Motorola Replacement Parts

1069 products


  • LCD Screen and Digitizer Full Assembly for Motorola Moto G 5G Plus XT2075 XT2075-2 XT2075-3-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G 5G Plus XT2075 XT2075-2 XT2075-3

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G 5G Plus XT2075 XT2075-2 XT2075-3 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €37,16

  • TFT LCD Screen For Motorola Moto G31 / G41 / G71 / Moto G42 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen For Motorola Moto G31 / G41 / G71 / Moto G42 with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G31/G41/G71 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Motorola:  Moto G31 , Moto G41 , Moto G71 5G Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €22,64

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G30 XT2129-2 PAML0000IN-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G30 XT2129-2 PAML0000IN

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G30 XT2129-2 PAML0000IN 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €16,02

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G8 Power-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G8 Power

    About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G8 Power. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €24,62

  • Original Charging Port Board for Motorola Moto G9 Power-garmade.com

    Original Charging Port Board for Motorola Moto G9 Power

    1. Charging port board replacement for Motorola Moto G9 Power. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €8,68

  • TFT LCD Screen For Motorola Moto E32/E32S with Digitizer Full Assembly-garmade.com

    TFT LCD Screen For Motorola Moto E32/E32S with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto E32/E32S 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Motorola:  Moto E32s Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €17,42

  • SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Moto G8 Power (Blue)-garmade.com

    SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Moto G8 Power (Blue)

    1. SIM card tray + SIM card tray / Micro SD card tray for Motorola Moto G8 Power. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €3,68

  • Battery Back Cover for Motorola Moto G6 Plus(Black)-garmade.com

    Battery Back Cover for Motorola Moto G6 Plus(Black)

    1. Back cover replacement for Motorola Moto G6 Plus 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €6,44

  • Charging Port Board for Motorola Moto G8 Power Lite-garmade.com

    Charging Port Board for Motorola Moto G8 Power Lite

    1. Charging port board replacement for Motorola Moto G8 Power Lite. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €5,32

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G8 Power Lite-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G8 Power Lite

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G8 Power Lite. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    €16,02

  • Fingerprint Sensor Flex Cable for Motorola Moto G9 Play(Dark Blue)-garmade.com

    Fingerprint Sensor Flex Cable for Motorola Moto G9 Play(Dark Blue)

    1. Fingerprint sensor flex cable replacement for Motorola Moto G9 Play. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €7,20

  • TFT LCD Screen for Motorola Moto G22 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Motorola Moto G22 with Digitizer Full Assembly

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G22. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Motorola:  Moto G22 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €17,42

  • For Motorola Moto G32 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)-garmade.com

    For Motorola Moto G32 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM Card Tray + SIM Card Tray + Micro SD Card Tray for Motorola Moto G32. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. Specification: General Compatible with Motorola:  Moto G32 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 5cm * 5cm * 0.5cm / 1.97inch * 1.97inch * 0.2inch Qty per Carton 1000 Carton Weight 1.00kgs / 2.20lb Carton Size 30cm * 22cm * 30cm / 11.81inch * 8.66inch * 11.81inch Loading Container 20GP: 1346 cartons * 1000 pcs = 1346000 pcs 40HQ: 3126 cartons * 1000 pcs = 3126000 pcs

    €4,10

  • LCD Screen and Digitizer Full Assembly for Motorola Moto E7i Power / E7 Power XT2097-13 PAMH0001IN PAMH0010IN PAMH0019IN-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto E7i Power / E7 Power XT2097-13 PAMH0001IN PAMH0010IN PAMH0019IN

    About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto E7i Power / E7 Power XT2097-13 PAMH0001IN PAMH0010IN PAMH0019IN. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €16,02

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G7 Plus(Black)-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G7 Plus(Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G7 Plus 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €23,12

  • Charging Port Board for Motorola Moto G8 Power-garmade.com

    Charging Port Board for Motorola Moto G8 Power

    1. Charging port board replacement for Motorola Moto G8 Power. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €5,64

  • Charging Port Board for Motorola Moto G8 Plus-garmade.com

    Charging Port Board for Motorola Moto G8 Plus

    1. Charging port board replacement for Motorola Moto G8 Plus. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €5,32

  • Battery Back Cover for Motorola Moto One Vision(Blue)-garmade.com

    Battery Back Cover for Motorola Moto One Vision(Blue)

    1. Back cover replacement for Motorola Moto One Vision 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €6,52

  • Fingerprint Sensor Flex Cable for Motorola Moto G7 Plus(Black)-garmade.com

    Fingerprint Sensor Flex Cable for Motorola Moto G7 Plus(Black)

    1. Fingerprint sensor flex cable replacement for Motorola Moto G7 Plus. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €5,30

  • EDA005153422.jpg@6b5004dd68f54b10cae2f3920b14bce5

    For Motorola Edge 20 Original Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with Motorola:  Edge 20 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 8.00kgs / 17.64lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €13,48

  • TFT LCD Screen for Motorola Moto G30 XT2129-1 XT2129-2 Digitizer Full Assembly with Frame (Black)-garmade.com

    TFT LCD Screen for Motorola Moto G30 XT2129-1 XT2129-2 Digitizer Full Assembly with Frame (Black)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly with frame for Motorola Moto G30 XT2129-1 XT2129-2. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Motorola:  Moto G30 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €18,74

  • TFT LCD Screen for Motorola Moto G9 Plus XT2087-1 Digitizer Full Assembly with Frame (Black)-garmade.com

    TFT LCD Screen for Motorola Moto G9 Plus XT2087-1 Digitizer Full Assembly with Frame (Black)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly with frame for Motorola Moto G9 Plus XT2087-1. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Motorola:  Moto G9 Plus Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €30,74

  • LCD Screen and Digitizer Full Assembly for Motorola MOTO G7 Power, EU Version(Black)-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola MOTO G7 Power, EU Version(Black)

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. 1. Replacement LCD display + touch screen digitizer assembly for Motorola MOTO G7 Power, EU Version. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    €16,02

  • Motherboard Flex Cable for Motorola Moto G8 Power-garmade.com

    Motherboard Flex Cable for Motorola Moto G8 Power

    1. Motherboard flex cable ribbon replacement for Motorola Moto G8 Power 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €4,98

  • LCD Screen and Digitizer Full Assembly for Motorola One Hyper-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola One Hyper

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola One Hyper. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    €21,10

  • Fingerprint Sensor Flex Cable for Motorola Moto G7 Plus(Blue)-garmade.com

    Fingerprint Sensor Flex Cable for Motorola Moto G7 Plus(Blue)

    1. Fingerprint sensor flex cable replacement for Motorola Moto G7 Plus. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €5,30

  • Replacement Battery Back Cover for Motorola Moto G9 Plus XT2087-1(Blue)-garmade.com

    Replacement Battery Back Cover for Motorola Moto G9 Plus XT2087-1(Blue)

    1. Back cover replacement for Motorola Moto G9 Plus XT2087-1 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €6,04

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Power XT2091-3-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Power XT2091-3

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G9 Power XT2091-3 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    €18,12

  • TFT LCD Screen for Motorola Moto E20 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Motorola Moto E20 with Digitizer Full Assembly

    About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto E20. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Motorola:  Moto E20 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €16,08

  • LCD Screen and Digitizer Full Assembly for Motorola Moto E40 / E30-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto E40 / E30

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto E40. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Motorola:  Moto E40 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €17,48

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G5 Plus(Black)-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G5 Plus(Black)

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G5 Plus 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €17,56

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G60 / Moto G40 Fusion PANB0001IN PANB0013IN PANB0015IN PANV0001IN PANV0005IN PANV0009IN-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G60 / Moto G40 Fusion PANB0001IN PANB0013IN PANB0015IN PANV0001IN PANV0005IN PANV0009IN

    About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G60 / Moto G40 Fusion PANB0001IN PANB0013IN PANB0015IN PANV0001IN PANV0005IN PANV0009IN. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €22,16

  • Power Button & Volume Button Flex Cable for Motorola Moto G10 XT2127-2-garmade.com

    Power Button & Volume Button Flex Cable for Motorola Moto G10 XT2127-2

    1. Volume button & power button flex cable replacement for Motorola Moto G10 XT2127-2. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €4,08

  • SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Moto E7 Power PAMH0001IN PAMH0010IN PAMH0019IN (Blue)-garmade.com

    SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Moto E7 Power PAMH0001IN PAMH0010IN PAMH0019IN (Blue)

    1. SIM card tray + SIM card tray / Micro SD card tray for Motorola Moto E7 Power PAMH0001IN PAMH0010IN PAMH0019IN. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €4,08

  • Power Button and Volume Control Button for Motorola Moto One Action XT2013-1 XT2013-2 XT2013-4 (Silver)-garmade.com

    Power Button and Volume Control Button for Motorola Moto One Action XT2013-1 XT2013-2 XT2013-4 (Silver)

    1. Power button and volume control button replacement for Motorola Moto One Action XT2013-1 XT2013-2 XT2013-4 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €4,08

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G100 / Edge S-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G100 / Edge S

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G100 / Edge S 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    €36,16

  • Battery Back Cover for Motorola Moto G7 Plus(Red)-garmade.com

    Battery Back Cover for Motorola Moto G7 Plus(Red)

    1. Back cover replacement for Motorola Moto G7 Plus 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €6,50

  • Battery Back Cover for Motorola Moto G7 (Black)-garmade.com

    Battery Back Cover for Motorola Moto G7 (Black)

    1. Back cover replacement for Motorola Moto G7 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €5,98

  • Power Button & Volume Button Flex Cable for Motorola Moto G5S-garmade.com

    Power Button & Volume Button Flex Cable for Motorola Moto G5S

    1. Volume button & power button flex cable replacement for Motorola Moto G5S. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €3,74

  • Charging Port Board for Motorola Moto G5-garmade.com

    Charging Port Board for Motorola Moto G5

    1. Charging port board replacement for Motorola Moto G5. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €4,42

  • Power Button & Volume Button Flex Cable for Motorola One Hyper-garmade.com

    Power Button & Volume Button Flex Cable for Motorola One Hyper

    1. Volume button & power button flex cable replacement for Motorola One Hyper 2. Replace your broken or unusable one with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

    €4,10

  • Charging Port Board for Motorola Moto G8-garmade.com

    Charging Port Board for Motorola Moto G8

    1. Charging port board replacement for Motorola Moto G8. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €4,96

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Play / Moto G9 (India) / Moto E7 Plus XT2081-1-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Play / Moto G9 (India) / Moto E7 Plus XT2081-1

    Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G9 Play / Moto G9 / Moto E7 Plus XT2081-1. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

    €16,02

  • LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Plus XT2087-1-garmade.com

    LCD Screen and Digitizer Full Assembly for Motorola Moto G9 Plus XT2087-1

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G9 Plus XT2087-1 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €26,78

  • Fingerprint Sensor Flex Cable for Motorola Moto G7 Play/Moto G7 Power XT1955(Blue)-garmade.com

    Fingerprint Sensor Flex Cable for Motorola Moto G7 Play/Moto G7 Power XT1955(Blue)

    1. Fingerprint sensor flex cable replacement for Motorola Moto G7 Play/Moto G7 Power XT1955. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €7,22

  • SIM Card Tray + SIM Card Tray + Micro SD Card Tray for Motorola Moto E6 Play/XT2029/XT2029-1(Black)-garmade.com

    SIM Card Tray + SIM Card Tray + Micro SD Card Tray for Motorola Moto E6 Play/XT2029/XT2029-1(Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Motorola Moto E6 Play/XT2029/XT2029-1. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €3,68

  • SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Edge XT2063-3 (Black)-garmade.com

    SIM Card Tray + SIM Card Tray / Micro SD Card Tray for Motorola Edge XT2063-3 (Black)

    1. SIM card tray + SIM card tray / Micro SD card tray for Motorola Edge XT2063-3. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €4,94

  • EDA006149014.jpg@093e4ce694997773823cd33e21ce3098

    For Motorola Moto G54 OEM LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Motorola:  Moto G54 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €34,46

Login

Forgot your password?

Don't have an account yet?
Create account