Phone Car Kits

1.Material:ABS2.Color:Black3.Features: Adjustable, portable, flexible, 360 degree rotation Angle 4.Packing size: about 145*95*85mm5.One-handed operation 6.Easy to fold and store 7.The swivel design makes it easy to fold without taking up space. 360-degree rotating design, you can adjust the angle at will

Read more less

1. The holder grips your device tightly and prevents it falling and damage2. Rotate to open or reduce the base of the holder,can adjustable angle and height design,easy to use3. Adjustable and fits firmly in the cup holder for car, truck or SUV,Base expands to fit any vehicle cup holder; no suction or adhesive required 4. The 360-degree rotatable holder provides you with the viewing angle, enhancing your safe driving experience5. Adjustable to hold for all types of 4.5 to 9.5cm mobile phone smart phone, GPS/ PND & PSP devices

Read more less

1. All-around Protection: This Car Phone Holder is made of virgin silicone. The silicone material is soft and stable, with very few strange odors. This enables this car phone holder to better wrap your phone and give it all-around protection2. 360 Degree Adjustable: Although the fixed mobile phone holder is stable, it cannot be adjusted according to changes in the situation. Therefore, this Car Phone Holder is equipped with a 360° adjustment function. You only need to move it gently to use your phone in all directions3. Strong Compatibility: You dont need to worry that you wont be able to use it after purchasing this Car Phone Holder. Because it is compatible with almost all smartphones and is universally used in all car rearview mirrors4. No Tools Required: The phone holder is a product of modern convenience. If the installation of a mobile phone holder requires complicated steps and many tools, it loses its meaning. But this Mobile Phone Holder can be easily installed without tools. This can save your energy5. Safe travel to see the navigation does not look down, clear and clear from the road, convenient and safe

Read more less

1. Large suction cup design, diameter is 110mm, load-bearing up to 5kg, can suck the dashboard and windshield.2. Telescopic arm extends to 43cm, the length can be freely adjusted and can be folded.3. 360 ° free rotation, horizontal and vertical screen switching4. Charging interface design, does not hinder the charging of cell phones.5. Imported PC environmental protection materials, not afraid of sun and cold.6. Special for large vehicles (trucks, buses, excavators, cranes)

Read more less

1. Material: PC/ABS/silica gel/magnet2. 6pcs strong magnets, firmly absorbed, can easily cope with various road conditions3. Vacuum adhesive silicone suction cup, which can firmly adhere to glass, plastic, leather and other surfaces4. Streamline support arm design, not blocking the driver vision5. With magnetic paster, applicable to various mobile phone models6. Product size: 20.5X70cm7. Net weight: about 150g

Read more less

1. Material: PC/ABS/silica gel/magnet2. 6pcs strong magnets, firmly absorbed, can easily cope with various road conditions3. Small size, clips to the vent blade tightly4. It can rotate 360 degrees without blocking the driver vision5. With magnetic paster, applicable to various mobile phone models6. Product size: 11x8cm7. Net weight: about 100g

Read more less

1. Material: PC/ABS/silica gel/magnet2. 6pcs strong magnets, firmly absorbed, can easily cope with various road conditions3. Small size, clips to the vent blade tightly4. It can rotate 360 degrees without blocking the driver vision5. With magnetic paster, applicable to various mobile phone models6. Product size: 7x5.7cm7. Net weight: about 65g

Read more less

1. Material: PC/ABS/silica gel/magnet2. 6pcs strong magnets, firmly absorbed, can easily cope with various road conditions3. Vacuum adhesive silicone suction cup, which can firmly adhere to glass, plastic, leather and other surfaces4. It can rotate 360 degrees without blocking the driver vision5. With magnetic paster, applicable to various mobile phone models6. Product size: 15x6.7cm, length of telescopic rod 15-20cm7. Net weight: about 135g

Read more less

1. Provide you with more flexible and high-end car wireless charging experience. 2. It is installed on the vent through a flexible silicone clip, which is safe and stable. 3. Built-in 360-degree rotating stainless steel ball for angle adjustment. 4. A wireless charging device with strong magnetic and QI standards. 5. Recharge as soon as it is released. Even if there is vibration, it is not easy to fall off. 6. Input: 5V 2.4A/ 9V 2A, output: 15W 7. Size: 65x100x8mm

Read more less

1. Provide you with more flexible and high-end car wireless charging experience. 2. It is installed on the vent through a flexible silicone clip, which is safe and stable. 3. Built-in 360-degree rotating stainless steel ball for angle adjustment. 4. A wireless charging device with strong magnetic and QI standards. 5. Recharge as soon as it is released. Even if there is vibration, it is not easy to fall off. 6. Input: 5V 2A/ 9V 2A, output: 15W 7. Size: 95x65x8mm 8. Need to be used with a specific phone case

Read more less

1. Auto adjustment for precise alignment and efficient charging2. 15W fast wireless charging, compatible with 5W/7.5W/10W/15W wireless charging mobile phones3. Inductive mechanical clamp arms, automatically lock your phone securely once sensing it4. One-hand operation, easy to mount and retrieve your phone5. Support 4.7-7 inch mobile phone6. Material: ABS+Silicone7. External power interface: Type-C8. Input current: 9V/2A 5V/2A9. Size: 13x6.5x2cm10. Weight: about 90g

Read more less

1. Material: PC+ABS2. Suitable for 3.5-6.8 inches mobile phone3. Applicable: adjustable width, any size equipment4. The base is made of PC material, which is flexible and not easy to fall when clamped5. The chuck is made of ABS+PC material, light and durable6. Reasonable design, easy to install and use7. 360-degree rotating body, 90-degree pitch angle adjustable8. Sponge silicone chuck design to prevent damage to car dashboard and mobile phone9. Does not block the mobile phone screen, mobile phone navigation looks directly at the road10. Weight: 105 grams

Read more less

1. Material: PC+ABS2. Suitable for 3.5-6.8 inches mobile phone3. Applicable: adjustable width, any size equipment4. The base is made of PC material, which is flexible and not easy to fall when clamped5. The chuck is made of ABS+PC material, light and durable6. Reasonable design, easy to install and use7. 360-degree rotating body, 90-degree pitch angle adjustable8. Sponge silicone chuck design to prevent damage to car dashboard and mobile phone9. Does not block the mobile phone screen, mobile phone navigation looks directly at the road10. Weight: 105 grams

Read more less

1. 720-degree rotation, fixed by strong magnetic adsorption, not easy to fall2. Compatible with 4.5-6.5-inch mobile phones, suitable for mobile phones with a width of 66-88 mm3. Solid support, golden triangle law, applicable to any orientation4. Intelligent gravity sensor design, automatically tighten when put down, simple and fast5. Do not block the driving line of sight and drive safely6. Reserve volume, power button and other operating areas, you can charge your phone at any time7. Zinc alloy material, scratch-resistant and wear-resistant, prolonging the service life of the bracket8. Weight: 70 grams9. Magnetic force: strong magnetic N28

Read more less

1. 720-degree rotation, fixed by strong magnetic adsorption, not easy to fall2. Compatible with 4.5-6.5-inch mobile phones, suitable for mobile phones with a width of 66-88 mm3. Solid support, golden triangle law, applicable to any orientation4. Intelligent gravity sensor design, automatically tighten when put down, simple and fast5. Do not block the driving line of sight and drive safely6. Reserve volume, power button and other operating areas, you can charge your phone at any time7. Zinc alloy material, scratch-resistant and wear-resistant, prolonging the service life of the bracket8. Weight: 70 grams9. Magnetic force: strong magnetic N28

Read more less

1. Material: ABS, PC, silicone2. Features: strong magnetic attraction, 360-degree rotation3. Take and place with one hand, convenient and quick4. Support 360-degree rotation, adjust the angle as you like5. Strong magnetic attraction, safe and stable6. Folded size: 3.6 x 5.6 x 2 cm7. Expanded size: 3.6 x 5.6 x 6 cm8. Product net weight: 67 grams9. Note: Only the bracket will be shipped, nothing else!

Read more less

1. Material: ABS, PC, silicone2. Features: strong magnetic attraction, 360-degree rotation3. Take and place with one hand, convenient and quick4. Support 360-degree rotation, adjust the angle as you like5. Strong magnetic attraction, safe and stable6. Folded size: 3.6 x 5.6 x 2 cm7. Expanded size: 3.6 x 5.6 x 6 cm8. Product net weight: 67 grams9. Note: Only the bracket will be shipped, nothing else!

Read more less

1. Suitable for mobile phones with wireless charging function2. The surface is equipped with a non-slip silicone ring, which is more stable3. One-hand pick and place, easy to operate4. 360-degree free rotation, the mobile phone can be displayed horizontally or vertically5. The instrument panel/air outlet adopts a universal design to meet the interior space of different scenarios6. Installation method: paste type (center console) / clip type (air outlet)7. Material: metal+silicone+PC

Read more less

1. Material: silicone2. Can be washed and used repeatedly3. Low height does not block the line of sight4. Mobile phone models are universal in size5. Soft, durable and not easy to break6. Dimensions: 120x122x36mm7. Weight: 175 grams

Read more less

1. Material: ABS+Silicone2. Scope of application: suitable for mobile phones/tablets below 8 inches3. Process: reverse injection molding, S/N positive and negative poles form a closed magnetic field4. Strong magnetic adsorption, stable forward5. Structural mechanical design, strong load-bearing capacity, stable and anti-shake6. The built-in universal ball supports 360-degree rotation and can be adjusted horizontally or vertically7. Flexible double-folding curved base, the curved surface can also be firmly pasted8. Product net weight: 29 grams9. Product size: 5.5 x 6.5 x 2.5 cmPacking list:-Bracket x 1-Square iron piece x 2-Glue x 1

Read more less

1. Material: aluminum alloy + ABS2. Gravity linkage rod design, the more shaking the more stable3. Bridge-type load-bearing principle, it can be locked after putting it on4. A charging port is reserved, which is easy to operate and does not block the hole of the mobile phone5. Built-in magnet adsorption, reduce boom impact, no noise6. Eagle mouth silicone chuck, firm and protect the air outlet blades at the same time7. 360-degree rotation, one-hand adjustment, universal rotation ball8. The clamp arm can be adjusted flexibly, suitable for 4-6 inch mobile phone screen9. Dimensions: 10.2x4 cm

Read more less

1. Material: plastic2. Use mobile phone size: 4.7-7 inches3. The shape is small and not easy to block the line of sight4. Gravity damping bracket, low noise5. Can be rotated at any angle to meet various viewing needs6. Reserve the mobile phone charging port, which will not affect the normal operation7. Olecranon clamp and spiral clamp are optional8. Adapt to all kinds of bumpy road conditions, and fast brake smoothly9. Dimensions: 109x92mm10. Weight: about 52 grams

Read more less

1. Material: plastic2. Use mobile phone size: 4.7-7 inches3. The shape is small and not easy to block the line of sight4. Gravity damping bracket, low noise5. Can be rotated at any angle to meet various viewing needs6. Reserve the mobile phone charging port, which will not affect the normal operation7. Olecranon clamp and spiral clamp are optional8. Adapt to all kinds of bumpy road conditions, and fast brake smoothly9. Dimensions: 109x92mm10. Weight: about 52 grams

Read more less

1. Material: plastic2. Use mobile phone size: 4.7-7 inches3. The shape is small and not easy to block the line of sight4. Gravity damping bracket, low noise5. Can be rotated at any angle to meet various viewing needs6. Reserve the mobile phone charging port, which will not affect the normal operation7. Olecranon clamp and spiral clamp are optional8. Adapt to all kinds of bumpy road conditions, and fast brake smoothly9. Dimensions: 109x92mm10. Weight: about 52 grams

Read more less

1. Material: plastic2. Use mobile phone size: 4.7-7 inches3. The shape is small and not easy to block the line of sight4. Gravity damping bracket, low noise5. Can be rotated at any angle to meet various viewing needs6. Reserve the mobile phone charging port, which will not affect the normal operation7. Olecranon clamp and spiral clamp are optional8. Adapt to all kinds of bumpy road conditions, and fast brake smoothly9. Dimensions: 109x92mm10. Weight: about 52 grams

Read more less

1. Material: aluminum alloy + ABS2. Gravity linkage rod design, the more shaking the more stable3. Bridge-type load-bearing principle, it can be locked after putting it on4. A charging port is reserved, which is easy to operate and does not block the hole of the mobile phone5. Built-in magnet adsorption, reduce boom impact, no noise6. Eagle mouth silicone chuck, firm and protect the air outlet blades at the same time7. 360-degree rotation, one-hand adjustment, universal rotation ball8. The clamp arm can be adjusted flexibly, suitable for 4-6 inch mobile phone screen9. Dimensions: 10.2x4 cm

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. 960 degree rotation angle to meet different viewing needs.2. Press the rotation button to freely adjust the angle, which is convenient and quick, stable and does not shake.3. Easy to install, 5-25mm adjustable clamping distance, rotating spiral locking4. Upgraded spring phone clip, 6-8.5cm adjustable width, compatible with 4-6.7 inch phones.5. Material: ABS+silicone6. Weight: 95g

Read more less

1. 3-axis locking structure, firmly grasping the rearview mirror.2. 360 degree free adjustment angle, foldable without obstructing the driver view.3. Upgrade the spring phone clip to be compatible with 4-6.7 inch phones.4. Material: ABS+silicone5. Weight: 134g

Read more less

1. Strong magnetic force, super stable hold2. Soft silicone surface, safeguard your phone, would not interfere with signal3. Flexible base, fits snugly on the dash, firm & stable4. Small size, would not block air vent or driver view5. Easy to install, one-handed operation, 360 degrees free rotation6. Material: Zinc alloy+ABS+silicone+magnet7. Output power: 15W max8. Applicable scenario: car air outlet9. Size: 6.35x6.35x9cm10. Weight: 70g

Read more less

1. 320 degree free flip and adjust the viewing angle as you like.2. Adjustable base size, suitable for cup holders of various vehicle models3. Thickened silicone pad to prevent damage to the car and phone4. Open the clamping arm with one click, making it easy to access and place the phone5. Material: ABS+silicone6. Clamp mouth: 4-6.7 inches, 5.5-9cm7. Weight: 211g

Read more less

1. Material: Metal+ABS+Silicone2. Weight: 54g3. Installation method: paste type (magnetic suction type)4. Usage scenario: center console5. Easy to install, support flat and curved surface pasting6. One-handed pick and place, fully automatic operation, one-handed locking, convenient and quick7. Built-in universal ball rotating connection, free to rotate at multiple angles, and adjust the viewing angle at will8. Using strong non-marking glue, it is firmly pasted and not easy to fall off, and no trace is left when disassembling and assembling9. Anti-winding design, there is a data cable clip on the back of the bracket, and the storage is neat and convenient10. Applicable mobile phone range: 4-7 inch mobile phone

Read more less

1. Material: ABS+PC+Silicone2. Weight: 102g3. Application scenarios: rearview mirror / instrument panel / sun visor4. The horizontal angle can be rotated 180 degrees, which is convenient for storage when not in use5. Thickened non-slip pads to better protect the dashboard and your phone6. Support horizontal and vertical screen angle adjustment switching7. 360-degree rotation, free to adjust to your comfortable angle8. Strong spring, buckle base, stable and not shaking when encountering bumps9. Applicable equipment: suitable for mobile phones with a width of 5.7-10cm

Read more less

1. The mobile phone holder and the number card are combined into one, saving space in the car2. The heightened clamp arm design is not only beautiful, but also can easily clamp the folding screen3. Universal ball head design, 360-degree full rotation, satisfying multi-angle viewing angles4. The four-point principle of mechanics, more focused on the tight gear structure, quiet and no abnormal noise, no distraction5. Do not cover the buttons, reserve the charging port6. Center console windshield, multi-directional use7. Automatic locking device, one-handed use without pressure8. Weight: 290 grams

Read more less

1. Material: ABS+Silicone2. Size: 150x130x65mm3. Press lightly to insert and lock the CD port, it is stable and not easy to fall4. 360-degree universal ball rotation setting, free to adjust the use angle5. Add a silicone pad to the CD interface, which is shock-absorbing and non-slip, and will not hurt your car and mobile phone6. Easy to pick and place with one button, easy to install, easy to operate, convenient and quick to use7. Applicable mobile phone range: suitable for 4.7-7.4 inch mobile phones8. Applicable scene: car CD port

Read more less

1. Auto clip design, easy to take with one hand, safe driving.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Anti-Scratch Protection: non-slip silicone craws of the holder.5. Specification:- Material: ABS+ anodized aluminum alloy + strong PU glue- Rotation: 360 angle- Clip: 4-6 inch mobile phone, 45-190mm

Read more less

1. Material: ABS+Silicone2. Weight: 200g3. Installation method: paste type4. Use scene: car center console / air outlet5. Corrugated base design, can be attached to flat or curved surface6. One-handed operation, easy to take and place, put it down to absorb and fix, convenient and quick7. Using four N50 rubidium magnets, strong magnetic adsorption without fear of bumps, stable and not easy to fall8. Support horizontal and vertical screen switching, and can be freely adjusted to your comfortable use angle by 360-degree rotation9. A data cable storage clip is added on the back of the bracket to prevent wire entanglement, which is practical and convenient10. Using strong non-marking glue, sticking and removing without leaving traces11. Applicable equipment: mobile phone/tablet

Read more less

1. With hole design for charging.2. Designed sponge and silicone gasket for protecting the mobile phone, multi protection.3. Compatible with mobile phones or tablets with a width or length of 115-195mm.4. Silicone layer to protect your device better, won not scratch.5. Adjustable folding arm can be used for different kinds of headrest, size 130-178mm.6. 360 degrees rotating adjust the holder to fit your need.7. Material: ABS+silicone+stainless steel spring

Read more less

1. Premium aluminum alloy and silicone mat material, durable to use.2. Strongly magnetic adsorption, not easy to fall off.3. Can be used in many positions, such as car, home, kitchen, bedside table, desk, etc..4. Mini size in shape, easily pick up.5. Material: PC + aviation aluminum + silicone + N50 magnet

Read more less

1. Strong adsorption, not easy for the phone to drop off.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Adjust the mount to your most desired, convenient and comfortable angle and lengthand position. You can swing or position magnetic mount arm to an angle of up to 220 degrees, adding more flexibility and versatility in its usage or purpose.5. Material: ABS+ aluminum alloy + PU glue + N50 magnet

Read more less

1. Duckbill clips design, more steady on air outlet when using. 2. Thickened silicone pad, stable and non-slip. 3. 5pcs N50 magnet, strong adsorption, holding firmly. 4. Closed magnetic field design, ensure strong magnet but no adverse effect to the mobile signal. 5. Material: aluminum alloy + silicone + ABS + magnet

Read more less

1. Strong magnet adsorption stable mobile phone holder, do not fall off.2. Can be used in many positions, such as car, home, kitchen, bedside table, desk.3. Premium aluminum alloy shell and silicone mat.4. Super mini body, 2.5cm, you can put it anywhere.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Strong magnet adsorption stable mobile phone holder, do not fall off.2. Can be used in many positions, such as car, home, kitchen, bedside table, desk.3. Premium aluminum alloy shell and silicone mat.4. Super mini body, 2.5cm, you can put it anywhere.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Compatible mobile phone size for 4 inch to 7.0 inch. Universal design that is compatible to all mobile phones. 2. The simple yet elegant and classy andbreakthrough designs havebeen so successful that Yesido keeps onsetting their quality way above the rest.3. Flexible and safe non-slip silicone surface protruding 0.3mm above the base will not cause scratches on the phone.4. Design that is suitable for a wide range of applications. Can be used at home, at the office and of course inside the vehicle.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Compatible mobile phone size for 4 inch to 7.0 inch. Universal design that is compatible to all mobile phones. 2. The simple yet elegant and classy andbreakthrough designs havebeen so successful that Yesido keeps onsetting their quality way above the rest.3. Flexible and safe non-slip silicone surface protruding 0.3mm above the base will not cause scratches on the phone.4. Design that is suitable for a wide range of applications. Can be used at home, at the office and of course inside the vehicle.5. Material: zinc alloy + N50 magnet + silicone + foam glue

Read more less

1. Strong adsorption, not easy for the phone to drop off.2. 360 degree rotating, adjust the angle with one hand.3. Easily mount and remove your phone with one simple hand motion.4. Material: zinc alloy + N50 magnet + silicone + foam glue5. Rotation: 360 angle

Read more less

1. Material: ABS+silicone2. Use location: center console, windshield3. Gear structure, high linkage, more stable gravity tightening4. 360-degree rotating ball head, the angle can be adjusted arbitrarily5. Non-slip silicone, soft and stable, using alloy material clip arm, will not hurt the phone6. Telescopic hook base air outlet clip, free to adjust the tightness7. The appearance of the streamlined bracket does not block the line of sight8. Optimize the acoustic structure to create a comfortable and quiet environment9. Stable upgrade, easy to deal with various special road conditions10. Universal mobile phone size 4.0-7.0 inches11. Net weight: 0.085 kg12. Product size: 9.5x9x10 cm

Read more less