameter:1. Material: ABS+Silicone2. AC voltage: 0-750V3. DC voltage: 0-1000V4. AC current: 0-10A5. DC current: 0-10A6. Resistance: 0-60 milliohms7. Capacitance: 0nF-100mF8. Temperature: -40~1000 degrees Celsius / -40~1832 degrees Fahrenheit9. Hertz: 0-999.9kHz10. Count: 6000 count11. Built-in battery: 3.7V 1200mAh lithium battery12. Dimensions: 150.8x74.8x23.8mmDescribe:1. Multi-function tester, including AC and DC voltage, AC and DC current, resistance, capacitance, temperature, frequency, diode, on-off, zero live wire and other measurement functions2. Large 5-inch LCD digital display with backlight, 6000 counts3. The display has a data hold function, and the measured value can be read clearly even in a dark environment4. Intelligent anti-burning, built-in fuse, all-round anti-burning protection, not afraid of damaging the components of the multimeter5. NCV non-contact induction, when detecting nearby AC voltage, it will flash red light and sound an alarm6. Built-in rechargeable lithium battery, no need to buy and replace the battery again, equipped with a type-C data cable for charging, safer and more convenient7. Silicone protective case, wrapped in a silicone protective case, effectively prevents drops, protects the multimeter from damage, shockproof and scratch-resistant

Read more less

1. Scope:- Total chlorine: 0-10- Free chlorine, acid-base value (pH): 0-10- PH: 6.8-8.4- Total alkalinity: 0-240- Total hardness: 0-1000- Cyanuric acid, melamine: 0-2402. Fast detection, simple operation3. Easy to use, suitable for the detection of drinking water, swimming pool water quality4. Easy to understand the main six indicators of water quality5. Lightweight plastic bottle outer packaging, tinfoil inner bag, waterproof and moisture-proof, easy to store and carry, to ensure long-term use6. Quantity: 50pcs/bottle7. Size: about 9.6 x 3.6cm

Read more less

1. Soft silicone material 2. High voltage resistant wire rod, strong and tough, anti winding, high and low-temperature resistance 3. High precision steel needle 4. It is not easy to oxidize and can be used for a long time 5. Stainless steel watch needle, lengthened 6. The measurement error will not be caused by touching other components 7. Thin, pointed, long, Measurement of dense and fine devices without fear 8. The tip of the pen adopts an extra sharp steel needle. It is easy to measure fine small devices on a circuit board with dense components and narrow space

Read more less

1. Material: ABS, electronic components2. Application: salinity/PH/TDS/EC/ORP/SG/temperature detection3. Waterproof grade: IP674. Built-in battery: LR44 x 3 (shipped without battery)5. Using highly sensitive glass electrodes, the detection speed is fast and the precision is high6. LCD high-definition display, easy to observe the test results7. Dimensions: 18.3 x 3.7 cm

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Flat head to measure soft flat plate, such as paper, wood board, jewelry, etc.2. Measuring the wall thickness of hollow tubes and round tubes with a curved tip3. The pointed tip measures hard plates, such as steel plates, iron plates, etc.4. The scale is clear and the reading is intuitive5. Measuring range: 0-10mm, 0-20mm, 0-30mm6. Measurement accuracy: 0.1mm7. Display mode: pointer8. Material: alloy

Read more less

1. Real-time monitoring, smart chip, precision fine-tuning, reverse connection protection2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Power display, voltage display, power display, temperature display8. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61x33x14.5mm16. Weight: about 21g

Read more less

1. Real-time monitoring, fine-tuning precision, durable, reverse connection protection, stable and reliable2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile and convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, etc.4. The default battery voltage is 12V when shipped, you need to customize the interface settings, and you need to power off the memory5. Under the normal display interface, short press the setting button to switch the display (turn off the display to enter low power consumption)6. Measurement speed: about 2 seconds/time7. Working air pressure: 80-106 kPa8. Working current: less than or equal to 15mA9. Display mode: multi-angle LCD screen10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 7-68v12. Installation size: 58 x 28mm13. Dimensions: 61x33x14.5mm14. Weight: about 21g

Read more less

1. Real-time monitoring, fine-tuning precision, durable, reverse connection protection, stable and reliable2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile and convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, etc.4. The default battery voltage is 12V when shipped, you need to customize the interface settings, and you need to power off the memory5. Under the normal display interface, short press the setting button to switch the display (turn off the display to enter low power consumption)6. Measurement speed: about 2 seconds/time7. Working air pressure: 80-106 kPa8. Working current: less than or equal to 15mA9. Display mode: multi-angle LCD screen10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 7-68v12. Installation size: 58 x 28mm13. Dimensions: 61x33x14.5mm14. Weight: about 21g

Read more less

1. Real-time monitoring, smart chip, precision fine-tuning, reverse connection protection2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Power display, voltage display, power display, temperature display8. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61x33x14.5mm16. Weight: about 21g

Read more less

1. Real-time monitoring, smart chip, precision fine-tuning, reverse connection protection2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Power display, voltage display, power display, temperature display8. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61x33x14.5mm16. Weight: about 21g

Read more less

1. Adopt high-definition LCD screen design to provide clear and bright display from all angles.2. Monitor battery capacity and voltage with this mini tester.3. Blue backlight, easy to read value in dark environment.4. Widely used in cars, motorcycles, scooters, bicycles, power banks, testing equipment, etc.5. Check the remaining capacity of the battery, and directly display the battery capacity symbol and percentage.6. The instrument has the characteristics of accurate and stable, small size and easy to carry.7. Material: ABS8. Voltage measurement range: DC8V-100V9. Working current: less than 15MA10. Measurement accuracy: +/-1%11. Display: LCD screen12. Measuring speed: about 2 times per second.13. Size: about 6.5x3.5x1.5cm / 2.6x1.4x0.6in14. Installation size: about 58 x 28mm / 2.3x1.1in15. Lead Length: 20cm / 7.9in

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27g

Read more less

1. Adopt high-definition LCD screen design to provide clear and bright display from all angles.2. Monitor battery capacity and voltage with this mini tester.3. Blue backlight, easy to read value in dark environment.4. Widely used in cars, motorcycles, scooters, bicycles, power banks, testing equipment, etc.5. Check the remaining capacity of the battery, and directly display the battery capacity symbol and percentage.6. The instrument has the characteristics of accurate and stable, small size and easy to carry.7. Material: ABS8. Voltage measurement range: DC8V-100V9. Working current: less than 15MA10. Measurement accuracy: +/-1%11. Display: LCD screen12. Measuring speed: about 2 times per second.13. Size: about 6.5x3.5x1.5cm / 2.6x1.4x0.6in14. Installation size: about 58 x 28mm / 2.3x1.1in15. Lead Length: 20cm / 7.9in

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27g

Read more less

1. Adopt high-definition LCD screen design to provide clear and bright display from all angles.2. Monitor battery capacity and voltage with this mini tester.3. Blue backlight, easy to read value in dark environment.4. Widely used in cars, motorcycles, scooters, bicycles, power banks, testing equipment, etc.5. Check the remaining capacity of the battery, and directly display the battery capacity symbol and percentage.6. The instrument has the characteristics of accurate and stable, small size and easy to carry.7. Material: ABS8. Voltage measurement range: DC8V-100V9. Working current: less than 15MA10. Measurement accuracy: +/-1%11. Display: LCD screen12. Measuring speed: about 2 times per second.13. Size: about 6.5x3.5x1.5cm / 2.6x1.4x0.6in14. Installation size: about 58 x 28mm / 2.3x1.1in15. Lead Length: 20cm / 7.9in

Read more less

1. Adopt high-definition LCD screen design to provide clear and bright display from all angles.2. Monitor battery capacity and voltage with this mini tester.3. Blue backlight, easy to read value in dark environment.4. Widely used in cars, motorcycles, scooters, bicycles, power banks, testing equipment, etc.5. Check the remaining capacity of the battery, and directly display the battery capacity symbol and percentage.6. The instrument has the characteristics of accurate and stable, small size and easy to carry.7. Material: ABS8. Voltage measurement range: DC8V-100V9. Working current: less than 15MA10. Measurement accuracy: +/-1%11. Display: LCD screen12. Measuring speed: about 2 times per second.13. Size: about 6.5x3.5x1.5cm / 2.6x1.4x0.6in14. Installation size: about 58 x 28mm / 2.3x1.1in15. Lead Length: 20cm / 7.9in

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27g

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27g

Read more less

Feature:1. It can test electric field strength and magnetic field strength to reach the optimal test result. Its widely used to test and learn electromagnetic radiation situation indoor and outdoor. Suitable to measure the electro-magnetic generated machine, measure low frequency appliance and high frequency radiation appliance.2. One instrument with two uses, it can test the electric field and the magnetic field radiation at the same time.2. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.3. Data locking, one-key lock of the radiation value and easily read the value.4. Measure the Environment Temperature: with 2 temperature units (Celsius and Fahrenheit).5. Radiation assessment, remind you whether the radiation value is safe or not.6. Fashionable design, easy on-hand operation, its easy to carry and make field measurement.Specifications:1. Material: ABS Plastic2. Unit: V/m (Electric Field), micro T / mG(Magnetic Field)3. Accuracy: Electric: 1V/m, Magnetic: 0.01 micro T / 0.1mG4. Range: Electric: 1-1999V/m, Magnetic: 0.01-99.99 micro T / 0.1-999.9mG5. Alarm Threshold: Electric: 40V/m, Magnetic: 0.4 micro T/4mG6. Display: 3-1/2 LCD display7. Test Bandwidth: 5Hz-3500MHz8. Sampling Time: about 0.4 Seconds9. Test Mode: Bimodule Synchronous Test10. Overload Indication: Max value of measurement range on LCD11. Operating Temperature: 0-50 Celsius degree12. Operating Humidity: relative Humidity less than 80%13. Working Voltage: 3.7V14. Power Supply: 3.7V 600mAh lithium battery15. Size: 134 x 61 x 25mm 16. Weight: 131.3g

Read more less

1. Contains 9 sets of power outage saving functions.2. Temporarily store current capacity and energy when power is off.3. Reopen the opportunity to accumulate the current capacity and energy used.4. Manual removal if no accumulation is required.5. Voltage current and capacity display on the same LCD screen, no need for cumbersome operations, only need to connect to the USB interface, you can monitor the phone’s charging status in real time.6. Intelligently memory charging capacity, can save the mAH input from 9 sets of charging devices after power off. Easy to view and check whether the charging device’s capacitance is true.7. U disk current detection, the working current of the u disk is between 50-100mA, when is exceeds 100mA, the u disk may be faulty.8. USB interface voltage detection, the external voltage of the USB interface on the computer is 5V+/-5%, the output current is relatively constant, generally 500mA, and the notebook computer only has 100mA.Specifications:1. Material: ABS2. Color: White, Black3. Current: 0-5A4. Voltage: 4-30V5. Timing: 0-99 hours6. Power: 0-150W7. Capacity: 0-999999mAh8. Inner temperature: 0-80 degree C9. Divide into groups: 0-9 group10. Charging resistance: 0-999.9ohms11. Positive voltage: 0-10V12. Negative voltage: 0-10V13. Item size: 56.6 x 24.7 x 11.2mm14. Item weight: 13.9g15. Package size: 14.7 x 9.4 x 1.2cm/5.78*3.70*0.47in16. Package weight: 17.3g

Read more less