Bathroom Handheld Chrome ABS Water Saving Pressurization Massage Shower Head

Description


Product description:
1. Features: water saving, pressurization, one-piece molding, electroplating like mirror,
2. Surface treatment: chrome plating
3. Material: ABS plastic
4. Caliber: 4 points interface (standard)
5. Operating temperature: 0-70 degrees Celsius
6. Use: shower head replacement head
7. Size: 7.8x24 cm
8. Conversion gear position: the function of the shower paddle can be changed by left and right dialing

Use of showers and faucets:
1. The shower is watered for a long time due to water quality. Environmental factors, the inside of the shower will produce certain scale and impurities.
2. Accumulation of scale and impurities to a certain extent may affect the comfort of your bath.
Even the shower is destructive, so pay attention to proper maintenance and maintenance of the product.

Maintenance of showers and faucets:
1. Removal of scale: Every six months or less, the shower should be removed and placed in a small basin. The surface and interior of the shower should be watered with white vinegar and soaked for 4-6 hours, then cotton rag gently wipe the surface of the shower nozzle: After refilling the joint, pass the water for a while, and let the white vinegar and scale flow out with the water to eliminate or reduce the influence of scale on the shower, and can bring certain sterilization effect.
2. Maintenance of the faucet plating surface: often use a soft cloth to stick a little flour to wipe the shower plating surface, then rinse with water to make the shower surface bright as new.

Precautions:
1. Please pay attention to yourself and the safety of the product when disassembling the shower:
2. The filter gasket is not available. The mesh is too large or too thin. If it is too large, it may not have the effect of filtration. If it is too thin, it may affect the flow. The size of the filter is preferably 40-60 mesh.
3. Do not use strong acid when removing scale, so as not to cause corrosion on the shower surface.
4. Do not disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.
5. The ambient temperature of the shower should not exceed 70C. The high temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower.
6. Therefore, install the shower as far as possible from the electric heat source such as Yuba. The shower can not be installed directly under the Yuba, and the distance should be above 60CM.

Bathroom Handheld Chrome ABS Water Saving Pressurization Massage Shower Head

Product form

SKU: TBD01773940

  • In stock (Processing Time 1 - 72 hours)

€7,38

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Product description:
    1. Features: water saving, pressurization, one-piece molding, electroplating like mirror,
    2. Surface treatment: chrome plating
    3. Material: ABS plastic
    4. Caliber: 4 points interface (standard)
    5. Operating temperature: 0-70 degrees Celsius
    6. Use: shower head replacement head
    7. Size: 7.8x24 cm
    8. Conversion gear position: the function of the shower paddle can be changed by left and right dialing

    Use of showers and faucets:
    1. The shower is watered for a long time due to water quality. Environmental factors, the inside of the shower will produce certain scale and impurities.
    2. Accumulation of scale and impurities to a certain extent may affect the comfort of your bath.
    Even the shower is destructive, so pay attention to proper maintenance and maintenance of the product.

    Maintenance of showers and faucets:
    1. Removal of scale: Every six months or less, the shower should be removed and placed in a small basin. The surface and interior of the shower should be watered with white vinegar and soaked for 4-6 hours, then cotton rag gently wipe the surface of the shower nozzle: After refilling the joint, pass the water for a while, and let the white vinegar and scale flow out with the water to eliminate or reduce the influence of scale on the shower, and can bring certain sterilization effect.
    2. Maintenance of the faucet plating surface: often use a soft cloth to stick a little flour to wipe the shower plating surface, then rinse with water to make the shower surface bright as new.

    Precautions:
    1. Please pay attention to yourself and the safety of the product when disassembling the shower:
    2. The filter gasket is not available. The mesh is too large or too thin. If it is too large, it may not have the effect of filtration. If it is too thin, it may affect the flow. The size of the filter is preferably 40-60 mesh.
    3. Do not use strong acid when removing scale, so as not to cause corrosion on the shower surface.
    4. Do not disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.
    5. The ambient temperature of the shower should not exceed 70C. The high temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower.
    6. Therefore, install the shower as far as possible from the electric heat source such as Yuba. The shower can not be installed directly under the Yuba, and the distance should be above 60CM.

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account