Dual DC Current 12V/24V Solar Controller LCD PWM Photovoltaic Power Generation Controller(20A)

Description

Parameter
1. System voltage: 12V/24V automatic adaptation
2. Rated charging current: 20A
3. Rated discharge current: 10A
4. Photovoltaic voltage: 23V for 12V battery; 46V for 24V battery
5. Boost charging voltage: 14.4V
6. Float voltage: 13.7V (default, adjustable)
7. Discharge cut-off voltage: 10.7V (default value, adjustable)
8. Discharge recovery voltage: 12.6V (default value, adjustable)
9. Charging recovery voltage: 13V
10. Photovoltaic panel: 8V for light-controlled light-on threshold (the light-controlled light has a delay)
11. Photovoltaic panel: 8V for light-controlled turn-off threshold (there is a delay for light-control turn-off)
12. USB output: 2 USB outputs, 5V/2.5A
13. Standby current: less than 10mA
14. Working temperature: -35 to 60 degrees Celsius
15. Size: 125x112x34mm
16. Weight: 179g

Features
1. Adopt industrial-grade main control chip
2. Large-screen LCD display; charging and discharging current display; cumulative power generation and discharge power query; temperature display; light control + delay control; adjustable charging and discharging parameters; with power-off memory and other functions
3. Dual USB output, current up to 2.5A, support Apple mobile phone charging
4. Complete 3-stage charging management
5. Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery and will not damage the controller
6. Anti-backflow circuit, ultra-low heat generation.

System connection
1. Connect the positive and negative poles of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage
2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse them
3. Connect the solar panel to the controller according to the picture

Safe use advice
1. The controller is 12V/24V automatic recognition, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type
2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect normal voltage judgment
3. This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.)
4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source
5. The controller will generate heat during operation, please pay attention to install the controller on a flat and well-ventilated surface

Dual DC Current 12V/24V Solar Controller LCD PWM Photovoltaic Power Generation Controller(20A)

Product form

SKU: TBD0603749601B

  • In stock (Processing Time 1 - 72 hours)

€20,10

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    Parameter
    1. System voltage: 12V/24V automatic adaptation
    2. Rated charging current: 20A
    3. Rated discharge current: 10A
    4. Photovoltaic voltage: 23V for 12V battery; 46V for 24V battery
    5. Boost charging voltage: 14.4V
    6. Float voltage: 13.7V (default, adjustable)
    7. Discharge cut-off voltage: 10.7V (default value, adjustable)
    8. Discharge recovery voltage: 12.6V (default value, adjustable)
    9. Charging recovery voltage: 13V
    10. Photovoltaic panel: 8V for light-controlled light-on threshold (the light-controlled light has a delay)
    11. Photovoltaic panel: 8V for light-controlled turn-off threshold (there is a delay for light-control turn-off)
    12. USB output: 2 USB outputs, 5V/2.5A
    13. Standby current: less than 10mA
    14. Working temperature: -35 to 60 degrees Celsius
    15. Size: 125x112x34mm
    16. Weight: 179g

    Features
    1. Adopt industrial-grade main control chip
    2. Large-screen LCD display; charging and discharging current display; cumulative power generation and discharge power query; temperature display; light control + delay control; adjustable charging and discharging parameters; with power-off memory and other functions
    3. Dual USB output, current up to 2.5A, support Apple mobile phone charging
    4. Complete 3-stage charging management
    5. Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery and will not damage the controller
    6. Anti-backflow circuit, ultra-low heat generation.

    System connection
    1. Connect the positive and negative poles of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage
    2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse them
    3. Connect the solar panel to the controller according to the picture

    Safe use advice
    1. The controller is 12V/24V automatic recognition, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type
    2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect normal voltage judgment
    3. This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.)
    4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source
    5. The controller will generate heat during operation, please pay attention to install the controller on a flat and well-ventilated surface

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account