WAVESHARE ESP32-S3-RS485-CAN Industrial Control Board Communication Device Supports WiFi / Bluetooth Built-In Multiple Protection Circuits


1. Microcontroller: ESP32-S3 (default is ESP32-S3R8 chip)
2. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)
3. USB interface:
- Interface type: Type-C
- Power supply voltage: 5V
- Functions: power supply for the device, USB communication, firmware download, etc.
4. Isolated RS485 communication interface:
- Interface type: terminal block
- Direction control: automatically controlled by the main control hardware flow setting
- Interface protection: provides TVS diode protection, surge and static protection
- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap
5. Isolated CAN communication interface:
- Interface type: terminal block
- Direction control: hardware automatically determines and controls the data transmission direction
- Interface protection: provides TVS diode protection, surge and static protection
- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap
6. Indicator lights:
- PWR: power indicator light, connected to USB, turns red when voltage is detected
- RS485: RS485 indicator light: Green when data is sent from the RS485 interface, blue when data is sent back from the RS485 interface
- CAN: CAN indicator light, flashes when data communication exists at the CAN interface
7. Terminal power supply range: 7V - 36V
8. Shell: rail-mounted protective shell
9. Size: about 9.16 x 2.33 x 5.87cm

Feature:
1. Based on the ESP32-S3 single-chip microcontroller, it is equipped with an Xtensa 32-bit LX7 dual-core processor with a maximum clock frequency of 240MHz
2. It integrates 2.4GHz Wi-Fi and low-power Bluetooth 5 (LE) dual-mode wireless communication, featuring excellent radio performance
3. It has an isolated RS485 interface, facilitating the external expansion of various RS485 Modbus industrial expansion modules or sensors
4. It has an isolated CAN interface, facilitating the external expansion of various CAN devices
5. It has an edge connector interface, allowing for the connection of other devices
6. It has a USB Type-C interface, which can be used for power supply and download debugging, facilitating development use
7. It has an isolated wiring terminal power supply interface, supporting a wide voltage range of 7V - 36V, facilitating the use of industrial power supply ports
8. It has an RTC clock chip, supporting timing tasks
9. It has digital isolation to avoid external signal interference to the control chip
10. It has an integrated power isolation unit, which can provide stable isolated voltage, and the isolated end does not require additional power supply
11. It has RS485 receiver and transmitter indicator lights and CAN operation indicator lights, facilitating the perception of the devices operating status


Specification:
Package Weight
One Package Weight 0.20kgs / 0.45lb
One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch
Qty per Carton 100
Carton Weight 21.00kgs / 46.30lb
Carton Size 50cm * 39cm * 35cm / 19.69inch * 15.35inch * 13.78inch
Loading Container 20GP: 390 cartons * 100 pcs = 39000 pcs
40HQ: 907 cartons * 100 pcs = 90700 pcs

WAVESHARE ESP32-S3-RS485-CAN Industrial Control Board Communication Device Supports WiFi / Bluetooth Built-In Multiple Protection Circuits

Product form

SKU: TBD0606432901

  • In stock (Processing Time 1 - 72 hours)

$43.39

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Microcontroller: ESP32-S3 (default is ESP32-S3R8 chip)
    2. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)
    3. USB interface:
    - Interface type: Type-C
    - Power supply voltage: 5V
    - Functions: power supply for the device, USB communication, firmware download, etc.
    4. Isolated RS485 communication interface:
    - Interface type: terminal block
    - Direction control: automatically controlled by the main control hardware flow setting
    - Interface protection: provides TVS diode protection, surge and static protection
    - Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap
    5. Isolated CAN communication interface:
    - Interface type: terminal block
    - Direction control: hardware automatically determines and controls the data transmission direction
    - Interface protection: provides TVS diode protection, surge and static protection
    - Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap
    6. Indicator lights:
    - PWR: power indicator light, connected to USB, turns red when voltage is detected
    - RS485: RS485 indicator light: Green when data is sent from the RS485 interface, blue when data is sent back from the RS485 interface
    - CAN: CAN indicator light, flashes when data communication exists at the CAN interface
    7. Terminal power supply range: 7V - 36V
    8. Shell: rail-mounted protective shell
    9. Size: about 9.16 x 2.33 x 5.87cm

    Feature:
    1. Based on the ESP32-S3 single-chip microcontroller, it is equipped with an Xtensa 32-bit LX7 dual-core processor with a maximum clock frequency of 240MHz
    2. It integrates 2.4GHz Wi-Fi and low-power Bluetooth 5 (LE) dual-mode wireless communication, featuring excellent radio performance
    3. It has an isolated RS485 interface, facilitating the external expansion of various RS485 Modbus industrial expansion modules or sensors
    4. It has an isolated CAN interface, facilitating the external expansion of various CAN devices
    5. It has an edge connector interface, allowing for the connection of other devices
    6. It has a USB Type-C interface, which can be used for power supply and download debugging, facilitating development use
    7. It has an isolated wiring terminal power supply interface, supporting a wide voltage range of 7V - 36V, facilitating the use of industrial power supply ports
    8. It has an RTC clock chip, supporting timing tasks
    9. It has digital isolation to avoid external signal interference to the control chip
    10. It has an integrated power isolation unit, which can provide stable isolated voltage, and the isolated end does not require additional power supply
    11. It has RS485 receiver and transmitter indicator lights and CAN operation indicator lights, facilitating the perception of the devices operating status


    Specification:
    Package Weight
    One Package Weight 0.20kgs / 0.45lb
    One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch
    Qty per Carton 100
    Carton Weight 21.00kgs / 46.30lb
    Carton Size 50cm * 39cm * 35cm / 19.69inch * 15.35inch * 13.78inch
    Loading Container 20GP: 390 cartons * 100 pcs = 39000 pcs
    40HQ: 907 cartons * 100 pcs = 90700 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account