DJI Mavic Series

1. The Wide-Angle Lens uses a precise optical design that increases the FOV to 108° with a 15.5mm format equivalent, offering wider camera angles.2. Weight (single): 15.5 g3. FOV: 108°4. Format Equivalent: 15.5 mm5. Compatibility:-for DJI Mavic 3 Pro-for DJI Mavic 3 Pro Cine

Read more less

1. The exquisite pattern is full of personality, and the color is bright and not easy to fade.2. Outdoor ink, durable and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated pasting.4. There is an air guide groove on the back, which is convenient for handling air bubbles and makes it easier to fit.5. Precise cutting, precise fit, no shrinkage and no edge warping.Precautions for use:1. Clean the fuselage first with the free film accessories package, so that there is no moisture or dust on the surface, then compare the stickers with the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position, if it is not pasted once Can be torn off and pasted repeatedly.2. If there is a warped part on the edge, please press it with your hands and heat it with a hot hair dryer until it fits the fuselage completely.

Read more less

1. Material: Fabric +fleece lining2. It can fully protect the equipment from normal scratches, dirt, tearing and abrasion3. It can be carried by hand or cross-body, easy to carry4. Visible large-capacity zipper mesh bag, which can store accessories such as adapter cables, propellers, rockers, etc.5. The middle loose-leaf layer is soft suede material to prevent scratching of the machine and accessoriesKit bag1. Model: B5742. Product size: 34.5*30*12.8cm3. Net weight: 1.09kgBody bag1. Model: B5732. Product size: 26.4*14.8*11.5cm3. Net weight: 388g

Read more less

1. Material: Fabric +fleece lining2. It can fully protect the equipment from normal scratches, dirt, tearing and abrasion3. It can be carried by hand or cross-body, easy to carry4. Visible large-capacity zipper mesh bag, which can store accessories such as adapter cables, propellers, rockers, etc.5. The middle loose-leaf layer is soft suede material to prevent scratching of the machine and accessoriesKit bag1. Model: B5742. Product size: 34.5*30*12.8cm3. Net weight: 1.09kgBody bag1. Model: B5732. Product size: 26.4*14.8*11.5cm3. Net weight: 388g

Read more less

1. High-definition quality, high light transmittance, lossless image quality.2. 9H high-hardness tempered glass, high-strength explosion-proof and impact-resistant safer.3. Easy to install and no bubbles, one stick and fit.4. Color box packaging, exquisite transparent storage box and film accessories package.5. Specifications: 2 sets6. Applicable models: For DJI Mavic 3 Pro7. Material: Tempered glass

Read more less

1. The exquisite pattern is full of personality, and the color is bright and not easy to fade.2. Outdoor ink, durable and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated pasting.4. There is an air guide groove on the back, which is convenient for handling air bubbles and makes it easier to fit.5. Precise cutting, precise fit, no shrinkage and no edge warping.Precautions for use:1. Clean the fuselage first with the free film accessories package, so that there is no moisture or dust on the surface, then compare the stickers with the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position, if it is not pasted once Can be torn off and pasted repeatedly.2. If there is a warped part on the edge, please press it with your hands and heat it with a hot hair dryer until it fits the fuselage completely.

Read more less

1. The exquisite pattern is full of personality, and the color is bright and not easy to fade.2. Outdoor ink, durable and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated pasting.4. There is an air guide groove on the back, which is convenient for handling air bubbles and makes it easier to fit.5. Precise cutting, precise fit, no shrinkage and no edge warping.Precautions for use:1. Clean the fuselage first with the free film accessories package, so that there is no moisture or dust on the surface, then compare the stickers with the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position, if it is not pasted once Can be torn off and pasted repeatedly.2. If there is a warped part on the edge, please press it with your hands and heat it with a hot hair dryer until it fits the fuselage completely.

Read more less

1. The exquisite pattern is full of personality, and the color is bright and not easy to fade.2. Outdoor ink, durable and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated pasting.4. There is an air guide groove on the back, which is convenient for handling air bubbles and makes it easier to fit.5. Precise cutting, precise fit, no shrinkage and no edge warping.Precautions for use:1. Clean the fuselage first with the free film accessories package, so that there is no moisture or dust on the surface, then compare the stickers with the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position, if it is not pasted once Can be torn off and pasted repeatedly.2. If there is a warped part on the edge, please press it with your hands and heat it with a hot hair dryer until it fits the fuselage completely.

Read more less

1. The unique two-in-one design is not only a protective cover, but also a light shield. Two-stage shading, free viewing angle2. Effectively protect the screen, buttons, joystick. Applicable to RC Plus shape structure, effectively prevents the screen from being squeezed and scratched, and prevents keys from being touched by mistake3. One button to close, avoiding repeated disassembly and assembly of the joystick4. No need to remove the protective cover, it can be safely and conveniently stored in a backpack5. Applicable models: suitable for RC Plus6. Material: plastic7. Net weight: 125g8. Gross weight: 217g

Read more less

1. DJI Mini 3 Pro Fly More Kit includes two Intelligent Flight Batteries, a Two-Way Charging Hub, data cable, shoulder bag, spare propellers, and screws, providing comprehensive support for your aerial photography experience, at a better price than buying separately.2. One Intelligent Flight Battery provides a 34-min max flight time(Measured at a constant speed of 21.6 kph in windless conditions.), giving you more peace of mind when you’re in the air.3. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source.4. With the DJI 30W USB-C Charger (sold separately), three DJI Mini 3 Pro Intelligent Flight Batteries can be fully charged in just three hours, greatly improving the charging efficiency.5. Propellers specially made for DJI Mini 3 Pro produce less noise and have undergone precise dynamic balancing tests to provide higher aerodynamic efficiency and powerful thrust to the aircraft.6. Specially made for DJI Mini 3 Pro, the shoulder bag provides enough space for one drone and accessories like one remote controller, three batteries, one charging hub, propellers, ND filter set, data cable, and a SD card.7. Compatibility:DJI Mini 3 ProIn The Box:Intelligent Flight Battery × 2Two-way Charging Hub × 1Propellers (pair) × 2Screws × 12Shoulder Bag × 1USB 3.0 Type-C Data Cable × 1

Read more less

1. Be prepared and fly freely with peace of mind with 34 mins of max flight time with DJI Mini 3 Pro; 38 mins of max flight time with DJI Mini 3.2. Tips:Measured at a constant speed of 21.6 kph in windless conditions.Specifications:1. Capacity: 2453 mAh2. Weight: Approx. 80.5 g3. Voltage: 7.38 V4. Charging Voltage Limit: 8.5 V5. Battery Type: Li-ion6. Energy: 18.1 Wh7. Max Charging Power: 37 W8. Charging Time: 64 mins (with DJI 30W USB-C Charger and the battery mounted to the aircraft)9. Charging Temperature: 5-40° C (41° to 104° F)10. Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargers.11. Compatibility:-DJI Mini 3 Pro-DJI Mini 3

Read more less

1. DJI Mini 3 Pro Fly More Kit Plus includes two Intelligent Flight Batteries Plus, a Two-Way Charging Hub, data cable, shoulder bag, spare propellers, and screws, providing comprehensive support for your aerial photography experience, at a better price than buying separately.2. With a 47-min max flight time(Measured at a constant speed of 21.6 kph in windless conditions. ), the DJI Mini 3 Pro Intelligent Flight Battery Plus gives you more out of every flight.3. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source.4. With the DJI 30W USB-C Charger (sold separately), three DJI Mini 3 Pro Intelligent Flight Batteries Plus can be fully charged in just four hours, greatly improving the charging efficiency.5. Propellers specially made for DJI Mini 3 Pro produce less noise and have undergone precise dynamic balancing tests to provide higher aerodynamic efficiency and powerful thrust to the aircraft.6. Specially made for DJI Mini 3 Pro, the shoulder bag provides enough space for one drone and accessories like one remote controller, three batteries, one charging hub, propellers, ND filter set, data cable, and a SD card.7. Compatibility:DJI Mini 3 ProTips:With the Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g. Please check and strictly abide by local laws and regulations before flying.In The Box:Intelligent Flight Battery Plus × 2Two-Way Charging Hub × 1Propellers (pair) × 2Screws × 12Shoulder Bag × 1USB 3.0 Type-C Data Cable × 1

Read more less

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning2. Manti 3/Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage)3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched7. The umbrella cabin of Manti 3/Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used.8. When installing, please be careful not to cover the battery switch and the sensor belowParameter:1. Speed reduction: 5m/s-5.5m/s (the difference depends on the size of the drone)2. Normal working hours: 4 hours3. Working temperature: -10-60 degrees Celsius4. Response time: 100 milliseconds5. Response distance: 8 meters6. Working altitude: less than or equal to 4000 meters7. Charging voltage: 5V 1A8. Equivalent drop distance: 1.6 meters and below9. Consumable parts: umbrella cabin10. Buzzer: Yes11. Firmware upgrade: support (DFU)12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened)13. Main material: PC14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus)15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus)Applicable models:-Manti 3: Mavic 3/AIR/AIR 2/AIR 2S/Mavic pro/Mavic 2-Manti 3 Plus: Mavic 3 /Mavic 2/Mavic pro

Read more less

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning2. Manti 3/Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage)3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched7. The umbrella cabin of Manti 3/Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used.8. When installing, please be careful not to cover the battery switch and the sensor belowParameter:1. Speed reduction: 5m/s-5.5m/s (the difference depends on the size of the drone)2. Normal working hours: 4 hours3. Working temperature: -10-60 degrees Celsius4. Response time: 100 milliseconds5. Response distance: 8 meters6. Working altitude: less than or equal to 4000 meters7. Charging voltage: 5V 1A8. Equivalent drop distance: 1.6 meters and below9. Consumable parts: umbrella cabin10. Buzzer: Yes11. Firmware upgrade: support (DFU)12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened)13. Main material: PC14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus)15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus)Applicable models:-Manti 3: Mavic 3/AIR/AIR 2/AIR 2S/Mavic pro/Mavic 2-Manti 3 Plus: Mavic 3 /Mavic 2/Mavic pro

Read more less

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning2. Manti 3/Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage)3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched7. The umbrella cabin of Manti 3/Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used.8. When installing, please be careful not to cover the battery switch and the sensor belowParameter:1. Speed reduction: 5m/s-5.5m/s (the difference depends on the size of the drone)2. Normal working hours: 4 hours3. Working temperature: -10-60 degrees Celsius4. Response time: 100 milliseconds5. Response distance: 8 meters6. Working altitude: less than or equal to 4000 meters7. Charging voltage: 5V 1A8. Equivalent drop distance: 1.6 meters and below9. Consumable parts: umbrella cabin10. Buzzer: Yes11. Firmware upgrade: support (DFU)12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened)13. Main material: PC14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus)15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus)Applicable models:-Manti 3: Mavic 3/AIR/AIR 2/AIR 2S/Mavic pro/Mavic 2-Manti 3 Plus: Mavic 3 /Mavic 2/Mavic pro

Read more less

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning2. Manti 3/Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage)3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched7. The umbrella cabin of Manti 3/Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used.8. When installing, please be careful not to cover the battery switch and the sensor belowParameter:1. Speed reduction: 5m/s-5.5m/s (the difference depends on the size of the drone)2. Normal working hours: 4 hours3. Working temperature: -10-60 degrees Celsius4. Response time: 100 milliseconds5. Response distance: 8 meters6. Working altitude: less than or equal to 4000 meters7. Charging voltage: 5V 1A8. Equivalent drop distance: 1.6 meters and below9. Consumable parts: umbrella cabin10. Buzzer: Yes11. Firmware upgrade: support (DFU)12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened)13. Main material: PC14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus)15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus)Applicable models:-Manti 3: Mavic 3/AIR/AIR 2/AIR 2S/Mavic pro/Mavic 2-Manti 3 Plus: Mavic 3 /Mavic 2/Mavic pro

Read more less

1. High-definition quality, high light transmittance, lossless image quality. 2. 9H high-hardness tempered glass, high-strength explosion-proof and impact-resistant safer. 3. Real machine mold opening, accurate size, full screen fit 4. Frosted purple light eye protection, sensitive touch, smoother hand feeling 5. Easy to install and no bubbles, one stick and fit.

Read more less

1. High-definition quality, high light transmittance, lossless image quality. 2. 9H high-hardness tempered glass, high-strength explosion-proof and impact-resistant safer. 3. Real machine mold opening, accurate size, full screen fit 4. Frosted purple light eye protection, sensitive touch, smoother hand feeling 5. Easy to install and no bubbles, one stick and fit.

Read more less

1. Practical and large capacity; can accommodate drones, RC-N1, 4 batteries (including one body), portable charger, charging housekeeper, propellers, adapter cables, joysticks, filter boxes and other accessories2. Professional waterproof, the safety box is tightly closed and sealed, which can effectively prevent water seepage and leakage when splashing or sprinkling water3. High-strength, drop-resistant, compressive, corrosion-resistant, high and low temperature resistant4. Super impact-resistant hard material is used, which is resistant to falling and smashing, not easy to deform, and has a strong load-bearing capacity5. Shockproof inner support, precise mold opening, tight storage and protection of your equipment6. Comfortable soft rubber handle, comfortable hand feeling, non-slip and wear-resistant, relieve hand pressure7. High-density elastic egg cotton, soft and fit shock-absorbing protection, effectively protect the machine and accessories8. 304 stainless steel chain, corrosion-resistant and wear-resistant, durable9. Box reinforcement ribs increase the strength of the box, compressive and wear-resistant, and can be placed stably10. High-strength press lock, tightly seal the box, thicker, thicker, wear-resistant and durable11. Applicable models: suitable for Mavic 3 Pro / Mavic 3 Classic / Mavic 312. Note: The product only includes a safety box, nothing else13. Dimensions: 36.5 x 42 x 15.3cm14. Net weight: 2.36kg15. Gross weight: 2.55kg

Read more less

Attachments:1. The standard action camera adapter can be mounted for Action 3 / Action 2 / GoPro 8 / 9 / 10 / MAX / Insta360 One R and other action cameras2. One-piece molding, locking the fuselage, and stable installation; it will not block the vision system and sensor system at the bottom of the drone3. Can be used with Sunnylife searchlight4. Comes with a 1/4 adapter, which can be directly installed with searchlights and other devices with 1/4 screw holes at the bottom5. There is a soft pad inside to prevent the fuselage from being scratched6. Material: plastic7. Applicable models: suitable for Mavic 3 Pro / Mavic 3 Classic / Mavic 38. Net weight: 30g (including long screws)9. Gross weight: 68gSearchlight:1. 3 kinds of brightness controllable to meet the needs of different scenes2. Use time: about 48-180 minutes3. Battery capacity: 800mah4. Power supply mode: USB charging / built-in lithium battery5. Charging time: about 1.5 hours8. Charging current: 650mA9. Size: 38x46x39mm

Read more less

1. Suitable for DJI MINI 2/MAVIC MINI drones, can be delivered remotely, used for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc.;2. Mini easy-to-throw, allowing you to show and create more possibilities;3. USB charging, quick release, one-button remote control;4. The installed weight is about 54g, which is light and safe; the fuselage design will neither increase the burden on the drone nor damage the drone, so you can enjoy airdropping gifts;5. The landing gear at the bottom is effectively increased by 3cm, and it can still take off and land on uneven ground, effectively protecting the safety of the fuselage.Parameter:1. Maximum load: 100 grams2. Built-in battery capacity: 150mAh3. Standby time: about 12 hours4. Charging time: 1.5 hours5. Remote control distance: 100 meters6. Charging interface: Type-C7. Main material: plastic8. Attribute: Gray9. Net weight: 79g10. Product size: 8.6 x 6.2 x 3.5cm (thrower), 3.8 x 5.8 x 1.5cm (remote control)Packing list:Dropper x 1Remote control x 1Increased landing gear (set) x 1

Read more less

1. Lightweight design, without increasing the motor load2. Buckle structure, easy and quick installation and disassembly3. Effective protection separates the spiral from the outside, protecting the blades from being scratched, broken, etc.4. Isolate the propeller, protect the propeller and effectively prevent the propeller from scratching people or objects5. High toughness material, fine workmanship, comfortable hand feeling, wear-resistant and durable6. Applicable models: suitable for DJI Mini 3 / 3Pro7. Material: plastic8. Dimensions: about 17.3 x 17.3 x 5.5cm9. Net weight: about 44.5g10. This product only includes the protective ring, and does not include other items of the drone

Read more less

1. Lightweight design, without increasing the motor load2. Buckle structure, easy and quick installation and disassembly3. Effective protection separates the spiral from the outside, protecting the blades from being scratched, broken, etc.4. Isolate the propeller, protect the propeller and effectively prevent the propeller from scratching people or objects5. High toughness material, fine workmanship, comfortable hand feeling, wear-resistant and durable6. Applicable models: suitable for DJI Mini 3 / 3Pro7. Material: plastic8. Dimensions: about 17.3 x 17.3 x 5.5cm9. Net weight: about 44.5g10. This product only includes the protective ring, and does not include other items of the drone

Read more less

1. Spider shape, cool and dazzling2. Effective 42mm height increase, increase the spacing between the fuselage and the ground, effectively prevent ground debris damage or dirty fuselage, sensors, etc. during takeoff and landing3. Accurate mold, firmly lock the fuselage firmly installed, does not affect the bottom of the fuselage fill light and sensors4. Widened hollow chassis, external eight structure kickstand, stable and safe5. Foldable tripod, precision ratchet structure6. Convenient storage, easy to travel7. One-piece design, easy installation, quick disassembly8. Applicable models: for DJI Mavic 3 Pro9. Material: plastic10. Weight: about 49g

Read more less

1. Ground nail fixed, in the beach, grass, forest and other wild environments, with stronger wind resistance resistance2. Silicone fixing ring around, strong and durable not deformed3. Effective protection of the drone, so that the drone safe landing, to prevent damage to the drone lens and body4. Fast folding, after folding the size of an ordinary laptop, easy to carry5. Double-sided leather material, waterproof and wear-resistant, can be rinsed and wiped, outdoor can also be easily cleaned6. Tightly sewn edges, exquisite workmanship, tight and strong7. Applicable models: for DJI Inspire series / Matrice 30 series / Mavic series, Autel EVO II, Elf Phantom series and other large drones (within 40cm wheelbase)8. Material: leather + silicone9. Weight: about 1300g10. Size: unfolded about 110 x 100cm

Read more less

1. Ground nail fixed, in the beach, grass, forest and other wild environments, with stronger wind resistance resistance2. Silicone fixing ring around, strong and durable not deformed3. Effective protection of the drone, so that the drone safe landing, to prevent damage to the drone lens and body4. Fast folding, after folding the size of an ordinary laptop, easy to carry5. Double-sided leather material, waterproof and wear-resistant, can be rinsed and wiped, outdoor can also be easily cleaned6. Tightly sewn edges, exquisite workmanship, tight and strong7. Applicable models: for DJI Mavic / Mavic Air series, Phantom series, Autel EVO series, Mini series and other small and medium-sized drones8. Material: leather + silicone9. Weight: about 700g10. Size: unfolded about 80 x 72cm, folded about 26.5 x 24cm

Read more less

1. Spider shape, cool and dazzling2. Effective 42mm height increase, increase the spacing between the fuselage and the ground, effectively prevent ground debris damage or dirty fuselage, sensors, etc. during takeoff and landing3. Accurate mold, firmly lock the fuselage firmly installed, does not affect the bottom of the fuselage fill light and sensors4. Widened hollow chassis, external eight structure kickstand, stable and safe5. Foldable tripod, precision ratchet structure6. Convenient storage, easy to travel7. One-piece design, easy installation, quick disassembly8. Applicable models: for DJI Mavic 3 Pro9. Material: plastic10. Weight: about 49g

Read more less

1. Specifically designed for DJI AIR 3 drone gimbal camera, precise mold opening, very fit and stable, and solid design to prevent accidental loosening 2. This AIR 3 camera lens cover is made of PC material, which is strong in toughness, does not damage the body, is durable and wear-resistant, beautiful and practical 3. The gimbal, camera, and sensor are all protected against dust, scratches, and collisions with foreign objects. It does not affect the storage of the drone and can be stored in the original bag, as well as in most handbags, waterproof cases, and backpacks on the market. Always protect the gimbal camera during storage and transportation to extend its service life and always keep it in new condition. 4. Snap-on design, installation and disassembly can be completed in one step. When disassembly, lift it up to disassemble, saving time and effort, and will not jam the lens. 5. Size: 76x87x91mm 6. Weight: 32g

Read more less

1. Specially designed for DJI Mini 4 Pro drone gimbal camera, precise mold opening, very fit and stable, solid design to prevent accidental loosening 2. This Mini 4 Pro drone camera lens cover is made of ABS material, which is durable and wear-resistant, beautiful and practical, does not damage the fuselage, and is integrated with the fuselage. 3. The gimbal, camera, and sensor are all protected against dust, scratches, and collisions with foreign objects. It does not affect the storage of the drone and can be stored in the original bag, as well as in most handbags, waterproof cases, and backpacks on the market. Always protect the gimbal camera during storage and transportation to extend its service life and always keep it in new condition. 4. Snap-on design, installation and disassembly can be done in one step, saving time and effort, and the lens will not get stuck 5. Size: 74x67x62mm 6. Weight: 18g

Read more less

1. CNC machined aluminum alloy, high strength and hardness, stable clamping is not easy to break.2. Expand the tripod for instant self-timer, time-lapse shooting and stable shooting.3. Multi-angle adjustable, you can adjust the remote control to a comfortable viewing angle.4. Tightly mounted, integrated with the camera body, safe to use5. Screw locking, stable installation, not easy to come loose6. Material: aluminum alloy, plastic7. Weight: about 78g

Read more less

1. Effectively avoid crashes caused by high-speed rotating blades injuring people or damage to the blades during flight. 2. Effectively protect the blades from being scratched or broken. 3. The light weight does not affect the normal flight of the drone. 4. ABS PC material, fine workmanship, has a certain elasticity, easy to disassemble. 5. Dimensions: 55 x 20 x 6.1cm

Read more less

1. Designed with reinforced tension glue, which can be kneaded at will without collapsing or deforming.2. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover to prevent foreign objects from colliding and scratching the remote control3. Anti-slip texture design. When flying outdoors, it effectively prevents hands from sweating and slipping, making it safer and more comfortable to hold.4. Reserve the hole for the antenna without affecting the signal.5. Flexible and elastic, easy to disassemble and install.6. Size: 18.67 x 13.36 x 4.92cm

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Compact shape, lower noise2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;3. Provide strong pulling force for Mavic Mini.Parameter:1. Main material: PC2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)3. Product size: 11.938 × 6.604cm (diameter × pitch)4. Packing method: 2 pairs in boxes, 4 pairs in bagsPacking list:Propeller (set) x 1Screw (set) x 1Screwdriver x 1

Read more less

1. Ultra-long distance, large-scale transmission, real-time voice2. Super loud volume: the volume can be adjusted freely according to the usage scene.3. Easy installation: just lightly buckle around the object, easy to fix, convenient and quick4. Featured function: Built-in dual-band communication, easy to switch in case of interference.5. Material: ABS+electronic components6. Transmission range: up to 2000 meters (under no occlusion/no interference environment)7. Volume (MAX): 100 decibels (sound propagation distance 200 meters)8. Charging time: 30 minutes9. Use time: 120 minutes (full charge state)10. Host weight: 95 grams11. Product size:- Megaphone: 10 x 3.5 x 12.5cm- Remote control: 5 x 2 x 15cm

Read more less

1. Compatible with most mainstream GPS drones: suitable for X193 PRO/max, SG906 PRO/max, X7 PRO/max, SG907max, E520S, S162, F11s, F7 PRO, Phantom 3 4 series, Mavic Air, Air S, Mini 2, Mini SE, Mavic Pro 2, M8, M9, M10, ZEN K1, B4W, B5W, B1 9 PRO, L109 Pro, L900 PRO, ZINO 2 PRO, FIMI X8, X1S, etc. can carry drones with a load of more than 100 grams, remote control cars and remote control boats, etc.2. Thrower size: 9.5 x 4.5 x 6.5 CM3. Thrower weight: 55g4. Remote control size: 15.5 x 5 x 2 CM5. Thrower battery specification: 3.7V-350MAH (built-in lithium battery)6. Remote control battery specification: 3.7V-350MAH (built-in lithium battery)7. Thrower charging time: about 30 minutes8. Remote control charging time: about 30 minutes9. Use time: about 2 hours10. Remote control distance: 1000 meters (the farthest)11. Remote control frequency: 2.4G

Read more less

1. Specially designed for DJI Air 3, it has a stylish appearance, small size but large capacity, and can also store the aircraft and a full set of accessories (both remote controls can be used);2. Using high-quality EVA + high-density sponge lining, precision processing, precise fit, with hardness and flexibility, can better protect your items;3. Highly tight and waterproof, can withstand repeated watering tests and is durable;4. Portable handle, strong load-bearing capacity, comfortable hand feel, relieves hand pressure, and can also be worn cross-body, and the length can be adjusted freely;5. PP material, hard shell design, wear-resistant and drop-resistant6. Size: 41.8 x 34.5 x 18.6cm7. Weight: 2062g

Read more less

1. Specially designed for DJI Air 3, it has a stylish appearance, small size but large capacity, and can also store the aircraft and a full set of accessories (both remote controls can be used);2. Using high-quality EVA + high-density sponge lining, precision processing, precise fit, with hardness and flexibility, can better protect your items;3. Highly tight and waterproof, can withstand repeated watering tests and is durable;4. Portable handle, strong load-bearing capacity, comfortable hand feel, relieves hand pressure, and can also be worn cross-body, and the length can be adjusted freely;5. PP material, hard shell design, wear-resistant and drop-resistant6. Size: 42 x 34 x 15cm7. Weight: 2062g

Read more less

1. Exquisite workmanship and durability. Not easy to damage, more confident to deal with a variety of different wear and tear.2. It can also help you cope when the landing place is wet.3. The fabric is soft and provides cushioning when the plane is landing, allowing the plane to land smoothly.4. Provide care for aircraft of different sizes and play with the peace of mind.5. Material: Cardboard+PU6. Size: 55 x 55cm

Read more less

1. Select high-quality fabrics, waterproof and sunscreen, not soaked, not easy to fade, suitable for various models2. Safety slogan design, easy to understand, flight safety, effectively reminding others not to disturb3. The foldable and shrinkable design makes consumers feel more comfortable and easy to carry4. Double-sided and two-color design, whether it is on the beach or grass, it can clearly highlight the position of the apron5. Special portable bag device, convenient for storage and portability6. The configuration of three fixed ground spikes and reflective strips can make the aircraft land on the apron normally in windy conditions or when flying at night7. Main material: oxford cloth8. Attributes: orange (front), blue (back)9. Product size: 55cm, 75cmPacking list:- Helipad x 1- storage bag x 1- Reflective strip x 8- Ground Spike x 3

Read more less

1. 200W fast charging, high power, safer, can charge multiple devices at the same time2. 100W two-way charge and discharge, can be used as a power bank after installing the battery3. Six protections: overcurrent protection/overvoltage protection/short circuit protection/overtemperature protection/undervoltage protection/overpower protection4. The three batteries are charged at the same time, and the first battery is fully charged in about 60-70 minutes, so that you can always use the battery without worrying about running out of power5. Press and hold the function button for more than 2 seconds to enter the one-button storage mode, and the three batteries will be charged to about 60%, which is convenient for travel, air transportation, and storage when not in use for a long time.6. While charging a single battery with 100W, the Type-C port supports PD output up to 100W output chargingParameter:1. Applicable battery model: suitable for DJI Mavic 3 series battery (BWX-260-5000-15.4)2. Material: PC fireproof material3. Working temperature: 0-40 degrees Celsius4. AC input voltage: 100V-240V~2.5A 50Hz/60Hz 230W5. USB Type-C input: 9V~3A; 12V~3A; 15V~3A; 20V~5A6. USB Type-C output: 5V-2A; 9V-3A; 12V-3A; 15V-3A; 20V-5A PPS: 3.3V-21V=5A7. Charging power: 100W Max (single battery)/200W Max (multiple batteries)8. Product size: 151 x 75 x 60mm9. Product weight: 475g +/-10% (excluding wire weight)10. Charging time:-The first battery is about 60-70 minutes-About 70-80 minutes with two batteries-Three batteries about 80-90 minutespacking list:Charger x 10.5m dual Type-C cable x 11m AC power cord x 1manual x 1storage bag x 1

Read more less

1. 200W fast charging, high power, safer, can charge multiple devices at the same time2. 100W two-way charge and discharge, can be used as a power bank after installing the battery3. Six protections: overcurrent protection/overvoltage protection/short circuit protection/overtemperature protection/undervoltage protection/overpower protection4. The three batteries are charged at the same time, and the first battery is fully charged in about 60-70 minutes, so that you can always use the battery without worrying about running out of power5. Press and hold the function button for more than 2 seconds to enter the one-button storage mode, and the three batteries will be charged to about 60%, which is convenient for travel, air transportation, and storage when not in use for a long time.6. While charging a single battery with 100W, the Type-C port supports PD output up to 100W output chargingParameter:1. Applicable battery model: suitable for DJI Mavic 3 series battery (BWX-260-5000-15.4)2. Material: PC fireproof material3. Working temperature: 0-40 degrees Celsius4. AC input voltage: 100V-240V~2.5A 50Hz/60Hz 230W5. USB Type-C input: 9V~3A; 12V~3A; 15V~3A; 20V~5A6. USB Type-C output: 5V-2A; 9V-3A; 12V-3A; 15V-3A; 20V-5A PPS: 3.3V-21V=5A7. Charging power: 100W Max (single battery)/200W Max (multiple batteries)8. Product size: 151 x 75 x 60mm9. Product weight: 475g +/-10% (excluding wire weight)10. Charging time:-The first battery is about 60-70 minutes-About 70-80 minutes with two batteries-Three batteries about 80-90 minutespacking list:Charger x 10.5m dual Type-C cable x 11m AC power cord x 1manual x 1storage bag x 1

Read more less

1. Select high-quality fabrics, waterproof and sunscreen, not soaked, not easy to fade, suitable for various models2. Safety slogan design, easy to understand, flight safety, effectively reminding others not to disturb3. The foldable and shrinkable design makes consumers feel more comfortable and easy to carry4. Double-sided and two-color design, whether it is on the beach or grass, it can clearly highlight the position of the apron5. Special portable bag device, convenient for storage and portability6. The configuration of three fixed ground spikes and reflective strips can make the aircraft land on the apron normally in windy conditions or when flying at night7. Main material: oxford cloth8. Attributes: orange (front), blue (back)9. Product size: 55cm, 75cmPacking list:- Helipad x 1- storage bag x 1- Reflective strip x 8- Ground Spike x 3

Read more less

1. The apron is double-sided and double-colored, which can be adapted to different occasions and effectively protect the drone body and lens 2. Safety warning slogan design, easy to understand and do not disturb, bright colors highlight the location of the apron 3. Double-sided leather, waterproof and anti-dirty, easy to clean 4. Equipped with fixed ground nails, it is stable and wind-resistant. It can effectively prevent the apron from moving or turning in complex outdoor environments such as beaches, grass, and forests 5. Foldable storage, fast and convenient, easy storage 6. Material: PU 7. Size: 50x50 cm, 65x65 cm 8. Note: When ground nails cannot be used, use heavy objects such as stones to fix the apron without affecting the take-off and landing of the drone, so as to prevent the apron from deviating from its position or turning over due to excessive airflow Packing list: - Helipad x 1 - Ground Spike x 4 - storage bag x 1

Read more less