Xiaomi Replacement Parts Manual

1671 products


  • EDA007466705.jpg@7e7e85133e88a080990e3aaf6ef39382

    For Redmi A7 4G Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Redmi A7 4G 171.8mm Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €25,59

  • SPS9504G.jpg@87fe4b91b6882d4dfb17b258a4a50124

    For Xiaomi 14T Original Middle Frame Bezel Plate (Green)

    1. Middle frame bezel replacement for Xiaomi 14T. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  14T Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 6.30kgs / 13.89lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €17,18

  • SPS9504L.jpg@9db227f0e9eec717465d26d4a89a4978

    For Xiaomi 14T Original Middle Frame Bezel Plate (Blue)

    1. Middle frame bezel replacement for Xiaomi 14T. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  14T Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 6.30kgs / 13.89lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €17,18

  • SPS8502S.jpg@2624dd38ea66fbfa4ce83aa8b54f3d93

    For Xiaomi Redmi Turbo 3 Camera Lens Cover (Silver)

    1. Camera lens cover replacement for Xiaomi Redmi Turbo 3. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts. Specification: General Compatible with Xiaomi:  Redmi Turbo 3 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €7,61

  • SPS8501G.jpg@334e84fdcf4cffaf01351688a144fbda

    For Xiaomi Poco F6 Camera Lens Cover (Green)

    1. Camera lens cover replacement for Xiaomi Poco F6. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  Poco F6 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €7,61

  • SPS8501B.jpg@3dc79eda1d721392cba8f219e74a9f77

    For Xiaomi Poco F6 Camera Lens Cover (Black)

    1. Camera lens cover replacement for Xiaomi Poco F6. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  Poco F6 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €7,61

  • SPS8502B.jpg@3dc79eda1d721392cba8f219e74a9f77

    For Xiaomi Redmi Turbo 3 Camera Lens Cover (Black)

    1. Camera lens cover replacement for Xiaomi Redmi Turbo 3. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts. Specification: General Compatible with Xiaomi:  Redmi Turbo 3 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €7,61

  • RPS0548LL.jpg@baa61ce85d5e8f020e11e47edaa970a5

    For Xiaomi Redmi A3 4G OEM Battery Back Cover with Camera Lens Frame(Blue)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi A3 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi A3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,49

  • RPS0546BL.jpg@5316d866b18e334f098fe9b49dbe1677

    For Xiaomi Redmi A3 4G OEM Back Cover(Black)

    1. Back cover replacement for Xiaomi Redmi A3 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi A3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €6,68

  • RPS0439GL.jpg@f9316d5649831be963a12b32a43d0795

    For Xiaomi Redmi Note 13 Pro 4G OEM Battery Back Cover with Camera Lens Frame(Green)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro 4G Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €9,83

  • RPS0548BL.jpg@f8c0079db7a7ade66fd8b987f844139a

    For Xiaomi Redmi A3 4G OEM Battery Back Cover with Camera Lens Frame(Black)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi A3 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi A3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,49

  • RPS0546LL.jpg@8fb08aa7524317d512852f3f87839627

    For Xiaomi Redmi A3 4G OEM Back Cover(Blue)

    1. Back cover replacement for Xiaomi Redmi A3 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi A3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €6,68

  • RPS0439PL.jpg@2eb99544c188a551f0cb59342de4d8c8

    For Xiaomi Redmi Note 13 Pro 4G OEM Battery Back Cover with Camera Lens Frame(Purple)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro 4G Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €9,83

  • EDA007466706.jpg@31aab23dab954e1082b506f45f227334

    For Redmi A7 Pro 4G Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Redmi A7 Pro 4G 171mm Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €27,29

  • EDA007466704.jpg@002fcd50ae98db87e4dec8ed3deba412

    For Xiaomi Redmi A3 Pro Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Redmi A3 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €24,82

  • EDA005665549.jpg@6dbe58d844512ab9499a13d19fc1bda0

    For Xiaomi Poco C81 / C81 Pro Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Poco C81 Pro 4G Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 8.60kgs / 18.96lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €23,85

  • EDA005665546.jpg@e0fad57deecb259ff229ba0f43698759

    For Redmi K90 Ultra Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi K90 Ultra 5G Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 6.60kgs / 14.55lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €191,93

  • EDA005665545.jpg@7e6fac93f9712ee4d2ecc53d8c98ef7c

    For Redmi Note 17 Pro Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi Note 17 Pro 5G Global 163mm Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €142,45

  • EDA005665551.jpg@24281c3c8bde75ade49d70b3d794218b

    For Redmi A7 4G Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi A7 4G 171.8mm Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 8.60kgs / 18.96lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €22,15

  • EDA005665550.jpg@b5c4b0e00599a1e7838c928a122ca388

    For Redmi R70 / R70m Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi R70 5G , Redmi R70m 5G Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 8.60kgs / 18.96lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €23,85

  • EDA005665547.jpg@5554fe697edaa039507b4e71d43867ea

    For Xiaomi 17T Pro Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  17T Pro 5G Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €170,81

  • EDA005665532.jpg@e5671cb008faf88ef8885f5592b38571

    For Xiaomi Redmi A7 Pro 4G/5G Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi A7 Pro 5G 171mm , Redmi A7 Pro 4G 171mm Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 7.30kgs / 16.09lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €23,77

  • EDA005665548.jpg@3a11e223c7345f327510bc23373a04be

    For Redmi 17C Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Redmi 17C 4G Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 23cm * 11cm * 3.5cm / 9.06inch * 4.33inch * 1.38inch Qty per Carton 80 Carton Weight 8.60kgs / 18.96lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 80 pcs = 44720 pcs 40HQ: 1299 cartons * 80 pcs = 103920 pcs

    €23,85

  • EDA007466702.jpg@3302c1d3e887deb2a4a64f98905b9cf0

    For Xiaomi Redmi 14R Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Redmi 14R Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €24,82

  • EDA007466703.jpg@ee9c1b4062bb1de3cb013a3f177a2117

    For Xiaomi Poco C75 Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Poco C75 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €24,82

  • EDA007466701.jpg@3302c1d3e887deb2a4a64f98905b9cf0

    For Xiaomi Redmi 14C 4G Original LCD Screen Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Xiaomi:  Redmi 14C 4G Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €24,82

  • EDA005665512.jpg@69f94f580e6d7a135e643bd50ff72449

    For Xiaomi Poco M7 4G Original LCD Screen With Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Xiaomi:  Poco M7 4G 171mm Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 7.30kgs / 16.09lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €30,60

  • SPS9097LL.jpg@13da44ab4650dd37f29b9babcc3470ee

    For Xiaomi Redmi Note 13 Pro+ 5G OEM Battery Back Cover(Blue)

    1. Back cover replacement for Xiaomi Redmi Note 13 Pro+ 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Certificate GPSR Compatible with Xiaomi:  Redmi Note 13 Pro+ Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 4.30kgs / 9.48lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,99

  • SPS9504S.jpg@acd5168364c9ad61d014d36f019f5131

    For Xiaomi 14T Original Middle Frame Bezel Plate (Silver)

    1. Middle frame bezel replacement for Xiaomi 14T. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  14T Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 6.30kgs / 13.89lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €17,18

  • RPS0624GL.jpg@9d7605f52224c72f651ad3416038062b

    For Xiaomi Poco X7 Pro Original Back Cover(Green)

    1. Back cover replacement for Xiaomi Poco X7 Pro 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts Specification: General Compatible with Xiaomi:  Poco X7 Pro Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €11,55

  • RPS0440WL.jpg@80a3c4002c0b353e78c4e1f4c011f82c

    For Xiaomi Redmi Note 13 Pro 5G OEM Battery Back Cover with Camera Lens Frame(White)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €9,85

  • RPS0737GL.jpg@ad1f88d9e86846ddc6c9ea5512450908

    For Xiaomi Redmi Note 14 Pro+ 5G OEM Battery Back Cover with Camera Lens Frame(Green)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 14 Pro+ 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 14 Pro+ 5G Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €10,21

  • RPS0440BL.jpg@b7f0c98d7ea2a3627fea33be87623841

    For Xiaomi Redmi Note 13 Pro 5G OEM Battery Back Cover with Camera Lens Frame(Black)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €8,52

  • RPS0439BL.jpg@f2966bb9a99d1005c30107a191cc7aa3

    For Xiaomi Redmi Note 13 Pro 4G OEM Battery Back Cover with Camera Lens Frame(Black)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro 4G Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €9,83

  • RPS0440LL.jpg@92cbd1a48250a76e3180961b851069f8

    For Xiaomi Redmi Note 13 Pro 5G OEM Battery Back Cover with Camera Lens Frame(Blue)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 13 Pro 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 13 Pro Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €10,19

  • RPS0737BL.jpg@a0db4d053de281a3a99d1672299bdf52

    For Xiaomi Redmi Note 14 Pro+ 5G OEM Battery Back Cover with Camera Lens Frame(Black)

    1. Back cover with camera lens cover replacement for Xiaomi Redmi Note 14 Pro+ 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi Note 14 Pro+ 5G Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €10,21

  • SPS9504B.jpg@6258c26ef82edbaab1229b9311b45dc9

    For Xiaomi 14T Original Middle Frame Bezel Plate (Black)

    1. Middle frame bezel replacement for Xiaomi 14T. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  14T Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 6.30kgs / 13.89lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €17,18

  • RPS0624BL.jpg@e9ea89bd8fa491c43fcafde3a8921481

    For Xiaomi Poco X7 Pro Original Back Cover(Black)

    1. Back cover replacement for Xiaomi Poco X7 Pro 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts Specification: General Compatible with Xiaomi:  Poco X7 Pro Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.00kgs / 11.02lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €11,55

  • RPS0517S.jpg@6435703810cdefb8579c1aee205949f4

    For Xiaomi Redmi Note 11 Pro 4G Middle Frame Bezel Plate (Silver)

    1. Middle frame bezel replacement for Xiaomi Redmi Note 11 Pro 4G. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  Redmi Note 11 Pro Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,85

  • RPS0724.jpg@2dc9bc60dc722ee20a24ce2f0a3fdd96

    For Xiaomi 13 Lite 10pcs Back Camera Lens

    1. Replacement back camera lens. 2. Replace the old, broken, cracked, damaged one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  13 Lite Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 21.00kgs / 46.30lb Carton Size 42cm * 30cm * 32cm / 16.54inch * 11.81inch * 12.6inch Loading Container 20GP: 661 cartons * 1000 pcs = 661000 pcs 40HQ: 1535 cartons * 1000 pcs = 1535000 pcs

    €7,99

  • RPS0517D.jpg@4523ecc81b37e57fba8eaa5f16bc25b2

    For Xiaomi Redmi Note 11 Pro 4G Middle Frame Bezel Plate (Dark Blue)

    1. Middle frame bezel replacement for Xiaomi Redmi Note 11 Pro 4G. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  Redmi Note 11 Pro Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,85

  • RPS1704.jpg@f6c0378eff7a6a89aa0be28e63a09ffa

    For Xiaomi Pad 5 Pro Original Charging Port Board

    1. Charging port board replacement part for Xiaomi Pad 5 Pro. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with Xiaomi:  Pad 5 Pro Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 30cm * 32cm * 32cm / 11.81inch * 12.6inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €18,82

  • RPS0517L.jpg@170f3c2358e1fc7d328e6776406a9c2b

    For Xiaomi Redmi Note 11 Pro 4G Middle Frame Bezel Plate (Blue)

    1. Middle frame bezel replacement for Xiaomi Redmi Note 11 Pro 4G. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  Redmi Note 11 Pro Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,85

  • RPS0517B.jpg@f84b79fb3a71477893be5b2a330f760b

    For Xiaomi Redmi Note 11 Pro 4G Middle Frame Bezel Plate (Black)

    1. Middle frame bezel replacement for Xiaomi Redmi Note 11 Pro 4G. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation. Specification: General Compatible with Xiaomi:  Redmi Note 11 Pro Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 5.60kgs / 12.35lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    €7,85

  • EDA009143230.jpg@241f044de961f237430ce505811453f2

    For Xiaomi Redmi K60 10pcs LCD Display FPC Connector On Motherboard

    1. LCD display FPC connector on motherboard replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  Redmi K60 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 900 Carton Weight 10.00kgs / 22.05lb Carton Size 27cm * 32cm * 32cm / 10.63inch * 12.6inch * 12.6inch Loading Container 20GP: 964 cartons * 900 pcs = 867600 pcs 40HQ: 2239 cartons * 900 pcs = 2015100 pcs

    €8,64

  • EDA009010436.jpg@c27096ed3fe5842e3ffdd105487d4c6d

    For Xiaomi Redmi K60 Charging Port Board with iC, Supporting Fast Charging

    1. Charging port board with IC and support fast charging function replacement part2. Replace your broken or unusable item with a new one3. Each item has been checked and in good condition before shipping4. Completely fit and work5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Redmi K60 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €9,08

  • EDA009010428.jpg@803fccf945b52e68de02863b03051746

    For Xiaomi Poco F4 Charging Port Board with iC, Supporting Fast Charging

    1. Charging port board with IC and support fast charging function replacement part2. Replace your broken or unusable item with a new one3. Each item has been checked and in good condition before shipping4. Completely fit and work5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with Xiaomi:  Poco F4 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €6,86

  • EDA008419527.jpg@be4f40704a1240f6de992d6dc392cc2d

    For Xiaomi Redmi Note 11 Pro+ 5G India Original Speaker Ringer Buzzer

    1. Loudspeaker replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  Redmi Note 11 Pro+ 5G Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    €6,86

Login

Forgot your password?

Don't have an account yet?
Create account