Optical Series

522 products


  • RJ45 Micro USB to 100M Ethernet Adapter Steady Watch Video-garmade.com

    RJ45 Micro USB to 100M Ethernet Adapter Steady Watch Video

    1. Support 100M network2. Expand the wired network port to stabilize the Internet environment3. Easy to use4. Run at full speed, no compression, no cache, 4K resources are not stuck, no buffering5. Chromecast or other connected wired network for faster and more stable viewing6. Port type: RJ-457. Remarks: only the network cable connected from the router is supported8. Applicable network type: fast ethernet9. Transmission rate: 100Mbps10. Cable length: 100cm11. Interface: Micro usb 2.012. Chip: AX8877213. Size: 59 x 23 x 16mmSpecification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 14cm * 9cm * 3cm / 5.51inch * 3.54inch * 1.18inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs 40HQ: 412 cartons * 356 pcs = 146672 pcs

    €10,96

  • JUNSUNMAY Optical 3.5mm Female Mini Jack Plug to Digital Toslink Male Audio Adapter Connector-garmade.com

    JUNSUNMAY Optical 3.5mm Female Mini Jack Plug to Digital Toslink Male Audio Adapter Connector

    1. Converts toslink plug to optical mini plug or optical mini jack to toslink jack,toslink female to mini male 3.5mm adapter.2. Eradicate complications associated with electrical grounding noise to grant superior audio clarity by using the Toslink to mini optical adapter.3. Connector comes with a dust cap for protection from contamination while not in use.4. Connector 1: toslink jack;Connector 2: mini plug(Note:this is the conversion of the optical interface, not the headphone interface)5. Increase sound quality by significantly plummeting signal jitter and optical distortion with the toslink jack to mini plug optical adapter which features graded index optical fiber.Specification: General Certificate EMC Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 21cm * 15cm * 1cm / 8.27inch * 5.91inch * 0.39inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 90cm * 90cm * 19cm / 35.43inch * 35.43inch * 7.48inch Loading Container 20GP: 173 cartons * 500 pcs = 86500 pcs 40HQ: 402 cartons * 500 pcs = 201000 pcs

    €5,70

  • CO-TOS101 3m Optical Fiber Audio Cable Speaker Power Amplifier Digital Audiophile Square To Square Signal Cable(Bright Gold Plated)-garmade.com

    CO-TOS101 3m Optical Fiber Audio Cable Speaker Power Amplifier Digital Audiophile Square To Square Signal Cable(Bright Gold Plated)

    1. High-focus optical fiber lens technology makes the beam highly focused, greatly reduces the reflection of the beam on the inner wall, completely ensures the lossless transmission of optical signals, makes the sound quality clear and transparent, restores the authenticity of the sound quality, and maintains signal integrity2. The pop-up plug is very convenient for accurate alignment of optical signals and successful transmission of data volume3. Super heavy-duty plug, close to the fiber optic interface, but also very convenient to plug in and out4. Broadband transmission performance with high speed, high fidelity and low loss5. Long service life, very suitable for hidden line decoration6. The wire body is soft and flexible7. Connector: gold-plated connector8. Material composition: PVC cover9. Interface type: standard square pair port10. Scope of application: It is suitable for DVD, computer sound card optical fiber digital signal output to power amplifier, and one line transmits 5.1, 7.1 multi-channel audio signals; it is suitable for square and other optical fiber interfacesSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 25cm * 25cm * 7cm / 9.84inch * 9.84inch * 2.76inch Qty per Carton 114 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 114 pcs = 20178 pcs 40HQ: 412 cartons * 114 pcs = 46968 pcs

    €8,46

  • 4 In 1 Plug-in PLC Optical Splitter SC Port Carrier-grade Fiber Optic Splitter-garmade.com

    4 In 1 Plug-in PLC Optical Splitter SC Port Carrier-grade Fiber Optic Splitter

    1. Carrier-grade standard insert type 1-4 optical splitter, low insertion loss, uniform light splitting2. Low insertion loss, high return loss, good interchangeability, good repeatability, good temperature stability3. Uniform light splitting and stable transmission using high-quality transmission chips4. Ceramic ferrule, stable conversion5. ABS raw materials have the characteristics of compression resistance, impact resistance, heat resistance, low temperature resistance, etc.6. Wide range of uses, meeting the needs of different wavelengths, low insertion loss, and can be installed in various existing transfer boxes7. Insertion times: 300 times8. Insertion loss: 7.2dB9. Working temperature: -40 to 85 degrees Celsius10. Test wavelength: 1310nm11. Working wavelength: 1260nm-1650nm12. Number of interfaces: 513. Interface model: SC/UPC14. Spectral uniformity: 0.8dB15. Directivity: 55dB16. Temperature stability: 0.6dB17. Polarization dependent loss: 0.3dB18. Wavelength dependent loss: 1.0dB19. Return loss: 55dB20. Dimensions: 130 x 112 x 26mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 14cm * 4cm / 5.91inch * 5.51inch * 1.57inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs 40HQ: 412 cartons * 146 pcs = 60152 pcs

    €7,30

  • TL-B3-L15 10KM-15KM Mini Rechargeable Fiber Optical Red Light Sources Test Pen Clamshell Light Pen-garmade.com

    TL-B3-L15 10KM-15KM Mini Rechargeable Fiber Optical Red Light Sources Test Pen Clamshell Light Pen

    1. 650nm red light button: Long press the red light button to turn on the red light source and short press again to switch to the flashing/off state2. High-brightness LED lighting flashlight, convenient for construction work in dark environments3. The ceramic core can be replaced. When replacing the ceramic core, just remove the metal head4. Charge as you go, convenient and environmentally friendly. Built-in overvoltage protection circuit is fully charged and automatically cuts off the power5. Universal interface, supports a variety of wires, 2.5mm diameter universal nib, supports SC, ST, FC common interface wires6. Automatic shutdown function, automatically shut down after 10 minutes without operation7. Press the red light button + LED button at the same time for a few seconds, when the indicator light flashes 3 times, it means that the automatic shutdown function is turned on/off8. Working time: about 24 hours9. Measuring range: 10-15km10. Power supply voltage: 1.5v11. Power supply mode: USB charging/built-in lithium battery12. Battery capacity: 3.7v 600mah13. Storage temperature: -40 to 85 degrees Celsius14. Working temperature: -20 to 60 degrees Celsius15. Interface type: 2.5mm universal adapter16. Output wavelength: 650nm17. Output power: greater than 5mW / greater than 15mW / greater than 20mW / greater than 30mW18. Application: fiber splicing, testing, wire testing, network analyzer, spectrum analyzer19. Size: 125x35x17mm20. Net weight: 38gProduct list:-1 x red light pen-1 x lanyard-1 x packing box-1 x ceramic core-1 x instruction manual-1 x charging cableSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 6cm * 4cm / 5.91inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

    €18,60

  • Carrier-Grade Fiber Optic Connector Male-Female Coupler LC Male To SC Female Adapter-garmade.com

    Carrier-Grade Fiber Optic Connector Male-Female Coupler LC Male To SC Female Adapter

    1. Carrier-grade standard, low insertion loss, high efficiency and stability, long life2. Strong optical performance, strong stability and good repeatability3. Good interchangeability, good isolation effect, easy to learn4. Can effectively suppress ground loop noise, eliminate ground interference, effectively isolate the signal site from the main control terminal electrically, and avoid accidental damage to the main control terminal5. Advanced grinding equipment ensures that the center of the optical fiber is offset. It adopts a zirconia sleeve with high temperature resistance, acid resistance and alkali resistance (high density), which has good optical properties and good mechanical properties.6. Optical fiber is widely used in distribution frames, broadband network access in optical fiber communication systems, optical fiber CATV optical fiber instruments and other reliable performance7. Good temperature stability, low insertion loss, high return loss8. Insertion loss: less than or equal to 0.3dB9. Return loss: greater than or equal to 55dB10. Insertion times: more than 1000 times11. Ferrule Type: Ceramic12. Working temperature: -40 to 80 degrees Celsius13. Storage temperature: -55 to 85 degrees Celsius14. Ambient humidity: 95RH15. Accurate attenuation: less than 0.5db16. Wavelength parameters: single mode 1310-1550nm17. Wavelength: 1310-1550nmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 318 pcs = 56286 pcs 40HQ: 412 cartons * 318 pcs = 131016 pcs

    €7,82

  • 1pair YH-VD48508 SC 8-way Bidirectional Data Network Optical Transceiver Fiber Optic Transceiver(Black)-garmade.com

    1pair YH-VD48508 SC 8-way Bidirectional Data Network Optical Transceiver Fiber Optic Transceiver(Black)

    1. 8-way bidirectional data network optical transceiver2. Good compatibility, quality chip, stable performance, SC3. Plug and play, stable transmission, fully compatible4. Easy to use, two-way communication, good heat dissipation, stable performance, easy to use5. Long-distance transmission, optical fiber transmission distance up to 20KM (single-mode)6. No software, no drivers, wide range of uses, plug and play7. The design of multiple cooling ports on both sides of the fuselage can effectively dissipate heat and ensure the effective operation of the device. .8. Metal frosted shell, simple and beautiful, easy to install, no on-site debugging9. Humanized control design, support plug and play, more stable and safer10. Scope of application: multimedia teaching, security monitoring, remote video conferencing, radio and television transmission, community/campus monitoring construction11. Wavelength single mode: 1310nm, 1510nm12. Shell material: cold rolled sheet13. Fiber type: single mode single fiber14. Optical fiber interface: SC interface15. Power supply voltage AC220V DC5V16. Working temperature -5 to 70 degrees Celsius17. Transmission distance: 20km18. Terminal type: RS48519. Dimensions: 136 x 100 x 27mm20. Bare metal weight: 235g/set21. Gross weight: 726g/pairShipping list-1 x Optical Transmitter-1 x Receiver-1 x Instruction manual-2 x Power supplySpecification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 16cm * 12cm * 7cm / 6.3inch * 4.72inch * 2.76inch Qty per Carton 40 Carton Weight 30.00kgs / 66.14lb Carton Size 54cm * 41cm * 23cm / 21.26inch * 16.14inch * 9.06inch Loading Container 20GP: 523 cartons * 40 pcs = 20920 pcs 40HQ: 1215 cartons * 40 pcs = 48600 pcs

    €95,72

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 50mW Red-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 50mW Red

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €20,66

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 5mW Blue-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 5mW Blue

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €9,00

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 20mW Green-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 20mW Green

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €12,08

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 30mW Purple-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 30mW Purple

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €12,38

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 50mW Yellow-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 50mW Yellow

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €20,88

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 10mW Orange-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 10mW Orange

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €9,18

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 30mW Green+Orange-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 30mW Green+Orange

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €12,38

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 20mW White-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 20mW White

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €12,08

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 15mW Blue+Orange-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 15mW Blue+Orange

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €12,04

  • 1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 60mW Black-garmade.com

    1-60 km Optical Fiber Red Light Pen 5/10/15/20/30/50/60MW Red Light Source Light Pen, Specification: 60mW Black

    1. Material: ABS, aluminum alloy, electronic components2. Features: high performance, laser chip, pulse continuous wave3. Output power: 1-60mW4. Wavelength: 650nm5. Universal interface: 2.5mm (FC/SC/ST/LC)6. Working temperature: minus 10-60 degrees Celsius7. Batteries: AAA batteries x 2 (batteries are not included in delivery)8. Standard interface 2.5mm, suitable for FC/SC/ST/LC9. The metal head/ceramic core can be replaced by yourself10. One-button operation, simple and convenient11. Made of high-quality aluminum alloy, corrosion-resistant and comfortable to the touch12. Product size: 17.5 x 2.6 cm13. Weight: 120 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 3cm / 7.87inch * 2.76inch * 1.18inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

    €32,06

  • SC/UPC Male to SC/APC Female Fiber Adapter Connector Fiber Conversion Adapter ?-garmade.com

    SC/UPC Male to SC/APC Female Fiber Adapter Connector Fiber Conversion Adapter ?

    1. Material: ceramics, metal, electronic components2. Scope of use: red light pen, optical power meter, jumper, optical fiber communication room, optical test equipment, LAN wiring3. Function: low insertion loss, good repeatability, large return loss4. Interchangeability: 0.2dB5. Working wavelength: 1200-1600nm6. Loss rate: 0.5dB7. Insertion times: 10008. Working temperature: minus 40-95 degrees Celsius9. Storage temperature: minus 55-85 degrees Celsius10. Good inter-plug performance, good flame retardancy, high temperature resistance, environmental protection, high impact strength11. Low insertion loss, which can meet the transmission requirements of different wavelengths12. Good isolation effect, effectively suppress the noise of the ground loop, isolate other types of interference signals, and avoid accidental damage to the main control system13. Product size: 4.2 x 1 cm14. Weight: about 10 grams (including packaging)Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 9cm * 1cm / 2.36inch * 3.54inch * 0.39inch Qty per Carton 600 Carton Weight 7.10kgs / 15.65lb Carton Size 32cm * 38cm * 32cm / 12.6inch * 14.96inch * 12.6inch Loading Container 20GP: 685 cartons * 600 pcs = 411000 pcs 40HQ: 1590 cartons * 600 pcs = 954000 pcs

    €6,42

  • SPDIF Coaxial to RCA DTS AC3 Audio Decoder 5.1CH Optical Digital Amplifier Analog Converter & Amplifier HD Audio-garmade.com

    SPDIF Coaxial to RCA DTS AC3 Audio Decoder 5.1CH Optical Digital Amplifier Analog Converter & Amplifier HD Audio

    1. Signal to noise: 120dB2. Degree of separation: 85dB3. Frequency response: 20Hz-20KHz + - 0.5db4. Output voltage: 2.2V5. DC 5V 1A power supply output 110v-240v broadband convert DC5V power6. Converts DTS or AC3 digital audio source to 5.1 analog audio or stereo audio output.7. The L or R stereo analog signals after the digital processing chip converts it to 5.1 channel analog output8. Multi-channel audio input SPDIF, Coaxial, stereo 2 x SPDIF input, 1 x Coaxial input, 1 x STEREO9. 5.1 channel analog or stereo output

    €22,68

  • YQ-863 3.5mm Optical Fiber to RCA Digital to Analog Audio Adapter Bluetooth 5.1 Receiver-garmade.com

    YQ-863 3.5mm Optical Fiber to RCA Digital to Analog Audio Adapter Bluetooth 5.1 Receiver

    Features:1. With 3.5mm and 2 RCA 2 connection options, you can play music on 2 speakers at the same time2. Suitable for most speakers3. The effective connection distance is up to 10m, and the music playback can be controlled remotely4. Use the charging cable to connect to your car or other power source. When the car starts or has electricity, it will automatically turn on and automatically connect to the device you connected last time; when the car is turned off, it will automatically turn off5. Multi-point Bluetooth connection6. Easy to set upProduct specifications:1. USB cable length: 75cm2. Host weight: 34g3. USB cable weight: 18g4. Body size: 5.5x5.5x2.2cmPacking list:Host x 1USB cable x 1

    €14,24

  • Triple Steel Wire Long Range Outdoor Fiber Optic Drop Cable Patch Jumper with SC Connector, Cable Length: 300m-garmade.com

    Triple Steel Wire Long Range Outdoor Fiber Optic Drop Cable Patch Jumper with SC Connector, Cable Length: 300m

    1. The fiber optic drop cable patch cord has two connectors in each end of the cable to make connection; pigtail cable is one cable with a connector. The connectors are with SC type, ferrule to be polished as UPC. 2. Optical fiber patch cable is made up by optical communication unit, strengthen pieces and the sheath composition, that is put the optical communication unit in the middle, both sides parallel place two root non-metallic strengthen members or metal strengthening component phosphate steel wire, finally squeeze the black sheath into cable. 3. Special bending resistance of optical fiber, offer more bandwidth and enhance network transmission characteristic, easily realize the broadband, CATV and phone combination of three nets. 4. Cable simple structure, the function is strong. 5. The groove design, easy separating, convenient in, easy installation and maintenance. 6. It is suitable for residential homes, street homes and rural fiber FTTH homes. 7. Interface type: SC 8. Number of cores: single core 9. Mating times: more than 1000 times 10. Insertion loss: greater than 50 11. Return loss: less than 0.30 12. Repeatability: less than 0.10 13. Interchangeability: less than 0.20 14. Transmission distance: 1KM-3KM 15. Bending angle: more than 100 degrees 16. Product material: PVC + phosphating steel wire 17. Cable length: 300m

    €54,04

  • HT-30 30mW Visual Fault Locator Detector Tester Optical Laser Red Light Test Pen-garmade.com

    HT-30 30mW Visual Fault Locator Detector Tester Optical Laser Red Light Test Pen

    Feature: 1. Aluminum alloy body, sturdy and durable. 2. Apply the FC / ST / SC interface. 3. Economic tools for fiber tracking, fiber routing, and continuity switching during and after installation. 4. Find the breakpoint, the connection is poor, and the fiber is bent or cracked. 5. Slide switch design control cable tester. 6. Continuous wave and pulse mode, constant output power. 7. Strong light source and penetration, stable performance. 8. Dust-proof design keeps the fiber connector clean. 9. Pen design, small size, light weight, easy to carry and carry. Specification: 1. Output wavelength: 650nm. 2. Output power: more than 30mw. 3. CW frequency: 2HZ. 4. Laser type: LD. 5. Connector: Universal connector. 6. Operating temperature: 0 to 60 degrees Celsius. 7. Storage temperature: -20 to 70 degrees Celsius. 8. Power: 2 x AA batteries (purchased by yourself). 9. Size: about 17.5x2.6cm.

    €15,04

  • Aptx Bluetooth Transmitter Receiver Wireless Adapter Toslink/SPDIF-garmade.com

    Aptx Bluetooth Transmitter Receiver Wireless Adapter Toslink/SPDIF

    This wireless audio transceiver adopts latest BT 5.0 technology, allowing a fast connection and stable delivery. It has three ways of connection, AUX, RCA and optical connection. In Transmit (TX) mode, it can stream audio from your smart phones, laptops to any BT headphones or speakers. In Receive (RX) mode, It can receive wireless audio from your phone, tablets to your home stereo or speakers.Features:1.The optical transmission can deliver better signals and minimize noises to keep the best fidelity of sound.2.This Bluetooth adapter is both transmitter and receiver, designed for 2-way high-quality remote audio streaming.3.Compact size and lightweight, easy and convenient to store, durable to use.4.Three connection options, 3.5MM plug (AUX, RCA) and digital optical (SPDIF/TOSLINK), are suitable for most media devices, such as smart phones, laptops, speakers, earphones and so on.5.Adopt latest BT 5.0 technology, allowing a fast connection and stable delivery. And it can automatically reconnect to the last paired device easily once power on.Specifications:1.Product Name: Wireless Audio Receiver2.Bluetooth Version: V5.0 Class II3.Bluetooth Profile: RX: A2DP / AVRCP, TX: A2DP4.Chipset: CSR86755.Supported Codecs: AptX-HD / AptX-LL / AptX / FastStream / SBC6.Frequency: 2.402GHz-2.480GHz7.Battery Capacity: 400mAh Rechargeable Lithium Battery8.Transmitter / Receiver Working Time (AUX): 18 Hours9.Transmitter / Receiver Working Time (SPDIF): 15 Hours10.Charging Time: Approx. 2 Hours11.Charging Supply: 100-240V AC Adapter12.Item Size: 5.5*5.5*1.5cm / 2.17*2.17*0.59in13.Item Weight: 34.2g

    €37,68

  • 10/100/1000M Multimode Gigabit Adaptive Optical Transceiver-garmade.com

    10/100/1000M Multimode Gigabit Adaptive Optical Transceiver

    1. Standard: IEEE 802.3z/AB 1000Base-T / SC / LX / ZX 2. Interface: UTP RJ45 and Fiber: SC 3. Transfer rate: the UTP rate: 10/100 / 1000Mbps 1000Mbps; fiber: 4. Duplex mode: electrical port full-duplex or half duplex, optical port full-duplex 5. UTP: 5E, Category 6 6. Current: AC 220V (175 - 260V), 50Hz 7. The transceiver optical port only 1000M full duplex electrical port can work in 10M, 100M or 1000M, 10/100/1000M adaptive optical transceiver

    €62,88

  • Single-mode Fast Ethernet Fiber Transceiver-garmade.com

    Single-mode Fast Ethernet Fiber Transceiver

    1. Standard: IEEE 802.3u Fast Ethernet 10 /100 Base-TX and 100 Base-FX 2. Interface: UTP RJ45 and Fiber: SC 3. Transfer rate: the UTP rate: 10/100 / 1000Mbps 1000Mbps; fiber: 4. Duplex mode: electrical port full-duplex or half duplex, optical port full-duplex 5. Data transfer mode: 10 / 100Mbps 6. Power requirement: AC 100 -260V DC 1A@ + 5V 7. Cable: UTP: Cat.5UTP cable

    €23,48

  • 10/100/1000M Single mode Gigabit Adaptive Optical Transceiver (HTB-GS-03)-garmade.com

    10/100/1000M Single mode Gigabit Adaptive Optical Transceiver (HTB-GS-03)

    1. Standard: IEEE 802.3z/AB 1000Base-T / SC / LX / ZX 2. Interface: UTP RJ45 and Fiber: SC 3. Transfer rate: the UTP rate: 10/100 / 1000Mbps 1000Mbps; fiber: 4. Duplex mode: electrical port full-duplex or half duplex, optical port full-duplex 5. UTP: 5E, Category 6 6. Current: AC 220V (175 - 260V), 50Hz 7. The transceiver optical port only 1000M full duplex electrical port can work in 10M, 1 00M or 1000M, 10/100/1000M adaptive optical transceiver

    €53,02

  • Multi-mode Fast Ethernet Fiber Transceiver-garmade.com

    Multi-mode Fast Ethernet Fiber Transceiver

    specification: 1. Fiber Type: single-mode 2. Condition: New in Box-Includes Power Cord and Manual 3. Operating standards: IEEE802.3u, 10 / 100Base-TX and 100Base-FX 4. MAC address table: 1K Connector: 1. UTP: RJ-45 10 / 100Mbps; 2. Fiber: SC 100Mbps Cable: 1. UTP: Cat. 5 UTP (the max distance up to 100m) 2. Fiber (single mode): 50/125, 62.5 / 125 m (the max distance up to 2km or 5km) Flow Control 1. Full Duplex: Supporting standard IEEE802.3x 2. Half Duplex: Backpressure 3. LED: Power, FX FDX, FX Link / Act, TX 100, TX FDX, TX Link / Act. 4. Power: AC 110V-240V to DC 5V; DC 48V to DC 5V. 5. Ambient Temperature: 0-70 degree 6. Humidity: 5%-90% Dimensions: 1. Internal power: 30 ?? 110 ?? 140mm 2. External power: 26 ?? 70 ?? 93mm

    €19,98

  • 8 Fiber Optic Terminal Box / Digital Video Terminals(Black)-garmade.com

    8 Fiber Optic Terminal Box / Digital Video Terminals(Black)

    1. AlphaAmbient temperature: -25 - +40 Degrees Celsius 2. Relative Humidity: Less than or equal to 85% (+30 Degrees Celsius) 3. Atmospheric pressure: 70kPa - 106kPa 4. Insulation resistance: cable terminal and metal components and fiber optic cable metal to strengthen the core, the fiber optic cable between the metal components, fiber metal structures and between the insulation resistance should be greater than 2 x 104Milliohm 5. Dielectric strength: between cable terminals and metal components and fiber metal reinforced core fiber optic cable between the metal components, fiber optic cable between the metal components and ground 15kV DC voltage, 1min without breakdown, arcing phenomena Product Features: 1. can be used for the two-cable with fiber optic cable to strengthen the core holder, and fixed fiber optic cable jacket, Block has a protective earthing. 2. the set of fiber optic cable, connecting pigtail, pigtails, jumpers, asylum and other functions as one. 3. line redundancy long with a capacity plate asylum protection. 4. disk fiber plate for layering, you can easily increase or decrease in construction, operation convenience. 5. disk fiber plate were given to mark, easy to identify. 6. fiber pigtail, patch cord, import and export rubber protective sleeve to control the radius of curvature in the 3.75CM above. 7. the terminal box by screws, can be easily fixed on the wall or the user that the right place 8. Widely used in city, agricultural, then the network system, data, image transmission systems, CATV cable television series, for indoor fiber optic cable through access and branch continuation, played the role of the the pigtail disk storage and protection of joints, the use of cold-rolled steelelectrostatic spray made a??a??reasonable structure, beautiful big before the fiber optic cable to strengthen the core in the terminal

    €6,60

  • 12 Fiber Optic Terminal Box / Digital Video Terminals-garmade.com

    12 Fiber Optic Terminal Box / Digital Video Terminals

    1. AlphaAmbient temperature: -25 - +40 Degrees Celsius 2. Relative Humidity: Less than or equal to 85% (+30 Degrees Celsius) 3. Atmospheric pressure: 70kPa - 106kPa 4. Insulation resistance: cable terminal and metal components and fiber optic cable metal to strengthen the core, the fiber optic cable between the metal components, fiber metal structures and between the insulation resistance should be greater than 2 x 104Milliohm 5. Dielectric strength: between cable terminals and metal components and fiber metal reinforced core fiber optic cable between the metal components, fiber optic cable between the metal components and ground 15kV DC voltage, 1min without breakdown, arcing phenomena Product Features: 1. can be used for the two-cable with fiber optic cable to strengthen the core holder, and fixed fiber optic cable jacket, Block has a protective earthing. 2. the set of fiber optic cable, connecting pigtail, pigtails, jumpers, asylum and other functions as one. 3. line redundancy long with a capacity plate asylum protection. 4. disk fiber plate for layering, you can easily increase or decrease in construction, operation convenience. 5. disk fiber plate were given to mark, easy to identify. 6. fiber pigtail, patch cord, import and export rubber protective sleeve to control the radius of curvature in the 3.75CM above. 7. the terminal box by screws, can be easily fixed on the wall or the user that the right place 8. Widely used in city, agricultural, then the network system, data, image transmission systems, CATV cable television series, for indoor fiber optic cable through access and branch continuation, played the role of the the pigtail disk storage and protection of joints, the use of cold-rolled steelelectrostatic spray made a??a??reasonable structure, beautiful big before the fiber optic cable to strengthen the core in the terminal

    €12,14

  • SPDIF / TOSLINK Power Adapter Digital Optical Audio Splitter Amplifier 1x3 Supports 5.1-garmade.com

    SPDIF / TOSLINK Power Adapter Digital Optical Audio Splitter Amplifier 1x3 Supports 5.1

    Introduction: This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation. It supports LPCM2.0, DTS and Dolby-AC3 audio formats. Features: 1. One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device 2. Maintain digital sonic integrity and provides crystal clear digital sound quality over the long range 3. Support signal retiming 4. One way optical fiber signal splits into three identical outputs at the same time 5. Support Dolby Digital & DTS 5.1 6. Support LPCM Stereo 32 kHz 44.1 kHz 48 kHz and 96 kHz 7. Integrated circuit implementation delivers unsurpassed reliability and fidelity. Virtually no loss of quality 8. Use optical fiber cable loss less the 0.2Db/m, Output distance can be up to 40m. 9. Over-voltage protection 10. Plug and play, Installs in minutes 11. DC 5V/500mA power supply Specification: 1. Audio format support: LPCM2.0/DTS/Dolby-AC3 2. Peak wave length: 650nm 3. Max baud rate: 16Mbps 4. Output cable distance: >= 40m (Use the optical fiber cable loss less the 0.2Db/m) 5. Max working current: 100mA 6. Input: AC (50HZ, 60HZ) 100V-240V 7. Output: DC5V/500mA 8. Operating Temperature range :( 0 to +40 Celsius) 9. Operating Humidity range: 5 to 90 percent RH (No Condensation) 10. Weight: 35g 11. Dimension: 54mm x 54mm x 23.5mm

    €23,70

  • SC-SC Dual-Core Multi Mode Fiber Optic Jumper-garmade.com

    SC-SC Dual-Core Multi Mode Fiber Optic Jumper

    1. Product name: SC-SC Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,42

  • SC-SC Dual-Core Single Mode Fiber Optic Jumper-garmade.com

    SC-SC Dual-Core Single Mode Fiber Optic Jumper

    1. Product name: SC-SC Dual-Core Single Mode Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,32

  • FC-FC Dual-Core Multi Mode Fiber Optic Jumper-garmade.com

    FC-FC Dual-Core Multi Mode Fiber Optic Jumper

    1. Product name: FC-FC Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: FC-FC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,52

  • LC-LC Dual-Core Multi Mode Fiber Optic Jumper-garmade.com

    LC-LC Dual-Core Multi Mode Fiber Optic Jumper

    1. Product name: LC-LC Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: LC-LC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,76

  • ST-ST Dual-Core Multi Mode Fiber Optic Jumper-garmade.com

    ST-ST Dual-Core Multi Mode Fiber Optic Jumper

    1. Product name: ST-ST Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: ST-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,28

  • SC-SC Multimode Duplex Fiber Flange / Connector / Adapter / Lotus Root Device(Blue)-garmade.com

    SC-SC Multimode Duplex Fiber Flange / Connector / Adapter / Lotus Root Device(Blue)

    1. Scope of application: optical fiber communication network , fiber-optic broadband access networks, optical fiber of CATV , fiber optic instrumentation, optical fiber LAN 2. Composition of raw materials: precision ceramic casing 3. Flame resistance, reaching a 94 - V0 high-temperature environmental protection, comply with ROHS environmental requirements 4. Impact strength , look beautiful 5. Rugged and easy to use

    €3,42

  • LC-LC Single-Mode Simplex Fiber Flange / Connector / Adapter / Lotus Root Device(Blue)-garmade.com

    LC-LC Single-Mode Simplex Fiber Flange / Connector / Adapter / Lotus Root Device(Blue)

    1. Scope of application: optical fiber communication network , fiber-optic broadband access networks, optical fiber of CATV , fiber optic instrumentation, optical fiber LAN 2. Composition of raw materials: precision ceramic casing 3. Flame resistance, reaching a 94 - V0 high-temperature environmental protection, comply with ROHS environmental requirements 4. Impact strength , look beautiful 5. Rugged and easy to use

    €4,38

  • SC-LC Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m-garmade.com

    SC-LC Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m

    1. Product name: SC-LC Fiber Optic Jumper 2. Connector type: SC-LC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,88

  • SC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m-garmade.com

    SC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m

    1. Product name: SC-ST Fiber Optic Jumper 2. Connector type: SC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,44

  • SC-FC Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m-garmade.com

    SC-FC Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m

    1. Product name: SC-FC Fiber Optic Jumper 2. Connector type: SC-FC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,98

  • SC-FC Dual-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    SC-FC Dual-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: SC-FC Fiber Optic Jumper 2. Connector type: SC-FC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,40

  • LC-SC Single-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    LC-SC Single-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-SC Single-Core Single Mode Fiber Optic Jumper 2. Connector type: LC-SC 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,66

  • LC-ST Dual-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    LC-ST Dual-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-ST Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,94

  • LC-FC Dual-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    LC-FC Dual-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-FC Fiber Optic Jumper 2. Connector type: LC-FC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €4,18

  • LC-ST Single-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    LC-ST Single-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-ST Single-Core Single Mode Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,46

  • FC-ST Dual-Core Single Mode Fiber Optic Jumper,Length: 3m-garmade.com

    FC-ST Dual-Core Single Mode Fiber Optic Jumper,Length: 3m

    1. Product name: FC-ST Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,14

  • FC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m-garmade.com

    FC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m

    1. Product name: FC-ST Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €6,12

  • LC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m-garmade.com

    LC-ST Dual-Core Multi Mode Fiber Optic Jumper,Length: 3m

    1. Product name: LC-ST Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

    €5,72

Login

Forgot your password?

Don't have an account yet?
Create account