FNIRSI LC1020E Handheld Digital Bridge Tester Capacitance Resistance Inductance Tester


1. Automatically identify components, automatically select based on component characteristics, making the measurement process more convenient and efficient
2. Multiple frequency tests, effective value test levels. Supports five test frequencies: 100Hz, 120KHz, 1kHz, 10kHz, and 100KHz. It is suitable for the measurement requirements of different application scenarios. With effective value test levels of 0.1V, 0.3V, and 0.6Vrms, the measurement results are more accurate and reliable
3. Four-segment digital display, with high precision, capable of simultaneously showing main and auxiliary parameters
4. Internal bias function, eliminating material nonlinearity, restoring true capacity, enabling precise measurement and control of nonlinear components, weak signals, or complex environments
5. One-click locking and recording, making measurement more efficient. Press lightly to lock the current reading, press for a long time to activate the recording mode. The test results are classified and statistically analyzed in real time. The measurement is accurate, clear to view, and the detection efficiency is doubled. It enables you to easily control each measurement
6. Five test scenarios, supporting precise measurement of capacitors, resistors, inductors impedance, electrolytic capacitors, etc
7. Compact handheld design, allowing for precise measurement anytime and anywhere
8. Open circuit/closed circuit correction function, used to eliminate systematic errors introduced by test fixtures and cables, which directly affect the accuracy of the measurement results

Parameters
1. Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz
2. Basic accuracy: 0.3%
3. Display screen: 2.8 inch TFT liquid crystal display
4. Display digits: main parameter: 4 1/2 digits, secondary parameter: 4 1/2 digits
5. Test level: 0.1V, 0.3V, 0.6V
6. Calibration function: open circuit calibration, short circuit calibration
7. Internal bias: 0.0V, 0.5V
8. Test port configuration: three-terminal, five-terminal
9. Output impedance: 100Ω
10. Communication interface: USB-TypeC (virtual serial port)
11. Comparison function: used to calculate the relative error between the measured value of the component and the nominal value, displayed in percentage, and provide screening results. Nominal value and tolerance can be set, and the tolerance range can be defined from 0.1% to 99.9%
12. Recording function: check whether the data of the tested component conforms to the set nominal value and tolerance, record the number of successful and failed measurement data
13. Battery capacity: 3000mAh
14. Supported languages: Chinese, English


Specification:
Package Weight
One Package Weight 0.70kgs / 1.55lb
One Package Size 24cm * 16cm * 8cm / 9.45inch * 6.3inch * 3.15inch
Qty per Carton 16
Carton Weight 13.00kgs / 28.66lb
Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch
Loading Container 20GP: 461 cartons * 16 pcs = 7376 pcs
40HQ: 1071 cartons * 16 pcs = 17136 pcs

FNIRSI LC1020E Handheld Digital Bridge Tester Capacitance Resistance Inductance Tester

Product form

SKU: TBD0606427901

  • In stock (Processing Time 1 - 72 hours)

$119.54

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Automatically identify components, automatically select based on component characteristics, making the measurement process more convenient and efficient
    2. Multiple frequency tests, effective value test levels. Supports five test frequencies: 100Hz, 120KHz, 1kHz, 10kHz, and 100KHz. It is suitable for the measurement requirements of different application scenarios. With effective value test levels of 0.1V, 0.3V, and 0.6Vrms, the measurement results are more accurate and reliable
    3. Four-segment digital display, with high precision, capable of simultaneously showing main and auxiliary parameters
    4. Internal bias function, eliminating material nonlinearity, restoring true capacity, enabling precise measurement and control of nonlinear components, weak signals, or complex environments
    5. One-click locking and recording, making measurement more efficient. Press lightly to lock the current reading, press for a long time to activate the recording mode. The test results are classified and statistically analyzed in real time. The measurement is accurate, clear to view, and the detection efficiency is doubled. It enables you to easily control each measurement
    6. Five test scenarios, supporting precise measurement of capacitors, resistors, inductors impedance, electrolytic capacitors, etc
    7. Compact handheld design, allowing for precise measurement anytime and anywhere
    8. Open circuit/closed circuit correction function, used to eliminate systematic errors introduced by test fixtures and cables, which directly affect the accuracy of the measurement results

    Parameters
    1. Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz
    2. Basic accuracy: 0.3%
    3. Display screen: 2.8 inch TFT liquid crystal display
    4. Display digits: main parameter: 4 1/2 digits, secondary parameter: 4 1/2 digits
    5. Test level: 0.1V, 0.3V, 0.6V
    6. Calibration function: open circuit calibration, short circuit calibration
    7. Internal bias: 0.0V, 0.5V
    8. Test port configuration: three-terminal, five-terminal
    9. Output impedance: 100Ω
    10. Communication interface: USB-TypeC (virtual serial port)
    11. Comparison function: used to calculate the relative error between the measured value of the component and the nominal value, displayed in percentage, and provide screening results. Nominal value and tolerance can be set, and the tolerance range can be defined from 0.1% to 99.9%
    12. Recording function: check whether the data of the tested component conforms to the set nominal value and tolerance, record the number of successful and failed measurement data
    13. Battery capacity: 3000mAh
    14. Supported languages: Chinese, English


    Specification:
    Package Weight
    One Package Weight 0.70kgs / 1.55lb
    One Package Size 24cm * 16cm * 8cm / 9.45inch * 6.3inch * 3.15inch
    Qty per Carton 16
    Carton Weight 13.00kgs / 28.66lb
    Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch
    Loading Container 20GP: 461 cartons * 16 pcs = 7376 pcs
    40HQ: 1071 cartons * 16 pcs = 17136 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account