DJI Avata Series

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design2. The internal is made by pearl cotton, protect your drone well3. Can be hand-held, with anti-slip design handle4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear6. Size: 28 x 23 x 10cm7. Weight: 334g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design2. The internal is made by pearl cotton, protect your drone well3. Can be hand-held, with anti-slip design handle4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear6. Size: 27 x 23 x 10cm7. Weight: 334g

Read more less

1. Quality PP material, dustproof, moisture-proof. 2. Double sponge and hardshell, Shockproof and anti-fall. 3. Can storage unmanned aerial vehicles and other accessories at the same time. 4. Easy to carry, suitable for outdoor activities. 5. Material: PP Plastic 6. Color: Black 7. Size: 33x27x11.5cm(L x W x H) 8. Weight: 1028g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design2. The internal is made by pearl cotton, protect your drone well3. Can be hand-held, with anti-slip design handle4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear6. Size: 27 x 23 x 10cm7. Weight: 334g

Read more less

1. Large capacity, very practical and convenient to use. Durable and wear-resistant, sturdy enough.2. Pre-cut foam holds everything in place to prevent scratches, collisions and drops.3. Adjustable shoulder straps and a side handle, you can easily carry the case in two ways.4. Highly resistant to pressure, drop and shock absorption, spill-resistant fabric, all-round protection for your equipment5. Two-way zipper, open and close smoothly without jamming6. Material: PC + ABS + Oxford cloth + EVA7. Weight: 1065g8. Size: 40 x 28 x 15cm

Read more less

1. Pressure and wear resistance, good waterproof, fit the body2. Large-capacity partition storage, can hold the aircraft / motion controller/ propeller / data line / aircraft and Goggles battery / Goggles 2 or Goggles V23. EVA liner, good shock absorption, holds everything in place to prevent scratches, collisions and drops.4. Upgraded locking buckle, easy to open and close, higher tightness5. Compatible models: for DJI Avata6. Material: PP+EVA+pearl cotton7. Weight: 1640g8. Size: 41 x 33.5 x 13cm

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 39 x 28 x 15cm 7. Weight: 828g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 39 x 28 x 15cm 7. Weight: 869g

Read more less

1. Face shield silicone protective cover, wear-resistant and dirt-resistant, to protect the face contact surface of the flight glasses from sweat / oil / cosmetic erosion.2. Soft silicone, surface oil spraying treatment, smooth and comfortable to touch, can be kneaded at will, not easy to deformation3. Easy to replace, easy to clean, convenient and hygienic.4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine to wear comfortable.5. Non-slip texture design, not easy to slide off6. Material: silicone7. Applicable models: Suitable for DJI Avata Goggles 28. Net weight: 25.5g9. Product size: 18 x 9.5 x 4cmPacking list:1 piece protective cover

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 30 x 32 x 13.5cm 7. Weight: 778g

Read more less

1. Face shield silicone protective cover, wear-resistant and dirt-resistant, to protect the face contact surface of the flight glasses from sweat / oil / cosmetic erosion.2. Soft silicone, surface oil spraying treatment, smooth and comfortable to touch, can be kneaded at will, not easy to deformation3. Easy to replace, easy to clean, convenient and hygienic.4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine to wear comfortable.5. Non-slip texture design, not easy to slide off6. Material: silicone7. Applicable models: Suitable for DJI Avata Goggles 28. Net weight: 25.5g9. Product size: 18 x 9.5 x 4cmPacking list:1 piece protective cover

Read more less

1. Face shield silicone protective cover, wear-resistant and dirt-resistant, to protect the face contact surface of the flight glasses from sweat / oil / cosmetic erosion.2. Soft silicone, surface oil spraying treatment, smooth and comfortable to touch, can be kneaded at will, not easy to deformation3. Easy to replace, easy to clean, convenient and hygienic.4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine to wear comfortable.5. Non-slip texture design, not easy to slide off6. Material: silicone7. Applicable models: Suitable for DJI Avata Goggles 28. Net weight: 25.5g9. Product size: 18 x 9.5 x 4cmPacking list:1 piece protective cover

Read more less

1. Applicable models: suitable for DJI Avata drone2. Light weight, does not affect the flight of the aircraft. Does not affect the storage of the machine.3. Buckle is not easy to loosen, can prevent the battery from falling off in flight.4. Fitted with drone body design, the body will not be damaged during installation and removal.5. Main material: ABS material

Read more less

1. Using optical glass, precision grinding processing, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and anti-scratch, effective protection3. UV protection mirror: used for seaside, mountain, snow and open space and other environmental shooting, can reduce the blue tone caused by UV, but also to exclude the interference of UV on the CCD4. ND scrimshaw mirror: to prevent overexposure in strong light environment, to resist scattered light5. Main material: aluminum alloy + optical glass6. Product size: diameter 23 x 3.9mm

Read more less

1. Using optical glass, precision grinding processing, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and anti-scratch, effective protection3. UV protection mirror: used for seaside, mountain, snow and open space and other environmental shooting, can reduce the blue tone caused by UV, but also to exclude the interference of UV on the CCD4. ND scrimshaw mirror: to prevent overexposure in strong light environment, to resist scattered light5. Main material: aluminum alloy + optical glass6. Product size: diameter 23 x 3.9mm

Read more less

1. Translucent design, easy to observe the protection status of the head.2. Fitting body design, solid, will not loosen.3. Provide multi-directional protection for the lens, to prevent foreign body collision, anti-dust;4. Fixed head, in transit at all times to protect the lens from scratches and extend the service life of the machine.5. Main material: PC6. Color: transparent black7. Compatible model: for DJI AvataPacking list:Lens protection cover x 1

Read more less

1. Multi-dimming mirror combination, free creation; High quality optical materials, true color restoration2. Made of high quality light material, real scenery color and relatively light and shade;By choosing suitable filter, you can get more control of aperture or shutter since3. Specification: ND8 + ND16 + ND324. Adaptation products: for DJI Avata5. Size: 22x18mm6. Single weight: about 0.5 g

Read more less

1. With certain waterproof performance, for DJI flight glasses and aircraft to provide more comprehensive protection.2. The soft material of the inner liner can be used to fix the inner articles during transportation, and avoid collision and extrusion.3. Knapsack uses multi-function independent space design, can receive numerous items at the same time.4. Large capacity, multi-functional independent space design, can carry many equipment at the same time5. Suitable for: for DJI Avata / DJI Air 2S / DJI FPV6. Size: 29.5 x 15 x 48cm

Read more less

1. The fixed battery buckle can effectively prevent AVATA from crashing due to violent flight battery falling off and power failure when flying in the air2. The buckle is only 4g, ultra-light weight, and hardly affects the flight time3. The installation is stable and fits the fuselage4. Does not cover the switch and battery status, easy and quick to disassemble and assemble5. Product size: 7 x 3 x 2 cm6. Product weight: 4 grams7. Note: Only the reinforcement buckle will be sent for delivery, nothing else!

Read more less

1. Detachable design, two ways of use2. It can be used as a battery buckle without installing the tail fin, and the tail fin needs to be glued to the battery buckle3. Material: PLA4. Product size: 7 x 4 x 2 cm5. Product net weight: 9 grams6. Note: Only buckles will be issued for delivery, nothing else!

Read more less

1. Effectively prevent dust from entering, dust-proof, moisture-proof and short-circuit proof2. Easy to install and not easy to fall off3. Made of TPU plastic material, soft and non-sticky, not easy to deform4. Closely fit with the interface, not easy to fall off, small and portable5. Material: Silicone6. Features: waterproof and dustproof, tight fit, lightweight and portable7. Specifications: battery dust plug x3 + body dust plug x18. Product size: 17 x 9 x 5mm9. Product weight: 1.5g/set10. Note: Only dust-proof plugs will be shipped, nothing else!

Read more less

1. Adopting dynamic design, the empennage can help the fuselage cut airflow and reduce air resistance2. Two-in-one design of tail fin + battery buckle, which can be combined and detached3. Tail+battery anti-disengagement buckle is only 7.7 grams, no sense of weight, does not affect flight4. Do not cover the battery switch and power status5. Material: PLA6. Features: Airflow cutting, battery anti-falling, quick disassembly7. Product size: 7 x 7 x 2.8 cm8. Product weight: 7.7 grams9. Note: Only the rear wing buckle will be shipped, no others!

Read more less

1. The attitude of the aircraft will follow your hand movements and move with it, bringing the immersive sense of "man-machine" control2. Operating frequency: 2.400-2.4835 GHz; 5.725-5.850 GHz3. ambient temperature: -10 to 40 degrees Celsius4. Battery life: about 5 hours5. Charging voltage: 5 volts 1 amp, 5 volts 2 amp6. Compatible products: for DJI Avata / DJI FPV / DJI Goggles 2 / DJI FPV Goggles V27. Emission power (EIRP).-2.4 GHz: less than or equal to 28.5 dBm (FCC), less than or equal to 20 dBm (CE/SRRC/MIC)-5.8 GHz: less than or equal to 31.5 dBm (FCC), less than or equal to 19 dBm (SRRC), less than or equal to 14 dBm (CE)8. Effective signal distance (no interference, no obstruction): 10 km (FCC), 6 km (CE/SRRC/MIC)9. Weight: approx. 167 gramsPacking list: -DJI through the joystick × 1-Hand strap × 1

Read more less

1. Specially designed for DJI Avata 2. It can effectively protect the propeller cover without affecting the flight performance 3. TPU material, with shock absorption and impact resistance 4. Simple and convenient installation, easy storage 5. Size: 9.2 x 3.25 x 1.8cm 6. Weight: 10g

Read more less

About The Product1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Package List1. Tempered Glass Film x 2 2. Adhesive x 2 3. Lens Cloth x 2 4. Wet & Dry Wipes x 2

Read more less

1. Effectively avoid damage to the fuselage due to impact by foreign objects during flight, improving flight safety2. Adopt tough material, crash-resistant, reduce accidental damage to the machine3. Real machine mold opening, suitable for Avata tailor-made, durable and wear-resistant4. Lightweight design, the whole set weighs only 22.3g, which does not affect flight use5. Equipped with paste reinforcement mud, which is stable and does not leave glue, easy to install and disassemble6. Using tough materials, good impact resistance and compression resistance, reducing accidental damage to the machine7. Main material: PP8. Size: 9.2x3.5x1.6cm9. Net weight: 22.3g10. Gross weight: 24.5gpacking list:-1 x Reinforced mud-4 x Bumper rings

Read more less

1. Effectively avoid damage to the fuselage due to impact by foreign objects during flight, improving flight safety2. Adopt tough material, crash-resistant, reduce accidental damage to the machine3. Real machine mold opening, suitable for Avata tailor-made, durable and wear-resistant4. Lightweight design, the whole set weighs only 22.3g, which does not affect flight use5. Equipped with paste reinforcement mud, which is stable and does not leave glue, easy to install and disassemble6. Using tough materials, good impact resistance and compression resistance, reducing accidental damage to the machine7. Main material: PP8. Size: 9.2x3.5x1.6cm9. Net weight: 22.3g10. Gross weight: 24.5gpacking list:-1 x Reinforced mud-4 x Bumper rings

Read more less

1. Effectively avoid damage to the fuselage due to impact by foreign objects during flight, improving flight safety2. Adopt tough material, crash-resistant, reduce accidental damage to the machine3. Real machine mold opening, suitable for Avata tailor-made, durable and wear-resistant4. Lightweight design, the whole set weighs only 22.3g, which does not affect flight use5. Equipped with paste reinforcement mud, which is stable and does not leave glue, easy to install and disassemble6. Using tough materials, good impact resistance and compression resistance, reducing accidental damage to the machine7. Main material: PP8. Size: 9.2x3.5x1.6cm9. Net weight: 22.3g10. Gross weight: 24.5gpacking list:-1 x Reinforced mud-4 x Bumper rings

Read more less

1. Stable power output of 65W, and two output ports USB-C and USB-A, can charge the battery and remote control at the same time2. Support PPS and PD protocols, also can charge cell phones, computers and other devices3. Universal interface, easy to use4. Packing list: charger x 1, dual USB-C cable x 15. Charging ambient temperature: 5-40 degrees Celsius6. Input voltage: 12.7-16V 6.5A7. DC output: USB-C: 5V 5A/9V 5A/12V 5A/15V 4.3A/20V 3.25A/5-20V 3.25A; USB-A: 5V 2A8. Compatible products: DJI Avata, DJI Mavic 3, DJI Mavic 3 Cine, DJI Goggles 2 battery

Read more less

1. Built-in intelligent battery management system, real-time monitoring and feedback of battery status, full of energy, intelligent guardian2. Charging manager can charge 4 batteries in sequence at the same time3. Battery capacity: 2420 mAh4. Nominal voltage: 14.76V5. Charging limit voltage: 17V6. Battery type: Li-ion7. Energy: 35.71 watt-hours8. Discharge multiplier: 7C typical9. Charging manager recommended charger: DJI 65W portable charger or other chargers supporting USB PD fast charging protocol10. Charge manager input: 5-20V, up to 5A11. Charge manager output: 17V12. Ambient temperature: 5-40 degrees Celsius13. Adapted products: for DJI Avata14. Packing list: battery x 2, charging manager x 1

Read more less

1. It can charge 4 batteries in turn at the same time, eliminating the trouble of replacing batteries one by one2. Charging time: about 47 minutes (measured when a single battery is suitable for charging with for DJI 65W portable charger, and it may vary slightly depending on the ambient temperature)3. Operating ambient temperature: 5 to 40 degrees celsius4. Output voltage: 17V5. Input voltage: 5-20V6. Rated current: 5A7. Compatible products: suitable for DJI Avata8. Note: the product does not contain batteries

Read more less

1. Lycra fabric, full protection, pressure resistance, unique craftsmanship, waterproof surface2. Double zippers, quick release hooks, adjustable shoulder straps, waterproof and crush-resistant shell3. Note: The product only includes a storage bag, and does not include drones and others4. Applicable models: suitable for DJI Avata5. Material: PU6. Dimensions: 375 x 305 x 95mm7. Weight: 0.9kg

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Silicone strap x 1

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Silicone strap x 1

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

1. Large-capacity partition storage, can hold the fuselage, glasses V2 or glasses 2, motion controller, battery, propellers, etc.2. Webbing handle, easy to carry3. Hardware two-way slider, easy to use and smooth4. The real machine molded EVA liner is very good for protecting equipment5. Applicable models: suitable for DJI AVATA6. Material: shell nylon + EVA, liner EVA7. Dimensions: about 40 x 30 x 11.5cm8. Weight: about 1080g

Read more less

1. Hard-shell backpack, shock-resistant and pressure-resistant, effectively protects your equipment2. Large-capacity partition storage, which can be transferred to the lower fuselage, 4 pieces of aircraft batteries, joysticks, goggles 2 (not compatible with goggles V2), adapter data cable blades, 7.9-inch tablet, etc.3. Plastic telescopic handle, good hand feeling4. Hardware two-way slider, smooth and beautiful5. Encrypted mesh on the back, breathable and comfortable to carry6. Model: suitable for DJI AVATA advanced version7. Material: shell cover ABS+PC, liner EVA8. Dimensions: about 35 x 26 x 9.8cm9. Weight: about 1115g10. Note: The product is only a storage bag, nothing else

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body, 2. Reinforced gluten noodle design can be kneaded at will without deformation, 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable, 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use, 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Neck Strap x 1

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and drone remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience Note: Do not include the Remote controller and drone

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and drone remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience Note: Do not include the Remote controller and drone

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body, 2. Reinforced gluten noodle design can be kneaded at will without deformation, 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable, 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use, 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Neck Strap x 1

Read more less

Features1. Suitable for old and new glasses/handles. Compatible with Goggles 2 and RC Motion 2/1. 2. Professional waterproof, safety box tightly closed and sealed, splashing or sprinkling water can effectively avoid water leakage. 3. High strength, drop resistance, compression resistance, corrosion resistance, high and low temperature resistance. The use of super impact resistant hard material, anti-fall resistance, not easy to deform, strong load-bearing capacity. 4. High-quality shockproof inner support, precise mold opening, tight storage to protect your equipment. 5. Comfortable soft rubber handle, comfortable to feel, non-slip and wear-resistant, relieve hand pressure.Specifications1. Material: Plastic + EVA 2. Model: AQX-6-U 3. Size: 35.4 x 29.4 x 13.7cm 4. Net weight: 1.47kg

Read more less

1. Specially designed for DJI Avata's new advanced kit and exploration kit, precise mold opening, small size and large capacity;2. PU leather fabric is waterproof, with exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. High-quality handle, easy to carry;5. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant;6. By adjusting the shoulder strap, the extra shoulder strap can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance.7. Size: 32 x 26.5 x 12.3cm8. Weight: 864.5g

Read more less