Tecno Replacement Parts

322 products


  • TFT LCD Screen for Tecno Camon 16 S with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Camon 16 S with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 16 S 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with TECNO:  Camon 16 S Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €16,86

  • LCD Screen and Digitizer Full Assembly for Tecno Spark Go 2020 / Spark 6 Go-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Spark Go 2020 / Spark 6 Go

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark Go 2020 / Spark 6 Go 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €14,78

  • TFT LCD Screen for Tecno Camon 17 CG6, CG6j with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Camon 17 CG6, CG6j with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 17 CG6, CG6j 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 17 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €15,88

  • For Tecno Spark 5 Pro Charging Port Board-garmade.com

    For Tecno Spark 5 Pro Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Spark 5 pro Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 8.00kgs / 17.64lb Carton Size 34cm * 27cm * 27cm / 13.39inch * 10.63inch * 10.63inch Loading Container 20GP: 1075 cartons * 1000 pcs = 1075000 pcs 40HQ: 2497 cartons * 1000 pcs = 2497000 pcs

    €4,42

  • For Tecno Pova LD7 Charging Port Board-garmade.com

    For Tecno Pova LD7 Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Pova Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 34cm * 27cm * 27cm / 13.39inch * 10.63inch * 10.63inch Loading Container 20GP: 1075 cartons * 1000 pcs = 1075000 pcs 40HQ: 2497 cartons * 1000 pcs = 2497000 pcs

    €4,42

  • LCD Screen and Digitizer Full Assembly for Tecno Camon 15 CD7-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Camon 15 CD7

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 15 CD7 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €16,96

  • EDA005072304.jpg@61012d2110d6a7c021b8a378cac6996c

    For Tecno Camon 12 Pro OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Camon 12 Pro Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 14.00kgs / 30.86lb Carton Size 32cm * 27cm * 32cm / 12.6inch * 10.63inch * 12.6inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs

    €4,98

  • EDA006161505.jpg@2e98b07faab3425191bcdfebc6f0430f

    For Tecno Spark 10 Pro KI7 OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Spark 10 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €24,28

  • EDA006161101.jpg@80e0eb1991e24337dc8ca3a4043235b4

    For Tecno Phantom X2 Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Phantom X2 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €104,78

  • EDA005072309.jpg@fb167d1863f791dfd2b6290cee8e9976

    For Tecno Pop 6 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Pop 6 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 10.00kgs / 22.05lb Carton Size 32cm * 27cm * 32cm / 12.6inch * 10.63inch * 12.6inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs

    €4,98

  • SPS7455B.jpg@393af4b4efa964a9ca99498264ea625d

    For Tecno Pop 7 BF6 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Tecno Pop 7 BF6. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. Specification: General Compatible with TECNO:  Pop 7 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €3,72

  • SPS7442B.jpg@6bcc77470fc624f3f51487863e5e5dec

    For Tecno Spark 7T SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Tecno Spark 7T. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with TECNO:  Spark 7T Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €3,72

  • OEM LCD Screen For Tecno Camon 19 CI6n / 19 Pro / 19 Pro 5G with Digitizer Full Assembly-garmade.com

    OEM LCD Screen For Tecno Camon 19 CI6n / 19 Pro / 19 Pro 5G with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 19 CI6n / 19 Pro / 19 Pro 5G 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 19 , Camon 19 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €22,56

  • OEM LCD Screen For Tecno Spark 7 Digitizer Full Assembly with Frame-garmade.com

    OEM LCD Screen For Tecno Spark 7 Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Tecno Spark 7 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Spark 7 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €21,02

  • OEM LCD Screen For Tecno Camon 17 Pro Digitizer Full Assembly with Frame-garmade.com

    OEM LCD Screen For Tecno Camon 17 Pro Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Tecno Camon 17 Pro 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 17 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €38,40

  • For Tecno Camon 12 CC7S Charging Port Board-garmade.com

    For Tecno Camon 12 CC7S Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Camon 12 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 34cm * 27cm * 27cm / 13.39inch * 10.63inch * 10.63inch Loading Container 20GP: 1075 cartons * 1000 pcs = 1075000 pcs 40HQ: 2497 cartons * 1000 pcs = 2497000 pcs

    €4,42

  • For Tecno Spark 5 Air KD6a OEM Charging Port Board-garmade.com

    For Tecno Spark 5 Air KD6a OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Spark 5 Air Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €4,42

  • For Tecno Camon 18 OEM Charging Port Board-garmade.com

    For Tecno Camon 18 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  CAMON 18 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 8.00kgs / 17.64lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €4,42

  • For Tecno Spark 8P / Spark 8T OEM Charging Port Board-garmade.com

    For Tecno Spark 8P / Spark 8T OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Spark 8T Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €5,00

  • For Tecno Pop 5 LTE BD4, BD4i, BD4a OEM Charging Port Board-garmade.com

    For Tecno Pop 5 LTE BD4, BD4i, BD4a OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  POP 5 LTE Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 5cm * 1cm / 1.97inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    €5,00

  • TFT LCD Screen for Tecno Camon 16 Pro with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Camon 16 Pro with Digitizer Full Assembly

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 16 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with TECNO:  Camon 16 Pro Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €20,06

  • TFT LCD Screen for Tecno Spark 7P KF7j with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Spark 7P KF7j with Digitizer Full Assembly

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 7P KF7j 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with TECNO:  Spark 7P Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €17,00

  • TFT LCD Screen for Tecno Spark 5 Air KD6a with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Spark 5 Air KD6a with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 5 Air KD6a 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with TECNO:  Spark 5 Air Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €18,76

  • TFT LCD Screen for Tecno Camon 18 CH6 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Tecno Camon 18 CH6 with Digitizer Full Assembly

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 18 CH6 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with TECNO:  CAMON 18 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 12cm * 5cm / 9.84inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €23,12

  • TFT LCD Screen For Tecno Pova Neo LE6 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen For Tecno Pova Neo LE6 with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pova Neo LE6 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  POVA Neo Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €15,88

  • For Tecno Pouvoir 4/Pouvoir 4 Pro Charging Port Board-garmade.com

    For Tecno Pouvoir 4/Pouvoir 4 Pro Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Pouvoir 4 , Pouvoir 4 pro Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 34cm * 27cm * 27cm / 13.39inch * 10.63inch * 10.63inch Loading Container 20GP: 1075 cartons * 1000 pcs = 1075000 pcs 40HQ: 2497 cartons * 1000 pcs = 2497000 pcs

    €5,00

  • For Tecno Spark 7 KF6 KF6i KF6k Charging Port Board-garmade.com

    For Tecno Spark 7 KF6 KF6i KF6k Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with TECNO:  Spark 7 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 34cm * 27cm * 27cm / 13.39inch * 10.63inch * 10.63inch Loading Container 20GP: 1075 cartons * 1000 pcs = 1075000 pcs 40HQ: 2497 cartons * 1000 pcs = 2497000 pcs

    €4,42

  • 10 PCS Back Camera Lens for Tecno Spark 5 Air KD6a-garmade.com

    10 PCS Back Camera Lens for Tecno Spark 5 Air KD6a

    1. Replacement back camera lens for Tecno Spark 5 Air KD6a. 2. Replace the old, broken, cracked, damaged one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €5,32

  • 10 PCS Back Camera Lens for Tecno Camon 16 / Camon 16 Premier CE7, CE7j, CE9h, CE9, CD6j-garmade.com

    10 PCS Back Camera Lens for Tecno Camon 16 / Camon 16 Premier CE7, CE7j, CE9h, CE9, CD6j

    1. Replacement back camera lens for Tecno Camon 16 / Camon 16 Premier CE7, CE7j, CE9h, CE9, CD6j. 2. Replace the old, broken, cracked, damaged one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    €5,32

  • Charging Port Board for Tecno Spark 5 KE5-garmade.com

    Charging Port Board for Tecno Spark 5 KE5

    1. Charging port board replacement for Tecno Spark 5 KE5. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    €4,98

  • LCD Screen and Digitizer Full Assembly for Tecno Camon 11 CF7,CF7K-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Camon 11 CF7,CF7K

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 11 CF7,CF7K 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    €18,76

  • LCD Screen and Digitizer Full Assembly for Tecno Camon 12-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Camon 12

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Camon 12 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €14,46

  • LCD Screen and Digitizer Full Assembly for Tecno Spark 4 Lite-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Spark 4 Lite

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 4 Lite 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    €14,46

  • LCD Screen and Digitizer Full Assembly for Tecno Spark 6 KE7-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Spark 6 KE7

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 6 KE7 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    €17,46

  • LCD Screen and Digitizer Full Assembly for Tecno Pova LD7-garmade.com

    LCD Screen and Digitizer Full Assembly for Tecno Pova LD7

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pova LD7 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    €17,84

  • EDA006161102.jpg@80e0eb1991e24337dc8ca3a4043235b4

    For Tecno Phantom X2 Pro Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Phantom X2 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €104,78

  • EDA006161106.jpg@b3b9a03d11aa419af815788c5bd0376a

    For Tecno Camon 20 Premier Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Premier Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €77,68

  • EDA006161509.jpg@45046d27a24d2237f8e2cbdc95525ff7

    For Tecno Pova Neo 3 LH6n OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Pova Neo 3 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €18,72

  • EDA006161104.jpg@b3b9a03d11aa419af815788c5bd0376a

    For Tecno Camon 20 Pro Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €77,68

  • EDA006161105.jpg@b3b9a03d11aa419af815788c5bd0376a

    For Tecno Camon 20 Pro 5G Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Pro 5G Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €77,68

  • EDA006161510.jpg@df931e9c8ca2a3412ff8d6d7c1b50969

    For Tecno Pova 5 Pro LH8n OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Pova 5 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €23,50

  • EDA006161103.jpg@b3b9a03d11aa419af815788c5bd0376a

    For Tecno Camon 20 Original LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €77,68

  • EDA006161501.jpg@f3f9498440056d4c3c717c828e44cc4d

    For Tecno Camon 20 OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €31,08

  • EDA006161506.jpg@8f4adb055b7db33ef25310f7310d3500

    For Tecno Spark 10 KI5q OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Spark 10 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €16,58

  • EDA006161504.jpg@f3f9498440056d4c3c717c828e44cc4d

    For Tecno Camon 20 Premier OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Premier Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €31,08

  • EDA006161507.jpg@8f4adb055b7db33ef25310f7310d3500

    For Tecno Spark 10C KI5k OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Spark 10C Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €16,58

  • EDA006161502.jpg@f3f9498440056d4c3c717c828e44cc4d

    For Tecno Camon 20 Pro OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €31,08

  • EDA006161503.jpg@f3f9498440056d4c3c717c828e44cc4d

    For Tecno Camon 20 Pro 5G OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO:  Camon 20 Pro 5G Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    €31,08

Login

Forgot your password?

Don't have an account yet?
Create account