HABOTEST HT95A-SL5 Digital Voltage Tester Flathead Screwdriver 6V-390V AC Non-Contact Voltage Detector Pen


1. Combines a high-hardness Lovan alloy steel screwdriver bit with a smart digital AC voltage tester. Built for ultimate durability and wear resistance, allowing you to quickly tighten or loosen screws on circuit breakers, outlets, and home appliances while performing electrical safety testing.
2. Powered by an upgraded responsive smart chip, this tester measures AC voltage from 6V up to 390V (50/60Hz). The high-definition LCD screen automatically lights up Green for normal status (--U) and Red with an audible buzzer alarm (HI) when high voltage is detected.
3. Insert the probe into sockets to instantly identify neutral lines and live lines. Trace along insulated wires in NCV mode to locate broken wires—the signal disappears immediately once passing the circuit breakpoint.
4. Features a protective insulated sleeve over the shaft to prevent short-circuit accidents in crowded electrical boxes. Even when batteries are completely depleted, touching a live conductor will still trigger an emergency high-voltage warning icon on screen.
5. Crafted with non-slip PP+TPE soft rubber secondary injection molding, weighing only 70g for effortless pocket carry. Automatically powers down after 5 minutes of inactivity to conserve battery life, with a 10-second anti-accidental touch protection feature.

Parameters:
1. Shell Material: PP + TPE dual-color injection overmolding
2. Bit Material: High-hardness alloy steel
3. AC Voltage Detection: Detection range: 6V - 390V, 50/60Hz
4. Measurement Accuracy: 6V - 390V: +/-(5%+5)
5. NCV Non-Contact Sensing: Safely senses AC voltage through air without touching wires or live exposed conductors
6. Live / Neutral Wire Identification: Socket measurement: Neutral wire displays --U (green backlight); Live wire displays HI (red backlight + buzzer alarm)
7. Data Hold: Automatically locks display reading after releasing button following AC voltage measurement for easy viewing and recording
8. No-Power Testing / Emergency Power-Off Sensing: Displays high-voltage warning icon on screen when touching live wire, even with depleted batteries
9. Anti-Mistouch Power Off: Pressing and holding power button for about 10 seconds is recognized as accidental activation and powers off; press and hold again to power on
10. Breakpoint Finding: Senses along live wire, displaying --U at close range and HI where signal is strong; signal disappears after passing breakpoint
11. Auto Power-Off: Automatically turns off after 5 minutes of no signal detection or operation to extend battery life
12. Low Battery Indicator: Low battery icon appears on screen to prompt timely battery replacement
13. Display: HD LCD dual-color backlit display (Green normal / Red warning)
14. Alarm Method: Red backlight turns on + buzzer audible alarm (Di Di Di)
15. Operating Temperature: 0 to 40 deg C
16. Operating Humidity: Less than or equal to 95% RH
17. Operating Altitude: Less than or equal to 2000 meters
18. Power Supply: 3 x 1.5V LR44 button cell batteries
19. Product Dimensions: Overall length: 201 mm, shaft length: 92 mm, handle length: 109 mm, handle diameter: 30 mm
Specification:
Package Weight
One Package Weight 0.09kgs / 0.21lb
One Package Size 23cm * 7cm * 6cm / 9.06inch * 2.76inch * 2.36inch
Qty per Carton 200
Carton Weight 19.50kgs / 42.99lb
Carton Size 46cm * 43cm * 35cm / 18.11inch * 16.93inch * 13.78inch
Loading Container 20GP: 385 cartons * 200 pcs = 77000 pcs
40HQ: 894 cartons * 200 pcs = 178800 pcs

HABOTEST HT95A-SL5 Digital Voltage Tester Flathead Screwdriver 6V-390V AC Non-Contact Voltage Detector Pen

Product form

SKU: TBD0607133201

  • In stock (Processing Time 1 - 72 hours)

€14,78

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Combines a high-hardness Lovan alloy steel screwdriver bit with a smart digital AC voltage tester. Built for ultimate durability and wear resistance, allowing you to quickly tighten or loosen screws on circuit breakers, outlets, and home appliances while performing electrical safety testing.
    2. Powered by an upgraded responsive smart chip, this tester measures AC voltage from 6V up to 390V (50/60Hz). The high-definition LCD screen automatically lights up Green for normal status (--U) and Red with an audible buzzer alarm (HI) when high voltage is detected.
    3. Insert the probe into sockets to instantly identify neutral lines and live lines. Trace along insulated wires in NCV mode to locate broken wires—the signal disappears immediately once passing the circuit breakpoint.
    4. Features a protective insulated sleeve over the shaft to prevent short-circuit accidents in crowded electrical boxes. Even when batteries are completely depleted, touching a live conductor will still trigger an emergency high-voltage warning icon on screen.
    5. Crafted with non-slip PP+TPE soft rubber secondary injection molding, weighing only 70g for effortless pocket carry. Automatically powers down after 5 minutes of inactivity to conserve battery life, with a 10-second anti-accidental touch protection feature.

    Parameters:
    1. Shell Material: PP + TPE dual-color injection overmolding
    2. Bit Material: High-hardness alloy steel
    3. AC Voltage Detection: Detection range: 6V - 390V, 50/60Hz
    4. Measurement Accuracy: 6V - 390V: +/-(5%+5)
    5. NCV Non-Contact Sensing: Safely senses AC voltage through air without touching wires or live exposed conductors
    6. Live / Neutral Wire Identification: Socket measurement: Neutral wire displays --U (green backlight); Live wire displays HI (red backlight + buzzer alarm)
    7. Data Hold: Automatically locks display reading after releasing button following AC voltage measurement for easy viewing and recording
    8. No-Power Testing / Emergency Power-Off Sensing: Displays high-voltage warning icon on screen when touching live wire, even with depleted batteries
    9. Anti-Mistouch Power Off: Pressing and holding power button for about 10 seconds is recognized as accidental activation and powers off; press and hold again to power on
    10. Breakpoint Finding: Senses along live wire, displaying --U at close range and HI where signal is strong; signal disappears after passing breakpoint
    11. Auto Power-Off: Automatically turns off after 5 minutes of no signal detection or operation to extend battery life
    12. Low Battery Indicator: Low battery icon appears on screen to prompt timely battery replacement
    13. Display: HD LCD dual-color backlit display (Green normal / Red warning)
    14. Alarm Method: Red backlight turns on + buzzer audible alarm (Di Di Di)
    15. Operating Temperature: 0 to 40 deg C
    16. Operating Humidity: Less than or equal to 95% RH
    17. Operating Altitude: Less than or equal to 2000 meters
    18. Power Supply: 3 x 1.5V LR44 button cell batteries
    19. Product Dimensions: Overall length: 201 mm, shaft length: 92 mm, handle length: 109 mm, handle diameter: 30 mm
    Specification:
    Package Weight
    One Package Weight 0.09kgs / 0.21lb
    One Package Size 23cm * 7cm * 6cm / 9.06inch * 2.76inch * 2.36inch
    Qty per Carton 200
    Carton Weight 19.50kgs / 42.99lb
    Carton Size 46cm * 43cm * 35cm / 18.11inch * 16.93inch * 13.78inch
    Loading Container 20GP: 385 cartons * 200 pcs = 77000 pcs
    40HQ: 894 cartons * 200 pcs = 178800 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account